Chemical synthesis and characterization of poly(aniline‐co‐ethyl 3‐aminobenzoate) copolymers

Copolymers of aniline and ethyl 3‐aminobenzoate (3EAB) were synthesized by chemical polymerization in several mole ratios of aniline to functionalized aniline, and their physicochemical properties were compared to those of poly(aniline‐co‐3‐aminobenzoic acid) (3ABAPANI) copolymers. The copolymers were characterized with UV–vis, FTIR, Raman, SEM, EPR, and solid‐state NMR spectroscopy, elemental analysis, and conductivity measurements. The influence of the carboxylic acid and ester group ring substituents on the copolymers was investigated. The spectroscopic studies confirmed incorporation of 3ABA or 3EAB units in the copolymers and hence the presence of C?O group in the copolymer chains. The conductivity and EPR signals both decreased with increasing 3EAB content of the copolymers emeraldine salt (ES) form. The conductivity of the ES form of 3ABAPANI was found to be high (1.4 × 10^?1 S cm^?1) compared with the conductivity (10^?2–10^?3 S cm^?1) of 3EABPANI (ES) copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1339–1347, 2010     

Synthesis of novel fluorescent molecule and its polymeric form with aniline as fluorescent and supercapacitor electrode materials

In this study, a fluorescent material, 2‐naphthyl‐4‐amino benzoate, is synthesized by the esterification of 4‐aminobenzoic acid with 2‐naphthol. This molecule is used in the bulk polymerization of aniline, which results in the formation of poly(aniline‐2‐naphthyl‐4‐aminobenzoate). For comparison, polyaniline and also poly(aniline‐4‐aminobenzoic acid) salts are prepared via bulk polymerization. Formation and properties of these polymeric materials are evaluated by Fourier‐transform infrared (FT‐IR), ¹³C nuclear magnetic resonance, matrix‐assisted laser desorption ionization, UV‐Vis, Fluorescence, X‐ray diffraction (XRD), Field emission‐scanning electron microscopy (FE‐SEM), Differential scanning calorimetry (DSC), thermogravimetric analysis, electrical resistance and electrochemical techniques. P(ANI‐2NA4ABA) is obtained in nanofiber morphology in 106 wt% yield with respect to the amount of aniline used with comparable conductivity of conventional polyaniline salts. This polymer salt is stable up to 220°C and indicates melting at 146°C on heating and crystal formation at 128°C on cooling. This polymer shows higher wavelength fluorescence compared to the conventional polyaniline salts. This polymer is used as an electrode material without binder, which shows a specific capacitance of 360 F g^?1 at 0.25 A g^?1.     

Synthesis of achiral PEG‐PANI rod‐coil block copolymers and their helical superstructures

Poly(ethylene glycol) (PEG) was modified with aniline groups at both the end, and then PEG‐PANI rod‐coil block polymers have been synthesized by polymerization of the aniline with the aniline‐modified PEG. FTIR, NMR, and elemental analysis provided the chemical strucutre of the as‐prepared polymers. The achiral rod‐coil copolymer could form different superstructures by means of self‐assembly when adding diethyl ether into its THF solution and the length of PANI segments is a key factor to the superstructures. AFM measurements revealed that they form spring‐like helical superstructures from the short PANI‐containing copolymers while these form fibrous helical superstructures from the longer PANI‐containing copolymer. A possible mechanism of the helical superstructures is suggested in this article and the driving force is believed the π–π stacking of the rigid segment of the copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 12–20, 2008     

Synergistic effect of copolymers composition on the electrochemical,thermal, and electrical behavior of 5‐lithiosulphoisophthalic acid doped poly(aniline‐co‐2‐isopropylaniline): synthesis,characterization, and applications

The paper reports the synergistic effect of substituent, i.e. isopropyl group on electrical, thermal, and processability of polyaniline in the presence of 5‐lithiosulphoisophthalic acid (LiSIPA). The presence of substituent not only affects the electrochemical redox behavior of polyaniline but also brings changes in the optical and electronic properties of polyaniline. Evaluation of the copolymers as corrosion inhibitor for iron in 1.0 N HCl using electrochemical impedance spectroscopy and Tafel extrapolation method shows that the copolymers and homopolymer show corrosion inhibition efficiency ranging from 69 to 80% depending upon the composition of the copolymers. The copolymers doped with LiSIPA were soluble in organic solvents like methanol, ethanol, isopropanol, N‐methyl pyrrolidinone, and chloroform. The compositions of the copolymers were determined by ¹H NMR spectroscopy. The conductivity of the polymers was found to be in the order of 4.9 to 10^?3 S cm^?1 depending upon the comonomer ratios and concentration of dopant. Cyclic voltammetry of the copolymers shows a shift in peak potential value from 0.157 to 0.398 V when the monomer ratio of aniline to 2‐isopropylaniline in the polymerization reaction was changed from 0.9:0.1 to 0.5:0.5. The polymers were characterized by FTIR and UV‐visible spectroscopy, NMR, X‐ray diffraction, TGA, DSC, and cyclic voltammetry. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline)s as novel water‐soluble conducting copolymers

Various densely grafted polymers containing poly(aniline‐2‐sulfonic acid‐co‐aniline)s as side chains and polystyrene as the backbone were prepared. A styryl‐substituted aniline macromonomer, 4‐(4‐vinylbenzoxyl)(N‐tert‐butoxycarbonyl)phenylamine (4‐VBPA‐^tBOC), was first prepared by the reaction of 4‐aminophenol with the amino‐protecting moiety di‐tert‐butoxyldicarbonate, and this was followed by substitution with 4‐vinylbenzyl chloride. 4‐VBPA‐^tBOC thus obtained was homopolymerized with azobisisobutyronitrile as an initiator, and this was followed by deprotection with trifluoroacetic acid to generate poly[4‐(4‐vinylbenzoxyl)phenylamine] (PVBPA) with pendent amine moieties. Second, the copolymerization of aniline‐2‐sulfonic acid and aniline was carried out in the presence of PVBPA to generate densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline). Through the variation of the molar feed ratio of aniline‐2‐sulfonic acid to aniline, various densely grafted copolymers were generated with different aniline‐2‐sulfonic acid/aniline composition ratios along the side chains. The copolymers prepared with molar feed ratios greater than 1/2 were water‐soluble and had conductivities comparable to those of the linear copolymers. Furthermore, these copolymers could self‐dope in water through intermolecular or intramolecular interactions between the sulfonic acid moieties and imine nitrogens, and this generated large aggregates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1090–1099, 2005     

Polyaniline and its modification for electroresponsive material under applied electric fields

Polyaniline (PANI) and its various copolymers were synthesized using different monomers such as o‐methyl‐, o‐methoxy‐, o‐ethyl‐, o‐ethoxyaniline and sodium diphenylamine sulfonate by the chemical oxidation polymerization as air‐stable organic conducting polymers, and adopted as one of the most potential materials of electrorheological (ER) fluids, especially for the anhydrous system. A relatively low density, a controllable conductivity, and thermal stability are advantages of the PANI based ER system compared with other ER materials. An FT‐IR analysis was adopted to confirm their synthesis and a scanning electron microscopy (SEM) analysis indicated the shape of PANI derivatives was irregular. The effect of functional group of PANI on electric and electroresponsive properties of poly(aniline‐co‐ethoxyaniline) (COPA) particles were examined. A universal scaling equation of the yield stress was applied to these ER fluids and it was found that all data were collapsed successfully onto a single curve regardless of monomer type of the polyaniline synthesized. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and properties of processable conducting copolymers from N‐ethylaniline with aniline

Copolymers were synthesized through the chemically oxidative polymerization of N‐ethylaniline (EA) and aniline (AN) in five acid aqueous media. The polymerization yield, intrinsic viscosity, molecular weight, solubility, solvatochromism, electrical conductivity, and mechanical properties of the copolymer films were systematically studied through changes in the comonomer ratio, polymerization temperature, oxidant, oxidant/monomer ratio, and acid medium. Open‐circuit‐potential and temperature measurements of the polymerization solutions showed that the polymerization rate depended on the EA content, and the polymerization was an exothermic reaction. The resultant copolymers were characterized in detail with IR, ultraviolet–visible, and ¹H NMR spectroscopy, gel permeation chromatography, wide‐angle X‐ray diffractometry, and scanning electron microscopy. The reactivity ratios of the monomer pair were calculated from the ¹H NMR spectra of the copolymers formed at a low conversion. The polymers exhibited good solubility and interesting solvatochromism in most of the solvents and variable conductivity with the EA/AN ratio and doping state. The conductivity of the HCl‐doped copolymers increased monotonically from 5.61 × 10^?7 to 2.55 × 10^?1 S/cm with decreasing EA content from 100 to 0 mol % and showed a percolation transition between EA concentrations of 20 and 30 mol %. The EA/AN copolymers also had excellent film formability and flexibility together with high mechanical and oxygen‐enriching properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6109–6124, 2004     

Synthesis and Characterization of Polymeric Acid‐Doped Polyaniline Interpenetrating Polymer Networks

Polyaniline (PANI)/poly(2‐acrylamido‐2‐methylpropane sulfonic acid) (PAMPS) semi‐interpenetrating network polymers (semi‐IPNs) were prepared using the simultaneous method. The formation and properties of the interpenetrating PANI/PAMPS semi‐IPNs were investigated using Fourier transform infrared spectroscopy, X‐ray diffraction, solid‐state ¹³C‐NMR, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The interaction of PAMPS with PANI as a polymeric acid dopant was also investigated. These semi‐IPNs had a different microstructure compared to that of pure PANI. Packing structures and several decomposition steps were ordered for each semi‐IPN, while pure PANI exhibits a single amorphous peak and one decomposition step. The NMR spectra show that these peaks broaden and shifted downfield in the semi‐IPNs. A thermal reaction between PANI and PAMPS was observed using DSC and TGA, and the data from the two techniques are in agreement.     

Comparative study of 2‐amino and 3‐aminobenzoic acid copolymerization with aniline synthesis and copolymer properties

Polyanilines soluble in an aqueous basic medium were synthesised by copolymerization of aniline (ANI) with both 2 and 3‐aminobenzoic acids (ABA). Different composition copolymers were prepared by varying the ANI/ABA feed ratio. Poly(aniline‐co‐2‐aminobenzoic acid) (PANI2ABA) and poly(aniline‐co‐3‐aminobenzoic acid) (PANI3ABA) displayed differences in their properties, such as specific charge and fluorescence behavior because the reactivity of 2‐aminobenzoic (2ABA) and 3‐aminobenzoic (3ABA) acids are very different. The new materials were characterized by X‐ray photoelectron, Fourier transform infrared, and Raman spectroscopies. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5587–5599, 2004     

Synthesis of PANI and Study of Morphology in the Process of Polymerization

The polyaniline micro/nanostructure was prepared by a self‐assembly process with molybdic acid as dopants in the presence of ammonium persulfate as the oxidant. It was found that the morphology of PANI micro/nanostructure was affected by the concentration of the dopant, that is, the morphology of PANI changed from nanofibers to co‐existence of nanofibers and microspheres as the molar ratio of molybdic acid to aniline varied from 0.01 to 1.5. Under the same condition it was also found that the conductivity value of PANI enhanced from 4.58×10^?3 S·cm^?1 to 3.8×10^?1 S·cm^?1. The structure of PANI was characterized by FTIR and XRD which confirmed the presence of the molybdic acid in the PANI. The electrochemical characteristics of the PANI nanofibers were investigated by means of cyclic voltammetry. The morphology of PANI in the process of polymerization was characterized by SEM. It was found that when the molar ratio of molybdic acid to aniline was 0.3, the morphology of PANI was co‐existence of nanofibers and microspheres and the formation of microspheres was ahead of the nanofibers.     

Copolymers of 2‐[(5‐Methylisoxazol‐3‐yl)amino]‐2‐oxo‐ethyl Methacrylate with Ethyl Methacrylate: Monomer Reactivity Ratios,Thermal Properties and Antimicrobial Activity

We report the monomer reactivity ratios for copolymers of ethyl methacrylate (EMA) and a reactive monomer, 2‐[(5‐methylisoxazol‐3‐yl)amino]‐2‐oxo‐ethyl methacrylate (IAOEMA), using the Fineman‐Ross, Kelen‐Tüdös, and a nonlinear error invariable model method using a computer program RREVM. Copolymers were obtained by radical polymerization initiated by α,α'‐azobisisobutyronitrile in 1,4‐dioxane solution and were analyzed by FTIR, ¹H‐NMR, and gel permeation chromatography. Elemental analysis was used to determine the molar fractions of EMA and IAOEMA in the copolymers. The reactivity ratios indicated a tendency toward ideal copolymerization. The polydispersity indices of the polymers determined using gel permeation chromatography suggest a strong tendency for chain termination by disproportionation. Thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. It was observed that glass transition temperature of copolymers increased with increasing of IAOEMA content in copolymers. Also, the apparent thermal decomposition activation energies (ΔE_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance. The homo‐ and copolymers were tested for their antimicrobial properties against selected microorganisms. All the products show moderate activity against different strains of bacteria, fungi and yeast.     

Thermo‐ and pH‐responsive gradient and block copolymers based on 2‐(2‐methoxyethoxy)ethyl methacrylate synthesized via atom transfer radical polymerization and the formation of thermoresponsive surfaces

A series of gradient and block copolymers, based on 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA) and tert‐butyl acrylate (^tBA), were synthesized by atom transfer radical polymerization (ATRP) in a first step. The MEO₂MA monomer leads to the production of thermosensitive polymers, exhibiting lower critical solution temperature (LCST) at around room temperature, which could be adjusted by changing the proportion of ^tBA in the copolymer. In a second step, the tert‐butyl groups of ^tBA were hydrolyzed with trifluoroacetic acid to form the corresponding block and gradient copolymers of MEO₂MA and acrylic acid (AA), which exhibited both temperature and pH‐responsive behavior. These copolymers showed LCST values strongly dependent on the pH. At acid pH, a slightly decrease of LCST with an increase of AA in the copolymer was observed. However, at neutral or basic conditions, ionization of acid groups increases the hydrophilic balance considerably raising the LCST values, which even become not observable over the temperature range under study. In the last step, these carboxylic functionalized copolymers were covalently bound to biocompatible and biodegradable films of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) [P(HB‐co‐HHx)] obtained by casting and, previously treated with ethylenediamine (ED) to render their surfaces with amino groups. Thereby, thermosensitive surfaces of modified P(HB‐co‐HHx) could be obtained. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of rigid functional anionic polyelectrolytes: Block copolymers and star homopolymers

Seven cyclolinear polymers bearing the tertiary‐butyl α‐(hydroxymethyl)acrylate (TBHMA) ether dimer were prepared using reversible addition–fragmentation chain transfer (RAFT) polymerization. Of the seven polymers, five were cyclolinear homopolymers of the TBHMA ether dimer with different degrees of polymerization, one was an “arm‐first” star homopolymer, and the other was an amphiphilic linear copolymer based on the positively ionizable hydrophilic 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and the TBHMA ether dimer. For comparison, two more polymers were prepared using RAFT polymerization where the TBHMA ether dimer was replaced by tertiary‐butyl methacrylate (tBuMA). In particular, an amphiphilic linear DMAEMA–tBuMA diblock copolymer and a tBuMA arm‐first star homopolymer were also synthesized. All polymers were characterized in terms of their molecular weights and composition using gel permeation chromatography and ¹H NMR spectroscopy, respectively. Subsequently, the tertiary‐butyl groups of the TBHMA ether dimer units and those of the tBuMA units were cleaved by hydrolysis to yield carboxylic acid groups. The successful removal of the tertiary‐butyl groups was confirmed using ¹H and ¹³C NMR and attenuated total reflectance‐Fourier transform infrared spectroscopies. The hydrolyzed (co)polymers exhibited pK values of the carboxylic acid groups of around 4.5, and glass transition temperatures, T_g, of around 200 °C, which were 50 °C higher than those of their nonhydrolyzed precursors. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis,Structural Characterization,and Electrochemical Properties of Isotruxene–Polyaniline Hybrid Systems

The synthesis, structural characterization, and electrochemical properties of a series of isotruxene–polyaniline (PANI ) hybrid systems (SITPs , SITAs , and CITs ) are reported. The syntheses were performed by in situ chemical oxidative polymerization of aniline in the presence of isotruxene additives ITP and/or ITA at specific aniline‐to‐additive molar ratios. The polymers SITPs and SITAs display granular morphology, but for the polymers CITs a spherical morphology with a diameter of 300–500 nm is found. These hybrid systems display electrochemical capacitive performance superior to those of the parent PANI prepared under the same condition (e.g., 385–463 vs. 181 F/g at 3 mA /cm² current density during charge–discharge test). Molecular (star‐shaped or hyperbranched vs. linear topology) and supramolecular (isotruxene–PANI π–π and cation–π interactions) models in accounting for the observed morphology and electrochemical properties are provided.     

Ring‐Opening and polymerization of 1‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotrisiloxane

1‐[2′‐(Heptaphenylcyclotetrasiloxanyl)ethyl]‐1,3,3,5,5‐pentamethylcyclotetrasiloxane ( II ) was prepared from 1‐[2′‐(methyldichlorosilyl)ethyl]‐1,3,3,5,5,7,7‐heptaphenylcyclotetrasiloxane ( I ) and tetramethyldisiloxane‐1,3‐diol. Acid‐catalyzed ring‐opening of II in the presence of tetramethyldisiloxane gave 1,9‐dihydrido‐5‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( III ) and 1,9‐dihydrido‐3‐[2′‐(heptaphenylcyclotetrasiloxanyl)ethyl]nonamethylpentasiloxane ( IV ). Both acid‐ and base‐catalyzed ring‐opening polymerization of II gives highly viscous, transparent polymers. The structures of I – IV and polymers were determined by UV, IR, ¹H, ¹³C, and ²⁹Si NMR spectroscopy. In addition, molecular weights obtained by GPC and NMR end group analysis were confirmed with mass spectrometry. On the basis of ²⁹Si NMR spectroscopy, the polymers appear to result exclusively from ring‐opening of the cyclotrisiloxane ring. No evidence for ring‐opening of the cyclotetrasiloxane ring was observed. Polymer properties were determined by DSC and TGA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 137–146, 2006     

Synthesis,characterization, thermal properties,and antimicrobial activity of 4‐chloro‐3‐methyl phenyl methacrylate/8‐quinolinyl methacrylate copolymers

4‐Chloro‐3‐methyl phenyl methacrylate (CMPM) and 8‐quinolinyl methacrylate (8‐QMA) were synthesized through the reaction of 4‐chloro‐3‐methyl phenol and 8‐hydroxy quinoline, respectively, with methacryloyl chloride. The homopolymers and copolymers were prepared by free‐radical polymerization with azobisisobutyronitrile as the initiator at 70 °C. Copolymers of CMPM and 8‐QMA of different compositions were prepared. The monomers were characterized with IR spectroscopy and ¹H NMR techniques. The copolymers were characterized with IR spectroscopy. UV spectroscopy was used to obtain the compositions of the copolymers. The monomer reactivity ratios were calculated with the Fineman–Ross method. The molecular weights and polydispersity values of the copolymers were determined with gel permeation chromatography. The thermal stability of the polymers was evaluated with thermogravimetric analysis under a nitrogen atmosphere. The homopolymers and copolymers were tested for their antimicrobial activity againstbacteria, fungi, and yeast. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 157–167, 2005     

Novel anhydrous proton conducting copolymers of 1‐vinyl‐1,2,4‐triazole and diisopropyl‐p‐vinylbenzyl phosphonate

Phosphonic acid functional polymers are currently of interest because of their high proton conductivity in humidified and anhydrous systems. In addition, heterocyclic compounds are used in anhydrous proton conducting polymer membranes. In that study, a new copolymer based on 1‐vinyl‐1,2,4‐triazole (VTri) and diisopropyl‐p‐vinylbenzyl phosphonate (VBP) was synthesized, and their thermal, chemical, and proton conducting properties were investigated. The copolymers were synthesized by free radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain P(VTri‐co‐VBP) copolymers. The copolymer samples were then hydrolyzed to produce poly(vinyl triazole‐co‐vinyl phosphonic acid) copolymers. The composition of the copolymers was determined by elemental analysis. The copolymerization and hydrolysis reactions were verified by Fourier transform infrared spectroscopy and ion exchange capacity measurements. Thermogravimetry analysis indicates that the copolymers are thermally stable up to 300°C. In order to increase the proton conductivity, the copolymers were doped with H₃PO₄ at several stoichometric ratios. The proton conductivity increases with triazole and phosphoric acid content. In the absence of humidity, the copolymer electrolyte, P(VTri‐co‐VBPA)1:0.5 X = 2, showed a proton conductivity of 0.005 S/cm at 150°C. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel approach for preparation of conductive hybrid elastomeric nano‐composites

Since the discovery of carbon nanotubes (CNTs) and intrinsically conductive polymers, such as polyaniline (PANI) some research has focused on the development of novel hybrid materials by combining CNT and PANI to achieve their complementary properties. Electrically conductive elastomer nano‐composites containing CNT and PANI are described in the present investigation. The synthesis procedure includes in‐situ inverse emulsion polymerization of aniline doped with dodecylbenzene sulfonic acid in the presence of CNT and dissolved styrene‐isoprene‐styrene (SIS) block copolymer, followed by a precipitation–filtration step. The synthesis step is carried out under ultrasonication. The resulting uniform SIS/CNT/PANI dispersions are stable for long time durations. The incorporation of CNT/PANI in the SIS elastomeric matrix improves thermal, mechanical and electrical properties of the nano‐composites. The formation of continuous three‐dimensional CNT/PANI network, assumed to be responsible for enhancement of the resulting nano‐composite properties, is observed by HRSEM. A relatively low percolation threshold of 0.4 wt.% CNT was determined. The Young's modulus of the SIS/CNT/PANI significantly increases in the presence of CNT. High electrical conductivity levels were obtained in the ternary component systems. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Novel Methacrylic Copolymers: Determination of Monomer Reactivity Ratios

A new methacrylic monomer, 4‐nitro‐3‐methylphenyl methacrylate (NMPM) was prepared by reacting 4‐nitro‐3‐methyl phenol dissolved in methyl ethyl ketone (MEK) in the presence of triethylamine as a catalyst. Copolymerization of NMPM with methyl methacrylate (MMA) has been carried out in methyl ethyl ketone (MEK) by free radical solution polymerization at 70±1°C utilizing benzoyl peroxide (BPO) as initiator. Poly (NMPM‐co‐MMA) copolymers were characterized by FT‐IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weights (M_w and M_n) and polydispersity indices (M_w/M_n) of the polymers were determined using a gel permeation chromatograph. The glass transition temperatures (T_g) of the copolymers were determined by a differential scanning calorimeter, showing that T_g increases with MMA content in the copolymer. Thermogravimetric analysis of the polymers, performed under nitrogen, shows that the stability of the copolymer increases with an increase in NMPM content. The solubility of the polymers was tested in various polar and non‐polar solvents. Copolymer compositions were determined by ¹H‐NMR spectroscopy by comparing the integral peak heights of well separated aromatic and aliphatic proton peaks. The monomer reactivity ratios were determined by the Fineman‐Ross (r₁ =7.090:r₂=0.854), Kelen‐Tudos (r₁=7.693: r₂=0.852) and extended Kelen‐Tudos methods (r₁=7.550: r₂= 0.856).     

Preparation and characterization of PVC/PANI conductive composite with extremely low percolation threshold

Aniline was polymerized in the presence of poly(vinyl chloride) (PVC) powders in hydrochloric acid to in situ prepare poly(vinyl chloride)/polyaniline (PVC/PANI) composite particles. UV‐vis spectra and FT‐IR spectra indicate PANI in PVC/PANI composite particles possessed a higher oxidation state with decreased aniline content in reactants. Both conductivity and impact strength of the dodecylbenzenesulfonic acid (DBSA) doped PANI composites (PVC/PANI‐DBSA), which were compression molded from the in situ prepared PVC/PANI particles, increase with the pressing temperature and decrease with the increase of DBSA doped PANI (PANI‐DBSA) loading. An excellent electric conductivity of 5.06 × 10^?2 S/cm and impact strength of 0.518 KJ/m² could be achieved for the in situ synthesized and subsequently compression molded composite. Copyright © 2004 John Wiley & Sons, Ltd.