Koordinationseigenschaften von Carbaboranylchlorophosphanen: Synthese und Molekülstruktur von cis-rac-Molybdäntetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaboran(12)}

Coordination Properties of Carbaboranylchlorophosphines: Synthesis and Molecular Structure of cis-rac -Molybdenumtetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12)} Rac-1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12) ( 1 ) reacts with [Mo(CO)₄(NBD)] (NBD = norbornadiene) after several hours at 50–55 °C to yield cis-rac-[Mo(CO)₄{1,2-(PPhCl)₂C₂B₁₀H₁₀}] ( 2 ). 2 was characterised spectroscopically (¹H, ¹³C, ¹¹B and ³¹P NMR) and by crystal structure determination.     

Synthesis of 1,2-bis(1-boraadamant-2-yl)ethane derivatives. Crystal structure of the racemic form

Condensation of triallylborane with octa-1,7-diyne followed by treatment of the reaction mixture with methanol afforded a mixture of stereoisomeric 1,4-bis(3-methoxy-3-bora-bicyclo[3.3.1]non-6-en-7-yl)butanes (1a,b). Hydroboration of the latter with a solution of BH₃ in THF yielded the tetrahydrofuran complex of 1,2-bis(1-boraadamant-2-yl)ethane (2) as a mixture of diastereomers. Pure racemate (2a) was obtained by crystallization from the reaction mixture and it was converted into the pyridine complex of 1,2-bis(1-boraadamant-2-yl)ethane (3). The structure of the latter was established by X-ray diffraction analysis. Complex2a was converted into the corresponding racemic 1,2-bis(1-hydroxyadamant-2-yl)ethane (4a) by the carbonylation-oxidation reaction. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 501–505, March, 2000.     

1,2-Bis(dimethylamino)-3,4,5-triphenyl-3,4,5-triphospha-1,2-diborolan und 1,2-Bis(dimethylamino)-3,4,5,6-tetra-tbutyl-3,4,5,6-tetraphospha-1,2-diborin: Synthese und Struktur sowie Berechnungen zur Molekülstruktur

1,2-Bis(dimethylamino)-3,4,5-triphenyl-3,4,5-triphospha-1,2-diborolane and 1,2-Bis(dimethylamino)-3,4,5,6-tetra-tbutyl-3,4,5,6-tetraphospha-1,2-diborine: Synthesis and Structure as well as Calculations on the Molecular Structure The diphosphides K₂[(C₆H₅)P? (C₆H₅)P? P(C₆H₅)], 4 or K₂[(tBuP)? (tBuP)₂? P(tBu)], 5 , react with (ClBNMe₂)₂ to form the binary 5-membered ring system 1,2-bis(dimethylamino)-3,4,5-triphenyl-3,4,5-triphospha-1,2-diborolane (C₆H₅P)₃(BNMe₂)₂, 2a , and the 6-membered ring system 1,2-bis(dimethylamino)-3,4,5,6-tetra-tbutyl-3,4,5,6-tetraphospha-1,2-diborine, (tBuP)₄(BNMe₂)₂, 3a , respectively. 2a and 3a could be obtained in a pure form and characterized NMR spectroscopically and by X-ray structure analyses. The two ring systems are folded; 2a exists in the ?envelope”?- 3a in the ?boat”?-conformation. Ab initio computations for 3,4,5-triphospha-1,2-diborolane M5 show that the global minimum is characterized by one B? P double bond. The parent compound geometry M6 is characterized by transannular bonding in the PH? BH? BH? PH moiety which differs in character from those in the four- and five-membered rings (BH)₂(PH)₂ and (BH)₂(PH)₃ M5 d , respectively. Explicit calculation of the influence of amino substituents on boron improved agreement of the bond length between computed and X-ray data.     

Stereoselective Synthesis and Diels-Alder Reactions of (Z)- and (E)-1,2-bis(Phenylthio)-1,3-Butadiene

Bromination of 3-phenylthio-2-sulfolene (2) with N-bromosuccinimide gave 2-bromo-3-phenylthio-2-sulfolene (3) which was converted mainly to 2,3-bis(phenylthio)-2-sulfolene (4) by treatment with sodium phenylthiolate. Thermal desulfonylation of 4 at different temperatures in the presence of a base (DBU) yielded stereoselectively the (Z)- and (E)-1,2-bis(phenylthio)-1,3-butadiene (6). These two geometric isomers could be thermally interconverted. The Diels-Alder reactions of 6 were also investigated. Only the (Z)-diene 6a could undergo the Diels-Alder reaction; the (E)-diene 6b was in situ converted to the Z isomer before undergoing (he Diels-Alder reaction. The reaction of 6a with N-phenylmaleimide gave the cycloaddition product 7 with complete endo selectivity, but under daylight or during chromatography it readily underwent a thioallylic rearrangement to yield 8 with inversion of configuration. The cycloaddition of 6a with methyl acrylate proceeded regiospecifically, but generating a mixture of endo and exo isomers. The endo/exo ratio could be increased by using ZnCl₂ as the catalyst.     

High-yield synthesis and characterization of 1,2-bis(p-vinylphenyl)ethane

The quantitative synthesis and complete characterization of 1,2-bis(p-vinylphenyl)ethane (p,p-BVPE) and its meta-, para-mixed isomers are reported. These crosslinkers copolymerize randomly with p-methylstyrene, leading to random crosslink distributions. The crosslinkers are prepared by Grignard coupling of (m,p)-vinylbenzyl chloride in tetrahydrofuran at low temperature to give the statistical mixture of m,m-, m,p-, and p,p-isomers in quantitative yield. Pure p-vinylbenzyl chloride is converted to pure p,p-BVPE. p,p-BVPE has also been separated from the mixture of isomers. The isomers are characterized by elemental analysis, mass spectrometry, ¹H-NMR, and ¹³C-NMR and by reversed-phase HPLC. © 1994 John Wiley & Sons, Inc.     

A Versatile Method for the Preparation of Enantiomeric Benzene-1,2-bis(alanine) Derivatives

Abstract

A versatile method for the preparation of dicarba analogues of cystine as substituted benzene-, dihydrobenzene-, and tetrahydrobenzene-1,2-bis(alanine) derivatives is described. The partially saturated products resulted from Diels-Alder adduct formation with stereoselectively prepared (2R,7R)-2,7-diacetamido-4,5-bis (methylene)octane-1,8-dioic acid dimethyl ester. Aromatization of the dihydro adducts by manganese dioxide provided the parent benzene-1,2-bis(alanine) derivatives.     

Beiträge zur Chemie des Phosphors. 239 [1]. Reaktion von Diphosphan(4) mit Diboran(6) und mit THF-Boran: Bildung von Diphosphan-boran,P2H4 · BH3, und Diphosphan-1,2-bis(boran), BH3 · P2H4 · BH3

Contributions to the Chemistry of Phosphorus. 239. On the Reaction of Diphosphane(4) with Diborane(6) and with THF-Borane: Formation of Diphosphane-borane, P₂H₄ · BH₃, and Diphosphane-1,2-bis(borane), BH₃ · P₂H₄ · BH₃ Diphosphane(4) always reacts with diborane(6) in the temperature range of ?118 to ?78°C, to furnish a mixture of diphosphane-borane, P₂H₄ · BH₃ ( 1 ), and diphosphane-1,2-bis(borane), BH₃ · P₂H₄ · BH₃ ( 2 ), in addition to small amounts of triphosphane-1,3-bis(borane), BH₃ · P₃H₅ · BH₃, and phosphane-borane, BH₃ · PH₃, irrespective of the molar ratios of the reactants employed. The formation of the 1 : 1 adduct P₂H₄ · B₂H₆ reported in the literature [4] could not be confirmed. The structures of compounds 1 and 2 were investigated by nuclear magnetic resonance spectroscopy which revealed the complete, homolytic cleavage of diborane(6). As a result of the bonding of one BH₃ group to diphosphane(4), the Lewis basicity of the other PH₂ group is markedly reduced. Similar mixtures of products are obtained when the borane adduct THF · BH₃ is employed in an analogous reaction. In the case of a 1 : 1 molar ratio of P₂H₄ : THF · BH₃ at ?78°C, the reaction furnishes compound 1 exclusively. This product can be isolated in the pure state and is found to be appreciably more stable than diphosphane(4).     

Vibrational Spectroscopic Study of [1,2-bis(4-pyridyl)ethane]metal(II) Tetracyanonickelate(II). 2 m-Xylene Clathrates

Four new Hofmann-type clathrates of the form M(bpa)₂Ni(CN)_4· 2m-xylene (M = Mn , Fe , Co and Ni; bpa = 1,2-bis(4-pyridyl)ethane) have been synthesized and characterized by vibrational spectroscopy. The M(bpa)₂Ni(CN)₄ (M = Fe and Co) host structure is similar to the classical Hofmann-type host framework composed of layers of a two dimensional catena-metal tetra--cyanonickelate(II) network, but in M(bpa)₂Ni(CN)₄ (M = Mn and Ni), the Ni(CN)₄ moiety behaves as a bidentate –[NC-Ni(CN)₂-CN–]– unit in the host framework.     

Synthesis and properties of aromatic polyamides derived from 1,2-bis(4-aminophenoxy)benzene and aromatic dicarboxylic acids

1,2-Bis(4-aminophenoxy)benzene was synthesized in two steps by the preparation of 1,2-bis(4-itrophenoxy)benzene from 1,2-dihydroxybenzene (catechol) and p-chloronitrobenzene and subsequent reduction with a 10% Pd-C catalyst and hydrazine hydrate. Aromatic polyamides with an inherent viscosity in the range of 1.08–2.00 dL/g were prepared by the direct polycondensation of this diamine with various aromatic dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. Most of the polymers formed were soluble in aprotic solvents such as NMP and N,N-methylacetamide (DMAc), and afforded transparent, flexible, and tough films upon casting from DMAc solutions. Most of the cast films showed obvious yield points in their stress-strain curves and had tensile strength among 64–89 MPa, elongation at break among 5–23%, and initial modulus in 1.7–2.5 GPa. The glass transition temperatures (T_g) of these polymers were in the range of 207–278°C, and the 10% weight loss temperatures were recorded above 475°C in nitrogen and above 452°C in air. © 1995 John Wiley & Sons, Inc.     

Eine neue Synthese von Tetrachlordiphosphan sowie Untersuchungen zur 1,2-Addition an Cycloalkene

A New Synthesis of Tetrachlorodiphosphane and Investigations Concerning the 1,2-Addition to Cycloalkenes . The phosphorus subhalide P₂Cl₄ has been synthesized by co-condensation of PCl₃ and Cu vapour in 14% yield. The ³¹P-NMR chemical shift of P₂Cl₄ has the value of δ=155. P₂Cl₄ decomposes during several hours at 0°C in a N₂ atmosphere by a disproportionation process to yield PCl₃ and a yellow polymeric compound of the approximately composition (PCl)_x. P₂Cl₄ is flammable in air to give POCl₃ and (PCl)_x. Investigations regarding the addition of P₂Cl₄ to cyclooctyne, cyclohexene, and cyclohexa-1,4-diene has been carried out. Surprisingly, cyclooctyne does not react with P₂Cl₄ but cyclohexene as well as cyclohexa-1,4-diene undergo 1,2-addition to yield the trans-1,2-bis(dichlorophosphino) substituted carbonhydrides. By derivatization with Me₃Si—NMe₂ the corresponding trans-1,2-bis[bis(dimethylamino)phosphino] compounds are synthesized.     

Reaction of dialkyl H-phosphonates with azines and 1,2-bis(tert-butylimino)ethane

Acetaldehyde and butyraldehyde azines and 1,2-bis(tert-butylimino)ethane add only one molecule of dialkyl H-phosphonate at room temperature to form alkyl (-aminoalkyl)phosphonates. IR spectra of compounds obtained are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2063–2065, August, 1996.     

Photochromic dihetarylethenes. 10. Photochromic 1,2-bis[2-(benzothiazol-2-yl)-3-thienyl]- and 1,2-bis[2-(benzothiazol-2-yl)benzothiophen-3-yl]ethenes

Dithienylethenes containing the thiophene rings with benzothiazolyl substituents in position 2 were synthesized. 1,2-Bis[2-(benzothiazol-2-yl)benzothiophen-3-yl]hexafluorocyclopentene and 1,2-bis[2,5-di(benzothiazol-2-yl)-3-thienyl]hexafluorocyclopentene possess photochromic properties. The open forms of 1,2-bis(2-benzothiazolylhetaryl)ethenes fluoresce, but introduction of the benzothiazole rings into dihetarylethenes significantly lowers the fatigue resistance of photochromes and favors thermal reversibility.     

Exploratory syntheses,crystal structures,and properties of two new 3-D coordination polymers of Mn(II) and Fe(II) with (54.62) (510.63.7.8) topological spaces

Solvothermal reactions of terphenyl-2,5,2′,5′-tetracarboxylic acid (H₄qptc) and M^II (M = Mn, Fe) in the presence of 1,2-bis(diphenylphosphino)ethane (dppe) afford two new coordination polymers, [M(qptc)(dppe-O)] _n (M?=?Mn (1), Fe (2)) (1,2-bis(diphenylphosphoryl)ethane?=?dppe-O). The structures have been determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR, TGA, and magnetism. The M^II in 1 and 2 are linked by qptc^4? to form 2-D layers, which are further connected via the oxidized dppe (dppe-O) exhibiting a (4,6)-connected network with the (5⁴.6²)(5¹⁰.6³.7.8) topology.     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. 61. Darstellung und Kristallstruktur von Tetramethyltitan-1,2-bis(dimethylphosphino)ethan

Contributions to the Chemistry of Transition Metal Alkyl Compounds. 61. Preparation and Crystal Structure of Tetramethyltitanium-1,2-bis(dimethylphosphino)ethane The title complex 1 was synthesized by addition of 1,2-bis(dimethylphosphino)ethane to a solution of tetramethyltitanium in diethylether. The complex was characterized by ¹H, ¹³C and ³¹P NMR spectra and by X-ray crystal structure analysis. 1 consists of two independent molecules with distorted octahedral structure.     

General synthetic entry to linearly-fused dihydrobenzocyclobutene-1,2-diones and benzocyclobutene-1,2-diones via annulation of 1,2-bis(methylene)carbocycles with 3-chloro-3-cyclobutene-1,2-dione

The tandem Diels-Alder/dehydrochlorination reaction of semisquaric chloride (1) with the 1,2-bis(methylene)cycloalkanes 2a-c and 1,2-bis(methylene)-4-cyclohexene (9) affords the linearly-fused cycloalkanodihydrobenzocyclobutene-1,2-diones 3a-c and 3,4,7,8-tetrahydrocyclobuta[b]-naphthalene-1,2-dione (10), respectively. On treatment with MnO2, 3a-c are dehydrogenated to the respective carbocycle-fused benzocyclobutene-1,2-diones 4a-c in good yields. 3a and 3b react with bromine to give the addition products 5a,b, which, on treatment with silver trifluoroacetate, afford the benzocyclobutene-1,2-diones 4a,b. For preparative purposes, the sequence 3-->5-->4 can be performed advantageously as a "one-pot procedure". Double-condensation reactions of 4a,b with alpha,alpha'-biscyano-o-xylene and o-phenylenediamine afford the pentacyclic biphenylenes 7a,b and the cyclobutahetarenes 8a,b, respectively. These cyclobutenediones suggest themselves as building blocks for the construction of extended linearly-fused polycyclic compounds with novel ring sequences. o-Quinodimethanes 12a-g generated in situ by the thermal decomposition of the respective 1,4-dihydro-2,3-benzoxathiin-3-oxides (sultines) 11a-g react with semisquaric chloride (1) to afford the 3,8-dihydronaphtho[b]cyclobutene-1,2-diones 13a-g. These, on dehydrogenation with bromine and/or MnO2, furnish the naphtho[b]cyclobutene-1,2-diones 14a-g in fair to good yields. As described for 4a,b the naphtho[b]cyclobutene-1,2-diones 14a-c are condensed with alpha,alpha'-biscyano-o-xylene and o-phenylenediamine to furnish the pentacyclic biphenylenes 15a-c and the pentacyclic cyclobutahetarenes 16a-c.     

Preparation of Pseudo-Arsonolipids: Dl-2,3-Diacyloxybutane-1,4-Bis(Arsonic Acids)

Abstract

The title pseudo-arsonolipid with palmitoyl side chain has been prepared in ～70% yield from its parent DL-2,3-dihydroxybutane-1,4-bis(arsonic acid) after reduction of the As(V) to As(III) by thiophenol, acylation with palmitoyl chloride in the presence of pyridine and catalytic amounts of 4-(dimethylamino)pyridine, and reoxidation of As(III) to As(V) by hydrogen peroxide. In CDCl₃/CD₃OD esterification of the –AsO₃H₂ groups was detected by ¹H NMR.     

Metallderivate von Molekülverbindungen. VII. Bis[1,2-bis(dimethylamino)ethan-N,N′]lithium-disilylphosphanid — Synthese und Struktur

Metal Derivatives of Molecular Compounds. VII. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium Disilylphosphanide — Synthesis and Structure Crystalline lithium phosphanides studied so far show a remarkably high diversity of structure types dependent on the ligands at lithium and the substituents at phosphorus. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium disilylphosphanide ( 1 ) discussed here, belongs to the up to now small group of compounds which are ionic in the solid state. It is best prepared from silylphosphane by twofold lithiation with lithium dimethylphosphanide first and subsequent monosilylation with silyl trifluoromethanesulfonate, followed by complexation. As found by X-ray structure determination (wR = 0.038) on crystals obtained from diethyl ether {monoclinic; space group P2₁/c; a = 897.8(1); b = 1 673.6(2); c = 1 466.8(1) pm; β = 90.73(1)° at ?100 ± 3°C; Z = 4 formula units}, the lithium cation is tetrahedrally coordinated by four nitrogen atoms of two 1,2-bis(dimethylamino)ethane molecules. Characteristic parameters of the disilylphosphanide anion are a shortened average P? Si bond length of 217 pm (standard value 225 pm) and a Si? P? Si angle of 92.3°.     

Bis(1,2-dimethoxyethan-O,O′)lithium-phosphanid, -arsanid und -chlorid – drei neue Vertreter des Bis(1,2-dimethoxyethan-O,O′)lithium-bromid-Typs

Metal Derivatives of Molecular Compounds. IX. Bis(1,2-dimethoxyethane- O,O′ )lithium Phosphanide, Arsanide, and Chloride – Three New Representatives of the Bis(1,2-dimethoxyethane- O,O′ )lithium Bromide Type Experiments to obtain thermally unstable lithium silylphosphanide at –60 °C from a 1,2-dimethoxyethane solution resulted in the isolation of its dismutation product bis(1,2-dimethoxyethane-O,O′)lithium phosphanide ( 1 ). The homologous arsanide 2 precipitated after a frozen solution of arsane in the same solvent had been treated with lithium n-butanide at –78 °C. Unexpectedly, too, the analogous chloride 3 and bromide 4 were formed in reactions of 1-chloro-2,2-bis(trimethylsilyl)-1λ³-phosphaethene with (1,2-dimethoxyethane-O,O′)lithium bis(trimethylsilyl)stibanide and of lithium 1,2,3,4,5-pentaphenyl-2,3-dihydro-1λ³-phosphol-3-ide with ω-bromostyrene, respectively. The monomeric complexes 1 {–100 ± 3 °C; a = 1391.1(4); b = 809.8(2); c = 1249.1(3) pm; β = 102.84(2)°}, 2 {–100 ± 3 °C; a = 1398.3(4); b = 819.8(3); c = 1258.5(4) pm; β = 103.35(2)°} and 3 {–100 ± 3 °C; a = 1308.4(2); b = 788.2(1); c = 1195.6(1) pm; β = 95.35(1)°} crystallize in the monoclinic space group C2/c with four solvated ion pairs in the unit cell; they are isotypic with bis(1,2-dimethoxyethane-O,O′)lithium bromide ( 4 ) {–73 ± 2 °C; a = 1319.0(2); b = 794.1(1); c = 1214.3(2) pm; β = 96.22(1)°}, already studied by Rogers et al. [13] at room temperature. The neutral complexes show a trigonal bipyramidal configuration of symmetry C₂, pnicogenanide or halide anions occupying equatorial sites {Li–P 260.4(4); Li–As 269.8(6); Li–Cl 238.6(7); Li–Br 256.3(10) pm} and the chelate ligands spanning equatorial and axial positions {Li–O_eq 205.4(4) to 207.4(4); Li–O_ax 208.9(3) to 215.5(2) pm}. The coordination within the (dme)₂Li fragment, the Li–X distances (X = P, As, Cl, Br), the structure of the chelate rings, and the packing of the neutral complexes are discussed in detail.     

Polybenzoxazole from 1,4-bis(trichloromethyl)benzene

High molecular weight poly(phenylenebenzobisoxazole) (PBO) was synthesized from 1,3-diamino-4,6-dihydroxybenzene dihydrochloride (1) and 1,4-bis(trichloromethyl)benzene (3) in polyphosphoric acid (PPA) or a mixture of PPA and methanesulfonic acid. When PPA was used as the solvent, 3 was first converted in situ to terephthalic acid before 1 was added to minimize degradation of 1. Compound 3 did not need to be sealed from atmospheric moisture because the trichloromethyl groups were not moisture sensitive. It was not necessary to use micronized 3. Adjustment of P₂O₅ content was optional for this reaction because no water was liberated from the condensation of 1 and 3. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2143–2145, 1997