Investigation of isothiocyanate addition to alkylidene derivatives of malononitrile and cyanoacetic acid esters

Addition of arylisothiocyanates to active methylene compounds leads to a variety of compounds depending on the structure of the starting material and conditions used to conduct the addition. Addition of arylisothiocyanate to 1c leads to a pyrido[2,3-d]pyrimidine resulting from addition of a second mole of cyanate to the initial adduct. Addition of arylisothiocyanate to 1b led to a mixture of pyridine and thiopyran adducts, while addition to 1a led to open chain structures.     

Static fatigue fracture of polyethylene: A morphological analysis

The fracture properties of a number of high-density polyethylenes were evaluated and related to their morphology. The resistance to initiation of fracture is related to the resistance to voiding of the materials and the rate of coalescence of voids. The propensity of the materials to void has been shown to be related to the size of the amorphous region. The resistance to propagation of the fracture is also related to the above factors as well as the ease of stretching and rupture of fibrils. The ease of fibril formation has been shown to be related to the degree of perfection of the crystallites.     

A new method for estimating the importance of hydrogen-bonding groups in the binding site of a protein

We introduce a new method to estimate the importance of hydrogen-bonding sitepoints in the binding site of a protein as part of a structure-based design strategy. Our method identifies hydrogen-bonding sitepoints within a binding pocket and ranks them according to both the accessibility of their hydrogen bonding regions to incoming ligands and their hydrogen-bonding strength. The combination of these components produces a prioritised list of sitepoints that are more likely to be involved in hydrogen bonding with an incoming ligand. A dataset of known protein-ligand interactions was used to compare the prioritisation of sitepoints identified by our method with those observed to be engaged in hydrogen bonding in their crystal structures. Our method was able to remove those sitepoints unable to bind the ligand due to a low accessibility or an unfavourable orientation and to award significantly higher hydrogen-bonding ranking values to those sitepoints observed to form hydrogen bonds. Our method can thus be used to identify hydrogen-bonding sitepoints that should be targeted preferentially in a drug design strategy.     

Curvature Effects in the Analysis of Pendant Bubble Data: Comparison of Numerical Solutions, Asymptotic Arguments, and Data

The pendant bubble method is commonly used to measure the evolution of the surface tension of surfactant solutions. Initially, the bubble interface is free of adsorbed surfactant. As time progresses, surfactant diffuses to the interface, adsorbs, and reduces the surface tension. The surface tension is assumed to be in equilibrium with the instantaneous surface concentration. Therefore, surface tension data are analyzed in terms of interfacial thermodynamics and mass transfer models in order to infer the mechanisms which determine the surfactant transport. Diffusion from the bulk solution to the bubble can be approximated as diffusion to a spherical interface. Approximating this process as diffusion to a plane introduces significant errors into the data analysis. Mass transfer to a sphere differs from that to a plane; the equilibration of the spherical interface is more rapid simply because of geometry. The failure to account for this effect in the interpretation of pendant bubble data can lead to serious errors in the transport coefficients for the surfactants. In the diffusion-controlled limit, surfactant diffuses to the sublayer immediately adjacent to the interface and adsorbs in local equilibrium according to the adsorption isotherm. There is a closed-form solution for Fick's law describing adsorption to a sphere in an infinite solution which reduces to the Ward and Tordai solution when the bubble radius is large. This equation, along with the adsorption isotherm relating the surface concentration and the sublayer concentration, must be solved numerically in order to solve for the time evolution of the surface concentration. At early times, the adsorption isotherm can be expanded about the clean interface state. At long times, small departures from the equilibrium state can be assumed. In these limits, asymptotic expansions can be obtained. The short- and long-time expansions are found in this study for adsorption to a sphere and compared to those obtained previously for adsorption to a planar interface. In particular, the long-time asymptote for adsorption to a sphere is proportional to t(-3/2); this asymptote differs significantly from that for adsorption to a plane, which goes as t(-1/2). The full solution for adsorption to a sphere is compared to the Ward and Tordai solution for adsorption to a planar interface. From a comparison of the full solutions, it is established that curvature cannot be neglected unless the ratio of the adsorption depth to the bubble radius is negligible. This ratio can be calculated a priori from equilibrium isotherm parameters. Using constants which describe the surfactant C(12)E(8), for which curvature plays a strong role in the surfactant adsorption dynamics, the short- and long-time solutions for adsorption to the interface are compared to the full solutions and to dynamic surface tension data to infer the range of validity of the approximations. Copyright 2001 Academic Press.     

Hygienic aspects related to burial

Burial grounds are generally provided by local authorities in cemeteries (subject to planning consent and to compliance with any considerations for environmental health). Their design has been submitted to studies of hydrogeological characteristics of soil with regard to its ability to purify wastewater coming from corpse decomposition, its ability to avoid the infiltration of pollutants in groundwater, and its ability to skeletonize buried corpses within the given times foreseen by the law in force. Greater environmental awareness has necessitated that new and existing burial grounds are assessed to determine the environmental load which they could release to soil or any downstream component. This problem arises in countries where there is a high density of built-up areas, a custom of disposing of the dead by burial, a lack of available spaces and suitable soils to designate as burial grounds. This paper reports some results from a study carried out on ground lands of Italy in order to revise articles 82 and 83 of the Decree No 285 of 1990 in force in relation to burial grounds. Soil permeability to water and air is a parameter of critical importance in relation to purification and/or diffusion of leachates from inhumed corpses in the soil, and in relation to its influence on the time necessary to completely skeletonize a human corpse.     

Gel formation in free radical polymerization via chain transfer and terminal branching

Gel formation in free-radical polymerization via chain transfer to polymer, recombination termination, and terminal branching due to either chain transfer to monomer or disproportionation termination is investigated using the method of moments. It is found that no gel can possibly form in the systems consisting of initiation, propagation, and one of the above reactions. However, systems with the following combination of reactions are found to be capable of gelling. They are: chain transfer to polymer + recombination termination; chain transfer to polymer + terminal branching due to disproportionation termination; and terminal branching due to transfer to monomer + recombination termination. Systems with the following combination of reactions are incapable of gelling; transfer to polymer + terminal branching due to transfer to monomer; and terminal branching due to disproportionation termination + recombination termination. An examination of the gelation mechanisms reveals that the formation of multivinyl macromonomers during the course of polymerization is the reason that systems involving terminal branching gel. Sol/gel diagrams are generated to give critical kinetic parameters required for gelation. It is found that terminal branching does not always promote gelation due to the adverse effect on chain length through chain transfer to monomer and termination by disproportionation, reactions which generate terminal double bonds. © 1994 John Wiley & Sons, Inc.     

Electrochemical approaches for the detection of amyloid-β, tau,and α-synuclein

According to the World Health Organization, there are 47 million people worldwide who are afflicted with dementia today, and this is expected to rise to 132 million by 2050. Therefore, it is pertinent to develop efficient analytical methods such as electrochemical biosensors to study these disorders and diagnose them early. This review highlights some of the recent key developments in the use of electrochemical biosensors to study the biomarkers related to neurodegenerative diseases such as Alzheimer's disease and Parkinson's disease. Especially, we focus on the applications of electrochemistry to analyze amyloid-β and tau related to Alzheimer's disease and α-synuclein related to Parkinson's disease.     

Precision of Flash Pyrolysis-GC-MS Analysis: Experimental Evaluation of the Sources of Variability

The present study was carried out to evaluate the precision and to identify significant sources of variability in flash pyrolysis-GC-MS experiments. The analysis of variance has been applied to the example of polyethylene pyrolysis to estimate the impact of several controlled factors: sample handling, flash pyrolysis filament ageing and calibration. It was demonstrated that to get the best precision in experimental results, it is recommended to set the operator to reduce the impact of sample handling procedure and the filament to avoid variability due to changes in filament characteristics. In comparison, filament ageing and filament calibration are shown to influence in a limited extent the experimental results.     

Diazo compounds for the bioreversible esterification of proteins

A diazo compound is shown to convert carboxylic acids to esters efficiently in an aqueous environment. The basicity of the diazo compound is critical: low basicity does not lead to a reaction but high basicity leads to hydrolysis. This reactivity extends to carboxylic acid groups in a protein. The ensuing esters are hydrolyzed by human cellular esterases to regenerate protein carboxyl groups. This new mode of chemical modification could enable the key advantages of prodrugs to be translated from small-molecules to proteins.     

Identification of ligands that target the HCV-E2 binding site on CD81

Hepatitis C is a global health problem. While many drug companies have active R&D efforts to develop new drugs for treating Hepatitis C virus (HCV), most target the viral enzymes. The HCV glycoprotein E2 has been shown to play an essential role in hepatocyte invasion by binding to CD81 and other cell surface receptors. This paper describes the use of AutoDock to identify ligand binding sites on the large extracellular loop of the open conformation of CD81 and to perform virtual screening runs to identify sets of small molecule ligands predicted to bind to two of these sites. The best sites selected by AutoLigand were located in regions identified by mutational studies to be the site of E2 binding. Thirty-six ligands predicted by AutoDock to bind to these sites were subsequently tested experimentally to determine if they bound to CD81-LEL. Binding assays conducted using surface Plasmon resonance revealed that 26 out of 36 (72 %) of the ligands bound in vitro to the recombinant CD81-LEL protein. Competition experiments performed using dual polarization interferometry showed that one of the ligands predicted to bind to the large cleft between the C and D helices was also effective in blocking E2 binding to CD81-LEL.     

NMR spectroscopic study of the Murex trunculus dyeing process

It is widely accepted that indigo dyes derived from Murex trunculus were used to produce the biblical dyes tekhelet and argaman. We describe a method of following the debromination of natural leucoindigos and their binding to wool using NMR spectroscopy. Debromination is observed prior to reaction with the wool and prior to oxidation. Binding to the wool is shown to occur prior to oxidation. NMR allows the dyeing process to be followed. This, in principle, could be used to correct problems during dyeing that would increase the reliability of the process.     

How mobile NMR can help with the conservation of paintings

The conservation of paintings is fundamental to ensure that future generations will have access to the ideas of the grand masters who created these art pieces. Many factors, such as humidity, temperature, light, and pollutants, pose a risk to the conservation of paintings. To help with painting conservation, it is essential to be able to noninvasively study how these factors affect paintings and to develop methods to investigate their effects on painting degradation. Hence, the use of mobile nuclear magnetic resonance (NMR) as a method of investigation of paintings is gaining increased attention in the world of Heritage Science. In this mini-review, we discuss how this method was used to better understand the stratigraphy of paintings and the effect different factors have on the painting integrity, to analyze the different cleaning techniques suitable for painting conservation, and to show how mobile NMR can be used to identify forgeries. It is also important to keep in mind its limitations and build upon this information to optimize it to extend its applicability to the study of paintings and other precious objects of cultural heritage.     

Multiple‐injection high‐throughput gas chromatography analysis

Multiple‐injection techniques have been shown to be a simple way to perform high‐throughput analysis where the entire experiment resides in a single chromatogram, simplifying the data analysis and interpretation. In this study, multiple‐injection techniques are applied to gas chromatography with flame ionization detection and mass detection to significantly increase sample throughput. The unique issues of implementing a traditional “Fast” injection mode of multiple‐injection techniques with gas chromatography and mass spectrometry are discussed. Stacked injections are also discussed as means to increase the throughput of longer methods where mass detection is unable to distinguish between analytes of the same mass and longer retentions are required to resolve components of interest. Multiple‐injection techniques are shown to increase instrument throughput by up to 70% and to simplify data analysis, allowing hits in multiple parallel experiments to be identified easily.     

A second-order perturbation theory route to vibrational averages and transition properties of molecules: general formulation and application to infrared and vibrational circular dichroism spectroscopies

A general formulation to compute anharmonic vibrational averages and transition properties at the second-order of perturbation theory is derived from the Rayleigh-Schro?dinger development. This approach is intended to be applicable to any property expanded as a Taylor series up to the third order with respect to normal coordinates or their associated momenta. The equations are straightforward to implement and can be easily adapted to various properties, as illustrated for the case of electric and magnetic dipole moments. From those, infrared and vibrational circular dichroism spectra can be readily obtained. This fully automatic procedure has been applied to several chiral molecules of small-to-medium sizes and compared to the standard double harmonic approximation and to experimental data.     

半夏淀粉的理化特性

研究了不同产地的4种半夏淀粉的理化特性,包括直链淀粉含量、膨胀度、溶解性、持水性、淀粉粒大小和形貌、结晶类型、热特性和糊化特性等。结果表明,这些半夏淀粉中直链淀粉含量为18.60%～23.91%;膨胀度21.53%～23.09%;溶解度11.5%～32.3%;持水性100.3%～119.0%。淀粉粒单粒球形,卵形或圆半球形,直径2～20μm,复粒由2～3个分粒组成,其结晶类型均为C型,结晶度15.0%～37.9%。用差示扫描量热仪测得的转变温度TO、TP和TC分别为71.58～77.75℃、83.03～83.84℃和89.41～90.99℃,热焓为4.316～5.809 J/g。用快速粘度分析仪测定了4种半夏淀粉的糊化特征值:峰值粘度、热糊粘度、冷糊粘度、稀懈值和回复值分别为149.5～226.2、97.7～127.2、141.8～194.3、50.4～99.0和44.2～67.2 RVU。糊化温度77.8～79.9℃,峰值时间8.3～8.7 min。     

Emergences of supramolecular chemistry: from supramolecular chemistry to supramolecular science

We describe the field of supramolecular chemistry as a consequence of the progress of chemistry from its premises to recent achievements. Supramolecular chemistry has been claimed to be an emergent field of research taking its roots in chemistry. According to the definitions of emergences related to hierarchy or more recently to scope, supramolecular chemistry is shown to have bottom-up or top-down emergences. The bottom-up emergence, directly related to hierarchy by definition, opens up the world of nanochemistry and nanomaterials while the top-down one, attributable to scope due to the implication of supramolecular chemistry in other fields of research, open the world of supramolecular biochemistry. Both emergences lead supramolecular chemistry to become a supramolecular science. Combining supramolecular chemistry with biology opens new direction in the study of life and it origin.     

Advanced Reprocessing Developments in Europe Status on European Projects ACSEPT and ACTINET-I3

Nuclear energy has more than ever to demonstrate that it can contribute safely and on a sustainable way to answer the international increase in energy needs. Actually, in addition to an increased safety of the reactors themselves, its acceptance is still closely associated to our capability to reduce the lifetime of the nuclear waste, to manage them safely and to propose options for a better use of the natural resources. Spent fuel reprocessing can help to reach these objectives. At the European level, ACSEPT and ACTINET-I3 have worked together to improve our knowledge in actinide chemistry and advanced separation process development.     

卡尔费休滴定法测定液体推进剂混胺燃料中水分

液体推进剂混胺燃料中作为主要组分存在的三乙胺使其显示较高的碱性,对用卡尔费休滴定法测定其水分含量时产生干扰。提出了在试样的甲醇滴定介质中加入一定量的乙酸,保持液体混胺试样和乙酸的体积比小于或等于3比5,达到使滴定介质的酸度控制在最佳pH范围5～6之间。经此操作,由三乙胺的高碱度引起的干扰可消除。对已知水分含量的混胺试样按方法进行分析,算得其水分测定值的相对标准偏差(n=12)为2.1%。取不同批号的混胺试样7件,按方法进行分析并用标准气量法对结果进行校核。两种方法测定结果的相对偏差在-0.023%～0.033%之间。又根据t-检验法的结果认定,两方法所得测定值之间不存在显著差异。     

Addition of some α-halo ethers to unsaturated compounds

Summary The addition was carried out of 2-acetoxyethyl chloromethyl ether and of 2-chloroethyl chloromethyl ether to isobutene, to allyl chloride, to styrene, and to allyl acetate and also of 2-acetoxyethyl chloromethyl ether to butadiene and to ethyl cinnamate.