具有阳离子表面活性ATRP引发剂的合成

以2-溴异丁酰溴、2-溴乙醇、6-氯-1-己醇及N,N-二甲基正十二烷基胺为主要原料,分别通过两步或三步反应合成了具有阳离子表面活性的原子转移自由基聚合(ATRP)引发剂——N-[2-(2-溴-2-甲基丙酰氧基)乙基]-N,N-二甲基正十二烷基溴化铵或N-[6-(2-溴-2-甲基丙酰氧基)己基]-N,N-二甲基正十二烷基碘化铵,其结构经1H NMR,13C NMR,IR和元素分析表征。     

具有表面活性ATRP引发剂的合成及其在无皂乳液聚合中的应用

以2-溴异丁酰溴、1,2-乙二醇、1,6-己二醇、顺丁烯二酸酐为主要原料,通过三步反应合成了具有阴离子表面活性的原子转移自由基聚合(ATRP)引发剂——4-[2-(2-溴-2-甲基丙酰氧基)乙氧基]-4-氧代-2-磺酸基丁酸二钠(1a)和4-[6-(2-溴-2-甲基丙酰氧基)己氧基]-4-氧代-2-磺酸基丁酸二钠(1b),其结构经1HNMR,IR和元素分析表征。用1引发无皂乳液聚合,研究结果表明反应是活性自由基乳液聚合,所得乳液非常稳定。     

含不同氮杂环双季铵盐的合成及缓蚀性能测定

利用季铵化反应,以1,6二溴己烷分别与吡啶、α-甲基吡啶和喹啉反应制备并表征了三种含不同氮杂环的双季铵盐:溴化1,6-二吡啶己烷(BPHD)、溴化1,6-二(α-甲基吡啶)己烷(BMHD)和溴化1,6-二喹啉己烷(BQHD)。采用电化学测试、静态失重实验等方法,研究了三种双季铵盐在15%盐酸溶液中对N80钢的缓蚀效果。失重实验表明三种双季铵盐在测试体系中均能起到明显的防腐蚀作用。其中BQHD的效果最佳,浓度为1.3×10~(-2)mol·L~(-1)时,在15%HCl、25℃下对N80钢的缓蚀率达92.7%。电化学测试表明,三种化合物都为混合型缓蚀剂,且在N80钢表面的吸附符合Langmuir吸附模型。     

三臂ATRP引发剂的合成及应用

分别以三乙醇胺、三聚氰胺为原料,通过酰化反应合成了三种具有配体功能的三臂原子转移自由基聚合(ATRP)引发剂:三[2-(2-溴异丁酰氧基)乙基]胺,三[2-(4-氯甲基苯甲酰氧基)乙基]胺和2,4,6-三(2-溴异丁酰胺基)-1,3,5-三嗪,收率分别为81%,69%和83%。以三[2-(2-溴异丁酰氧基)乙基]胺既作引发剂又作配体进行甲基丙烯酸甲酯(MMA)的ATRP乳液聚合,结果表明反应前期与中期具有活性/可控特征。     

BPB-Ni(II)-Ala复合物法不对称合成双-α-甲基氨基酸

以2-N-(N’-苄基脯氨酰)-氨基二苯甲酮-镍(II)-丙基酸复合物为手性助剂, 与不同碳链长度的二溴烷烃反应制备 双-α-甲基氨基酸. 其中, BPB-Ni(II)-Ala复合物与1,3-二溴丙烷发生取代-消除反应后生成烯丙基取代复合物中间体, 产率高达90%, 水解生成2-甲基-2-氨基-4-烯-戊酸; 与1,4-二溴丁烷、1,5-二溴戊烷、1,6-二溴己烷可以实现双取代反应, 但所得的主要产物为单取代的BPB-Ni(II)-Ala复合物, 双-α-甲基氨基酸复合物中间体收率分别为38%, 36%, 45%, 经过水解后生成相应的双-α-甲基氨基酸, 分别为2,7-二氨基-2,7-二甲基辛二酸、2,8-二氨基-2,8-二甲基壬二酸、2,9-二氨基-2,9-二甲基癸二酸. 手性助剂2-N-(N’-苄基脯氨酰)-氨基二苯甲酮的回收率可高达95%.     

一种三聚季铵盐表面活性剂的合成

以N,N′-二甲基十八烷胺和1,6-二溴己烷为原料制得单头季铵盐(1);以1-溴十八烷和N,N,N′,N′-四甲基-1,6-己二氨己烷为原料制得单头季铵盐(2); 1和2反应合成了一种三聚季铵盐表面活性剂(3),其结构经1H NMR和IR确证。采用电导法和吊环法研究了3的表面性能。结果表明：25 ℃下,3的cmc为0.01 mmol·L^-1; γ_cmc为14.904 mN·m^-1; C₂₀为0.003 mmol·L^-1。     

BPB-Ni(Ⅱ)-Ala复合物法不对称合成双-α-甲基氨基酸

以2-N-(N'-苄基脯氨酰)-氨基二苯甲酮-镍(Ⅱ)-丙基酸复合物为手性助剂,与不同碳链长度的二溴烷烃反应制备双-α-甲基氨基酸.其中,BPB-Ni(Ⅱ)-Ala复合物与1,3-二溴丙烷发生取代-消除反应后生成烯丙基取代复合物中间体,产率高达90%,水解生成2-甲基-2-氨基-4-烯-戊酸;与1,4-二溴丁烷、1,5-二溴戊烷、1,6-二溴己烷可以实现双取代反应,但所得的主要产物为单取代的BPB-Ni(Ⅱ)-Ala复合物,双-α-甲基氨基酸复合物中间体收率分别为38%,36%,45%,经过水解后生成相应的双-α-甲基氨基酸,分别为2,7-二氨基-2,7-二甲基辛二酸、2,8-二氨基-2,8-二甲基壬二酸、2,9-二氨基-2,9-二甲基癸二酸.手性助剂2-N-(N'-苄基脯氨酰)-氨基二苯甲酮的回收率可高达95%.     

自由基反應的研究——Grignard試劑與2-溴代-2,3-二甲基丁烷及與1-氯代-1-甲基環己烷在二鹵化鈷存在時的反應

由2-溴代-2,3-二甲基丁烷与溴化苯基鎂在二溴化鈷存在時所起的反應得到如下產物:2,3-二甲基丁烷(35％),2,3-二甲基丁烯-1(31％)及2,3-二甲基丁烯-2(約2％)。由1-氯代-1-甲基環己烷同溴化甲基鎂或溴化異丙基鎂在二溴化鈷存在時的反應得到甲基環己烷,1-甲基環己烯及次甲基環己烷的混合物。此外,還得到少量的高沸點產物,大概为一雙聚合物。在不飽和的單體中,有相當一部分为次甲基環己烷。用鹼處理2-溴代-2,3-二甲基丁烷所得到的烯烴中合有79％的2,3-二甲基丁烯-2和21％的2,3-二甲基丁烯-1。1-氯代-1-甲基環己烷與鹼起消除作用時則只生成1-甲基環己烯。自由烷基在液相中的歧化作用可能为一雙分子反應,烷基分子中的α-碳原子土所具有的氫原子的數目對於烧烴形成的定向表現一定的影響。     

原子转移自由基聚合制备新型接枝聚α-D-吡喃半乳糖苷色谱固定相及其性能

以2-溴异丁酰溴为引发剂,CuCl/CuC12/Me6TREN为催化体系,在室温条件下采用原子转移自由基聚合(ATRP)法将单体6-O-甲基丙烯酰基-1,2,3,4-双-O-亚异丙基-α-D-吡喃半乳糖苷(6-O-methacryloyl-1,2,3,4-di-O-isopropylidene-α-D-galactop...     

用ATRP法构筑核壳型梯度极性的多羟基多臂星状超支化聚合物及聚合物刷——双层聚合物刷的合成与表征

设计并通过原子转移自由基聚合方法 (ATRP)合成了核壳型多羟基多臂星状超支化聚合物刷 .以 2 溴异丁基酰溴封端的超支化聚 (3 乙基 3 羟甲基氧杂环丁烷 ) (HP Br)作为大分子引发剂 ,采用Cu(I)Br和N ,N ,N′ ,N′ ,N″ 五甲基二乙基三胺 (PMDETA)催化体系 ,在丁酮与丙醇的混和溶液中 ,通过甲基丙烯酸羟乙酯(HEMA)的ATRP溶液聚合 ,得到了一系列含有大量羟基的多臂星状超支化聚合物刷 (HP g PHEMA) ,并考察了其羟基的活性 ,发现羟基还可以与苯甲酰氯发生反应 .产物的结构和热性能用1 H NMR、FTIR、GPC、TGA、DSC等进行了表征和测试 .     

A novel strategy to assemble achiral ligands to chiral helical polyrotaxane structures

Using the achiral N,N'-bis(2-pyridylmethyl)-1,6-hexanediamine ligand bearing two end pyridyl groups as the source of conformational chirality, a novel type of TMeQ[6]-based helical polyrotaxane was prepared and characterized by X-ray crystallography and (1)H NMR spectroscopy. The chirality of the polyrotaxane was generated from twisting of the hexylidene of the N,N'-bis(2-pyridylmethyl)-1,6-hexanediamine "string" when bound within the hydrophobic cavity of TMeQ[6]. Two opposite chiral helical polyrotaxanes crystallize as a racemic compound.     

Prediction and Experimental Characterization of the Molecular Architecture of FRP and ATRP Synthesized Polyacrylate Networks

Summary: This work reports experimental and modeling studies concerning the conventional (FRP) and atom transfer radical polymerization (ATRP) of acrylate/diacrylate monomers. In the framework of a recently developed general approach, kinetic models including crosslinking reactions and branching by chain transfer to polymer are discussed for FRP and ATRP polymerization systems. Besides molecular weight distribution (MWD), fairly good predictions of the z-average radius of gyration could be obtained for these non-linear polymers. A set of experiments was performed at 1 L scale in a batch reactor using n-butyl acrylate (BA) or methyl acrylate (MA) as monovinyl monomers and 1,6-Hexanediol diacrylate (HDDA) or bisphenol A ethoxylate diacrylate (BEDA) as crosslinkers. In FRP experiments, AIBN was used as initiator and ATRP polymerizations were initiated by ethyl 2-bromopropionate (EBrP) and mediated by CuBr using PMDETA (N,N,N′,N″,N″-pentamethyldiethylenetriamine) as ligant. Polymerizations were carried out in solution at 60 °C with different dilutions using toluene and DMF as solvents. Products formed at different polymerization times were analyzed by SEC/RI/MALLS yielding average MW, MWD, z-average radius of gyration and monomer conversion. Important differences in the molecular architecture of the synthesized FRP and ATRP highly branched polyacrylates have been identified. Comparisons of experimental results with predictions have put into evidence the important effect of intramolecular cyclizations at all dilutions, even with ATRP polymerizations.     

A facile and novel synthesis of 1,6-naphthyridin-2(1H)-ones

A new and convenient procedure for the synthesis of 1,6-naphthyridin-2(1H)-ones and their derivatives is described. In the first scheme 5-acetyl-6-[2-(dimethylamino)ethenyl]-1,2-dihydro-2-oxo-3-pyridinecarbonitrile ( 4 ) obtained by the reaction of N,N-dimethylformamide dimethyl acetal with 5-acetyl-1,2-dihydro-6-methyl-2-oxo-3-pyridinecarbonitrile ( 3 ) was cyclized to 1,2-dihydro-5-methyl-2-oxo-1,6-naphthyridine-3-carbonitrile ( 5 ) by the action of ammonium acetate. Thermal decarboxylation of acid 7 obtained from the hydrolysis of nitrile 5 led to a mixture of 5-methyl-1,6-naphthyridin-2(1H)-one ( 8 ) and its dimer 9 . Hydrazide 11 obtained from nitrile 5 in two steps was converted to 3-amino-5-methyl-1,6-naphthyridin-2(1H)-one ( 12 ) by the Curtius rearrangement. The amino group of 12 was readily replaced by treatment with aqueous sodium hydroxide to yield 3-hydroxy-5-methyl-1,6-naphthyridin-2(1H)-one ( 13 ). In the second scheme, Michael reaction of enamines of type 20 with methyl propiolate, followed by ring closure gave 5-acyl(aroyl)-6-methyl-2(1H)-pyridinones ( 21 ) which in turn were treated with Bredereck's reagent to produce 5-acyl(aroyl)-6-[2-(dimethylamino)ethenyl]-2(1H)-pyridinones ( 22 ). Treatment of 22 with ammonium acetate led to the formation of 1,6-naphthyridin-2(1H)-ones 23 .     

Dinuclear copper(II) complexes with {Cu2(mu-hydroxo)bis(mu-carboxylato)}+ cores and their reactions with sugar phosphate esters: A substrate binding model of fructose-1,6-bisphosphatase

Reactions of CuX2.nH2O with the biscarboxylate ligand XDK (H2XDK = m-xylenediamine bis(Kemp's triacid imide)) in the presence of N-donor auxiliary ligands yielded a series of dicopper(II) complexes, [Cu2(mu-OH)(XDK)(L)2]X (L = N,N,N',N'-tetramethylethylenediamine (tetmen), X = NO3 (1a), Cl (1b); L = N,N,N'-trimethylethylenediamine (tmen), X = NO3 (2a), Cl (2b); L =2,2'-bipyridine (bpy), X = NO3 (3); L = 1,10-phenanthroline (phen), X = NO3 (4); L = 4,4'-dimethyl-2,2'-bipyridine (Me2bpy), X = NO3 (5); L = 4-methyl-1,10-phenanthroline (Mephen), X = NO3 (6)). Complexes 1-6 were characterized by X-ray crystallography (Cu...Cu = 3.1624(6)-3.2910(4) A), and the electrochemical and magnetic properties were also examined. Complexes 3 and 4 readily reacted with diphenyl phosphoric acid (HDPP) or bis(4-nitrophenyl) phosphoric acid (HBNPP) to give [Cu2(mu-phosphate)(XDK)(L)2]NO3 (L = bpy, phosphate = DPP (11); L = phen, phosphate = DPP (12), BNPP (13)), where the phsophate diester bridges the two copper ions in a mu-1,3-O,O' bidentate fashion (Cu...Cu = 4.268(3)-4.315(1) A). Complexes 4 and 6 with phen and Mephen have proven to be good precursors to accommodate a series of sugar monophosphate esters (Sugar-P) onto the biscarboxylate-bridged dicopper centers, yielding [Cu2(mu-Sugar-P)(XDK)(L)2] (Sugar-P = alpha-D-Glc-1-P (23a and b), D-Glc-6-P (24a and b), D-Man-6-P (25a), D-Fru-6-P (26a and b); L = phen (a), Mephen (b)) and [Cu2(mu-Gly-n-P)(XDK)(Mephen)2] (Gly-n-P = glycerol n-phosphate; n = 2 (21), 3 (22)), where Glc, Man, and Fru are glucose, mannose, and fructose, respectively. The structure of [Cu2(mu-MNPP)(XDK)(phen)2(CH3OH)] (20) was characterized as a reference compound (H2MNPP = 4-nitrophenyl phosphoric acid). Complexes 4 and 6 also reacted with d-fructose 1,6-bisphosphate (D-Fru-1,6-P2) to afford the tetranuclear copper(II) complexes formulated as [Cu4(mu-D-Fru-1,6-P2)(XDK)2(L)4] (L = phen (27a), Mephen (27b)). The detailed structure of 27a was determined by X-ray crystallography to involve two different tetranuclear complexes with alpha- and beta-anomers of D-Fru-1,6-P2, [Cu4(mu-alpha-D-Fru-1,6-P2)(XDK)2(phen)4] and [Cu4(mu-beta-D-Fru-1,6-P2)(XDK)2(phen)4], in which the D-Fru-1,6-P2 tetravalent anion bridges the two [Cu2(XDK)(phen)2]2+ units through the C1 and C6 phosphate groups in a mu-1,3-O,O' bidentate fashion (Cu...Cu = 4.042(2)-4.100(2) A). Notably, the structure with alpha-D-Fru-1,6-P2 demonstrated the presence of a strong hydrogen bond between the C2 hydroxyl group and the C1 phosphate oxygen atom, which may support the previously proposed catalytic mechanism in the active site of fructose-1,6-bisphosphatase.     

Regioselective synthesis of pyrimido[1,2-a][1,3,5]triazin-6-ones via reaction of 1-(6-oxo-1,6-dihydropyrimidin-2-yl)guanidines with triethylorthoacetate: observation of an unexpected rearrangement

A novel thermal rearrangement, involving pyrimidine ring opening and subsequent ring closure leading to recyclization of the system, was identified in the reaction of (6-oxo-1,6-dihydropyrimidin-2-yl)guanidines 3 (where NR(1)R(2) = NH(2), NH alkyl, NH aralkyl, NHCH(2)Ph(R)) with triethyl orthoacetate, affording 4-substituted-2-methyl-6H-pyrimido[1,2-a][1,3,5]triazin-6-ones 6 and their ring opened products. However, no such rearrangement was observed with (6-oxo-1,6-dihydropyrimidin-2-yl)guanidines 3 bearing a tertiary amino or anilino substituent (i.e. where NR(1)R(2) = N(CH(3))(2), indoline, morpholino, NHAr). As expected, 2-substituted-4-methyl-6H-pyrimido[1,2-a][1,3,5]triazin-6-ones 4 were obtained as the final products. Experimental structural determination and theoretical studies were carried out to get an understanding of the observed thermal rearrangement. In addition, an attempt to obtain similar pyrimido[1,2-a][1,3,5]triazin-6-ones using N,N-dimethylacetamide dimethyl acetal (DMA-DMA) as one carbon inserting synthon had furnished triazine ring annulated product 14 bearing N,N-dimethyl enamino substituent at position 4 as a result of further reaction with a second molecule of DMA-DMA.     

分化诱导剂的合成及晶体结构

合成出四个分化诱导剂,N,N,N',N'-四乙酰已二胺(Ⅰ),1,6-二烟酰已二胺(Ⅱ),1,6-二(3,5-二氧哌嗪)已烷(Ⅲ)和1,6-二[3,3'-(5,5-二甲乙内酰脲)]已烷(Ⅳ),对合成方法和路线进行了优化,通过元素分析、质谱、核磁和红外进行了表征,测定了化合物Ⅲ对人白血病细胞的分化诱导活性,利用单晶X射线四圆衍射测定了化合物Ⅳ的晶体结构,并与化合物Ⅰ,Ⅱ,Ⅲ的晶体结构进行了比较。     

Synthesen,chemische und elektrische Eigenschaften von Tetrathiafulvalen mit 1,6-Methano[10]annulen-Partialstruktur und von Chalcogendiimid-derivaten

Syntheses, Chemical and Electrical Properties of Tetrathiafulvalene with a 1,6-Methano[10]annulene Moiety and of Chalcogendiimide-Derivatives The synthesis of the tetrathiafulvalene 6 has been described: the reaction of 1 with the benzenedithoil 2 yielded the bis-dithioacetal 3 of 1,6-methano[10]annulene-dicarbaldehyde 1 . The oxidation of 3 in the presence of HBF₄ in Et₂O yielded the salt 4 , elimination of a hydride anion with triphenylmethylium tetrafluoroborate the salt 5 , and elimination of a proton in 5 with Et₃N the tetrathiafulvalene 6 with a 1,6-methano[10]annulene moiety. The spectroscopic and electrochemical properties of 6 are described, and also the syntheses and properties of charge-trasnfer complexes 7 and 8 , including the properties of electric conductivity of 7 and 8 . the syntheses of 9-13 are reported and also their spectroscopic properties.     

Kinetic and thermodynamic inclusion complexes of symmetric teramethyl-substituted cucurbit[6]uril with HCl salts of N,N′-bis(pyridylmethyl)-1,6-hexanediamine

The host–guest interaction of symmetrical α,α′,δ,δ′-tetramethyl-cucurbit[6]uril (TMeQ[6]) with the hydrochloride salts of N,N′-bis(4-pyridylmethyl)-1,6-hexanediamine (P6), N,N′-bis(3-pyridyl-methyl)-1,6-hexanediamine (M6) and N,N′-bis(2-pyridylmethyl)-1,6-hexanediamine (O6) was investigated via single crystal X-ray diffraction, ¹H NMR spectroscopy, electronic absorption spectroscopy and fluorescence spectroscopy. Single crystal X-ray diffraction showed that the hexyl moiety of P6 or M6 was incorporated in the cavity of TMeQ[6], while the two pyridylmethyl moieties of O6 were incorporated in the TMeQ[6] cavity in the solid state. The ¹H NMR results in aqueous solution revealed that the TMeQ[6]-P6 and TMeQ[6]-M6 host–guest interaction systems produce a kinetic dumbbell-shaped inclusion complex at the initial stage and then an equilibrium pseudorotaxane-shaped inclusion complex as the only product after heating. However, only the pseudorotaxane-shaped inclusion complex was observed for the TMeQ[6]-O6 host–guest interaction system. Aqueous absorption spectrophotometric analysis showed that the dumbbell-shaped inclusion complexes were stable at pH 5.6, had a host–guest ratio of 2:1 and formed quantitatively at ～10¹¹ l²/mol² for the TMeQ[6]-M6 and TMeQ[6]-O6 systems. The transformation from dumbbell to pseudorotaxane-shaped inclusion complexes for the TMeQ[6]-P6 and TMeQ[6]-M6 host–guest systems yielded activation energies of 59.35 ± 1.55 and 78.7 ± 3.45 kJ/mol, respectively. The pseudorotaxane-shaped inclusion complexes were stable at pH 5.6, had a host–guest ratio of 1:1 and formed quantitatively at ～10⁷ l/mol for the TMeQ[6]-M6 and TMeQ[6]-P6 systems.     

An efficient synthesis of 1-oxo-1,2-dihydrobenzo[b][1,6]naphthyridine-4-carbonitriles

Ethyl α-(dimethylaminomethylene)-2-cyanomethyl-4-phenylquinoline-3-carboxylate(2) as new synthons directed to 1-oxo-1,2-dihydrobenzo[b][1,6]naphthyridine-4-carbonitriles was obtained by the condensation of ethyl 2-cyanomethyl-4-phenylquinoline-3-carboxylate(1) and N,N-dimethylformamide dimethyl acetal(DMFDMA).Reaction of this enamine with primary amines(3) in HOAc-DMF at120 ℃then affords 2-substituted 1-oxo-1,2-dihydrobenzo[b][1,6]naphthyridine-4-carbonitrile derivatives(4) in good yields by a tandem addition-elimination-cyclization reaction.