Facile synthesis of thick ordered mesoporous TiO2 film for dye-sensitized solar cell use

Crack-free thick ordered mesoporous TiO₂ films with excellent optical quality have been synthesized by combination of “Doctor Blade” technique and a two-step evaporation induced self-assembly (EISA) method. By employing the as-synthesized mesoporous film with the thickness of 7 μm as the photoanode in dye-sensitized solar cell (DSC), a solar conversion efficiency of 6.53% has been obtained at 30 mW cm⁻² light intensity.     

Facile preparation of large aspect ratio ellipsoidal anatase TiO2 nanoparticles and their application to dye-sensitized solar cell

A simple one-step heat-treatment of peroxotitanate complex aqueous solution at around 100 °C was resulted in the formation of ellipsoidal anatase TiO₂ nanoparticles having a high aspect ratio with no branches. The length of these ellipsoidal TiO₂ falls in the range of 200–350 nm, depending on mole ratio of Ti⁴⁺/H₂O₂. Dye-sensitized solar cell based on these ellipsoidal nanocrystalline TiO₂ as photoanode was fabricated and characterized.     

Electrophoretic deposition of ZnO photoanode for plastic dye-sensitized solar cells

Plastic dye-sensitized solar cells have been fabricated based on an organic dye (D 149) and ZnO photoanode prepared via room temperature electrophoretic deposition (EPD) to yield a conversion efficiency of 4.17% under 100 mW cm^?2 AM 1.5 illumination. Intensity modulated photocurrent spectroscopy analyses reveal that the fabricated ZnO electrodes have adequate interparticle connection, even in the absence of any post-treatment. This study demonstrates that EPD is a convenient method for photoanode fabrication and ZnO photoelectrodes obtained via EPD are promising for efficient plastic solar cells.     

Formation and characterization of magnetic barium ferrite hollow fibers with high specific surface area via sol–gel process

The magnetic barium ferrite (BaFe₁₂O₁₉) hollow fibers with a high specific surface area about 22–38 m² g^?1, diameters around 1 μm and a ratio of the hollow diameter to the fiber diameter estimated about 1/2–2/3 have been prepared by the gel-precursor transformation process. The precursor and resulting ferrite hollow fibers were analyzed by thermo-gravimetric and differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy and X-ray diffraction. The specific surface area was measured by the Brunauer–Emmett–Teller method. The gel formed at pH 5.5 has a good spinnability. A pure barium ferrite phase is formed after calcined at 750 °C for 2 h and fabricated of nanograins about 38 nm with a hexagonal plate-like morphology, which are increased to about 72 nm with the calcination temperature increased up to 1050 °C. The barium ferrite hollow fibers obtained at 750 °C for 2 h have a specific surface area 38.1 m² g^?1 and average pore size 6.5 nm and then the specific surface area and average pore size show a reduction tendency with the calcination temperature increasing from 750 to 1050 °C owing to the particle growth and fiber densification. These barium ferrite hollow fibers exhibit typical hard-magnetic materials characteristics and the formation mechanism for hollow structures is discussed.     

Size-controllable synthesis of spherical ZnO nanoparticles: Size- and concentration-dependent resonant light scattering

A new and simple direct precipitation method assisted with ultrasonic agitation was proposed for the preparation of spherical ZnO nanoparticles. The size of the ZnO nanoparticles, 10 nm to 85 nm, was tuned through controlling the calcination temperature and changing the ratio of the reactants. The resonant light scattering (RLS) of the ZnO nanoparticles dispersed/suspended in aqueous solution of Triton X-100 was studied under room temperature. It was found that the ZnO nanoparticles of different size or concentration all have a characteristic RLS peak at 387 nm. Under optimal conditions, the RLS intensity was proportional to the ZnO concentration in the range of 7.3 × 10^?8–1 × 10^?4 mol L^?1, while the cubic root of the RLS intensity was found to be proportional to the size of ZnO nanoparticles. Further, the quantitative relationship of the size of the ZnO nanoparticles versus the calcination temperature was derived, and this could be used to forecast/control the nano-size in the nano-ZnO preparation.     

Simultaneous growth of rutile TiO2 as 1D/3D nanorod/nanoflower on FTO in one-step process enhances electrochemical response of photoanode in DSSC

Simultaneous growth of 1D/3D-nanorod/nanoflower like structures of TiO₂ on fluorine doped tin oxide (FTO) glass substrates has been achieved in one-step hydrothermal process. X-ray diffraction (XRD) pattern confirms the formation of rutile phase whereas enhanced light scattering in 1D/3D nanorod/nanoflower TiO₂ photoanode was observed at longer wavelengths of 600–750 nm. Dye sensitized solar cell (DSSC) prepared with 1D/3D-nanorod/nanoflower structures had about 90% increases in efficiency as compared to 1D nanorod like structure. Thus, simultaneous assembly of TiO₂ as 1D/3D-nanorod/nanoflower like structure without significant change in their surface oxidation states (Ti^3 + and Ti^4 +) had better capabilities for light harvesting and efficient electron transportation for improving electrochemical responses of photo-electrode in DSSC to achieve higher sensitivity.     

Ag2S quantum dot-sensitized solar cells

We present a new photosensitizer – Ag₂S quantum dots (QDs) – for solar cells. The QDs were grown by the successive ionic layer adsorption and reaction deposition method. The assembled Ag₂S-QD solar cells yield a best power conversion efficiency of 1.70% and a short-circuit current of 1.54 mA/cm² under 10.8% sun. The solar cells have a maximal external quantum efficiency (EQE) of 50% at λ = 530 nm and an average EQE of ～ 42% over the spectral range of 400–1000 nm. The effective photovoltaic range covers the visible and near-infrared spectral regions and is ～ 2–4 times broader than that of the cadmium chalcogenide systems — CdS and CdSe. The results show that Ag₂S QDs can be used as a highly efficient and broadband sensitizer for solar cells.     

Highly ordered anodized Nb2O5 nanochannels for dye-sensitized solar cells

Highly ordered anodized Nb₂O₅ nanochannels are synthesized and utilized as the photoanodes for dye-sensitized solar cells (DSSCs). We characterize these DSSCs to determine the optimum photoanode thickness for the best cell performance. The samples with thicknesses from 5 to 25 μm are obtained in glycerol based electrolyte at 180 °C and their photoconversion properties are investigated utilizing various techniques including photocurrent–voltage characteristic, photovoltage decay and electrochemical impedance spectroscopy. Overall, the DSSC incorporating a 10 μm thick Nb₂O₅ photoanode shows the highest efficiency of 4.48%. We analyze the factors that limit the efficiency of DSSCs.     

A novel deep eutectic solvent-based ionic liquid used as electrolyte for dye-sensitized solar cells

We utilize a quaternary ammonium salt-derivative ionic liquid called G.CI which is a eutectic mixture of glycerol and choline iodide as electrolyte for dye-sensitized solar cells. Such eutectic compound belongs to a new series of ionic liquid called deep eutectic solvents (DES), which possess many outstanding features compared to the traditional imidazolium-based ionic liquids including cheap raw materials, simple preparation procedures and better biocompatibility. Current–voltage characteristics of the G.CI/PMII-based binary electrolytes stand at 0.533 V on V_oc, 12.0 mA cm^?2 on J_sc, 0.582 on fill factor, and 3.88% cell efficiency under AM 1.5, 100 mW/cm² illuminations. The comparable cell performance together with all the above advantages makes G.CI as a strong candidate for future electrolyte development for dye-sensitized solar cells (DSSCs).     

Synthesis of triphenylamine-based thiophene-(N-aryl)pyrrole-thiophene dyes for dye-sensitized solar cell applications

Two new triphenylamine-based metal-free organic dyes (TPTDYE-1 and TPTDYE-2) containing 1-(2,6-diisopropylphenyl)-2,5-di(2-thienyl)pyrrole as a new π-conjugated chromophore were synthesized for dye-sensitized solar cell (DSSC) applications. TPTDYE-1 containing three donor groups around the acceptor group was found to show relatively narrow absorption band from 300 nm to 470 nm while TPTDYE-2 having extended π–π delocalization between the donor and acceptor group showed broad absorption band from 300 nm to 550 nm. The electrochemical studies indicate that the HOMO–LUMO energy gap of TPTDYE-1 is considerably wider than that of TPTDYE-2. The dye-sensitized solar cell performance of each dye was investigated, and the TPTDYE-2-sensitized cell was found to show a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 75%, a short-circuit photocurrent density (J_sc) of 13.50 mA/cm², an open-circuit voltage (V_oc) of 0.72 V, and a fill factor (FF) of 0.69, corresponding to an overall conversion efficiency of 6.71% under simulated AM 1.5 irradiation (100 mW/cm²). Under the same condition the TPTDYE-1-sensitized cell showed the same IPCE value of 75% with a promising conversion efficiency of 6.00%, a J_sc of 11.11 mA/cm², a V_oc of 0.76 V, and a FF of 0.71.     

AgSbS2 semiconductor-sensitized solar cells

We present a ternary semiconductor nanoparticle sensitizer – AgSbS₂ – for solar cells. AgSbS₂ nanoparticles were grown using a two-stage successive ionic layer adsorption and reaction process. First, Ag₂S nanoparticles were grown on the surface of a nanoporous TiO₂ electrode. Secondly, a Sb–S film was coated on top of the Ag₂S. The double-layered structure was transformed into AgSbS₂ nanoparticles ~ 40 nm in diameter, after post-deposition heating at 350 °C. The AgSbS₂-sensitized TiO₂ electrodes were fabricated into liquid-junction solar cells. The best cell yielded a power conversion efficiency of 0.34% at 1 sun and 0.42% at 0.1 sun. The external quantum efficiency (EQE) spectrum covered the range of 380–680 nm with a maximal EQE of 10.5% at λ = 470 nm. The method can be applied to grow other systems of ternary semiconductor nanoparticles for solar absorbers.     

Responses of a marine red tide alga Skeletonema costatum (Bacillariophyceae) to long-term UV radiation exposures

UV radiation (280–400 nm) is known to affect phytoplankton in negative, neutral and positive ways depending on the species or levels of irradiation energy. However, little has been documented on how photosynthetic physiology and growth of red tide alga respond to UVR in a long-term period. We exposed the cells of the marine red tide diatom Skeletonema costatum for 6 days to simulated solar radiations with UV-A (320–400 nm) or UV-A + UV-B (295–400 nm) and examined their changes in photosynthesis and growth. Presence of UV-B continuously reduced the effective photosynthetic quantum yield of PSII, and resulted in complete growth inhibition and death of cells. When UV-B or UV-B + UV-A was screened off, the growth rate decreased initially but regained thereafter. UV-absorbing compounds and carotenoids increased in response to the exposures with UVR. However, mechanisms for photoprotection associated with the increased carotenoids or UV-absorbing compounds were not adequate under the continuous exposure to a constant level of UV-B (0.09 W m^?2, DNA-weighted). In contrast, under solar radiation screened off UV-B, the photoprotection was first accomplished by an initial increase of carotenoids and a later increase in UV-absorbing compounds. The overall response of this red tide alga to prolonged UV exposures indicates that S. costatum is a UV-B-sensitive species and increased UV-B irradiance would influence the formation of its blooms.     

Dye-sensitized solar cells using anodic TiO2 mesosponge: Improved efficiency by TiCl4 treatment

In the present work, we produce 15 μm thick titania mesosponge layers (TMSL) by a Ti anodization/etching process and use the layers in dye-sensitized solar cells (DSCs). We show that the solar cell efficiency can considerably be improved by a TiCl₄ hydrolysis treatment (increase of approx. 40% to an overall value of 4.9% under AM 1.5 illumination). This beneficial effect is due to the decoration of the ～10 nm wide channels present in TMSL with TiO₂ nanoparticles of approx. 3 nm diameter, which allow for a significantly higher specific dye loading of the TMS structure.     

Influence of chromophore dipole moments in parameterts of organic light emitting devices based on phenyl and methyl modified pyrazoloquinoline

Absorption, photo- and electroluminescence spectra of some trityl substituted 1H-pyrazolo[3,4-b]quinolines derivatives (methyl- and phenyl substituted) and fabrication of the single layered organic light emitting diodes are reported. The bulky trityl substituent was introduced to prevent aggregation and crystallization of the dopant in polymer matrix. Role of ground state dipole moments in the observed red Stokes shift, electroluminescent features and photocarrier transport is explored. The maximally achieved brightness about 50 Cd/m² is observed in the spectral range extending from 443 nm up to 462 nm. The voltage threshold was varied from 7.8 V up to 10 V. The brightness-current dependences show an existence of at least two types of carrier injections.     

Chemical bath deposition of CdS quantum dots on vertically aligned ZnO nanorods for quantum dots-sensitized solar cells

Formation of CdS quantum dots (Q dots) on the vertically aligned ZnO nanorods electrode was carried out by chemical bath deposition. The diameter and thickness of ZnO nanorods are ～100–150 nm and ～1.6 μm, respectively, and CdS Q dots on ZnO nanorods have a diameter of smaller than 15 nm. In application of the Q dots-sensitized solar cells, composite film exhibited a power conversion efficiency of 0.54% under air mass 1.5 condition (80 mW/cm²), and incident-photon-to-current conversion efficiency showed 18.6%.     

Spectral broadening in quantum dots-sensitized photoelectrochemical solar cells based on CdSe and Mg-doped CdSe nanocrystals

In order to absorb a broad spectrum in visible region, a co-sensitized TiO₂ electrode was prepared by CdSe and Mg-doped CdSe quantum dots (Q dots). The power conversion efficiency of the co-sensitized Q dots photoelectrochemical solar cells (PECs) showed 1.03% under air mass 1.5 condition (I = 100 mW/cm²), which is higher than that of individual Q dots-sensitized PECs. The incident-photon-to-current conversion efficiency of the co-sensitized PECs showed absorption peaks at 541 and 578 nm corresponding to the two Q dots and displayed a broad spectral response over the entire visible spectrum in the 500–600 nm wavelength domains.     

ZIF-8 derived nano-SnO2@ZnO as anode for Zn/Ni secondary batteries

SnO₂@ZnO was synthesized by a new method involving the immobilization of Sn onto zeolitic imidazolate framework-8 (ZIF-8) followed by calcination. The synthesized nanoparticles were characterized as 20–30 nm spherical ZnO particles uniformly dotted with SnO₂. When SnO₂@ZnO were used as anode material for Zn/Ni batteries, the average specific capacity was approximately 600 mAh g^− 1 and remained stable after 150 cycles at a rate of 1 C.     

Contrasting effects of solar radiation and nitrates on the bioavailability of dissolved organic matter to marine bacteria

We evaluated the role of nitrate (NO₃^?) as a potential photosensitizer and the bacterial responses to dissolved organic matter (DOM) phototransformation from coastal waters in the northwestern Mediterranean Sea. In spring, without any addition of NO₃^?, the exposure of 0.2 μm filtered seawater (DOM-solution) to natural solar radiation (i.e. Full Sun [FS], including photosynthetically available [PAR: 400–700 nm], ultraviolet-A [UVAR: 315–400 nm] and ultraviolet-B [UVBR: 280–315 nm] radiations) stimulated bacterial production (BP) and abundance (BA) in natural assemblages (0.8 μm filtered seawater) by 80 and 20% as compared to unexposed (Dark) DOM-solutions, respectively. This stimulation resulted primarily from the exposure to PAR. When NO₃^? (30 μM) was added to DOM-solution before irradiation, BP and BA increased by 150 and 65% in FS compared to Dark, respectively, due to both PAR and UVBR. By contrast, in summer, the exposure of DOM-solution caused a decrease in BP by 30% but an increase in BA by 23% in FS compared to Dark, regardless of the NO₃^? addition before irradiation. The inhibition of BP resulted mainly from UVAR, whereas the stimulation of BA resulted from PAR. These results suggest contrasting effects along seasons of solar radiation and NO₃^? on DOM bioavailability, depending on its initial chemical composition.     

Fabrication and magnetic properties of electrospun copper ferrite (CuFe2O4) nanofibers

Tetragonal copper ferrite (CuFe₂O₄) nanofibers were fabricated by electrospinning method using a solution that contained poly(vinyl pyrrolidone) (PVP) and Cu and Fe nitrates as alternative metal sources. The as-spun and calcined CuFe₂O₄/PVP composite samples were characterized by TG-DTA, X-ray diffraction, FT-IR, and SEM, respectively. After calcination of the as-spun CuFe₂O₄/PVP composite nanofibers (fiber size of 89 ± 12 nm in diameter) at 500 °C in air for 2 h, CuFe₂O₄ nanofibers of 66 ± 13 nm in diameter having well-developed tetragonal structure were successfully obtained. The crystal structure and morphology of the nanofibers were influenced by the calcination temperature. After calcination at 600 and 700 °C, the nature of nanofibers changed which was possibly due to the reorganization of the CuFe₂O₄ structure at high temperature, and a fiber structure of packed particles or crystallites was prominent. Crystallite size of the nanoparticles contained in nanofibers increases from 7.9 to 23.98 nm with increasing calcination temperature between 500 and 700 °C. Room temperature magnetization results showed a ferromagnetic behavior of the calcined CuFe₂O₄ samples, having their specific saturation magnetization (M_s) values of 17.73, 20.52, and 23.98 emu/g for the samples calcined at 500, 600, and 700 °C, respectively.     

Amphiphilic ruthenium dye as an ideal sensitizer in conversion of light to electricity using ionic liquid crystal electrolyte

The optimization of interfacial charge transfer between the dye and the electrolyte is crucial to the design of dye-sensitized solar cells. In this paper, we address the combined use of an ionic liquid crystal electrolyte and amphiphilic ruthenium dyes in dye-sensitized solar cells. The solar cell with an amphiphilic ruthenium dye [Ru(H₂dcbpy)(tdbpy)(NCS)2] (H₂dcbpy = 4,4′-dicarboxy-2,2′-bipyridine, tdbpy = 4,4′-tridecyl-2,2′-bipyridine), exhibited a short-circuit photocurrent density of 9.1 mA/cm², an open-circuit voltage of 665 mV and a fill factor of 0.58, corresponding to an overall conversion efficiency of 3.51%. We find that increasing dye alkyl chain length to octadecyl from tridecyl results in lower short-circuit photocurrent density and open-circuit voltage, and the suitable dyes for ionic liquid crystal electrolyte differed completely from those used in liquid and ionic liquid electrolyte cells.