碳助剂对完全液相法制备的 Cu-Zn-Al 催化剂性能的影响

 采用完全液相法制备了 Cu-Zn-Al 催化剂, 研究了碳纳米管和碳微球的加入对该催化剂 CO 加氢合成低碳醇反应性能的影响, 并用 X 射线粉末衍射、氮气吸附、氢气程序升温还原和氨气程序升温脱附-质谱等方法对催化剂进行了表征. 结果表明, 用完全液相法制备的 Cu-Zn-Al 甲醇合成催化剂具有一定的合成低碳醇和低碳烃的能力, 这种能力归结于较大 Cu0 晶粒的产生. 一定量碳微球的加入可大大减小 Cu0 晶粒度, 从而大幅度提高甲醇选择性.     

微球W-Mn/SiO2催化剂的制备及其在固定流化床上的实验研究

采用混浆喷雾干燥法，制备了微球W－Mn/SiO2催化剂，该微球催化剂的粒度分布合理，磨损指数合格，可以满足流化床操作的要求，在固定流化床实验装置上，考察了W－Mn/SiO2微球催化剂的甲烷氧化偶联催化性能，结果表明，在与固定床相似的实验条件。微球催化剂的甲烷转化率相当，但碳二烃选择性较低，有待于进一步提高。     

催化剂对乳液模板法制备碳材料形貌的影响

以液体石蜡为油相,间苯二酚和甲醛的水溶液为水相,吐温80和司班80为乳化剂,获得油/水(O/W)型乳状液.将该乳状液聚合、碳化去除模板后制得了碳材料,研究了不同催化剂对所得碳材料形貌的影响.结果表明:选择NaOH为催化剂时,制得的碳材料是一种具有孔壁和孔洞的多孔碳泡沫,典型样品的孔径约为1-2μm;当氨水为催化剂时,所得碳材料是由微球或者相互缠绕的蠕虫状粒子组成的块体材料,这些微球或粒子的直径主要集中在1-2μm,与NaOH为催化剂时所得碳泡沫的孔径尺寸相当.研究发现,氨水的加入使得乳液体系发生了相转化,由原来的O/W型乳液逐渐转变为W/O型高内相乳液.从分子间氢键出发,应用内聚能理论探讨了催化剂导致的乳液相变以及不同形貌碳材料的形成过程.     

果糖一步水热合成碳微球固体酸催化纤维素水解

纤维素水解是生物质资源转化利用中最关键的一步. 通过硫酸浸渍活性炭方法制备的磺酸基功能化活性炭是目前纤维素水解反应中应用最为广泛的固体酸之一,但这种方法存在严重的环境污染问题. 我们利用果糖的水热碳化,在150 ℃的温和条件下合成了一种新型的富含羧基和羟基的碳微球固体酸,在离子液体1-丁基-3-甲基咪唑氯盐[BMIM][Cl]溶剂体系中,该碳微球可以有效地将纤维素水解（130 ℃,反应3 h,还原糖产率45.6%）. 为了进一步提高碳微球固体酸的活性,以磺基水杨酸为共聚物,利用果糖的水热碳化反应,通过一步水热法合成了含有磺酸基的碳微球固体酸催化剂. 系统研究了该催化剂作用下反应温度、反应时间、催化剂使用量、水的添加量以及纤维素起始浓度等因素对纤维素催化水解的影响. 在[BMIM][Cl]溶剂中,纤维素水解的还原糖产率提高到了60.7% （130 ℃,反应90 min）,且催化剂循环5次后仍能保持良好催化活性. 本工作利用果糖一步水热法制备碳微球固体酸,并将其应用于纤维素的高效水解,为生物质资源的高值化提供了一条新路径.     

聚酰亚胺多孔碳膜的制备及其表征和应用

以乙醇为溶剂,采用溶胶-凝胶法制备了二氧化硅微球.首先由二甲基乙酰胺(DMAc)、4,4—二氨基二苯醚及均苯四甲酸二酐(PMDA)得到聚酰胺酸;再以二氧化硅微球作为模板剂,经亚胺化聚酰胺酸得到聚酰亚胺复合膜;复合膜经浸渍脱模板、高温炭化后得到多孔碳膜.采用扫描电镜观察了多孔碳膜的微结构;同时考察了碳膜的机械稳定性及其对催化剂的担载性能.结果表明,所制备的碳膜具有良好的结构多孔性和机械稳定性;其比表面积为377 m2.g-1,总的孔体积约为0.097 cm3.g-1.与此同时,多孔碳膜对金属Pt催化剂和葡萄糖氧化酶具有良好的吸附作用和担载性能.     

碳球为模板水热合成Mg-Co复合氧化物及其催化分解N_2O（英文）

用自制的碳球为模板剂,尿素为沉淀剂,120℃水热合成尖晶石型Mg-Co复合氧化物(MgCo_2O_4),在其表面浸渍K_2CO_3溶液制得K改性催化剂,用于催化分解N2O。用X射线衍射(XRD)、N2物理吸附-脱附、扫描电镜(SEM)、H2程序升温还原(H2-TPR)、O2程序升温脱附(O2-TPD)、X射线光电子能谱(XPS)等技术对催化剂进行结构表征,考察了钴镁离子/碳球的质量比、尿素/钴镁离子的物质的量比等制备参数对催化剂活性的影响。结果表明,钴镁离子/碳球的质量比为0.192、尿素/钴镁离子的物质的量比为2,制得的MgCo_2O_4催化剂活性较高。K改性MgCo_2O_4催化剂在400℃有氧无水、有氧有水条件下连续反应50 h,N2O转化率分别保持在91%和62%,稳定性较好。     

负载酞菁铁的氮掺杂中空碳球的电催化氧还原性能（英文）

开发低成本、高性能的氧还原反应（ORR）催化剂是当前的研究热点.虽然酞菁铁（FePc）在几十年前就被证明能高效地电催化氧还原反应,但由于其电子传导性和稳定性较差,无法取代商用的Pt/C催化剂.氮掺杂碳材料不仅化学性质稳定、电子传导性好,还有一定的氧还原催化活性.本文首先制备了聚苯乙烯@聚多巴胺球前驱体,经过高温碳化后制得了氮掺杂中空碳球,进而负载酞菁铁后制备了负载酞菁铁的氮掺杂中空碳球复合材料（FePc-NHCS）.通过调整煅烧温度和酞菁铁的负载量,可进一步调控FePc-NHCS的多孔结构、石墨化程度、氮掺杂的种类与含量及酞菁铁的负载状态.优化后的FePc-NHCS在碱性电解质中显示出优异的ORR催化活性,其半波电位和稳定性均高于商用Pt/C催化剂.研究结果表明,掺杂与复合是增强单项催化组分活性的有效途径.此外,通过调控催化剂的结构和组分也能有效地优化催化剂的氧化还原性能.     

碳纳米球/聚乙烯复合物的制备与表征

以碳纳米球为载体,经格氏试剂处理后,与TiCl4反应制成负载型Ziegler-Natta催化剂,在AlEt3存在下,催化乙烯聚合,原位制备聚乙烯(PE)/碳纳米球(CSs)复合物,催化剂活性达5.7×106gPE/(molTi·h),聚乙烯分子量为4.9×105.HRTEM和SEM结果表明,常压聚合条件下聚乙烯/CSs复合物为核-壳结构,颗粒呈圆形,直径约为1μm左右,复合物颗粒中包含碳纳米球.介电分析结果表明,由于碳纳米球的引入,复合物的介电性能相较于普通聚乙烯有明显的提高,从而提高了聚乙烯的抗静电性能,且介电常数和介电损耗都随着聚合时间的延长而降低.此外,采用WAXD,DSC和TGA表征了PE/CSs复合物的结晶性能和热性能,结果表明聚乙烯/CSs复合物具有好的结晶性能和热稳定性能.     

简便方法制备氮掺杂的碳球用作高效非金属氧还原催化剂（英文）

随着人们环保意识的不断增强,社会对清洁能源的需求也日益增加.燃料电池具有效率高,燃料来源丰富,可直接将化学能转化成电能且污染小等优点,因而受到了广泛关注.然而,燃料电池的阴极氧还原反应(ORR)速率较慢,成为提高燃料电池整体效率的制约因素.因此,开发高性能的ORR催化剂,加快ORR反应速率具有非常重要的意义.目前,Pt基催化剂被认为是活性最好的商用ORR电催化剂.尽管此类催化剂具有较高的催化活性和良好的稳定性,但Pt的储量有限,价格高昂,抗燃料毒化性能差,限制了其大规模应用.近年来,为了减小Pt的用量,降低催化剂成本,人们除了致力于研究贵金属合金催化剂及非贵金属催化剂外,还把目光聚焦在了非金属催化剂,特别是碳及其复合材料的研究上.在众多碳材料中,碳球因具有良好的表面渗透性和较高的机械稳定性而被广泛应用于催化、吸附、药物输送和能量存储及转化等领域中.然而,碳球的表面化学惰性较强,比表面积较低,使其部分应用受到了限制.因此,人们采用了多种方法来调控碳球的物理化学性质.其中,向碳材料中掺入杂原子,尤其是氮原子的方法广受青睐.因为杂原子的掺入会显著增强作为主体的碳原子给电子的能力和表面吸附性质,从而对ORR表现出优异的催化活性和稳定性.本文以蔗糖作为碳源,三聚氰胺作为氮源,采用水热法及高温热解法制备了一系列氮掺杂的生物质碳球.并对氮掺杂量及热解温度进行了优化.结果表明,石墨化程度及石墨氮含量的提高,能有效地提高催化剂的活性.在优化了的条件下得到的催化剂N0.1C1.9S-900,表现出了比商业Pt/C催化剂更好的ORR催化性能.在0.1 mol/L KOH中,该催化剂催化ORR的起始电位和半波电位分别为–22.6和–133.6 mV(vs.Ag/AgCl),极限电流密度为4.6 mA/cm~2,分别比商业Pt/C高出7.2 mV,5.9 mV和0.2 mA/cm~2.同时,在经过30000 s的稳定性测试中,N0.1C1.9S-900催化剂的电流损失也远低于Pt/C,表明该催化剂具有良好的稳定性.此外,在抗甲醇毒化实验中,相比于商业Pt/C,N0.1C1.9S-900催化剂对甲醇有更好的耐受性.另外,该催化剂催化的ORR属于高效的4e~–途径.可见,该催化剂作为燃料电池的阴极氧还原反应催化剂具有广阔的前景.     

碳球/钯核壳结构电催化剂的制备和性能研究

分别以葡萄糖、蔗糖、淀粉为碳源,采用水热法制备碳微球;再通过还原法把金属钯负载在碳微球上,制成三种不同的碳球/钯核壳结构电催化剂。采用XRD、SEM、IR对样品的成分、结构和形貌进行分析表征;并将样品制成电极,测试它们的电化学活性。研究结果表明当以淀粉为碳源时,所得碳微球表面羟基官能团丰富,金属钯在该类碳微球上有更好的负载效果,对应的碳球/钯核壳结构电催化剂也表现出更好的电化学活性。对比三类核壳结构电极材料对乙醇和乙二醇的电化学氧化活性表明,三种电极材料对氧化乙二醇有更好的催化活性。     

Y_2O_2S:Eu~(3+)空心微球的制备与性能

以单分散的碳球为硬模板,采用均匀共沉淀法合成了Y_2O_2S:Eu~(3+)心微球.通过XRD、SEM、TEM、荧光光谱对其进行表征.X射线衍射测试表明所制备的Y_2O_2S:Eu~(3+)空心微球为单相,六方晶.扫描电子显微镜(SEM)和透射电子显微镜(TEM)测试表明所制备的Y_2O_2S:Eu~(3+)空心微球粒径小,分布均匀.激发和发射光谱测试表明Eu~(3+)离子能有效地掺入硫氧化钇基质中,并具有良好的发光性能.     

Fabrication of functional hollow carbon spheres with large hollow interior as active colloidal catalysts

In this study,we have established a facile method to synthesize functional hollow carbon spheres with large hollow interior,which can act as active colloidal catalysts.The method includes the following steps:first,hollow polymer spheres with large hollow interior were prepared using sodium oleate as the hollow core generator,and 2,4-dihydroxybenzoic acid and hexamethylene tetramine(HMT) as the polymer precursors under hydrothermal conditions;Fe 3+ or Ag + cations were then introduced into the as-prepared hollow polymer spheres through the carboxyl groups;finally,the hollow polymer spheres can be pseudomorphically converted to hollow carbon spheres during pyrolysis process,meanwhile iron or silver nanoparticles can also be formed in the carbon shell simultaneously.The structures of the obtained functional hollow carbon spheres were characterized by TEM,XRD,and TG.As an example,Ag-doped hollow carbon spheres were used as colloid catalysts which showed high catalytic activity in 4-nitrophenol reduction reaction.     

利用胶体碳球为模板制备SiO2、TiO2、SnO2空心球

介观尺度的氧化物空心球材料在许多领域都有着潜在的应用价值[1],因此近年来受到人们的广泛关注。其制备方法包括:模板法[2],声化学法[3],水热法[4]等。其中胶体粒子模板合成是制备氧化物空心球材料的一条最为有效的途径。常见的胶体粒子有金、银、CdS的纳米粒子,介观尺度的SiO     

Silicalite-1空心球材料制备及其在Beckmann重排反应中催化应用研究

以碳微球作为硬模板、纳米Silicalite-1分子筛作为壳层,采用水热法合成了Silicalite-1空心球材料。采用XRD、SEM、FT-IR、N_2吸附、29Si M AS NM R、TG、XPS等技术对催化剂的物相、形貌和性能等进行表征,发现该空心材料具有较高的结晶度、发达的多级孔道结构和丰富的表面羟基。与传统方法制备的Silicalite-1分子筛催化剂相比,Silicalite-1空心材料在环己酮肟Beckmann重排反应中表现出优异的催化性能,使环己酮肟的转化率达99%、己内酰胺的选择性达94%,同时催化剂保持极佳的稳定性。研究表明,Silicalite-1空心材料中具有的大量巢式硅羟基和末端硅羟基是Beckmann重排反应的主要活性位,且可通过简单焙烧再生实现羟基活性位的完全恢复。     

O/W/O double emulsion-assisted synthesis and catalytic properties of CeO2 hollow microspheres

CeO₂ hollow microspheres have been fabricated through a simple thermal decomposition of precursor approach. The precursor with an average size of 10 μm was prepared in a reverse microemulsions containing Ce(NO₃)₃·6H₂O and CO(NH₂)₂ at 160 °C. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscope (TEM), selected area electron diffraction (SAED) and scanning electron microscopy (SEM). The possible formation mechanism of hollow spheres was discussed. In addition, the CeO₂ hollow microspheres modified glassy carbon electrode exhibit excellent sensing performance towards methyl orange, which provide a new application of CeO₂ hollow spheres. The catalytic activity of CeO₂ hollow spheres on the thermal decomposition of ammonium perchlorate (AP) also was investigated by TGA. The catalytic performance of CeO₂ hollow spheres is superior to that of commercial CeO₂ powder.     

Preparation of nano-CuO-loaded halloysite nanotubes with high catalytic activity for selective oxidation of cyclohexene

A facile preparation method of nano-CuO catalysts, assembled in the hollow nanotube of halloysite nanotubes(HNTs), was developed. The characterizations of XRD, TEM, SEM, BET, XRF and FT-IR were used to analyze the structure and properties of the nano-CuO/HNT loaded catalyst. The XRD patterns indicated that the CuO nanoparticles on HNTs were monoclinic phase. The TEM-EDX and SEM images confirmed that most of nano-CuO catalysts with the crystal size of ca. 20 nm were assembled into the hollow nanotube of HNTs. The catalytic performance of the nano-CuO/HNT catalysts was evaluated by using selective oxidation of cyclohexene. The reaction temperature and recycling times were investigated. The results reveal that the nano-CuO/HNT catalysts exhibit an excellent catalytic oxidation performance for selective oxidation of cyclohexene to 2-cyclohexene-1-one.     

Sonochemical synthesis of hollow PbS nanospheres

PbS hollow nanospheres with diameters of 80-250 nm have been synthesized by a surfactant-assisted sonochemical route. The nanostructures were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), (high-resolution) transmission electron microscopy [(HR)TEM], and scanning electron microscopy (SEM) images. Structural characterization indicates that shells of the hollow spheres are composed of PbS nanoparticles with diameters of about 12 nm. The formation of the hollow nanostructure was explained by a vesicle-template mechanism, in which sonication and surfactant play important roles. Furthermore, uniform silica layers were successfully coated onto the hollow spheres via a modified St?ber method to enhance their performance for promising applications.     

碳微线圈的合成、表征及形态研究

以镍为催化剂,在助剂噻吩的作用下,采用乙炔高温热解法合成了规则、均匀、具有双螺旋结构的碳微线圈.用同一次实验所得的产物,从水平与垂直两个方向研究了碳微线圈形态的变化与分布规律,并进一步通过改变反应器的结构做了比较实验,结合SEM,TEM,SAED和XRD等表征手段对这一规律进行分析研究.结果表明,反应气流的流向以及催化剂在反应过程中发生的物理和化学变化是导致碳微线圈形态变化的两个重要原因.另外,对碳微线圈的结构、生长机理以及噻吩的作用进行了初步研究.     

Preparation and properties of nitrogen-containing hollow carbon nanospheres by pyrolysis of polyaniline-lignosulfonate composites

Polyaniline-lignosulfonate composite hollow spheres were synthesized by using one-step unstirred polymerization of aniline in the presence of lignosulfonate. Novel nitrogen-containing hollow carbon nanospheres were prepared by direct pyrolysis of the polyaniline-lignosulfonate composite spheres at different temperatures under a nitrogen atmosphere. Thermal behavior of the polyaniline-lignosulfonate composite spheres was studied by TG-DTG, FTIR and element analyze instruments. The resultant carbon spheres were characterized by SEM, XRD and nitrogen adsorption-desorption measurement. It was found that the pyrolysis products of the polyaniline-lignosulfonate composite spheres were made up of uniform hollow carbon nanospheres with an average diameter of 135 nm. Furthermore, the hollow carbon nanospheres exhibit high BET surface area range from 381.6 m² g⁻¹ to 700.2 m² g⁻¹. The hollow carbon nanospheres could be used as adsorbents of papain. The papain adsorption capacity for the carbon spheres prepared at 1200 °C was up to 1161 mg g⁻¹ at an initial papain concentration of 10 mg mL⁻¹ at 25 °C.     

Fabrication and photocatalytic properties of SnO2 double-shelled and triple-shelled hollow spheres

SnO₂ double-shelled and triple-shelled hollow spheres were tailored by adjusting concentration of tin (IV) chloride solution during the process of the tin (IV) ions infused carbonaceous spheres. The structures of these SnO₂ multi-shelled hollow spheres were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and their possible formation mechanism were also discussed. In virtue of triple-shelled hollow porous structure and higher specific surface area, SnO₂ triple-shelled hollow spheres exhibited enhanced photocatalytic properties compared to SnO₂ double-shelled hollow spheres.