Beiträge zur Chemie des Phosphors. 224. Zur Thermolyse von 1,2-Di-tert-butyldiphosphan, 1,2,3-Tri-tert-butyltriphosphan und Tetra-tert-butylcyclotetraphosphan

Contributions to the Chemistry of Phosphorus. 224. On the Thermolysis of 1,2-Di-tert-butyldiphosphane, 1,2,3-Tri-tert-butyltriphosphane, and Tetra-tert-butylcyclotetraphosphane On disproportionation of 1,2-di-tert-butyldiphosphane, H(t-Bu)P? P(t-Bu)H (1) , 1,2,3-tri-tert-butyltriphosphane, H₂(t-BuP)₃ (2) , is formed which reacts further at temperatures above 100°C to give 1-(tert-butylphosphino)-2,3,4-tri-tert-butylcyclotetraphosphan, P₅(t-Bu)₄H (4) . Compound 4 reacts with 1 or 2 with lengthening of the P-sidechain to furnish the corresponding 1-(1,2-di-tert-butyldiphosphino)-2,3,4-tri-tert-butylcyclotetraphosphane, P₆(t-Bu)₅H (5) . At temperatures above 170°C, 5 disproportionates into the tetra-tert-butylcyclotetraphosphane, (t-BuP)₄ (3) which is stable up to about 200°C, and the bicyclo[3.1.0]hexaphosphane P₆(t-Bu)₄ from which the polycyclophosphanes P₉(t-Bu)₃ and P₈(t-Bu)₆ arise during the further course of the thermolysis. These products are finally converted through even more phosphorus-rich and more highly condensed t-butylcyclophosphanes into elemental phosphorus. In each reaction step, varying amounts of the monophosphane derivatives t-BuPH₂, (t-Bu)₂PH, and (t-Bu)₃P are formed. The proposed course of the reaction is further substantiated by the pyrolysis products of pure 2 and 3 .     

Beiträge zur Chemie des Phosphors. Synthese und Eigenschaften des 1,2-Diphospha-3,4-diboretans (t-BuP)2(BNMe2)2

Contributions tot he Chemistry of Phosphorus. 148. Synthesis and Properties of the 1,2-Diphospha-3,4-diboretane (t-BuP)₂(BNMe₂)₂ The first 1, 2-diphospha-3,4-diboretane (1,2-diphospha-3, 4-diboracyclobutane) (t-BuP)₂(BNMe₂)(1) was prepared by [2+2] cyclocondensation of K(t-Bu)P? P(t-Bu)K with Cl(Me₂N)B? B(NMe₂)Cl. 1 could be isolated in the pure state and was NMR spectroscopically characterized as a compound with a planar P₂ B₂ ring skeleton.     

Reaktionen des tBu(Me3Si)P?P(Li)?P(tBu)2 mit CH3Cl und 1,2-Dibromethan

Reactions of tBu(Me₃Si)P? P(Li)? P(tBu)₂ with CH₃Cl and 1,2-Dibromoethane tBu(Me₃Si)P? P(Li)? P(tBu)₂ · 0.95 THF 1 with CH₃Cl (?70°C) yields tBu(Me₃Si)P? P = P(Me)(tBu)₂ 2 at ?70°C, with 1,2-Dibromoethane tBu(Me₃Si)P? PBr? P(tBu)₂ 3 (main product) and tBu(Me₃Si)P? P?P(Br)tBu₂ 4. 3 eliminates Me₃SiBr yielding the cyclotetraphosphane {tBuP? P[P(tBu)₂]}₂ 5 .     

Metallderivate von Molekülverbindungen. VII. Bis[1,2-bis(dimethylamino)ethan-N,N′]lithium-disilylphosphanid — Synthese und Struktur

Metal Derivatives of Molecular Compounds. VII. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium Disilylphosphanide — Synthesis and Structure Crystalline lithium phosphanides studied so far show a remarkably high diversity of structure types dependent on the ligands at lithium and the substituents at phosphorus. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium disilylphosphanide ( 1 ) discussed here, belongs to the up to now small group of compounds which are ionic in the solid state. It is best prepared from silylphosphane by twofold lithiation with lithium dimethylphosphanide first and subsequent monosilylation with silyl trifluoromethanesulfonate, followed by complexation. As found by X-ray structure determination (wR = 0.038) on crystals obtained from diethyl ether {monoclinic; space group P2₁/c; a = 897.8(1); b = 1 673.6(2); c = 1 466.8(1) pm; β = 90.73(1)° at ?100 ± 3°C; Z = 4 formula units}, the lithium cation is tetrahedrally coordinated by four nitrogen atoms of two 1,2-bis(dimethylamino)ethane molecules. Characteristic parameters of the disilylphosphanide anion are a shortened average P? Si bond length of 217 pm (standard value 225 pm) and a Si? P? Si angle of 92.3°.     

Koordinationseigenschaften von Carbaboranylchlorophosphanen: Synthese und Molekülstruktur von cis-rac-Molybdäntetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaboran(12)}

Coordination Properties of Carbaboranylchlorophosphines: Synthesis and Molecular Structure of cis-rac -Molybdenumtetracarbonyl{1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12)} Rac-1,2-bis(chlorophenylphosphino)-1,2-dicarba-closo-dodecaborane(12) ( 1 ) reacts with [Mo(CO)₄(NBD)] (NBD = norbornadiene) after several hours at 50–55 °C to yield cis-rac-[Mo(CO)₄{1,2-(PPhCl)₂C₂B₁₀H₁₀}] ( 2 ). 2 was characterised spectroscopically (¹H, ¹³C, ¹¹B and ³¹P NMR) and by crystal structure determination.     

Synthesis and chemical properties of sodium 3,4,5-tris(diethylamino)-1,2-diphosphacyclopentadienide

1,2,3-Tris(diethylamino)cyclopropenylium iodide (1) reacted with sodium polyphosphides to give sodium 3,4,5-tris(diethylamino)-1,2-diphosphacyclopentadienide (2) in high yields. Chemical behavior of compound 2 in the reactions with organic and organoelement electrophiles was studied and compared with that of sodium 3,4,5-triphenyl-1,2-diphosphacyclopentadienide.     

Synthese der Stannatetraphospholane (tBuP)4SnR2 (R = tBu,nBu, C6H5) und (tBuP)4Sn(Cl)nBu Molekül- und Kristallstruktur von (tBuP)4Sn(tBu)2

Synthesis of the Stannatetraphospholanes (tBuP)₄SnR₂ (R = tBu, nBu, C₆H₅) and (tBuP)₄Sn(Cl)nBu Molecular and Crystal Structure of (tBuP)₄Sn(tBu)₂ The reaction of the diphosphide K₂[tBuP-(tBuP)₂-PtBu] 4 with the halogenostannanes (tBu)₂SnCl₂, (nBu)₂SnCl₂, (C₆H₅)₂SnCl₂ or nBuSnCl₃ in a molar ratio of 1 : 1 leads via a [4 + 1]-cyclocondensation reaction to the stannatetraphospholanes (tBuP)₄SnR₂ 3 b–3 d and (tBuP)₄Sn(Cl)nBu 3 e , respectively, with the binary 5-membered P₄Sn ring system. 3 b was characterized by a single crystal structure analysis; the 5-membered ring exists in a planar conformation. The compounds 3 b–3 e were identified by NMR and also by mass spectroscopy; the ³¹P{¹H}-NMR spectra of 3 b–3 d showed an AA′MM′ (AA′MM′X), 3 e on the other hand an ABCD (ABCDX) spin system.     

Synthese und Kristallstruktur von Bis(1,2-dimethyl-5-nitro-imidazol)dichlorocobalt(II)

Synthesis and Crystal Structure of Bis(1,2-dimetyl-5-nitro-imidazole)dichlorocobalt(II) Bis(1,2-dimethyl-5-nitro-imidazol)dichlorocobalt(II) was obtained by reaction of CoCl₂ · 6 H₂O with 1,2-dimethyl-5-nitro-imidazole in methanol. The compound forms blue crystals which were characterized by IR and UV-vis spectroscopy and by an X-ray crystal structure determination. Co(C₅H₇N₃O₂)₂Cl₂: tetragonal, space group I4 2d, Z = 8, a = 1142.1(1) pm, c = 2577.3(2) pm. R = 0.036 for 670 independent reflexions. The Co atom is tetrahedrally surrounded by two chlorine and two N atoms at distances of 222.8(2) and 203.5(4) pm.     

1,2-Diphosphaferrocene als Liganden in Übergangsmetallkomplexen. Röntgenstrukturanalyse von [(η5-1,3-tBu2C5H3){η5-1,2-[Co2(CO)6]-3,4-(Me3SiO)2-5-(Me3Si)P2C3}]

1,2-Diphosphaferrocenes as Ligands in Transition Metal Complexes. X-Ray Structure Analysis of [(η⁵-1,3-tBu₂C₅H₃){η⁵-1,2-[Co₂(CO)₆]-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}] Reaction of metallo-1,2-diphosphapropene (η⁵-tBuC₅H₄)(CO)₂Fe? P(SiMe₃)? P?C(SiMe₃)₂ with (Z-cyclooctene)Cr(CO)₅ afforded the pentacarbonylchromium adduct of a 1,2-diphosphaferrocene [(η⁵-tBuC₅C₅H₄){η⁵-1-[Cr(CO)₅]-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 1 c ). Diphosphaferrocene [(η⁵-tBuC₅H₄){η⁵-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 2 c ) was formed when (η⁵-tBuC₅H₄)(CO)₂FeBr was treated with (Me₃Si)₂P? P?C(SiMe₃)₂ in toluene at 60°C. Photolysis of molybdenum- and tungsten hexacarbonyl in the presence of [(η⁵-1,3-tBu₂C₅H₃){η⁵-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 2 b ) gave the pentacarbonylmetal adducts 8 (M = Mo) and 9 (M = W), respectively. A corresponding manganese derivative resulted from the photochemical reaction of 2 b and (MeC₅H₄)Mn(CO)₃. Treatment of 2 b with Co₂(CO)₈ yielded trinuclear [(η⁵-1,3-tBu₂C₅H₃){η⁵-1,2-[Co₂(CO)₆]-3,4-(Me₃SiO)₂-5-(Me₃Si)P₂C₃}Fe] ( 11 ). Constitution and configuration of compounds 1 c, 2 c, 8 – 11 were determined by elemental analyses and spectra (IR, ¹H-, ¹³C-, ³¹P-NMR, MS). In addition the molecular structure of 11 was established by single crystal X-ray analysis.     

Reaction of 1,2-diarylhydrazines with acetic anhydride catalyzed by 4-(dimethylamino)pyridine

Summary A new method for the synthesis of 1,2-diaryl-1,2-dihydro-5-methyl-3H-pyrazol-3-ones3 and 4-acetyl-1,2-diaryl-1,2-dihydro-5-methyl-3H-pyrazol-3-ones5 is presented. The reaction of 4,4-disubstituted 1,2-diarylhydrazines1 with acetic anhydride in the presence of an equimolar amount of 4-(dimethylamino)pyridine leads to mixtures of the corresponding acetyl derivatives2 and3. Under the same conditions, 2,2-disubstituted 1,2-diarylhydrazines yield mixtures of3 and5.

---

4-(Dimethylamino)pyridin-katalysierte Reaktion von 1,2-Diarylhydrazinen mit Essigsäureanhydrid

Zusammenfassung Eine neue Methode zur Synthese von 1,2-Diaryl-1,2-dihydro-5-methyl-3H-pyrazol-3-onen3 und 4-Acetyl-1,2-diaryl-1,2-dihydro-5-methyl-3H-pyrazol-3-onen5 wird beschrieben. Die Reaktion von 4,4-disubstituierten 1,2-Diaryl-hydrazinen1 mit Essigsäureanhydrid führt in Gegenwart eines Äquivalentes 4-(Dimethylamino)pyridin zu Gemischen der entsprechenden Acetylderivate2 und3. Unter den gleichen Bedingungen werden aus 2,2-disubstituierten 1,2-Diarylhydrazinen Gemische aus3 und5 erhalten.

     

Über die Umsetzung von Tris(dimethylamino)phosphin,Triisopropylphosphin und tButyldifluorphosphin mit tertiären Alkylaziden: Phosphazidbildung versus Phosphinimidbildung. Röntgenstrukturen von Triphenylmethylazid und Tris(dimethylamino)-N-triphenylmethylphosphazid

Reaction of Tris(dimethylamino)phosphine, Triisopropylphosphine and ^tButyldifluorophosphine with Tertiary Alkyl Azides: Phosphazide Formation versus Phosphinimide Formation. X-Ray Crystal Structures of triphenylmethylazide and Tris(dimethylamino)-N-triphenylmethyl Phosphazide Tris(dimethylamino)-phosphine and triisopropylphosphine react with tertiary alkyl azides RN₃ (R = ^tBu, 1-Ad, Trt) to give the corresponding phosphazides 1a–1c and 2a–2c , which involve a linear PN₃R-unit. The coordination geometries of the N₃ chains in triphenylmethylazide and 1c are completely different, associated with a change of hybridisation. Hence, the N₃-group of the triphenylmethylazide is nearly linear, whereas that of 1c shows approximately tetrahedral angles. The coordination geometry at the central nitrogen atom also depends on the substituents, possibly because of their varying ability to delocalize the π-electron system. In contrast, the reaction of ^tbutyldifluorophosphine with the same azides RN₃ led to the ^tbutyldifluorophosphinimides 3a–3c of the type ^tBuP(:NR)F₂. The hydrolysis of these compounds afforded the ^tbutylphosphonamidic fluorides ^tBuP(:O)(NHR)F (R = 1-Ad: 4b , Trt: 4c ), instead of the expected substitution products ^tBuP(:NR)(OH)F.     

1,1‐Diethyl‐1‐germa‐2,3,4,5‐tetra‐tert‐butyl‐2,3,4,5‐tetraphospholan (C2H5)2Ge(tBuP)4, Molekül‐ und Kristallstruktur

1,1‐Diethyl‐1‐germa‐2,3,4,5‐tetra‐ tert ‐butyl‐2,3,4,5‐tetraphospholane (C₂H₅)₂Ge( t BuP)₄, Molecular and Crystal Structure The reaction of the diphosphide K₂[(tBuP)₄] · THF ( 1 ) with the germanium(IV) compound (C₂H₅)₂GeCl₂ leads via a [4 + 1]‐cyclo‐condensation reaction to 1,1‐diethyl‐1‐germa‐2,3,4,5‐tetra‐tert‐butyl‐2,3,4,5‐tetraphospholane (C₂H₅)₂Ge(tBuP)₄ ( 2 ) with the 5‐membered GeP₄ ring system. 2 could be characterized ³¹P NMR spectroscopically, mass spectrometrically and by a single crystal structure analysis.     

N(B(NMe2)2)(Si(NMe2)3)(Ti(NMe2)3), [N(Si(NMe2)3)(Ti(NMe2)2)]2 und N(SiMe3)(Si(NMe2)3)(Ti(NMe2)3) — Synthese und Charakterisierung neuer molekularer Einkomponentenvorläufer für nitridische und carbonitridische Keramiken

N(B(NMe₂)₂)(Si(NMe₂)₃) (Ti(NMe₂)₃), [N(Si(NMe₂)₃)(Ti(NMe₂)₂)]₂ und N(SiMe₃)(Si(NMe₂)₃)(Ti(NMe₂)₃) — Synthesis and Characterization of New Molecular Single-source Precursors for Nitride and Carbonitride Ceramics Synthesis and spectroscopic data of the title compounds are reported. [N(Si(NMe₂)₃)(Ti(NMe₂)₂)]₂ crystallizes in the space group P1 , a = 8.406(7), b = 10.673(8), c = 10.872(6) Å, α = 68.45(4)°, β = 71.72(4)°, γ = 78.11(7)°, 2 877 diffractometer data (F_o ? 2σF_o), R = 0.051. The compound is characterized by a planar four-membered Ti₂N₂-ring with exocyclic tris(dimethylamino)silyl substituents attached to the nitrogen atoms of the ring.     

Reaktionen von (tBu)2P?PP(Br)tBu2 mit LiP(SiMe3)2, LiPMe2 und LiMe,LitBu, LinBu

Reactions of (tBu)₂P? P?P(Br)tBu₂ with LiP(SiMe₃)₂, LiPMe₂ and LiMe, LitBu and LinBu The reactions of (tBu)₂P? P?P(Br)tBu₂ 1 with LiP(SiMe₃)₂ 2 yield (Me₃Si)₂P? P(SiMe₃)₂ 4 and P[P(tBu)₂]₂P(SiMe₃)₂ 5 , whereas 1 with LiPMe₂ 2 yields P₂Me₄ 6 and P[(tBu)₂]₂PMe₂ 7 . 1 with LiMe yields the ylid tBu₂P? P?P(Me)tBu₂ (main product) and [tBu₂P]₂PMe 15 . In the reaction of 1 with tBuLi [tBu₂P]₂PH 11 is the main product and also tBuP? P?P(R)tBu₂ 21 is formed. The reaction of 1 with nBuLi leads to [tBu₂P]₂PnBu 17 (main product) and tBu₂P? P?P(nBu)tBu₂ 22 (secondary product).     

Die Bildung von [(tBu)2P]2P?P[P(tBu)2]2 aus LiP[P(tBu)2]2 und 1,2-Dibromethan. Die Thermolyse von tBu2P?PP(Br)tBu2

[(tBu)₂P]₂P? P[P(tBu)₂]₂ from LiP[P(tBu)₂]₂ and 1,2-Dibromomethane. Pyrolysis of tBu₂P? P?P(Br)tBu₂ All products of the reaction of [tBu₂P]₂PLi 1 with 1,2-dibromoethane 2 were investigated. Already at ?70°C tBu₂P? P?P(Br)tBu₂ 3 as main product and [tBu₂P]₂PBr 4 are formed. Only with an excess of 1 also [tBu₂P]P? P[P(tBu)₂]₂ 5 is obtained. Warming of a pure solution of 3 in toluene from ?70°C to ?30°C leads to 4 , and at 20°C tBu₂PBr and the cyclophosphanes P₄[P(tBu)₂]₄ and P₃[P(tBu)₂]₃ are observed. 5 does not result from 3 , it's rather a byproduct from the reaction of 1 with 4 . Also the ylide 3 and 1 yields 5 .     

Synthese und Strukturbestimmung von (tBuP)4Sn(CH3)2 und (CH3)2Sn[(tBu)P?P(tBu)]2Sn(CH3)2

Synthesis and Structure Analysis of (tBuP)₄Sn(CH₃)₂ and (CH₃)₂Sn[(tBu)P? P(tBu)]₂Sn(CH₃)₂ The diphosphides K₂[(tBu)P? (tBuP)₂? P(tBu)] 7 or K₂[(tBu)P? P(tBu)] 8 react with (CH₃)₂SnCl₂ in a molar ratio of 1 : 1 to form the binary 5-membered ring system P₄Sn 4 a and the 6-membered ring system Sn(P₂)₂Sn 5 a respectively. When (CH₃)₂SnCl₂, however, is treated with 8 in a molar ratio of 2 : 1 the 4-membered ring system P₃Sn 2 a is formed which includes the fragmentation of the intermediate K₂[(CH₃)₂Sn ((tBu)P? P(tBu))₂] 9. 4 a and 5 a could be obtained in a pure form and characterized NMR spectroscopically and by X-ray structure analyses; 2 a was identified only NMR spectroscopically.     

Lanthanocene amide complexes as single‐component initiators for the polymerization of (dimethylamino)ethyl methacrylate

Polymerization of (dimethylamino)ethyl methacrylate (DMAEMA) by lanthanocene amide complexes was investigated. The results show that (MeC₅H₄)₂LnN(i‐Pr)₂[tetrahydrofuran (THF)] (Ln = Y, Er, Yb), (MeC₅H₄)₂YbNC₅H₁₀(HNC₅H₁₀) (HNC₅H₁₀ = piperidine), (MeC₅H₄)₂YbNPh₂(THF), and (t‐BuC₅H₄)₂YbNPh₂(THF) are effective initiators for the polymerization of DMAEMA, and the molecular weights of the polymers obtained exceed 100 × 10³. The polymerization reactions can be varied over quite a broad range of temperatures from ?78 to 40 °C. The central metals and amido groups had a significant effect on the polymerization activity. The increasing activity of central metals and amido groups was Yb < Er < Y and NPh₂ < N(i‐Pr)₂ < NC₅H₁₀, respectively. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 612–616, 2002; DOI 10.1002/pola.10141     

Eine neue Synthese von Tetrachlordiphosphan sowie Untersuchungen zur 1,2-Addition an Cycloalkene

A New Synthesis of Tetrachlorodiphosphane and Investigations Concerning the 1,2-Addition to Cycloalkenes . The phosphorus subhalide P₂Cl₄ has been synthesized by co-condensation of PCl₃ and Cu vapour in 14% yield. The ³¹P-NMR chemical shift of P₂Cl₄ has the value of δ=155. P₂Cl₄ decomposes during several hours at 0°C in a N₂ atmosphere by a disproportionation process to yield PCl₃ and a yellow polymeric compound of the approximately composition (PCl)_x. P₂Cl₄ is flammable in air to give POCl₃ and (PCl)_x. Investigations regarding the addition of P₂Cl₄ to cyclooctyne, cyclohexene, and cyclohexa-1,4-diene has been carried out. Surprisingly, cyclooctyne does not react with P₂Cl₄ but cyclohexene as well as cyclohexa-1,4-diene undergo 1,2-addition to yield the trans-1,2-bis(dichlorophosphino) substituted carbonhydrides. By derivatization with Me₃Si—NMe₂ the corresponding trans-1,2-bis[bis(dimethylamino)phosphino] compounds are synthesized.     

1,1,3,3,5,5-Hexakis(dimethylamino)-λ5-[1,3,5]triphosphinin – Darstellung,Kristallstruktur und NMR-Daten

1,1,3,3,5,5-Hexakis(dimethylamino)-λ⁵-[1,3,5]triphosphinine – Synthesis, Crystal Structure, and NMR Data Preparation of 1,1,3,3,5,5-hexakis(dimethylamino)-λ⁵-[1,3,5]triphosphinine ( 4 ) and the path of its formation from methyl-bis(dimethylamino)difluorophosphorane ( 1 ) and n-butyllithium are described. The chemical behaviour of compounds of type [R₂P=CH–]_n is compared with that of the isoelectronic dichlorophosphazenes [Cl₂P=N–]_n. The structure of 4 is eludicated by n.m.r. spectra and X-ray structural analysis.     

Synthesis of substituted 1,2-di(alkylsulfonyl)indolizines. Molecular and crystal structure of 3-(4-fluorobenzoyl)-6-methyl-1,2-di(propylsulfonyl)indolizine

The reactions of substituted pyridinium salts with E-1,2-di(alkylsulfonyl)-1,2-dichloroethenes proceed regiospecifically. Heating of these reagents in chloroform in the presence of a threefold excess of Et₃N affords substituted 1,2-di(alkylsulfonyl)indolizines in high yields. The structures of the reaction products were confirmed by physicochemical methods, including X-ray diffraction. Dedicated to Academician N. K. Kochetkov on the occasion of his 90th birthday. __________ Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1205–1209, May, 2005.