Evaluation of analytical instrumentation. Part XIX CHNS elemental analysers

The reports of this series tabulate a number of features of analytical instruments that should be considered when making comparison between various systems. Scoring these features in a rational manner allows a scientific comparison to be made between instruments as an aid to selection. This is the XIXth report of the series and deals with CHNS elemental analysers.     

Evaluation of analytical instrumentation. Part XX Instrumentation for energy dispersive X-ray fluorescence spectrometry

The reports of this series tabulate a number of features of analytical instruments that should be considered when making comparison between various systems. Scoring these features in a rational manner allows a scientific comparison to be made between instruments as an aid to selection. This is the XXth report of the series and deals with instrumentation for energy dispersive X-ray fluorescence spectrometry.     

Evaluation of analytical instrumentation. Part XXIII. Instrumentation for portable X-ray fluorescence spectrometry

The reports of this series tabulate a number of features of analytical instruments that should be considered when making comparison between various systems. Scoring these features in a rational manner allows a scientific comparison to be made between instruments as an aid to selection. This is the XXIII report of the series and deals with instrumentation for portable X-ray fluorescence spectrometry. The Analytical Methods Committee has received and approved the following report from the Instrumental Criteria Sub-Committee.     

Static SIMS studies of the oxides and hydroxides of aluminium

The degree of hydroxylation or hydration of aluminium surfaces has been examined by static secondary ion mass spectroscopy (SSIMS). The SSIMS spectra of a series of aluminium oxide, oxyhydroxide and hydroxide surfaces have been obtained using instruments in three configurations. Similarities were observed in both negative and positive secondary ions spectra. Even though a direct comparison of the relative intensities cannot be made from one instrument to the other, a similar ranking of the various aluminium hydroxylation states was observed. Several ranking methods are discussed, as well as the similarities and differences observed while using the three instruments. Similar secondary ions were detected whatever the degree of hydroxylation of the aluminium oxide. This argues in favour of the formation of fragments by the combination of individually sputtered atoms or clusters to form the more stable secondaries, rather than the kick-off of 'structure-related' clusters originating directly from the upper surface layer.     

A comparison of the performance of calorimeters

Isothermal calorimetry is finding extensive application in a number of research areas. This popularity is reflected in the number of commercially available instruments which are capable of yielding a variety of thermodynamic and kinetic parameters. Whilst there has been much discussion of ways in which to validate any values returned from these instruments very little has been done quantitatively to compare the relative performances of different instruments. This paper highlights the use of a test and reference reaction quantitatively to compare the performance of three instruments (Thermometric TAM, THT μRC and a Setaram HSDSC III); the specifications of these instruments provide a range from high-sensitivity, long equilibration time to lower-sensitivity, short equilibration time. The comparison is made through a statistical analysis of values returned for the rate constant, enthalpy of reaction and activation energy for the base catalysed hydrolysis of methyl paraben. The statistical analysis from the data set discussed here indicates that there is no significant difference between the returned thermodynamic and kinetic parameters from the TAM and μRC. The analysis revealed however that the HSDSC returns values for the rate constant which are significantly different from both the TAM and μRC, although it is noted that this instrument was not specifically designed to operate in a step-isothermal mode and that it was possible to apply a correction to the data. In all cases the enthalpy data returned from all instruments were statistically similar although the μRC and HSDSC returned values which were, for the rate constant and activation energy, less precise than those obtained from the TAM. As well as highlighting the importance of using test and reference reactions, this study also shows that proper instrument selection is an important factor when designing a calorimetric experimental series.     

Molecular design based on 3D pharmacophores. Applications to 5-HT7 receptors

A definition of a pharmacophore for the 5-HT7 antagonists was carried out by searching the common chemical features of selective antagonists from the literature. A molecular design is described by analyzing the differences between this new pharmacophore and three other 3D serotonin pharmacophores previously described. This comparison led to the synthesis of a new series of potent 5-HT7 antagonists.     

The development and inter-laboratory verification of LC-MS libraries for organic chemicals of environmental concern

The development, verification, and comparison study between LC-MS libraries for two manufacturers’ instruments and a verified protocol are discussed. Compounds in the libraries are among those considered by the U.S. EPA Office of Water as threats to drinking water including pesticides, drugs of abuse, and pharmaceuticals. The LC-MS library protocol was verified through an inter-laboratory study that involved Federal, State, and private laboratories. The results demonstrated that the libraries are transferable between the same manufacturer's product line, and have applicability between manufacturers. Although ion abundance ratios within mass spectra were shown to be different between the manufacturers’ instruments, the NIST search engine match probability was at 96% or greater for 64 out of 67 compounds evaluated.     

Standardization of Raman spectra for transfer of spectral libraries across different instruments

In this paper we evaluate methods for standardization of Raman spectra that are required to improve spectral correlation computations between spectra measured on different instruments. Five commercially-available 785 nm Raman spectrometers from different vendors were included in the study. These spectrometers have diverse specifications and performance levels and range in size from laboratory-based instruments to field-deployable portable and handheld platforms. Since each Raman spectrometer has different characteristics, spectra obtained on one instrument cannot readily be compared to a library acquired on a different instrument without performing various types of spectral corrections (standardization). We outline a procedure that combines previously established Raman shift and intensity correction protocols with a resolution matching step to facilitate the comparison of a centralized master library with spectra acquired on different geographically distributed Raman spectrometers. The standardization procedure is effective in reducing the inherent instrument-to-instrument variability so that spectra from different spectrometers can be compared and reliable results obtained using library-based spectral correlation methods. The findings have important implications for the ability to transfer Raman spectral libraries between instruments.     

LECO600系列气体分析仪新技术的应用

通过对美国LECO公司400和600系列气体分析仪的研究对比，探讨了600系列仪器新技术的运用和改进。而从中也反映了当代分析仪器发展的总趋势。对气体分析仪器的使用者而言也起了推动深入研究其扩大应用和提高对仪器的维护保养水平的作用。     

Second- and higher-order data generation and calibration: A tutorial

An introduction to multi-way calibration based on second- and higher-order data generation and processing is provided, with emphasis on practical experimental aspects. After a discussion concerning a proper nomenclature scheme, a suitable classification of the obtainable data, and the general features of the available algorithms and their underlying models, a series of examples is discussed in detail, with the purpose of illustrating the great potentiality of the field for the analytical community. Emphasis is directed toward the most popular multi-way data, i.e., second-order or matrix data, which can be conveniently measured in a variety of instruments. Third-order data are being increasingly studied and are also discussed, along with the less explored field of fourth-order data. The estimation of figures of merit, which analysts need to report during method development, is now sufficiently mature to be provided for the general audience.     

The comparison of geometric and electronic properties of molecular surfaces by neural networks: Application to the analysis of corticosteroid-binding globulin activity of steroids

Summary It is shown how a self-organizing neural network such as the one introduced by Kohonen can be used to analyze features of molecular surfaces, such as shape and the molecular electrostatic potential. On the one hand, two-dimensional maps of molecular surface properties can be generated and used for the comparison of a set of molecules. On the other hand, the surface geometry of one molecule can be stored in a network and this network can be used as a template for the analysis of the shape of various other molecules. The application of these techniques to a series of steroids exhibiting a range of binding activities to the corticosteroid-binding globulin receptor allows one to pinpoint the essential features necessary for biological activity.     

The transfer between instruments of a reflectance near-infrared assay for paracetamol in intact tablets

This study compares several correction methods to facilitate the transfer of a validated near-infrared (NIR) assay for paracetamol in intact tablets between two reflectance NIR instruments of the same type. Transfer was defined as the ability to accurately predict the true assay value of a sample measured on a NIR system using an assay developed on a different system, and was assessed using a comprehensive set of statistical tests. Direct electronic transfer of the calibration models, representing the NIR assay, was not possible as a result of a definite residual spectrum between instruments. The use of a correction method based on the standardisation of the material used to record the reference spectrum also proved ineffective. Two methods investigated did succeed, the first employed a response surface calculated between the reflectance values of a set of six certified photometric standards measured on both instruments, with all full range partial least square (PLS) regression models subsequently transferred. The next was correction of the spectra from the second instrument utilising the residual spectrum between the mean sample of the validation set measured on both instruments. Through this approach all PLS regression models and also a single multiple linear regression (MLR) model were transferred. As an outcome of this study guidelines are suggested for the transfer of NIR assays along with the criteria deemed necessary to conclusively prove transfer and justify any correction method utilised. The significant criteria were determined to be the paired t-test with both the UV reference assay data and the original NIR assay data, and comparison of the coefficient of multiple determinations.     

Vibronic spectroscopy of single C60 molecules and monolayers with the STM

A scanning tunneling microscope is used to study the differential conductance (dI/dV) of single C(60) molecules in isolation and in monolayers adsorbed on NiAl(110) and on an ultrathin alumina film grown on the NiAl(110) surface. On the oxide layer, the electronic bands in the dI/dV spectra display a series of equally spaced features, attributed to the vibronic states of the molecules, which are absent when the molecules are adsorbed on the metal. A comparison between the molecular spectra measured on the oxide film reveals the effect of adsorption temperature and geometry, as well as intermolecular interactions on the vibronic features.     

A novel tandem quadrupole mass spectrometer allowing gaseous collisional activation and surface induced dissociation.

A novel tandem quadrupole mass spectrometer is described that enables gaseous collision-induced dissociation (CID) and surface-induced dissociation (SID) experiments. The instrument consists of a commercially available triple quadrupole mass spectrometer connected to an SID region and an additional, orthogonal quadrupole mass analyser. The performance of the instrument was evaluated using leucine-enkephalin, allowing a comparison between CID and SID, and with previous reports of other SID instruments. The reproducibility of SID data was assessed by replicate determinations of the collision energy required for 50% dissociation of leucine-enkephalin; excellent precision was observed (standard deviation of 0.6 eV) though, unexpectedly, the reproducibility of the equivalent figure for CID was superior. Several peptides were analysed using SID in conjunction with liquid secondary-ion mass spectrometry or electrospray; a comparison of the fragmentation of singly protonated peptide ions and the further dissociation of y-type fragments was consistent with the equivalence of the latter fragments to protonated peptides. Few product ions attributable to high-energy cleavages of amino acid side-chains were observed. The SID properties were investigated of a series of peptides differing only in the derivatization of a cysteine residue; similar decomposition efficiencies were observed for all except the cysteic acid analogue, which demonstrated significantly more facile fragmentation.     

A large computer system for on-line data acquistion and analysis of data from analytical instruments

Summary Experience with a unique large dual processor system designed to acquire and analyze data from about 140 instruments in a research installation will be described. The system has been in operation for nearly 4 years serving a variety of analytical instruments including gas chromatographs, liquid chromatographs, tensile testing machines, differential thermal analyzers, and other miscellaneous instruments. The system also serves a large community of scientific time-sharing users, a substantial portion of which reduce data and carry out scientific calculations on data acquired off-line on paper or magnetic tape. Unique features of the system are long distance transmission of analog data, retention of raw data for reanalysis, post processing of data into material balance, kinetic or statistical equations, interactive graphical display of the data acquired on-line and the ability to monitor instrument performance. Another unique features is the ability to develop new analysis programs in time-sharing without fear of jeopardizing the integrity of the data collection process.     

Synthesis of second-generation sansalvamide A derivatives: novel templates as potential antitumor agents

We report the synthesis of 34 second-generation Sansalvamide A derivatives. San A derivatives have unique anticancer properties and target multiple cancers, including colon, pancreatic, breast, prostate, and melanoma. As novel templates, the derivatives described herein explore the role of stereochemistry, amide bond geometry, transannular hydrogen bonding, and polarity on antitumor potency. Testing the chemotherapeutic activity of these derivatives against multiple cancer cell lines will provide clear structural motifs and identify conformational space that is important for cytotoxicity. The 34 compounds presented are divided into six series, where five series involve the insertion of D-amino acids in conjunction with four structural features at each of the five positions of the macrocycle. The sixth series involves comparison between all L- and all D-amino acid derivatives with N-methyls placed at each position around the macrocyclic core. The four structural features explored in conjunction with D-amino acids include N-methyl amino acids, aromatic amino acids, polar amino acids, and hydrophobic alkyl amino acids.     

对某医药-护肤液成分的剖析研究

采用了溶剂抽提与多种仪器相配合的分析方法，对某医药-护肤液的成分进行了剖析．其主要医药成分的富集，以乙醚为最佳，浓缩富集物的纯度可达99％．以高效液相色谱(HPLC)、质谱(MS)、红外光谱(IR)、元素分析等几种仪器分析相互配合完成了样品的定性、定量测定．结果表明，此护肤液的主要医药成分为氯霉素(D(-)threo-2，2-dichloro-N-[β-hydroxy-α-hydroxymethyl)-P-nitrophenethyl)acetamide，chloramphenicol，chloromycetin)．主要美容基质成分为1，2-丙二醇．此外，还有罗红霉素、地塞米松、乙二醇、乙醇等成分．     

Characterization of the interlaboratory reproducibility of results in quantitative gas-chromatographic analysis using the internal normalization method

A comparison of the results of gas-chromatographic analysis performed for the same samples with the use of various instruments with flame-ionization detectors and different (packed and capillary) columns indicates statistically significant differences in the results of data processing by the internal normalization method. Such variations in relative peak areas were detected on the same instrument on a comparison between data obtained under isothermal conditions and with temperature programming. Conceivable reasons for the observed changes in relative peak areas and procedures for the evaluation of errors due to this effect in the analysis of various samples on particular instruments are considered.Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 2, 2005, pp. 137–143.Original Russian Text Copyright © 2005 by Zenkevich, Eshchenko, Klimova.This revised version was published online in April 2005 with corrections to the author names and book review format.     

Towards a universal product ion mass spectral library - reproducibility of product ion spectra across eleven different mass spectrometers

Product ion spectra produced by collision-induced dissociation (CID) in tandem mass spectrometry experiments can differ markedly between instruments. There have been a number of attempts to standardise the production of product ion spectra; however, a consensus on the most appropriate approach to the reproducible production of spectra has yet to be reached. We have previously reported the comparison of product ion spectra on a number of different types of instruments - a triple quadrupole, two ion traps and a Fourier transform ion cyclotron resonance mass spectrometer (Bristow AWT, Webb KS, Lubben AT, Halket JM. Rapid Commun. Mass Spectrom. 2004; 18: 1). The study showed that a high degree of reproducibility was achievable. The goal of this study was to improve the comparability and reproducibility of CID product ion mass spectra produced in different laboratories and using different instruments. This was carried out experimentally by defining a spectral calibration point on each mass spectrometer for product ion formation. The long-term goal is the development of a universal (instrument independent) product ion mass spectral library for the identification of unknowns.The spectra of 48 compounds have been recorded on eleven mass spectrometers: six ion traps, two triple quadrupoles, a hybrid triple quadrupole, and two quadrupole time-of-flight instruments. Initially, 4371 spectral comparisons were carried out using the data from eleven instruments and the degree of reproducibility was evaluated. A blind trial has also been carried out to assess the reproducibility of spectra obtained during LC/MS/MS.The results suggest a degree of reproducibility across all instrument types using the tuning point technique. The reproducibility of the product ion spectra is increased when comparing the tandem in time type instruments and the tandem in space instruments as two separate groups. This may allow the production of a more limited, yet useful, screening library for LC/MS/MS identification using instruments of the same type from different manufacturers.     

Interlaboratory comparison of limits of detectic in negative chemical ionization mass spectrometry

Data are presented on the limits of detection for a series of nine compounds in negative chemical ionization (NCI) mass spectra obtained in five different mass spectrometers: Finnigan 4000 with a 4500 ion source, Kratos MS-80, Hewlett-Packard 5985 and two Finnigan 4500s. The nine compounds undergo either resonance capture or dissociative capture of an electron at optimum energies ranging from 0.0 to 1.1 eV. The limits of detection generally increased with increasing optimum electron energy. The limit of detection as a function of optimum electron capture energy is expected to provide information about the electron energy distribution in the ion sources. The data showed scatter within and between instruments. The scatter is believed to be due primarily to reactions with low levels of adventitious gases such as oxygen in the ion source. The data also suggested wide variations in electron energies between the instruments. The variation in the electron energy distribution is thought to have been caused by variations in the ion optical fields within the instruments. These results suggest that the requirements for reproducibility in NCI mass spectra at the limit of detection are rigorous control of trace gases in the ion source, control of the electric fields within the source including ion optical fields that penetrate the source aperture control of pressure, temperature and other factors that influence NCI mass spectra.