Theoretical study of the adsorption of ethylene on alkali‐exchanged zeolites

The structures of alkali‐exchanged faujasite (X–FAU, X = Li⁺ or Na⁺ ion) and ZSM‐5 (Li–ZSM‐5) zeolites and their interactions with ethylene have been investigated by means of quantum cluster and embedded cluster approaches at the B3LYP/6‐31G(d, p) level of theory. Inclusion of the Madelung potential from the zeolite framework has a significant effect on the structure and interaction energies of the adsorption complexes and leads to differentiation of different types of zeolites (ZSM‐5 and FAU) that cannot be drawn from a typical quantum cluster model, H₃SiO(X)Al(OH)₂OSiH₃. The Li–ZSM‐5 zeolite is predicted to have a higher Lewis acidity and thus higher ethylene adsorption energy than the Li–FAU zeolites (16.4 vs. 14.4 kcal/mol), in good agreement with the known acidity trend of these two zeolites. On the other hand, the cluster models give virtually the same adsorption energies for both zeolite complexes (8.9 vs. 9.1 kcal/mol). For the larger cation‐exchanged Na–FAU complex, the adsorption energy (11.6 kcal/mol) is predicted to be lower than that of Li–FAU zeolites, which compares well with the experimental estimate of about 9.6 kcal/mol for ethylene adsorption on a less acidic Na–X zeolite. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 333–340, 2003     

Investigation and Modeling of the Hydrothermal Stability of Technically Relevant Zeolites

The dense-structured zeolites of types ZSM-5 (MFI) and mordenite (MOR) of different SiO₂/Al₂O₃ moduli are relatively stable under treatment by liquid water for 72 hours up to 513 K. The open-structured zeolites of types Y in dealuminated modification (FAU) and beta (BEA) undergo strong decomposition in the same range. For these two sample types a mathematical model for the decomposition of the zeolite framework is established that takes into account the influence of modulus as well as temperature. Here the kinetic of the solid phase reaction is a superposition of two different mechanisms described by the Monod equation. Dedicated to the late of Wolfgang Schirmer.     

载银sod基纳米分子筛的合成及抗菌性能

采用两步法合成了 sod 基系列分子筛(EMT、FAU、SOD),并通过离子交换法引入 Ag⁺得到载银分子筛,通过 X 射线衍射(XRD)、扫描电子显微镜(SEM)证明离子交换前后分子筛骨架结构和晶粒尺寸没有发生明显变化;通过红外光谱(IR)、热重(TG)证明制得的载银分子筛具有良好的稳定性;对获得的载银分子筛进行了Ag⁺释放实验与抗菌能力测试,考察了分子筛种类和晶粒尺寸对抗菌性能的影响。结果表明具有笼状结构的FAU与EMT分子筛因可储存更多的Ag⁺而具有更好的抗菌性能,而具有超笼结构的 FAU 分子筛抗菌性能最优。通过对比不同晶粒尺寸载银 FAU 分子筛抗菌数据发现,晶粒尺寸为 100 nm 的载银FAU分子筛因外表面丰富的抗菌活性位点以及其内部可以储存并不断释放 Ag⁺而具有最优的抗菌性能和抗菌寿命。而晶粒尺寸为10 nm的载银FAU分子筛由于晶粒尺寸较小、外比表面积大、扩散路径短,Ag⁺的释放速率最快,抗菌效率最高。     

载银sod基纳米分子筛的合成及抗菌性能

采用两步法合成了sod基系列分子筛(EMT、FAU、SOD),并通过离子交换法引入Ag⁺得到载银分子筛,通过X射线衍射(XRD)、扫描电子显微镜(SEM)证明离子交换前后分子筛骨架结构和晶粒尺寸没有发生明显变化;通过红外光谱(IR)、热重(TG)证明制得的载银分子筛具有良好的稳定性;对获得的载银分子筛进行了Ag⁺释放实验与抗菌能力测试,考察了分子筛种类和晶粒尺寸对抗菌性能的影响。结果表明具有笼状结构的FAU与EMT分子筛因可储存更多的Ag⁺而具有更好的抗菌性能,而具有超笼结构的FAU分子筛抗菌性能最优。通过对比不同晶粒尺寸载银FAU分子筛抗菌数据发现,晶粒尺寸为100 nm的载银FAU分子筛因外表面丰富的抗菌活性位点以及其内部可以储存并不断释放Ag⁺而具有最优的抗菌性能和抗菌寿命。而晶粒尺寸为10 nm的载银FAU分子筛由于晶粒尺寸较小、外比表面积大、扩散路径短,Ag⁺的释放速率最快,抗菌效率最高。     

Thermal behavior of multiwall carbon nanotube/zeolite nanocomposites

Summary In this study we report the synthesis and thermal characterization of multiwall carbon nanotubes containing zeolite based nanocomposites. Three different zeolites (LTA, FAU and MFI) were used in this study and it was observed that the morphologies of the synthesized nanocomposites were significantly different. For FAU zeolite nanocrystals with a few nm in diameter were nucleated on the nanotubes covering their surface, however, for LTA and MFI zeolites bulky crystals with nanotubes crossing them were observed by transmission electron microscopy. One of the most important results of our study was the generation of secondary mesoporosity in the zeolites after removing the carbon nanotubes.     

Control of Surface Plasmon Resonance of Au/SnO2 by Modification with Ag and Cu for Photoinduced Reactions under Visible‐Light Irradiation over a Wide Range

Gold particles supported on tin(IV) oxide (0.2 wt % Au/SnO₂) were modified with copper and silver by the multistep photodeposition method. Absorption around λ=550 nm, attributed to surface plasmon resonance (SPR) of Au, gradually shifted to longer wavelengths on modification with Cu and finally reached λ=620 nm at 0.8 wt % Cu. On the other hand, the absorption shifted to shorter wavelength with increasing amount of Ag and reached λ=450 nm at 0.8 wt % Ag. These Cu‐ and Ag‐modified 0.2 wt % Au/SnO₂ materials (Cu‐Au/SnO₂ and Ag‐Au/SnO₂) and 1.0 wt % Au/SnO₂ were used for mineralization of formic acid to carbon dioxide in aqueous suspension under irradiation with visible light from a xenon lamp and three kinds of light‐emitting diodes with different wavelengths. The reaction rates for the mineralization of formic acid over these materials depend on the wavelength of light. Apparent quantum efficiencies of Cu‐Au/SnO₂, Au/SnO₂, and Ag‐Au/SnO₂ reached 5.5 % at 625 nm, 5.8 % at 525 nm, and 5.1 % at 450 nm, respectively. These photocatalysts can also be used for selective oxidation of alcohols to corresponding carbonyl compounds in aqueous solution under visible‐light irradiation. Broad responses to visible light in formic acid mineralization and selective alcohol oxidation were achieved when the three materials were used simultaneously.     

Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

Polymer‐Templated Formation of Polydopamine‐Coated SnO2 Nanocrystals: Anodes for Cyclable Lithium‐Ion Batteries

Well‐controlled nanostructures and a high fraction of Sn/Li₂O interface are critical to enhance the coulombic efficiency and cyclic performance of SnO₂‐based electrodes for lithium‐ion batteries (LIBs). Polydopamine (PDA)‐coated SnO₂ nanocrystals, composed of hundreds of PDA‐coated “corn‐like” SnO₂ nanoparticles (diameter ca. 5 nm) decorated along a “cob”, addressed the irreversibility issue of SnO₂‐based electrodes. The PDA‐coated SnO₂ were crafted by capitalizing on rationally designed bottlebrush‐like hydroxypropyl cellulose‐graft‐poly (acrylic acid) (HPC‐g ‐PAA) as a template and was coated with PDA to construct a passivating solid‐electrolyte interphase (SEI) layer. In combination, the corn‐like nanostructure and the protective PDA coating contributed to a PDA‐coated SnO₂ electrode with excellent rate capability, superior long‐term stability over 300 cycles, and high Sn→SnO₂ reversibility.     

Quantum chemical investigation of the interaction of the Pt<Subscript>6</Subscript> cluster with oxides of different nature

The interaction of a Pt₆ nanoparticle with different oxide supports, viz., γ-Al₂O₃, FAU and MFI zeolites, was investigated using the density functional theory. The interaction with the basic oxygen anions of the lattice and with hydroxyl groups of the support affects the electronic structure of the metal particles. The transfer of H atoms of the hydroxyl groups to the metal particle suppresses the Brönsted acidity of the support, and the activation energy of proton transfer decreases with an increase in the acidity of the support. The potential energy profiles were calculated for the transfer processes, and changes in the electronic structures and charge distribution of the supported particles were outlined. The H atom transfer results in positive charging by the metal particles, whereas the interaction with basic sites leads to the appearance of electron-enriched metal clusters.     

One‐Dimensional Carbon Nanotube/SnO2/Noble Metal Nanoparticle Hybrid Nanostructure: Synthesis,Characterization, and Electrochemical Sensing

Herein we report a facile and efficient method for self‐assembling noble‐metal nanoparticles (NPs) to the surface of SnO₂‐coated carbon nanotubes (CNT@SnO₂) to construct CNT@SnO₂/noble metal NP hybrids. By using SnCl₄ as the precursor of the SnO₂ shell on the surface of CNTs, the hydrolysis speed of SnCl₄ was slowed down in ethanol containing a trace amount of urea and water. The coaxial nanostructure of CNT@SnO₂ was confirmed by using X‐ray powder diffraction (XRD) and transmission electron microscopy (TEM). It was found that the coating layer of SnO₂ was homogeneous with the mean thickness of 8 nm. The CNT@SnO₂/noble‐metal NP hybrids were obtained by mixing noble‐metal NPs with as‐prepared CNT@SnO₂ coaxial nanocables by means of a self‐assembly strategy. With the amino group terminated, the CNT@SnO₂ coaxial nanocable can readily adsorb the as‐prepared noble‐metal NPs (Au, Ag, Au? Pt, and Au? Pd NPs). The presence of an amino group at the surface of SnO₂ was proved by use of X‐ray photoelectron spectroscopy (XPS). In addition, H₂O₂ sensing by amperometric methods could serve as detection models for investigating the electrocatalytic ability of as‐prepared hybrid materials. It was found that wide linear ranges and low detection limits were obtained by using the enzyme‐free CNT@SnO₂@Au? Pt modified electrode, which indicated the potential utilizations of the hybrid based on CNT@SnO₂ for electrochemical sensing.     

单分散SnO2中空微纳米球的制备和性质

模板法是制备无机中空微纳米球的重要方法之一. 本文以苯乙烯为单体, 通过乳液聚合得到粒径约为620 nm的单分散聚苯乙烯(PS)微球. 以磺化后的聚苯乙烯(PSS)微球为模板, 利用阴阳离子静电吸附作用, 将PSS与前驱体SnSO₄中的Sn²⁺结合. 通过Sn²⁺在乙醇-水介质中的水解作用得到核-壳复合结构, 再经高温煅烧, 得到SnO₂中空微纳米球. 实验对前驱体的浓度、表面活性剂的用量、反应时间及模板选择等方面做了研究,通过扫描电镜(SEM)、X 射线衍射(XRD)、红外(IR) 光谱、热重分析(TGA)、H₂ 程序升温还原(H₂-TPR)、Brunauer-Emmett-Teller (BET)比表面积等技术深入探究SnO₂中空微纳米球的结构, 并对比中空SnO₂与实心粒子的氧化还原特性. BET和H₂-TPR显示将SnO₂制备成微纳米空心球后其比表面积增大, 表面氧空位明显增多, 氧化活性明显提高. 从IR 及XRD推断核-壳结构形成机理, 进而优化出简单合理的实验方案, 获得表面光滑、结构致密, 包覆厚度可控的SnO₂中空微纳米球.     

甲胺与MFI、FAU 及FER型高硅沸石的相互作用

The adsorption of methylamine on highly siliceous MFI, FAU and FER-type zeolites was investigated withXRD, FT-IR, Raman, ^13C and ^29Si MAS NMR, and compared with the adsorption of methanol. As the adsorption of the amine, the relative intensity of XRD peaks of the zeolites has been changed significantly, the high-resolution ^29Si MAS NMR peaks have been broadened and shifted to low field, and the resonance of Si-OH groups has appeared. The vibration of N-H has been shifted to low frequency and C-N vibration moved to high frequency in the IR spectra, and the ^13C resonance peak broadened and shifted to high field for the adsorbed amine. The facts reveal an associating interaction between the perfect framework of the zeolites and the adsorbed methylamine with hydrogen bonds, leading to the formation of Si-OH groups and the high desorption temperature of the methylamine from the zeolites.     

Synthesis and surface chemistry of nano silver particles

In this report, we present a simple wet chemical route to synthesize nano-sized silver particles, and their surface properties are discussed in detail. Silver nano particles of the size 40–80 nm are formed in the process of oxidation of glucose to gluconic acid by amine in the presence of silver nitrate, and the gluconic acid caps the nano silver particle. The presence of gluconic acid on the surface of nano silver particles was confirmed by XPS and FTIR studies. As the nano silver particle is encapsulated by gluconic acid, there was no surface oxidation, as confirmed by XPS studies. The nano silver particles have also been studied for their formation, structure, morphology and size using UV–Visible spectroscopy, XRD and SEM. Further, the antibacterial properties of these nano particles show promising results for E. Coli. The influence of the alkaline medium towards the particle size and yield was also studied by measuring the pH of the reaction for DEA, NaOH and Na₂CO₃.     

同晶外延生长法合成MFI型核壳复合分子筛

采用二次热液结晶法,以四丙基氢氧化铵水溶液预处理过的低硅ZSM-5分子筛为晶核,通过调控p H值、水量和晶化时间等二次结晶条件,在晶核上外延生长了高硅ZSM-5壳,制备了MFI/MFI核壳型复合分子筛。通过X射线衍射、扫描电镜、能量色散谱仪、透射电子显微镜、N2吸附-脱附和NH3-程序升温脱附等手段表征了所合成的核壳分子筛的晶体结构、表面形态及核/壳界面,并对它们的结构参数以及酸性进行了初步评估。结果表明,核壳复合分子筛的壳层由多层200 nm的MFI沸石晶粒组成;高硅ZSM-5分子筛壳层的生成,引入了介孔结构,显著增大了外比表面积;同时,核壳结构的形成降低了复合分子筛酸性和外表面的酸密度,但增加了弱酸量。当二次晶化母液p H值为8.5,H2O/SO2物质的量比为30,晶化时间为24 h时,高硅分子筛壳层更易可控生长。     

Preparation of Au Nanoparticles on Surface of Two Supports by Adsorption Phase Synthesis

By utilizing adsorption phase synthesis (APS), Au nanoparticles were prepared on the surface of SiO₂ with or without modification by Ni(OH)₂. TEM, XRD, and UV‐vis were employed to characterize the morphology of Au particles on the surface of two kinds of supports. The results showed that the average size of Au particles on the SiO₂ surface modified by Ni(OH)₂ was less than 5 nm. Due to high surface isoelectric point, Au particles formed in the adsorption layer were prone to distribute on the surface of SiO₂ modified by Ni(OH)₂. With content of Ni(OH)₂ in samples increasing, more Au particles with small size appeared on the support surface.     

Synthesis of Spin‐Crossover Nano‐ and Micro‐objects in Homogeneous Media

New methods are proposed for the synthesis of spin‐crossover nano‐ and micro‐objects. Several nano‐objects that are based upon the spin‐crossover complex [Fe(hptrz)₃](OTs)₂ (hptrz=4‐heptyl‐1,2,4‐triazole, Ts=para‐toluenesulfonyl) were prepared in homogeneous media. The use of various reagents (Triton X‐100, PVP, TOPO, and PEGs of different molecular weights) as stabilizing agents yielded materials of different size (6 nm–2 μm) and morphology (nanorods, nanoplates, small spherical particles, and nano‐ and micro‐crystals). In particular, when Triton X‐100 was used, a variation in the morphology from nanorods to nanoplates was observed by changing the nature of the solvent. Interestingly, the preparation of the nanorods and nanoplates was always accompanied by the formation of small spherical particles. Alternatively, when PEG was used, 200–400 nm crystals of the complex were obtained. In addition, a very promising polymer‐free synthetic method is discussed that was based on the preparation of relatively stable Fe^II–triazole oligomers in CHCl₃. Their specific treatment led to micro‐crystals, small nanoparticles, or gels. The size and morphology of all of these objects were characterized by TEM and by dynamic light scattering (DLS) where possible. Their spin‐crossover behavior was studied by optical and magnetic measurements. The spin‐transition features for large particles (>100 nm) were very similar to that of the bulk material, that is, close to room temperature with a hysteresis width of up to 8 K. The effects of the matrix and/or size‐reduction led to modification of the transition temperature and an abruptness of the spin transition for oligomeric solutions and small nanoparticles of 6 nm in size.     

Electrochemical Studies of Oxidation of Lomefloxacin and Interaction with Calf Thymus DNA at Nano‐SnO2/DHP Modified Electrode

A nanoparticle thin film modified electrode has been constructed using a glassy carbon electrode (GCE) coated with a nano‐tin oxide/dihexadecylphosphate (nano‐SnO₂/DHP). In pH 6.0 phosphate buffer solutions (PBS), lomefloxacin (LMF) appeared as an anodic peak with peak potential of 1.35 V at nano‐SnO₂/DHP modified electrode. In comparison with a bare GCE or a nano‐SnO₂ modified electrode, the nano‐SnO₂/DHP modified electrode exhibited an enhanced effectiveness for the oxidation of LMF. Cyclic voltammetry (CVs) coupled with fluorescence and UV/vis absorbance spectra techniques were used to study the interaction of LMF with Calf thymus DNA (ctDNA) in phosphate buffer solutions (PBS). The interaction of LMF and ctDNA could result in a considerable decrease in the peak currents and positive shift in the peak potential, as well as changes of fluorescence, UV/vis adsorption spectra and gel electrophoresis. All the acquired data showed that the new adduct between LMF and ctDNA was formed. Electrochemistry coupled with spectroscopy techniques could provide a relatively easy way to obtain useful information about the molecular mechanism of LMF‐ctDNA interactions.     

Effect of precursor sol pH on microstructural, optical and photocatalytic properties of vacuum annealed zinc tin oxide thin films on glass

Dip coated vacuum annealed zinc tin oxide thin films on soda lime silica glass have been deposited from the precursor sols containing zinc acetate dihydrate and tin (IV) chloride pentahydrate (Zn:Sn = 67:33, atomic ratio in percentage) in 2-methoxy ethanol by varying sol pH (0.85–5.5). Crystallinity, morphology, optical and photocatalytic properties of the films strongly depend on sol pH. Measurement of grazing incidence X-ray diffraction confirms the presence of hexagonal nano ZnO in the films derived from the sols of pH < 5.5. Film crystallinity deteriorates on increasing sol pH and the film deposited from the sol of pH 5.5 shows XRD amorphous but the selected area diffraction pattern and HRTEM image evidence the presence of nano Zn₂SnO₄ (size, 5–6 nm). Direct band gap energy of films increases on increasing sol pH. To visualize the film surface microstructure, FESEM study has been done and a rod-like surface feature is revealed in the film deposited from the sol of pH 2.85. A dependence of precursor sol pH on the photocatalytic activity of films towards degradation of Rhodamine 6G dye under UV (254 nm) irradiation is found and the highest decomposition rate constant, ‘k’ value is obtained from the film prepared from the sol of pH 5.5. The presence of zinc deficient nano Zn₂SnO₄ in the film may consider for generating the highest ‘k’ value. We also measure gelling time, viscosity of sols as well as UV and FTIR studies on the films and propose chemical reactions.     

Preparation of Li2SnO3 and its application in lithium‐ion batteries

Tin‐based oxide Li₂SnO₃ has been synthesized by a hydrothermal route as negative material for lithium‐ion batteries. The microstructure and electrochemical properties of the as‐synthesized materials were investigated by some characterizations means and electrochemical measurements. The as‐synthesized Li₂SnO₃ is a porous rod, which is composed of many uniform and regular nano‐flakes with a size of 50–60 nm. Li₂SnO₃ also displays an electrochemical performance with high capacity and good cycling stability (510.2 mAh g^?1 after 50 cycles at a current density of 60 mA g^?1 between 0.0 V and 2.0 V verusus Li/Li⁺). Copyright © 2013 John Wiley & Sons, Ltd.     

Preparation of SnO2–graphite nanocomposite anodes by urea-mediated hydrolysis

PVP-protected SnO₂ nanoparticles and SnO₂–graphite nanocomposites were prepared by urea-mediated homogeneous hydrolysis of SnCl₄. For unsupported SnO₂ TEM examination showed particles in the range of 4–6 nm, and a narrow particle size distribution. The particles also dispersed very well on a graphite surface. The SnO₂–graphite nanocomposites prepared as such combine the high specific capacity of Sn-based anodes and the cyclability of graphite, and are promising anode materials for Li ion battery applications.