Absorption spectra of the 4f electron transitions of the praseodymium complex with 1-cyclopropyl-6-fluoro-1,4-dihydro-7-(4-ethyl-1-piperazinyl) -4-oxo-3-quinoline carboxylic acid hydrochloride and its analytical application.

The absorption spectra of the praseodymium complex with 1-cyclopropyl-6-fluoro-1,4-dihydro-7-(4-ethyl-1-piperazinyl)-4-oxo-3- quinoline carboxylic acid hydrochloride (NNFX) has been studied by normal and derivative spectrophotometry. The complex showed maximum absorption at 350 nm at pH 6.0. The stoichiometry of the Pr-NNFX complex was calculated by the molar ratio and continuous variation methods. The ratio of Pr to NNFX was 1:3. The absorption bands of the 4f electron transitions of the praseodymium complex with NNFX are enhanced markedly, especially the wavelength at 481 nm. Using the third-derivative spectrum, the calibration graph is linear over the range 2.5 x 10(-5)-3.5 x 10(-4) mol dm-3 for praseodymium. The detection limits (signal-to-noise ratio of 2) is 1.4 x 10(-6) mol dm-3. The relative standard deviation is 1.2% for 7.0 x 10(-5) mol dm-3 of praseodymium. A method for the direct determination of praseodymium in rare earth mixtures with good accuracy and selectivity is described.     

Visible absorption spectra of the 4f electron transitions of neodymium, praseodymium, holmium and erbium complexes with fleroxacin and their analytical application.

The absorption spectra of the 4f electron transitions of neodymium, praseodymium, holmium and erbium complexes with fleroxacin in the presence of cetylpyridinium chloride were studied by normal and derivative spectrophotometry. Their molar absorptivity at the maximum absorption bands are about 5.3 (at 571 nm) times greater for neodymium, 2.8 (at 483 nm) times greater for praseodymium, 12.6 (at 448.5 nm) times greater for holmium and 9.7 (at 519 nm) times greater for erbium than those in the absence of complexing agents. The second-derivative spectrum is used both to eliminate the interference from other rare earths and to improve the sensitivity. Beer's law is obeyed from 3.0 - 70 microg ml(-1) for neodymium and holmium, from 6.0 - 70 microg ml(-1) for erbium, and from 12.0 - 70 microg ml(-1) for praseodymium. The relative standard deviations are 1.9% and 1.5% for 7.5 microg ml(-1) of neodymium and holmium, and 2.1% and 1.6% for 15.0 microg ml(-1) of praseodymium and erbium, respectively. Their detection limits (signal-to-noise ratio = 2) are 3.2 microg ml(-1), 1.3 microg ml(-1), (1.1) microg ml(-1) and 2.5 microg ml(-1) for praseodymium, neodymium, holmium and erbium, respectively. A new system for the simultaneous determinations of the praseodymium, neodymium, holmium and erbium in rare earth mixtures with good accuracy and selectivity is proposed.     

Derivative spectrophotometric determination of praseodymium in rare earth mixtures with lomefloxacin

Praseodymium forms a Pr(LMFX)(3) complex with lomefloxacin. In this paper, the absorption spectra of the complex has been investigated by applying conventional and derivative spectrophotometric methods. It was found that lomefloxacin could form a stable complex with praseodymium in the pH 6.5-8.5 media. The absorption intensity of the complex is 4.5-fold more than PrCl(3). Using the second derivative spectra, the sensitivity is 7.4 times higher for Pr than in the normal method (zero derivative spectra). The second derivative spectrophotometry for determination of praseodymium in the presence of other rare earths has been developed. The calibration curves were linear in the range of 3.5-65 mug ml(-1) for Pr. The detection limit is 0.85 mug ml(-1). The method is satisfactory for the determination of praseodymium in mixed rare earths.     

Direct spectrophotometric determination of Nd in mixed rare earths with semi-xylenol orange and cetylpyridinium chloride

The derivative absorption spectra of the neodymium complex with Semi-Xylenol Orange and cetylpyridinium chloride has been investigated. The characteristic absorption of the complex is approximately 350 times that of neodymium chloride. The fourth-order derivative spectrum has been used to eliminate the interference of the other lanthanides, and to increase the sensitivity by a further factor of 6. Beer's law is obeyed for 0-7.5 microg of Nd in 25 ml of solution. The relative standard deviation for 7 determinations of 1.8 microg/25 ml neodymium was 1.3%. The detection limits were 5.8 ng/ml in the absence of lanthanum and 11.2 ng/ml in the presence of 44 ng/ml lanthanum (or 36 ng/ml yttrium). The method has been used for the determination of neodymium in mixed rare earths, with satisfactory results.     

Determination of neodymium, holmium and erbium in mixed rare earths by norfloxacin

Norfloxacin (NFX) is proposed as reagent for the derivative spectrophotometric determination of neodymium, holmium and erbium in mixed rare earths. The absorption spectra of 4f electron transitions of the systems of neodymium, holmium and erbium complexes with norfloxacin in presence of cetylpyridinium chloride were studied by normal and derivative spectra. The absorption bands found normally at 575 nm for neodymium, 450 nm for holmium and 523 nm for erbium were enhanced markedly. Using the second derivative spectrum, Beer’s Law is obeyed from 5.0 × 10^–5∼ 2.5 × 10^–4 mol dm^–3 for neodymium, holmium and erbium. The relative standard deviations are 1.0, 1.4 and 1.1% for 6.9 × 10^–5 mol dm^–3 of neodymium, 6.1 × 10^–5 mol dm^–3 of holmium and 6.0 × 10^–5 mol dm^–3 of erbium, respectively. A method for the direct determination of neodymium, holmium and erbium in mixtures of rare earth elements with good accuracy and selectivity, is described. Received: 18 December 1997 / Revised: 23 February 1998 / Accepted: 26 February 1998     

Determination of neodymium, holmium and erbium in mixed rare earths by norfloxacin

Norfloxacin (NFX) is proposed as reagent for the derivative spectrophotometric determination of neodymium, holmium and erbium in mixed rare earths. The absorption spectra of 4f electron transitions of the systems of neodymium, holmium and erbium complexes with norfloxacin in presence of cetylpyridinium chloride were studied by normal and derivative spectra. The absorption bands found normally at 575 nm for neodymium, 450 nm for holmium and 523 nm for erbium were enhanced markedly. Using the second derivative spectrum, Beer’s Law is obeyed from 5.0 × 10^–5∼ 2.5 × 10^–4 mol dm^–3 for neodymium, holmium and erbium. The relative standard deviations are 1.0, 1.4 and 1.1% for 6.9 × 10^–5 mol dm^–3 of neodymium, 6.1 × 10^–5 mol dm^–3 of holmium and 6.0 × 10^–5 mol dm^–3 of erbium, respectively. A method for the direct determination of neodymium, holmium and erbium in mixtures of rare earth elements with good accuracy and selectivity, is described. Received: 18 December 1997 / Revised: 23 February 1998 / Accepted: 26 February 1998     

Fourth-derivative spectrophotometric determination of neodymium in mixed rare earths with methyl thymol blue and cetylpyridinium chloride

A sensitive and selective method is described for the determination of neodymium in mixed rare earths using fourth-derivative spectrophotometry. The method is based on the absorption spectra of 4f electron transitions of the complex of neodymium with methyl thymol blue and cetylpyridinium chloride. The influence of various instrumental parameters and reaction conditions for maximum colour development are investigated. The calibration curve is linear over the range 0–3.5 g ml^–1 neodymium. The relative standard deviation for determination of 1.4 g ml^–1 neodymium (n = 7) is 1.6%. The detection limit (signal-to-noise ratio = 3) is 0.2 g ml^–1.     

稀土高氯酸溶液导数光谱的研究及其在分析中的应用 Ⅶ.四阶导数分光光度法直接测定混合稀土氧化物中镱和镝

本文在近红外光区研究了镱(Ⅲ)和镝(Ⅲ)1mol/L HClO_4溶液的四阶导数吸收光谱,认真选择了仪器操作条件,提高了测定镱和镝的选择性。通过校正系数法,使镱的光度法测定成为可能,克服了在可见光区测定镝需要校正干扰的缺点,达到在混合稀土中直接测定镱和镝的目的。     

Spectrophotometric and second-derivative spectrophotometric determination of mercury in organomercurials by means of benzyl 2-pyridyl ketone 2-quinolylhydrazone

Mercury(II) reacts with benzyl 2-pyridylketone 2-quinolylhydrazone (BPKQH) in the pH range 9.0-10.4, to form a stable 1:2 (metal:ligand) complex which has a sharp absorption maximum at 475 nm and molar absorptivity 5.01 x 10(4) 1.mole(-1).cm(-1). It is proposed for use in spectrophotometric determination of mercury at microg/ml levels and analysis for organomercurials. The sensitivity of the method can be increased significantly by employing derivative spectrophotometry, making mercury determination at ng ml levels feasible.     

Dynamic ion-exchange chromatography with post-column reaction detection for the determination of the rare earth elements in monazites

Summary Separation and determination of lanthanum, cerium, praseodymium, neodymium and samarium in monazites have been achieved by dynamic ion-exchange chromatography. The ore samples are decomposed by sulfuric acid and the rare earths are separated in a group as oxalates. The rare earth elements are then separated from each other on a column of bonded phase silica by gradient elution with 0.05 to 0.5 M lactic acid (pH 3.5) in the presence of 0.01 M sodium 1-octanesulfonate. Post-column reaction with Arsenazo III is used for detection and quantification of the individual rare earth elements. Results are quoted for lanthanum, cerium, praseodymium, neodymium and samarium in monazites. Detection limit is 1 μg ml⁻¹ with a S/N ratio of 3. The separation is complete within 27 min valley to valley resolution. Precision of better than 1% can usually be obtained.     

环丙沙星－锰络合吸附波的研究

环丙沙星－锰络合吸附波的研究①张加玲樊惠芝潘景浩＊（山西大学化学系,太原０３０００６）环丙沙星（ｃｉｐｒｏｆｌｏｘａｃｉｎ简写ＣＰＦＸ）是新一代氟喹诺酮类抗菌药物之一,它的抗菌力强、抗菌谱宽,临床应用非常广泛．关于氟喹诺酮类抗菌药物与抗酸剂、维生素类...     

Spectrofluorometric determination of trace amounts of terbium with 4-chlorosalicylic acid, EDTA, and cetyltrimethylammonium bromide.

The quadruple complex formed by terbium with 4-chlorosalicylic acid (CSA), EDTA and cetyltrimethylammonium bromide (CTMAB) has been used for the sensitive spectrofluorometric determination of terbium in mixed rare earths. The effect of the experimental conditions on the fluorescence intensity was defined. Under the optimum conditions selected, the fluorescence intensity was linear with the terbium concentration in the range of 3.0 x 10(-8)-1.0 x 10(-5) mol/L with a detection limit of 8.0 x 10(-9) mol/L (S/N = 3). It has been satisfactory for the determination of terbium in mixed rare earths with good recovery.     

Pre-concentration of rare earths using silica gel loaded with 1-(2-pyridylazo)-2-naphthol (PAN) and determination by energy dispersive X-ray fluorescence

The determination of a single rare earth element in a mixture with other species of this family is a very challenging problem in analytical chemistry due to the close similarity of their chemical properties. In this work, a liquid–solid extraction procedure for praseodymium, neodymium, samarium and yttrium mixtures and subsequent determination by energy dispersive X-ray fluorescence spectrometry is described. The pre-concentration procedure, which involves the use of silica modified with 1-(2-pyridylazo)-2-naphthol, permits complete recovery of the rare earths and significant sensitivity enhancement in comparison with direct determination in the aqueous phase. Determinations in quaternary mixtures show typical precisions and accuracies of 3% and 5%, respectively.     

Spectrophotometric determination of cerium subgroup rare earths in nickel-base alloys in the presence of yttrium with p-acetylchlorophosphonazo and mixed surfactants

Rare earth elements react with p-acetylchlorophosphonazo (CPApA) to form colour complexes. In the presence of emulsifier OP and cetylpyridinium chloride (CPC), the yttrium complex is not formed because of micellar masking, while the cerium subgroup rare earths give more sensitive reactions with CPApA(epsilon(Ce) = 1.16 x 10(5) 1 . mol(-1) . cm(-1)) due to micellar sensitization. Most foreign ions can be tolerated in considerable amounts. The optimum conditions of the complex formation reaction and the composition of the Ce-CPApA complex are described. A simple method is proposed for the determination of cerium subgroup rare earths in nickel-base alloys with satisfactory results.     

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one as an analytical reagent for micro determination of molybdenum(VI).

6-Chloro-3-hydroxy-2-(5'-methylfuryl)-4H-chromene-4-one (CHMFC) has been used as an analytical reagent for the spectrophotometric determination of molybdenum. Molybdenum(VI) in the presence of several cations, anions and complexing agents forms a yellow 1:2 complex with CHMFC. The complex is quantitatively extractable into 1,2-dichloroethane from 1 mol dm(-3) acetic acid medium and is stable for more than 6 h. The complex shows an absorption maximum at 438 nm with a molar absorptivity of 5.36 x 10(4) dm3 mol(-1) cm(-1) and Sandell's sensitivity equal to 0.0017 microg Mo cm(-2). The method obeys Beer's law up to 1.9 microg Mo ml(-1). The relative standard deviations are 0.2% for solutions and 0.5-1.5% for solid samples. The method is simple, selective, precise and rapid, and has been satisfactorily applied to the micro determination of molybdenum in various synthetic and standard samples.     

A rapid and sensitive extractive spectrophotometric determination of copper(II) in pharmaceutical and environmental samples using benzildithiosemicarbazone.

Benzildithiosemicarbazone (BDTSC) is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of copper(II). BDTSC reacts with copper(II) in the pH range 1.0-7.0 to form a yellowish complex. Beer's law is obeyed in the concentration range 0.5-0.4 microg cm(-3). The yellowish Cu(II)-BDTSC complex in chloroform shows a maximum absorbance at 380 nm, with molar absorptivity and Sandell's sensitivity values of 1.63 x 10(4) dm3 mol(-1) cm(-1) and 0.00389 microg cm(-2), respectively. A repetition of the method is checked by finding the relative standard deviation (RSD) (n = 10), which is 0.6%. The composition of the Cu(II)-BDTSC complex is established as 1:1 by slope analysis, molar ratio and Asmus' methods. An excellent linearity with a correlation coefficient value of 0.98 is obtained for the Cu(II)-BDTSC complex. The instability constant of the complex calculated from Edmond and Birnbaum's method is 7.70 x 10(-4) and that of Asmus' method is 7.66 x 10(-4), at room temperature. The method is successfully employed for the determination copper(II) in pharmaceutical and environmental samples. The reliability of the method is assured by analyzing the standard alloys (BCS 5g, 10g, 19e, 78, 32a, 207 and 179) and by inter-comparison of experimental values, using an atomic absorption spectrometer.     

Spectrophotometric determination of trace amount of copper(II) ion based on complexation with an anthraquinone derivative.

The spectrophotometric determination of Cu(II) with an anthraquinone derivative (Alizarin Red S) has been investigated. The experimental conditions, such as the pH of the sample and concentration of ligand, were optimized. This method is simple and sensitive for determination of Cu(II) ion. The interfering effects of diverse ions were investigated. Copper ion was determined by measuring the absorbance of the Cu(II)-ARS complex at 510 nm. Beer's law was obeyed over the concentration range of 0.011 - 0.320 mmol dm(-3) and the detection limit (S/N = 3) was 0.038 microg cm(-3). The relative standard deviation at 20 microg cm(-3) was 1.02% (n = 5). The method was applied for real samples.     

Spectrophotometric and atomic absorption determination of ramipril, enalapril maleate and fosinopril through ternary complex formation with molybdenum (V)-thiocyanate (Mo(V)-SCN)

Three different sensitive and accurate spectroscopic procedures were developed for the determination of three angiotensin-converting enzyme inhibitors, namely, ramipril, enalapril maleate and fosinopril. The first two spectrophotometric (extractive and non-extractive) procedures were based on ternary complex formation with molybdenum(V) thiocyanate. The formed complex can be determined by extraction with chloroform measured at lambdamax 517 nm Beer's law was obeyed in the concentration range from (10--90 microg ml(-1)) for ramipril and fosinopril and (4--36 microg ml(-1)) for enalapril maleate with molar absorptivity 1.2x10(4), 2x10(4) and 3.4x10(4) l mol(-1) cm(-1), respectively, or by direct measurement after addition of benzalkonium chloride as surfactant and measuring the formed ternary complex at lambdamax 545 nm with a linear relationship in the concentration range from (8-7-2 microg ml(-1)), (3--27 microg ml(-1)) and (8--72 microg ml(-1)) for ramipril, enalapril maleate and fosinopril with molar absorptivity 1.5x10(4), 5x10(4) and 2.1x10(4) l mol(-1) cm(-1), respectively. The third procedure is atomic absorption measurement through the quantitative determination of molybdenum content of the complex. These methods hold their accuracy and precision well when applied to the determination of ramipril, enalapril maleate and fosinopril in their dosage forms.     

Simultaneous determination of gallium and indium with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in cationic micellar medium using derivative spectrophotometry.

A new derivative spectrophotometric method for rapid and selective trace analysis of Ga3+ and In3+ and for their simultaneous determination using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in a cationic micellar medium is reported. Molar absorptivity and Sandell's sensitivity of 1:1 Ga+ and In3+ complexes at their lambda(max) 553 nm and 558 nm are: 7.22 x 10(4) l mol(-1) cm(-1) and 5.85 x 10(4) l mol(-1) cm(-1), and 0.96 ng cm(-2) and 1.96 ng cm(-2), respectively. Linearity is observed in the concentration range 0.023-0.700 microg ml(-1) for gallium and 0.076-1.52 microg ml(-1) for indium; IUPAC detection limit is 0.012 and 0.035 ng ml(-1), respectively. These metal ions interfere with the determination of each other. However, 0.07-0.70 microg ml(-1) Ga3+ and 0.115-1.150 microg ml(-1) In3+ could be determined simultaneously when present together by the derivative method without any prior separation. The proposed procedures have been successfully applied for the individual and simultaneous determination of gallium and indium in synthetic binary mixtures, standard reference materials and environmental samples.     

A new selective chromogenic reagent for the spectrophotometric determination of thallium(I) and (III) and its separation using flotation and the solid-phase extraction on polyurethane foam.

A new sensitive chromogenic reagent, 9,10-phenanthaquinone monoethylthiosemicarbazone (PET), has been synthesized and used in the spectrophotometric determination of Tl(III). In HNO3, H2SO4 or H3PO4 acids, PET can react immediately at room temperature with Tl(III) to form a red 2:1 complex with a maximum absorption at 516 nm. The different analytical parameters affecting the extraction and determination processes have been examined. The calibration curve was found to be linear over the range 0.2-10 microg cm(-3) with a molar absorptivity of 2.2 x 10(4) dm3 mol(-1) cm(-1). Sandell's sensitivity was found to be 0.0093 microg cm(-2). No interference from macroamounts of foreign ions was detected, except for Pd(II). However, Pd(II) does not affect the determination process, because its complex with PET has its lambda(max) at 625 nm. The proposed method has been applied to the determination of Tl(I and III) in synthetic and natural samples after separation by flotation (in oleic acid/kerosene) and solid-phase extraction (on polyurethane foam) techniques. The two methods were found to be accurate and not subject to random error, but solid-phase extraction was preferred because it is cheap, simpler and there is no contamination risk coming from flotation reagents.