Protection of stainless steel by the electrodeposition of polyaniline/poly(o-phenylenediamine) composite layers

Three polyaniline (PANI)/poly(o-phenylenediamine) (PoPD) mixtures have been electrochemically deposited on a stainless steel surface from an acidic solution. Electrocopolymerization was favorable at high molar ratios of aniline to o-phenylenediamine, and the resulting copolymer is a random type. Two bilayers, PoPD/PANI and PANI/PoPD, were prepared by successive electrodeposition, during which different multiphase structures were obtained. The presence of PoPD with PANI in the copolymer or multilayer structures enhances the passivation of the SS. The bi-layer coating in which a PANI layer lies under the PoPD produced the best passive oxide on the SS. The resistance to pitting increases with the coating order as follows: PANI < copolymer ? PANI/PoPD < PoPD < PoPD/PANI.     

Thermal analysis of polyaniline poly(N-vinylpyrrolidone)-stabilized dispersions

The polyaniline dispersions stabilized with poly(N-vinylpyrrolidone) (PANI/PVP) were synthesized by oxidative polymerization with different mass ratios of PANI and PVP and different molar concentrations of the components in the polymerization mixture. The composite powders prepared from colloidal PANI/PVP dispersions were characterized by thermogravimetry and differential thermal analysis. The change in the ratio of PANI and PVP as well as the starting molar concentrations of aniline hydrochloride and oxidant has influence on the resulting properties of the dispersions. Concerning the doping, the results show that PANI/PVP powders are stable up to approximately 160 °C. Degradation of polymer chains starts at temperatures above 250 °C. The PANI/PVP composite powders with lower content of PANI exhibit slightly higher thermal stability. Further, colloidal PANI/PVP dispersions were screen-printed on aluminum foil for infrared spectroscopic characterization and on poly(ethylene terephthalate) foil for electrical measurements. The sheet resistance of printed layers measured by two-point probe was of the order of tens to thousands of kΩ sq^?1. The influence of both the change in the composition and the drying temperature is discussed.     

Effect of aromatic substitution in aniline on the properties of polyaniline

Substitution in aniline has tremendous effect in the synthesis of poly(substituted anilines) as well as in their properties. In this investigation polyaniline (PANI), poly(m-nitro aniline) (PMNA), poly(m-amino phenol) (PMAP) and poly(o-ethyl aniline) (POEA) were synthesized by oxidative polymerization under identical conditions. Different properties were measured and compared with PANI to find out the presence of electron donating -OH group, electron withdrawing -NO₂ group and less effecting ethyl group on the properties of poly(substituted anilines). It was found that presence of any type of substitution in the benzene ring of aniline increases the solubility of the resulted polymer but reduces the yield, degree of polymerization, thermal stability, electrical and thermal conductivity. The colors, bulk density, particle size, percentage of crystallinity vary considerably depending on the nature of substitution.     

Conductive composite of polyaniline and tungsten carbide

Conductive polyaniline/tungsten carbide (PANI/TC) composite was synthesized via polymerization of the aniline monomer by (NH₄)₂S₂O₈/H₂SO₄ oxidant system in the presence of an aqueous suspension of TC. The structure, thermal stability and conductivity of PANI/TC composite were studied and the results were also compared with the pure PANI. The results showed that there was a strong interaction between the TC particles and PANI molecular chains. The crystalline structure of TC remained undisturbed upon with interaction with PANI chains. The thermal stability of PANI/TC composite was better than that of pure PANI. The direct current conductivity values of PANI/TC composite decreased slowly as the temperature increased from 25 to 165°C and PANI/TC composite exhibited significantly higher conductivity than the pure PANI.     

Synthesis and characterization of polyaniline–zirconium dioxide and polyaniline–cerium dioxide composites with enhanced photocatalytic degradation of rhodamine B dye

For the first time, chloroform and 2-butanol were used as solvent systems for the preparation of ZrO₂–PANI and CeO₂–PANI composites. Solubility of the synthesized composites was studied in chloroform, N-methyl-2-pyrrolidinone (NMP), and in mixture of toluene?+?2-propanol (2:1). XRD and cyclic voltammetry data showed that the ZrO₂–PANI and CeO₂–PANI composites possess both crystalline and amorphous domains indicating some sort of conductivity. TGA results showed that ZrO₂–PANI composite have a better thermal stability than pure PANI; however, CeO₂–PANI composite has lower thermal stability than pure PANI. The conjugated unsaturated structure of PANI is responsible for the enhanced photocatalytic properties of ZrO₂–PANI and CeO₂–PANI. Photocatalytic results showed that, at photolysis time of 60 min, rhodamine B (RhB) dye was degraded up to 34 and 35% by ZrO₂–PANI and CeO₂–PANI, respectively. The degradation products of RhB were quantified by LC–MS and GC–MS, and accordingly, a detailed pathway was proposed.     

Electrochemical nanogravimetric study on the ruthenium(III) trichloride–polyaniline nanocomposite

Ruthenium(III) trichloride microcrystals were soaked in aniline and aniline/acetonitrile mixtures. In all cases, polyaniline (PANI) was formed as a result of the intercalation of aniline into the layered structure of RuCl₃ crystal and the reaction between aniline and the host material. The appearance of polyaniline was proven by infrared spectroscopy. The as-formed (PANI) _x ^z+(RuCl₃) _y ^z− nanocomposites were attached to gold surfaces and studied by cyclic electrochemical nanogravimetry. The sorption of aniline and its effect on the nanocomposites immobilized on gold were also studied in supporting electrolytes. The redox behaviour of the composite shows the electrochemical transformations of both polyaniline and RuCl₃. The redox waves of PANI are similar to those observed for very thin PANI films. It attests that the response is originated from monolayer-like PANI film situated between RuCl₃ layers. The transport of the charge-compensating ions reflects the variation of the oxidation states of both PANI and RuCl₃. The nanocomposites behave as self-doped layers in the potential region when both constituents are charged, i.e. PANI is partially oxidized while RuCl₃ is partially reduced, since the electroneutrality is assured by mutual charge compensation. When PANI is reduced, cations enter the layer to counterbalance the negative charge resulting from the reduction of Ru(III) to Ru(II). It was also found that the intercalation of water molecules is—albeit still substantial—smaller than that of pure RuCl₃ microcrystals, which is related to the presence of PANI between the RuCl₃ layers. Dedicated to Prof. Mikhail A. Vorotyntsev on the occasion of his 60th birthday     

Thermal stability and glass transition behavior of PANI/γ-Al2O3 composites

Polyaniline/γ-Al₂O₃ (PANI/γ-Al₂O₃) composites were synthesized by in-situ polymerization at the presence of HCl as dopant by adding γ-Al₂O₃ nanoparticles into aniline solution. The composites were characterized by FTIR and XRD. The thermogravimetry (TG) and modulated differential scanning calorimetry (MDSC) were used to study the thermal stability and glass transition temperature (T _g) of the composites, respectively. The results of FTIR showed that γ-Al₂O₃ nanoparticles connected with the PANI chains and affected the absorption characteristics of the composite through the interaction between PANI and nano-sized γ-Al₂O₃. And the results of XRD indicated that the peaks intensity of the PANI/γ-Al₂O₃ composite were weaker than that of the pure PANI. From TG and derivative thermogravimetry (DTG) curves, it was found that the pure PANI and the PANI/γ-Al₂O₃ composites were all one step degradation. And the PANI/γ-Al₂O₃ composites were more thermal stable than the pure PANI. The MDSC curves showed that the nano-sized γ-Al₂O₃ heightened the glass transition temperature (T _g) of PANI.     

Synthesis,Characterization and Electrorheological Properties of Polyaniline/Titanate Core-Shell Composite

In this study, a facile method was developed for the preparation of a new conducting polymer composite with core-shell structure. The surfaces of layered titanate (K₂Ti₄O₉) particles were first modified with 3-aminopropyltriethoxysilane, and then a polyaniline/titanate (PANI/K₂Ti₄O₉) composite was synthesized via chemical oxidative polymerization. The resulting composites were characterized by SEM, XRD, FTIR and TG measurements. The results indicated that the PANI deposited on the surface of K₂Ti₄O₉ particles resulted in the formation of the composite with a core-shell structure. TG analysis showed that the composite containing 28.7 wt% PANI had better thermal stability than that of pure PANI. Further, the PANI/K₂Ti₄O₉ composite particles were adopted as a dispersed phase in silicone oil for electrorheological (ER) investigation. Suspension of the composite particles exhibited typical ER behavior subjected to an external electric field under steady and dynamic oscillatory shear.     

Water-processable nanocomposite based on polyaniline and 2D molybdenum disulfide for NIR-transparent ambipolar transport layers

Polymer nanocomposite based on stable water-dispersible polyaniline complex with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PANI–PAMPSA) and 2D molybdenum disulphide (MoS₂) was developed. The nanocomposite layers obtained by drop-casting were characterized by Vis–NIR- and FTIR spectroscopies, as well as by atomic force, transmission electron, and Kelvin-probe microscopies, X-ray diffraction, cyclic voltammetry, Hall effect, and DC-conductivity measurements. It was shown that the preparation procedure allows easy adjusting of MoS₂ content in the nanocomposite resulting in the growth of DC conductivity by up to six times in the case of 20 wt% MoS₂ as compared with the additive-free PANI–PAMPSA complex. FTIR spectroscopy revealed the existence of hydrophobic interactions between PANI–PAMPSA and 2D MoS₂ nanophase, which facilitate interchain electron transfer. Hall effect studies showed that while increasing MoS₂ content in the nanocomposite, a transition occurs from monopolar hole transport, characteristic of PANI–PAMPSA, to ambipolar transport. This feature makes the obtained PANI–PAMPSA/MoS₂ composite a promising material for different optoelectronic devices, in particular tandem solar cells.     

Synthesis,characterization, luminescence and magnetic properties of composite of polyaniline with nickel bisacetylacetonate complex

The present study involves the synthesis of polyaniline (PANI) and its composite with nickel bis(acetylacetonate) complex (Ni(acac)₂) via chemical oxidative polymerization method. PANI-Ni(acac)₂ composite was characterized by energy dispersive X-rays (EDX), fourier transformer infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques. Luminescence study was performed by UV–visible and fluorescence techniques. Relative fluorescence quantum yield of composite is a few orders of magnitude higher than pure PANI. The high fluorescence quantum yield of composite is probably due to greater chances of exciton formation and subsequent radiative decay to the ground state. Differential scanning calorimetric analysis (DSC) revealed higher thermal stability of composite than pure PANI, thereby allowing its use in devices which run at higher temperatures. On increasing the applied magnetic field, magnetic moment increases in both Ni(acac)₂ complex and PANI-Ni(acac)₂ composite, unlike to that in pure PANI. Thus, the present study holds promise for thermal purposes, luminescence properties and magnetic applications of the polyaniline composite.     

Selective Formation of Polyaniline Confined in the Nanopores of a Metal–Organic Framework for Supercapacitors

In this study, a strategy that can result in the polyaniline (PANI) solely confined within the nanopores of a metal–organic framework (MOF) without forming obvious bulk PANI between MOF crystals is developed. A water-stable zirconium-based MOF, UiO-66-NH₂, is selected as the MOF material. The polymerization of aniline is initiated in the acidic suspension of UiO-66-NH₂ nanocrystals in the presence of excess poly(sodium 4-styrenesulfonate) (PSS). Since the pore size of UiO-66-NH₂ is too small to enable the insertion of the bulky PSS, the quick formation of pore-confined solid PANI and the slower formation of well dispersed PANI:PSS occur within the MOF crystals and in the bulk solution, respectively. By taking advantage of the resulting homogeneous PANI:PSS polymer solution, the bulk PANI:PSS can be removed from the PANI/UiO-66-NH₂ solid by successive washing the sample with fresh acidic solutions through centrifugation. As this is the first time reporting the PANI solely confined in the pores of a MOF, as a demonstration, the obtained PANI/UiO-66-NH₂ composite material is applied as the electrode material for supercapacitors. The PANI/UiO-66-NH₂ thin films exhibit a pseudocapacitive electrochemical characteristic, and their resulting electrochemical activity and charge-storage capacities are remarkably higher than those of the bulk PANI thin films.     

Polyaniline-coated coconut fibers: Structure,properties and their use as conductive additives in matrix of polyurethane derived from castor oil

Electrically conducting fibers based on coconut fibers (CF) and polyaniline (PANI) were prepared through in situ oxidative polymerization of aniline (ANI) in the presence of CF using iron (III) chloride hexahydrate (FeCl_3.6H₂O) or ammonium persulfate (APS) as an oxidant. The PANI-coated coconut fibers (CF-PANI) displayed various morphologies, electrical conductivities and percentages of PANI on the CF surface. For both systems, a PANI conductive layer was present on the CF surface, which was responsible for an electrical conductivity of around 1.5 × 10⁻¹ and 1.9 × 10⁻² S cm⁻¹ for composites prepared with FeCl₃.6H₂O and APS, respectively; values that are similar to that of pure PANI. In order to modify the structure and properties of polyurethane derived from castor oil (PU) both CF-PANI and pure PANI were used as conductive additives. The PU/CF-PANI composites exhibited higher electrical conductivity than pure PU and PU/PANI blends. Additionally, the PU/CF-PANI composites showed a variation in electrical resistivity according to the compressive stress applied, indicating that these materials could be applied for pressure-sensitive applications.     

Electroactivity, electrochemical stability and electrical conductivity of multilayered films containing poly(3,4-ethylendioxythiophene) and poly(N-methylpyrrole)

Multilayered systems of poly(3,4-ethylendioxythiophene) and poly(N-methylpyrrole) have been prepared using a layer-by-layer electrodeposition technique. The electrochemical and electrical properties of films formed by 3, 5, 7 and 9 layers have been characterized and compared with those of pure polymers and copolymers prepared from mixtures of 3,4-ethylendioxythiophene and N-methylpyrrole with various concentration ratios. Results indicate that the electroactivity and electrical stability of the multilayered systems are higher than those of both poly(3,4-ethylendioxythiophene) and copolymers. Furthermore, these electrochemical properties improve when the number of layers increases. On the other hand, the electrical conductivity of the multilayered systems is slightly lower than that of pure poly(3,4-ethylendioxythiophene), and significantly higher than those of poly(N-methylpyrrole) and copolymers.     

A study of magnetic,antibacterial and antifungal behaviour of a novel gold anchor of polyaniline/itaconic acid/Fe3O4 hybrid nanocomposite: Synthesis and characterization

The objective of the present investigation is to fabricate the gold anchor polyaniline (PANI) based nanocomposites which is prepared using itaconic acid (IA) with Fe₃O₄ by the simple polymerization reaction. The developed multi responsive antibacterial magnetic polymeric composite is represented as Au@PANI–IA–Fe₃O₄. Further, the chemical structure, thermal and magnetic properties such as FT-IR, TGA/DTA, and VSM analysis are studied. The TEM and SEM/EDX are used to find the shape and composition of gold nanoparticles. The enhanced magnetic properties of ferrite composite are exhibited and the antibacterial properties are determined using E. coli (gram -ve) and S. aureus (gram +ve) bacteria’s. The results of biological properties such as antifungal and antimicrobial are also studied critically conferred. Based on the experimental results, the fabrication method of Au@/PANI/IA/Fe₃O₄ magnetic nanocomposites, and the relationship between the structure and biological properties are discussed in detail.     

Formation of polyaniline/Pt nanoparticle composite films and their electrocatalytic properties

Polyaniline (PANI) thin films modified with platinum nanoparticles have been prepared by several methods, characterised and assessed in terms of electrocatalytic properties. These composite materials have been prepared by the in situ reduction of a platinum salt (K₂PtCl₄) by PANI, in a variety of solvents, resulting in the formation of platinum nanoparticles and clusters of different sizes. The further deposition of platinum clusters at spin cast thin films of PANI/Pt composites from a neutral aqueous solution of K₂PtCl₄ has also been demonstrated. Thin-film electrodes prepared from these materials have been investigated for their electrocatalytic activity by studying hydrazine oxidation and dichromate reduction. The properties of the composite materials have been determined using UV–visible spectroscopy, atomic force microscopy and transmission electron microscopy. The nature of the material formed is strongly dependent on the solvent used to dissolve PANI, the method of preparation of the PANI/Pt solution and the composition of the spin cast thin film before subsequent deposition of platinum from the aqueous solution of K₂PtCl₄.Dedicated to Professor Dr. Alan Bond on the occasion of his 60th birthday.     

Preparation and Characterization of In-Situ Polymerized Nanocomposites Based on Polyaniline in Presence of MWCNTs

Summary: Polyaniline (PANI) composites were prepared with both unmodified and amine modified MWCNTs with and without BaTiO₃ through in-situ oxidative polymerization. Uniform coating of PANI on the MWCNTs and BaTiO₃ surfaces was found which was evident from the Field Emission Scanning Electron Microscopic (FESEM) and High Resolution Transmission Electron Microscopic (HRTEM) images. The structure of pure and amine modified MWCNTs was identified by Fourier Transform Infrared Spectroscopy (FTIR). The thermal stability of the amine modified composite with BaTiO₃ is higher than that of the unmodified composite because of the better affinity between modified MWCNTs and polymer matrix and due to the higher stability of barium titanate itself. The capacitance of amine modified MWCNTs and BaTiO₃ composites was less than that of the pure MWCNTs composites but the thermal stability increased in amine modified MWCNTs and BaTiO₃ composites with respect to the pure MWCNTs composites. The maximum capacitance and energy density values were found in MWCNT/PANI composites which were equal to 523.20 F/g and 142.83 Wh/kg respectively at a scan rate of 10mv/s. Maximum power density was found to be 5147.70 W/kg in the same composite at a scan rate of 200 mv/s.     

Constructing magnetic polyaniline/metal hybrid nanostructures using polyaniline/Fe3O4 composite hollow spheres as supports

Polyaniline (PANI)/Fe₃O₄ composite hollow spheres have been successfully synthesized in one step using sulfonated polystyrene (PS) spheres as templates. The magnetic PANI hollow spheres were used as supports for noble metal nanoparticles (NPs) such as Au and Pd. The morphology, composition and magnetic properties of the resulting products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, inductively coupled plasma (ICP) atomic spectra and vibrating sample magnetometer. The catalytic activity of magnetic PANI/Au composite shells on the oxidation of dopamine was investigated by cyclic voltammetry. The obtained results provide our product with a practical application for the detection of dopamine. On the other hand, the catalytic activity of magnetic PANI/Pd composite shells on the reduction of 4-nitroaniline was investigated by spectroscopic methods and compared with Pd/C catalyst which was already widely used in industrial production.     

Thermal stability of several polyaniline/rare earth oxide composites

Polyaniline/rare earth oxide composites (PANI/La₂O₃ and PANI/Sm₂O₃) were synthesized by in situ polymerization at the presence of sulfosalicylic acid (as dopant). The composites obtained were characterized by Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The thermal stability of the composites was investigated by thermogravimetry (TG) and derivative thermogravimetry (DTG). The electrochemical performance of the composites was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results of FTIR, XRD, SEM, CV, and EIS show that the structure of composite has changed greatly when rare earth oxide content is >0.7 g (PANI/La₂O₃[w/w(92.7/7.3)] and PANI/Sm₂O₃[w/w(96.2/3.8)]) and the PANI in the composite has transformed into pernigraniline base (non-conducting state) from emeraldine base (conducting state). TG-DTG analysis indicates that the thermal stability of composite was higher than pure PANI, which is attributed to the interaction between PANI and rare earth oxide.     

Radar Absorption Properties of Ni0.5Zn0.5Fe2O4/PANI/epoxy Nanocomposites

A nitrate? citrate gel was prepared from metallic nitrates and citric acid by sol? gel process and was further used to synthesize Ni_0.5Zn_0.5Fe₂O₄ nanocrystalline powder by auto‐combustion. Then, two novel 15 and 35% (w/w) magnetic Ni_0.5Zn_0.5Fe₂O₄ containing polyaniline nanocomposites, named as PANI‐Ni15 and PANI‐Ni35, respectively, were prepared via in‐situ polymerization of aniline in an aqueous solution containing proper amount of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder. The incorporation of the nanopowders to PANI matrix was confirmed by X‐ray diffraction (XRD), IR and SEM. Synthesized PANI‐NiZn ferrite composite particles were subsequently added to an epoxy resin matrix to produce related nanocomposites. The morphological properties of these nanocomposite materials were investigated by SEM and TEM. The electromagnetic‐absorbing properties were studied by measuring the reflection loss in the frequency range of 8.0 to 12.0 GHz. Results showed the reflection loss of the PANI‐Ni35 composite is higher than pure polyaniline and PANI‐Ni15. The good reflection loss of the nanocomposites suggests their potential applicability as radar absorber.     

Synthesis and characterization of polyaniline/silicon dioxide composites and preparation of conductive films

The focus of this study was to synthesize the inherently conductive polymer polyaniline using an optimized process to prepare polyaniline/silicon dioxide (PANI/SiO₂) composites by in situ polymerization and ex situ solution mixing. PANI and PANI/SiO₂ composite films were prepared by drop‐by‐drop and spin coating methods. The electrical conductivities of HCl doped PANI film and PANI/SiO₂ composite films were measured according to the standard four‐point‐probe technique. The composite films exhibited an increase in electrical conductivity over neat PANI. PANI and PANI/SiO₂ composites were also investigated by spectroscopic methods including UV‐Vis, FT‐IR, and Photoluminescence. UV‐Vis and FT‐IR studies showed that SiO₂ particles affect the quinoid units along the polymer backbone and indicate strong interactions between the SiO₂ particles and the quinoidal sites of PANI (doping effect). The photoluminescence properties of PANI and PANI/SiO₂ composites were studied and the PANI/SiO₂ composites showed increased intensity as compared to neat PANI. The increase of conductivity of PANI/SiO₂ composite may be partially due to the doping or impurity effect of SiO₂ where the silicon dioxides compete with chloride ions. The morphology of particles and films were examined by a scanning electron microscope (SEM). SEM measurements indicated that the SiO₂ were well dispersed and isolated in composite films. Copyright © 2009 John Wiley & Sons, Ltd.