A novel vertical alignment technology for nematic liquid crystals based on electrostatic self‐assembled method

A novel vertical alignment film for nematic liquid crystals is reported based on electrostatic self‐assembly of alkyl sulfonic salts in aqueous solution. A series of self‐assembled films with different alkyl chain lengths were prepared and used as alignment films. It was revealed that only when the number of carbon atoms in the alkyl chain approaches 11 or larger, could the self‐assembled film induce vertical alignment of liquid crystals. We also found that the homeotropic alignment of liquid crystals was related to the surface roughness of self‐assembled films. In addition, this vertical alignment film showed good electro‐optical characteristics and excellent thermal stability.     

A novel liquid crystals photoalignment layer-by-layer self-assembled film fabricated with long side-chain cinnamate polyelectrolyte

A novel photoalignment film for liquid crystals (LC) was prepared based on layer-by-layer self-assembly of photosensitive long side-chain cinnamate polyelectrolyte. A series of self-assembled films with different methylene spacer groups was prepared and used as alignment film. The film became anisotropic, and could induce uniform alignment of LC after irradiation by linearly polarised ultraviolet light (LPUVL). The effects of spacer chain lengths of the cinnamoyl polycations on the structure and photoalignment properties of the self-assembled film were studied. The polycation films with longer spacer chain obtained a larger dichroic ratio after LPUVL irradiation. The contrast ratio (T _max/T _min) of the LC cell increased with spacer chain length increase. However, it was found that the thermal stability of PSS/PACPYn films decreased with increasing chain length of polycation.     

Alignment of liquid crystals induced by a photopolymerized self-assembled film

An alignment film derived from a photopolymerized self-assembled film may be used to orient nematic liquid crystals after irradiating the film with linearly polarized UV (LPUV). A photosensitive cationic amphiphile was first synthesized containing two double bonds and which could be polymerized by UV. A layer-by-layer self-assembled multilayer film was next prepared in an aqueous solution of the cationic amphiphile and poly(sodium 4-styrenesulphonate); the UV-Vis spectra showed that each layer of the LBL multilayer film was uniform. When the film was irradiated by LPUV, the photosensitive double bonds underwent [2+2] cycloaddition along the vector direction of LPUV. The polarized UV-Vis absorption spectra also provided evidence that the film was anisotropic, i.e. the photopolymerization was along a certain direction. The anisotropic film was used as an alignment layer for nematic liquid crystals, and observations under a polarizing microscope indicated that the alignment of the liquid crystals was good, as expected, and that the orientation direction of the liquid crystals was always perpendicular to the electric vector of the irradiating LPUV.     

Orientation control and fixation of discotic liquid crystal

We established hybrid, horizontal, vertical, and vertical-twisted alignment of discotic liquid crystals on web-coating thin film. Newly developed materials are the photopolymerizable discotic liquid crystals, in order to fix desired novel alignment, the alignment promoters that deposit toward air surface during web coating, followed by drying of solvent, and then accomplish desired alignment of liquid crystals, the alignment layers that promote desired alignment of liquid crystals from the substrate side and the chiral agents, which have strong chiral powers in small amounts. Hybrid aligned discotic liquid crystal thin film has proven quite effective in expanding the viewing angle of thin film transistor liquid crystal displays.     

Photoalignment of liquid crystals by a covalently attached self-assembled ultrathin film

In this paper, the polyanion-containing cinnamoyl group (PACSS-CF3) was self-assembled with diazoresin (DR) to form a kind of stable covalent ultrathin film by irradiation with 365?nm UV light. The photoalignment properties of the DR/PACSS-CF₃ covalent film were investigated. The covalent film was found to have anisotropy after irradiation by 297?nm linearly polarised ultraviolet light (LPUVL), and could induce uniform alignment of liquid crystals (LCs). The pretilt angle of the LC was 2.5°. The stability of the film was enhanced by the covalent bonds. The films were thermally stable to 180°C. Polarised UV-Vis spectroscopy was utilised to investigate the photochemical process of the covalent film. It was found that cinnamoyl moieties parallel to the polarisation direction of the LPUVL were consumed by the photoreaction faster than those perpendicular to the polarisation direction. It can be concluded that the selective photoreaction induced the anisotropy of the films. The anisotropic films induced the homogeneous alignment of LC.     

光敏自组装多层膜用于向列型液晶光控取向的研究

合成了含有光敏基团、双端为季铵阳离子的有机铵盐.将这种季铵盐与聚乙烯基苯磺酸钠用LBL(Layer-by-layer)方法组装成多层分子沉积膜,紫外光谱证明,这个过程为逐层、均匀沉积过程.在偏振紫外光照射下,多层膜中和光矢量方向匹配的光敏基团发生[2+2]环加成反应,形成表面张力各向异性膜.用该薄膜作向列相液晶的取向膜制成反平行液晶器件,在偏光显微镜下观察,发现取得均一、稳定的取向效果.     

Synthesis of novel soluble rubbing-resistant polyimides used as liquid crystal vertical alignment layers

A novel functional diamine N12, containing triphenylamine moiety, biphenyl, tert-butyl substituents and long alkyl chain, N,N-bis(4-aminophenyl)-p-(3,5-di-tert-butyl-4-dodecyloxy phenyl) aniline (N12), was synthesised and characterised. A series of polyimides (PIs) were prepared based on 2,2?-bis(trifluoromethyl)benzidine, 4,4?-oxydiphthalicanhydride and different contents of N12 via a conventional two-step procedure that included a ring-opening polyaddition to gain polyamic acids, followed by chemical cyclodehydration. The chemical structures of the intermediates, diamines and PIs were characterised by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. All of the PIs were amorphous and exhibited good solubility in both polar aprotic solvents and some low boiling point solvents. PIs containing different content of N12 could induce highly uniform vertical alignment of liquid crystals (LCs). More importantly, PIs derived from N12 showed a good rubbing resistance. Besides, all PI films showed high transmittance in the wavelength range 400–700 nm and good thermal stabilities. Such PIs could be suitable candidates for alignment layers used in the manufacture of high-performance vertical alignment mode LC displays.     

WHAT ARE THE DIFFERENCES OF POLYMER SURFACE RELAXATION FROM THE BULK?

The polymer surface relaxation in thin films has been a long debating issue.We report a new method on studying surface relaxation behaviors of polymer thin films on a solid substrate.This method involved utilizing a rubbed polyimide surface with a pretilting angle in a liquid crystalline cell.Due to the surface alignment,the liquid crystals were aligned along the rubbing direction.During heating the liquid crystalline cell,we continuously monitored the change of orientation of the liquid crystals.It is u...     

The characteristics of SnPc-doped ferroelectric liquid crystal cells

Tin phthalocyanine (SnPc)-doped polymer films were used to align ferroelectric liquid crystals (FLC). A stripe-shaped domain structure was obtained spontaneously in the initial alignment of the surface-stabilized cells. Atomic force microscopy (AFM) was introduced to investigate the aligning films. It was discovered that the modified aligning films show a polymer aggregate chain structure oriented along the rubbing direction that may play an important role in the FLC alignment. The stability, memory capability and response time of the cell were improved and enhanced through the doping process.     

A novel photoalignment film for ferroelectric liquid crystal based on self-assembled monolayer method

A novel strategy based on self-assembly technology was devised for design of photosensitive material as a ferroelectric liquid crystal (FLC) alignment layer. This development offers new tools for the study and control at the molecular level of the interaction of FLCs with solid surfaces. The photoreactive material was self-assembled to the substrate by covalent bond linkage due to a special chemical adsorption reaction. Through ester bond linkage, a cyano group with strong polarity was introduced to be terminus of the film. Under irradiation of linearly polarised ultraviolet light, an optically anisotropic self-assembled film was easily obtained. The irradiated film was demonstrated to result in homogenous alignment of FLC by optical transmittance measurements and polarising optical microscopy images of a FLC cell at different rotation angles. The alignment quality of the FLC on this self-assembled monolayer film is comparable to that of commercial rubbed polyimide film. Furthermore, it was also found that the fine alignment of the FLC may be related to the smoothness of the self-assembled film surface owing to its polar end.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T_g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

一种新型的氢键自组装液晶光控取向膜

报道了一种新型的以氢键为驱动力的液晶自组装光控取向膜, 研究了薄膜的制备方法与光敏特性. 通过聚(4-乙烯基吡啶)中的吡啶基团与光敏聚丙烯酰氧基肉桂酸间的氢键作用制备了LBL(layer-by-layer)型的自组装多层膜, 制备过程的紫外-可见光谱表明, 该组装过程为逐层、均匀沉积过程. 傅里叶变换红外光谱表明, 多层膜的成膜驱动力为氢键. 用线性偏振紫外光辐照该薄膜, 多层膜中与光矢量方向匹配的光敏基团发生[2+2]环加成反应, 形成表面张力各向异性的薄膜. 用该薄膜作为向列相液晶的取向膜制成平行液晶器件, 在偏光显微镜下观察, 发现获得了均一、稳定的取向效果.     

UV-driven switching of chain orientation and liquid crystal alignment in nanoscale thin films of a novel polyimide bearing stilbene moieties in the backbone

A novel photosensitive polyimide, poly(4,4'-stilbenylene 4,4'-oxidiphthalimide) (ODPA-Stilbene PSPI) was newly synthesized. The most surprising feature of this PSPI is that the PSPI films irradiated with linear polarized ultraviolet light (LPUVL) can favorably induce a unidirectional alignment of liquid crystals (LCs) in contact with the film surface and further switch the director of the unidirectionally aligned LCs from a perpendicular direction to a parallel direction with respect to the polarization direction of LPUVL by simply controlling the exposure dose in the irradiation process. These LPUVL-irradiated films were found to provide high anchoring energy to LCs, always giving very stable, homogeneous cells with unidirectionally aligned LCs regardless of the LC alignment directions. In the films, the PSPI polymer chains were found to undergo favorably unidirectional orientation via a specific orientation sequence of the polymer chain segments led by the directionally selective trans-cis photoisomerization of the stilbene chromophore units in the backbone induced by LPUVL exposure. Such unidirectionally oriented polymer chains of the films induce alignment of the LCs along the orientation direction of the polymer chains via favorable anisotropic molecular interactions between the oriented polymer chain segments and the LC molecules. In addition, the PSPI has an excellent film formation processibility; good quality PSPI thin films with a smooth surface are easily produced by simple spin-coating of the soluble poly(amic acid) precursor and subsequent thermal imidization process. In summary, this new PSPI is the promising LC alignment layer candidate with rubbing-free processing for the production of advanced LC display devices, including LC display televisions with large display areas.     

Alignment of liquid crystals induced by a photopolymerized self‐assembled film

An alignment film derived from a photopolymerized self‐assembled film may be used to orient nematic liquid crystals after irradiating the film with linearly polarized UV (LPUV). A photosensitive cationic amphiphile was first synthesized containing two double bonds and which could be polymerized by UV. A layer‐by‐layer self‐assembled multilayer film was next prepared in an aqueous solution of the cationic amphiphile and poly(sodium 4‐styrenesulphonate); the UV‐Vis spectra showed that each layer of the LBL multilayer film was uniform. When the film was irradiated by LPUV, the photosensitive double bonds underwent [2+2] cycloaddition along the vector direction of LPUV. The polarized UV‐Vis absorption spectra also provided evidence that the film was anisotropic, i.e. the photopolymerization was along a certain direction. The anisotropic film was used as an alignment layer for nematic liquid crystals, and observations under a polarizing microscope indicated that the alignment of the liquid crystals was good, as expected, and that the orientation direction of the liquid crystals was always perpendicular to the electric vector of the irradiating LPUV.     

Alignment control of liquid crystals on surface relief gratings

Liquid crystal alignment layers of a high T _g polymer containing an azobenzene moiety are prepared by photofabrication of a surface relief grating (SRG). The interference pattern of a circular and linearly polarized Ar⁺ laser beam generated the surface relief grating and the morphology was detected by atomic force microscope. The optical anisotropy of the films was investigated by polarizing optical microscopy. The orientation of the optical axis of the film mainly depends on the direction of the initial polarization plane. Nematic liquid crystals were aligned parallel to the direction of the grating, but the pretilt angles of the liquid crystals were nearly zero. Irradiation with homogeneous linearly polarized light could also align liquid crystals, but this alignment capability was weaker than that of the SRG film.     

Factors in liquid crystal photoalignment on polymer films: photoorientation versus self-assembly

We demonstrate that photostimulated self-assembly, running in parallel with molecular photoorientation in the top layer of the aligning polymer film, breaks the bulk molecular order mainly determined by the symmetry of irradiation. This may substantially modify liquid crystal (LC) alignment. Depending on the chemical composition of the liquid crystal, the self-assembled layers may influence either homeotropic or planar LC alignment with extremely weak azimuthal anchoring. Effective self-assembly occurs in polymers having side chain chromophores with flexible spacers and polar terminal groups.     

Effect of alkanethiol chain length on gold nanoparticle monolayers at the air-water interface

In this study, we report the effects of the alkyl chain length on alkanethiol-capped gold nanoparticle Langmuir films. Gold nanoparticles (2-3 nm) capped with C(n)H(2n+1)SH (n = 5-12, 14-16, 18) were prepared via a two-phase synthesis. The films were sampled by Langmuir-Schaefer horizontal transfer at various points in the pressure-area isotherm and monitored with transmission electron microscopy. Changes in surface pressure, temperature, and alkyl chain length did not lead to observable differences in the mesoscale film morphology. Pressure-area isotherms at 22 °C, however, revealed that the work of compression and the collapse pressure are directly dependent on alkyl chain lengths of 14 carbons or greater. Variable temperature isotherms suggest that the work of compression is strongly affected by the phase state (i.e., crystalline vs liquid-like) of the gold-thiolate self-assembled monolayer (SAM) capping the nanoparticles.     

Polar and azimuthal alignment of a nematic liquid crystal by alkylsilane self-assembled monolayers: effects of chain-length and mechanical rubbing

Alkylsilane self-assembled monolayers (SAMs) on oxide substrates are commonly used as liquid crystal (LC) alignment layers. We have studied the effects of alkyl chain length, photolytic degradation, and mechanical rubbing on polar and azimuthal LC anchoring. Both gradient surfaces (fabricated using photolytic degradation of C18 SAMs) and unirradiated SAMs composed of short alkyl chains show abrupt transitions from homeotropic to tilted alignment as a function of degradation or chain length. In both cases, the transition from homeotropic to tilted anchoring corresponds to increasing wettability of the SAM surfaces. However, there is an offset in the critical contact angle for the transition on gradient vs unirradiated SAMs, suggesting that layer thickness is more relevant than wettability for LC alignment. Mechanical rubbing can induce azimuthal alignment along the rubbing direction for alignment layers sufficiently near the homeotropic-to-planar transition. Notably, mechanical rubbing causes a small but significant shift in the homeotropic-to-tilted transition, e.g., unrubbed C5 SAMs induce homeotropic anchoring, but the same surface after rubbing induces LC pretilt.     

Synthesis and characterization of non-symmetrical liquid crystals containing a cholesteryl ester moiety

In this paper,a series of chiral non-symmetrical liquid crystals(nBA-chol)consisting of a cholesteryl ester moiety as chiral entity and a biphenyl aromatic core with different terminal alkyl chain has been synthesized and investigated for their liquid crystalline properties.Effects of numbers of methylene units in the terminal alkyl chain on the phase transition temperatures and on the temperature-dependent pitch lengths of the chiral liquid crystals have been studied.The long terminal alkyl chain tends ...     

Surface tension and fluid flow driven self-assembly of ordered ZnO nanorod films for high-performance field effect transistors

Colloidal nanorods of inorganic semiconductors are of interest for a range of optoelectronic devices. The ability to self-assemble these materials into ordered arrays by solution-processing techniques is crucial for achieving adequate device performance. Here we show that uniform ZnO nanorod films with defined nanorod alignment can be solution-deposited over large areas by controlling the surface energy of the nanorods through the choice of suitable ligands and by the fluid flow direction during growth. ZnO nanorods with long carbon chain ligands exhibit a smaller surface free energy than those with short carbon chain ligands resulting in better in-plane alignment and large domain sizes up to dozens of micrometers in spin-coated films. A model is presented to rationalize the observed self-assembly behavior. It is based on the formation of a lyotropic liquid crystalline phase on the surface of the liquid film which is facilitated by enhanced segregation of nanorods with low surface tension to the surface. Alignment of the nanorods is controlled by radial and vertical liquid flows in the drying solution. The ability to control the orientation of the nanorods and to achieve large domain size results in significant device performance improvement. Field-effect transistors with mobilities of up to 1.2-1.4 cm2/V.s are demonstrated in spin-coated, in-plane aligned ZnO nanorod films subject to postdeposition hydrothermal growth.