Adsorption of phenol from water by N-butylimidazolium functionalized strongly basic anion exchange resin

N-butylimidazolium functionalized strongly basic anion exchange resin with Cl(-) anion (MCl) was prepared by anchoring N-butylimidazole onto chloromethylated macroporous styrene-divinylbenzene (St-DVB) copolymer. The adsorption performances of phenol on MCl were studied using the batch technique at acidic and alkaline pH. The studies showed that phenol can be effectively removed at both acidic and alkaline pH. The maximum adsorption was achieved at about pH 11. The maximum adsorption capacities of phenol on MCl at pH 6.6 and 11.2 were 80.2 and 92.9 mg/g, respectively. The adsorption mechanism was mainly molecular adsorption at acidic pH and anion exchange at alkaline pH. The adsorption of phenol was hindered by the presence of Cl(-) and SO(4)(2-) at alkaline pH due to the competitive anion exchange reaction. The adsorption of molecular phenol species on MCl at acidic pH was exothermic, and the anion exchange of phenolate species by MCl at alkaline pH was endothermic. Desorption of phenol from loaded adsorbent was achieved by using 0.5 mol/L NaOH and 0.5 mol/L NaCl mixed solution. MCl can simultaneously remove phenol and Cr(VI) from their mixtures, which would be of practical value in actual industrial wastewater treatment.     

Adsorption of metal halides from ethanol solutions by a 3-n-propylpyridiniumsilsesquioxane chloride-coated silica gel surface

3-n-propylpyridiniumsilsesquioxane chloride polymer, abbreviated as SiPy+Cl-, was used to coat a porous silica gel, SiO2, surface to form the chemically modified solid SiO2/SiPy+Cl-. The resulting polymer film was well adhered to the surface and presented an ion exchange capacity of 0.74 mmol g(-1). Metal halides, MClz [M=Fe(III), Cu(II), and Zn(II)], were adsorbed by the modified solid from ethanol solutions as neutral species by forming the surface anionic complexes described by the equation: mSiO2/SiPy+Cl-+ MClz <=> (SiO2/SiPy+)m[MCl(z+m)]m-, where the [MCl(z+m)]m- species adsorbed on the surface are FeCl4-, ZnCl4(2-), and CuCl4(2-). Accurate estimates of the specific sorption capacities and the heterogeneous stability constants of the immobilized metal complexes were determined with the aid of computational procedures.     

Lewis base mediated autoionization of GeCl2 and SnCl2

Cationic and anionic species of heavier low-valent group 14 elements are intriguing targets in main group chemistry due to their synthetic potential and industrial applications. In the present study, we describe the synthesis of cationic (MCl(+)) and anionic (MCl(3)(-)) species of heavier low-valent group 14 elements of germanium(II) and tin(II) by using the substituted Schiff base 2,6-diacetylpyridinebis(2,6-diisopropylanil) as Lewis base (LB). Treatment of LB with 2 equiv of GeCl(2)·dioxane and SnCl(2) in toluene gives compounds [(LB)Ge(II)Cl](+)[Ge(II)Cl(3)](-) (1) and [(LB)Sn(II)Cl](+)[Sn(II)Cl(3)](-) (2), respectively, which possess each a low-valent cation and an anion. Compounds 1 and 2 are well characterized with various spectroscopic methods and single crystal X-ray structural analysis.     

Synthesis and structure of (Ph4P)2MCl6 (M = Ti, Zr, Hf, Th, U, Np, Pu)

High-purity syntheses are reported for a series of first, second, and third row transition metal and actinide hexahalide compounds with equivalent, noncoordinating countercations: (Ph(4)P)(2)TiF(6) (1) and (Ph(4)P)(2)MCl(6) (M = Ti, Zr, Hf, Th, U, Np, Pu; 2-8). While a reaction between MCl(4) (M = Zr, Hf, U) and 2 equiv of Ph(4)PCl provided 3, 4, and 6, syntheses for 1, 2, 5, 7, and 8 required multistep procedures. For example, a cation exchange reaction with Ph(4)PCl and (NH(4))(2)TiF(6) produced 1, which was used in a subsequent anion exchange reaction with Me(3)SiCl to synthesize 2. For 5, 7, and 8, synthetic routes starting with aqueous actinide precursors were developed that circumvented any need for anhydrous Th, Np, or Pu starting materials. The solid-state geometries, bond distances and angles for isolated ThCl(6)(2-), NpCl(6)(2-), and PuCl(6)(2-) anions with noncoordinating counter cations were determined for the first time in the X-ray crystal structures of 5, 7, and 8. Solution phase and solid-state diffuse reflectance spectra were also used to characterize 7 and 8. Transition metal MCl(6)(2-) anions showed the anticipated increase in M-Cl bond distances when changing from M = Ti to Zr, and then a decrease from Zr to Hf. The M-Cl bond distances also decreased from M = Th to U, Np, and Pu. Ionic radii can be used to predict average M-Cl bond distances with reasonable accuracy, which supports a principally ionic model of bonding for each of the (Ph(4)P)(2)MCl(6) complexes.     

Platinum(II) and palladium(II) complexes of bisphosphine ligands bearing o-N,N-dimethylanilinyl substituents: a hint of catalytic olefin hydration

Platinum(II) and palladium(II) complexes of the potentially hexadentate P,N-donor ligand family Ar2P-X-PAr2 (X = (CH2)2 [dmape], cyclic-C5H8 [dmapcp]; Ar = o-N,N-dimethylanilinyl) are described. In CH2Cl2, the dmape complexes exist as equilibrium mixtures of MCl2(P,P'-dmape) and [MCl(P,P',N-dmape)]Cl isomers (M = Pd, Pt), governed by deltaH(o) = -19 +/- 4 kJ mol(-1) and deltaS(o) = -100 +/- 30 J mol(-1) K(-1) for M = Pt, and deltaH(o) = -11 +/- 7 kJ mol(-1) and deltaS(o) = -60 +/- 20 J mol(-1) K(-1) for M = Pd. The water-soluble dmapcp complexes exist solely in the [MCl(P,P',N-dmapcp)]Cl form, but the free and coordinated anilinyl rings in these complexes are in slow diastereoselective exchange. X-ray crystal structures for MCl2(P,P'-dmape) (M = Pd, Pt), and the [PdCl(P,P',N-dmape)]+ and [PtCl(P,P',N-dmapcp)]+ cations, are presented. Some of the complexes show marginal activity in water for the catalyzed hydration of maleic to malic acid, giving about 6-7% conversion in 24 h at 100 degrees C and substrate:catalyst loadings of 100:1. Attempts to synthesize a PdCl(P,P',N-dmapm)+ species led instead to isolation of [Pd(mu-Cl)(P,P'-dmapm)]2[PF6]2 (dmapm = Ar2PCH2Ar2).     

Mono{hydrotris(mercaptoimidazolyl)borato} complexes of manganese(II), iron(II), cobalt(II), and nickel(II) halides

A series of [Tm(Me)M(mu-Cl)]2 and Tm(R)MCl (Tm(R) = tris(mercaptoimidazolyl)borate; R = Me, tBu, Ph, 2,6-iPr2C6H3 (Ar); M = Mn, Fe, Co, Ni) complexes have been prepared by treatment of NaTm(Me) or LiTm(R) with an excess amount of metal(II) chlorides, MCl2. Treatment of Tm(R)MCl (R = tBu, Ph, Ar) with NaI led to a halide exchange to afford Tm(R)MI. The molecular structures of [Tm(Me)M(mu-Cl)]2 (M = Mn, Ni), [Tm(Me)Ni(mu-Br)]2, Tm(tBu)MCl (M = Fe, Co), Tm(Ph)MCl (M = Mn, Fe, Co, Ni), Tm(Ar)MCl (M = Mn, Fe, Co, Ni), Tm(Ph)MI (M = Mn, Co), and Tm(Ar)MI (M = Fe, Co, Ni) have been determined by X-ray crystallography. The Tm(R) ligands occupy the tripodal coordination site of the metal ions, giving a square pyramidal or trigonal bipyramidal coordination geometry for Tm(Me)M(mu-Cl)]2 and a tetrahedral geometry for the Tm(R)MCl complexes, where the S-M-S bite angles are larger than the reported N-M-N angles of the corresponding hydrotris(pyrazolyl)borate (Tp(R)) complexes. Treatment of Tm(Ph)2Fe with excess FeCl2 affords Tm(Ph)FeCl, indicating that Tm(R)2M as well as Tm(R)MCl is formed at the initial stage of the reaction between MCl2 and the Tm(R) anion.     

Single-source materials for metal-doped titanium oxide: syntheses, structures, and properties of a series of heterometallic transition-metal titanium oxo cages

Titanium dioxide (TiO(2)) doped with transition-metal ions (M) has potentially broad applications in photocatalysis, photovoltaics, and photosensors. One approach to these materials is through controlled hydrolysis of well-defined transition-metal titanium oxo cage compounds. However, to date very few such cages have been unequivocally characterized, a situation which we have sought to address here with the development of a simple synthetic approach which allows the incorporation of a range of metal ions into titanium oxo cage arrangements. The solvothermal reactions of Ti(OEt)(4) with transition-metal dichlorides (M(II)Cl(2), M = Co, Zn, Fe, Cu) give the heterometallic transition-metal titanium oxo cages [Ti(4)O(OEt)(15)(MCl)] [M = Co (2), Zn (3), Fe (4), Cu (5)], having similar MTi(4)(μ(4)-O) structural arrangements involving ion pairing of [Ti(4)O(OEt)(15)](-) anion units with MCl(+) fragments. In the case of the reaction of MnCl(2), however, two Mn(II) ions are incorporated into this framework, giving the hexanuclear Mn(2)Ti(4)(μ(4)-O) cage [Ti(4)O(OEt)(15)(Mn(2)Cl(3))] (6) in which the MCl(+) fragments in 2-5 are replaced by a [ClMn(μ-Cl)MnCl](+) unit. Emphasizing that the nature of the heterometallic cage is dependent on the metal ion (M) present, the reaction of Ti(OEt)(4) with NiCl(2) gives [Ti(2)(OEt)(9)(NiCl)](2) (7), which has a dimeric Ni(μ-Cl)(2)Ni bridged arrangement arising from the association of [Ti(2)(OEt)(9)](-) ions with NiCl(+) units. The syntheses, solid-state structures, spectroscopic and magnetic properties of 2-7 are presented, a first step toward their applications as precursor materials.     

Arene-mercury complexes stabilized by aluminum and gallium chloride: catalysts for H/D exchange of aromatic compounds

Dissolution of Hg(arene)(2)(MCl(4))(2) [arene = C(6)H(5)Me, C(6)H(5)Et, o-C(6)H(4)Me(2), C(6)H(3)-1,2,3-Me(3); M = Al, Ga] in C(6)D(6) results in a rapid H/D exchange and the formation of the appropriate d(n)-arene and C(6)D(5)H. H/D exchange is also observed between C(6)D(6) and the liquid clathrate ionic complexes, [Hg(arene)(2)(MCl(4))][MCl(4)], formed by dissolution of HgCl(2) and MCl(3) in C(6)H(6), m-C(6)H(4)Me(2), or p-C(6)H(4)Me(2). The H/D exchange reaction is found to be catalytic with respect to Hg(arene)(2)(MCl(4))(2) and independent of the initial arene ligand. Reaction of a 1:1 ratio of C(6)H(5)Me and C(6)D(6) with <0.1 mol % Hg(C(6)H(5)Me)(2)(MCl(4))(2) results in an equilibrium mixture of all isotopic isomers: C(6)H(5-x)D(x)Me and C(6)D(6-x)H(x) (x = 0-5). DFT calculations on the model system, Hg(C(6)H(6))(2)(AlCl(4))(2) and [Hg(C(6)H(6))(2)(AlCl(4))](+), show that the charge on the carbon and proton associated with the shortest Hg...C interactions is significantly higher than that on uncomplexed benzene or HgCl(2)(C(6)H(6))(2). The protonation of benzene by either Hg(C(6)H(6))(2)(AlCl(4))(2) or [Hg(C(6)H(6))(2)(AlCl(4))](+) was calculated to be thermodynamically favored in comparison to protonation of benzene by HO(2)CCF(3), a known catalyst for arene H/D exchange. Arene exchange and intramolecular hydrogen transfer reactions are also investigated by DFT calculations.     

Sorption and permeation behaviour of metal thiocyanate complexes on cellulose acetate polymers

Various metal thiocyanate complexes in aqueous solution were sorbed on solid cellulose acetate polymers. The sorption selectivity increased in the order Zn(2+) > Fe(3+) > Cu(2+) > Co(2+) > Ni(2+). The sorption behaviour followed a Langmuir-type adsorption isotherm, and the maximum adsorption capacity was 6.1 x 10(-5) mole of complex per g of polymer under optimum conditions. The zinc species sorbed appear to be NH(4)Zn(H(2)O)(SCN)(3) or (NH(4))(2)Zn(SCN)(4) according to analysis of the sorption equilibrium. The ion-association species formed by the complex zinc anion and the ammonium ion was supposed to be sorbed (or "extracted") onto the polymer matrix. As an application of sorption of metal complexes, a new hyperfiltration process was proposed for selective separation of metal ions. Thus, a mixture of metal thiocyanate complexes was hyperfiltered through cellulose acetate membranes. Permeation of certain metal complexes was preferred, and the selectivity was found to be similar to the sorption selectivity. These findings lead to a generalized idea that hyperfiltration separation of ionic species, particularly anionic metal complexes, can be attained by using polymer membranes which selectively adsorb or extract such ionic species as ion-association complexes onto the polymer matrix.     

Modeling spin interactions in a cyclic trimer and a cuboidal Co4O4 core with Co(II) in tetrahedral and octahedral environments

The X-ray crystallographic structures, the magnetic susceptibilities from 2 to 300 K, and a theoretical analysis of the magnetism for a triangular and a tetranuclear molecule consisting of linked high-spin cobalt(II) centers are described. The interpretation of the magnetic data for the triangular compound [Co(depa)Cl](3) (depa is the anion of 2,2'-(bis-4-ethylpyridyl)amine), which has tetrahedrally coordinated Co(2+) ions, entails isotropic antiferromagnetic exchange interaction and antisymmetric exchange acting within the two low-lying spin doublets. Two strong isotropic ferromagnetic interactions have been modeled in the cuboidal compound Co(4)(DPM)(4)(CH(3)O)(4)(CH(3)OH)(4) (DPM represents the anion of dipivaloylmethane), which has octahedral coordination, and the system can be approximately considered as two weakly coupled S = 3 species.     

First systematic band-filling control in organic conductors

The systematic study of band-filling control for four kinds of organic conductors with various kinds of ground states has succeeded. (1) By partial substitution of (GaCl(4))(-) by (MCl(4))(2-) [M = Co, Zn] in the anion blocking layer of lambda-ET(2)(GaCl(4))(-) [ET = bis(ethylenedithio)tetrathiafulvalene], single crystals of lambda-ET(2)(GaCl(4))(-)(1-x)(MCl(4))(2-)(x) [x = 0.0, 0.05, 0.06] have been obtained. The resistivity at room temperature decreases from 3 Omega cm (x = 0.0) to 0.1 Omega cm (x = 0.06) by doping to the antiferromagnet with an effective half-filled band (x = 0.0). (2) Another 2:1 (donor/anion) salt, delta'-ET(2)(GaCl(4))(-), which is a spin gap material, has been doped as delta'-ET(2)(GaCl(4))(-)(1-x)(MCl(4))(2-)(x) [x = 0.05, 0.14]. The resistivity is lowered from 10 Omega cm (x = 0.0) to 0.3 Omega cm (x = 0.14). For both 2:1 salts, the semiconducting behaviors have transferred to relatively conductive semiconducting ones by doping. (3) As for alpha-type 3:1 salts, the parent material is in a charge-ordering state such as alpha-(ET(+)ET(+)ET(0))(CoCl(4))(2-)(TCE), where the charge-ordered donors are dispersed in the two-dimensional conducting layer. Although the calculation of alpha-ET(3)(CoCl(4))(2-)(TCE) shows a band-insulating nature, and the crystal structure analysis indicates that this material is in a charge-ordering state, the metallic behavior down to 165 K has been observed. With doping of (GaCl(4))(-) to the alpha-system, isostructural alpha-ET(3)(CoCl(4))(2-)(1-x)(GaCl(4))(-)(x)(TCE) [x = 0.54, 0.57, 0.62] have been afforded, where the pattern of the horizontal stripe-type charge ordering changes with an increase of x. (4) By doping (GaCl(4))(-) to the 3:2 gapless band insulator which is isostructural to beta'-ET(3)(MCl(4))(2)(2-) [M = Zn, Mn], the obtained beta'-ET(3)(CoCl(4))(2-)(2-x)(GaCl(4))(-)(x) [x = 0.66, 0.88] shows metallic behavior down to 100 and 140 K, respectively. They are the first metallic states in organic conductors by band-filling control of the gapless band insulator. These systematic studies of band-filling control suggest that the doping to the gapless band insulator with a pseudo-1/2-filled band is most effective.     

On-line separation for the speciation of mercury in natural waters by flow injection-cold vapour-atomic absorption spectrometry

Inorganic mercury and methylmercury are determined in natural waters by injecting the filtered samples onto a low cost commercial flow injection system in which an anion exchange microcolumn is inserted after the injection loop (FIA-IE). If hydrochloric acid is used as the carrier solution, the HgCl4(2-) species (inorganic mercury) will be retained by the anion exchanger while the CH3HgCI species (methylmercury) will flow through the resin with negligible retention. Four anion exchangers and seven elution agents were checked, in a batch mode, to search for the best conditions for optimal separation and elution of both species. Dowex M-41 and L-cysteine were finally selected. Mercury detection was performed by cold vapour-electrothermal atomic adsorption spectrometry (HG-ETAAS). Both systems were coupled to perform the continuous on-line separation/detection of both inorganic mercury and methylmercury species. Separation and detection conditions were optimized by two chemometric approaches: full factorial design and central composite design. A limit of detection of 0.4 microg L(-1) was obtained for both mercury species (RSD < 3.0% for 20 microg L(-1) inorganic and methylmercury solutions). The method was applied to mercury speciation in natural waters of the Nerbioi-lbaizabal estuary (Bilbao, North of Spain) and recoveries of more than 95% were obtained.     

Photoelectron spectroscopy of anions at 118.2 nm: observation of high electron binding energies in superhalogens MCl4- (M=Sc, Y, La)

High energy photon is needed for photoelectron spectroscopy (PES) of anions with high electron binding energies, such as superhalogens and O-rich metal oxide clusters. The highest energy photon used for anion PES in the laboratory has been 157 nm (7.866 eV) from F2 eximer lasers. Here, we report an anion PES experiment using coherent vacuum ultraviolet radiation at 118.2 nm (10.488 eV) by tripling the third harmonic output (355 nm) of a Nd:YAG laser in a XeAr cell. Our study focuses on a set of superhalogen species, MCl(4) (-) (M=Sc, Y, La), which were expected to possess very high electron binding energies. While the 157 nm photon can only access the ground state detachment features for these species, more transitions to the excited states at binding energies higher than 8 eV are observed at 118.2 nm. The adiabatic detachment energies are shown to be, 6.84, 7.02, and 7.03 eV for ScCl(4) (-), YCl(4) (-), and LaCl(4) (-) eV, respectively, whereas their corresponding vertical detachment energies are measured to be 7.14, 7.31, and 7.38 eV.     

Ion Exchange Separation of Platinum and Palladium by Nucleophilic Displacement With Thiocyanate or Thiourea1,2

The separation of platinum and palladium, by adsorption onto weak base anion exchange resins, Amberlite XE 299, or ionex (derived from Amberlite XE-305) from 1M hydrochloric acid, followed by ligand substitution with sulfur nucleophiles is described.

In the thiourea system, cationic thiourea complexes are produced, which cannot be readsorbed into the resin. In the thiocyanate system the formation of Pd(SCN)₄ ^2- is favored in both solution and polymer phases. The Pd(SCN)₄ ^2-. readsorption into the anion exchange resin is the basis for the separation of platinum from palladium.     

叔丁基取代的环戊二烯基钛、锆、铪二氯化物的合成及催化乙烯聚合

(tBuC5H4 ) 2 MCl2 (M =Ti(1a) ,Zr(1b) ,Hf(1c) )和 (tBu2 C5H3 ) 2 MCl2 (M =Ti(2a) ,Zr(2b) ,Hf(2c) )可以通过单叔丁基环戊二烯基锂或双叔丁基环戊二烯基锂与MCl4 (M =Ti,Zr,Hf)在四氢呋喃中反应制备得到 ,用IR、1H NMR和EI MS对这些化合物进行了表征 .采用X光单晶结构分析测定了 (tBuC5H4 ) 2 HfCl2 的晶体结构 .六个化合物均具有一定的催化乙烯聚合活性     

Co3(RL)2(hfac)6 ladder complex of 5-[4-(N-tert-butyl-N-aminoxyl)phenyl]pyrimidine

5-[4-(N-tert-butyl-N-aminoxyl)phenyl]pyridimine (4NITPhPyrim = RL) forms a 1-D ladder polymer complex with Co(hfac)2 of stoichiometry Co3(RL)2(hfac)6, having antiparallel [Co(II)RL]n linear chains (rails) that are cross-linked by Pyrim-Co(hfac)2-Pyrim rungs. The magnetic behavior above 100 K is consistent with contributions from one high-spin Co(II) ion (the cross-link, S = 3/2) plus two Co-ON units with strongly antiferromagnetic (AFM) metal-radical exchange (each S = 1). The chiT data show an AFM downturn as the temperature drops. Assuming weak exchange along chain portions of the polymer due to poor spin polarization across the phenyl-pyrimidine bond in RL, a linear three-spin (S = 1, 3/2, and 1) fit to the T > 18 K data yields an AFM cross-linker (rung) effective exchange of J(CL)/k = (-)5.3 K = (-)3.7 cm(-)(1). Superexchange (sigma-orbital overlap) is a likely mechanism for the effective AFM exchange between CoON and Co spin sites in the three-spin groupings.     

Zirconium and hafnium complexes containing bidentate diarylamido-phosphine ligands

The first examples of mononuclear, structurally characterized triarylphosphine complexes of zirconium and hafnium are reported. The metathetical reactions of MCl4(THF)2 (M = Zr, Hf) with [iPrNP]Li(THF)2 ([iPrNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-diisopropylanilide) or [MeNP]Li(THF)2 ([MeNP]- = N-(2-(diphenylphosphino)phenyl)-2,6-dimethylanilide) in toluene at -35 degrees C produced the corresponding [iPrNP]MCl3(THF) and [MeNP]2MCl2, respectively, in high yield. In contrast, attempts to prepare [MeNP]MCl3(THF) and [iPrNP]2MCl2 led to the concomitant formation of mono- and bis-ligated complexes, from which purification proved rather ineffective. The solution and solid-state structures of [iPrNP]MCl3(THF) and [MeNP]2MCl2 were studied by multinuclear NMR spectroscopy and X-ray crystallography. The geometry of these six-coordinate complexes is best described as a distorted octahedron in which the chloride ligands in [iPrNP]MCl3(THF) adopt a virtually meridional coordination mode whereas those in [MeNP]2MCl2 are trans to each other.     

H/D isotopic exchange in water interactions with the ferroelectric copolymer: Poly(vinylidene fluoride-trifluoroethylene) (70%:30%)

For both water and heavy water adsorption and absorption on crystalline poly(vinylidene fluoride with trifluoroethylene (30%)), P(VDF-TrFE 70:30), two distinctly different adsorption sites have been identified by thermal desorption spectroscopy. One adsorbed water species resembles ice and there is also an absorbed water species that interacts more strongly with the polymer thin film, and in addition, there is a polymer surface (polymer to ice interface) water species. We find that there is H/D exchange between the water or heavy water molecules and the ferroelectric polymer (largely -(CH2-CF2)-), particularly at the polymer surface.     

Isostructural metal-anion radical coordination polymers with tunable phosphorescent colors (deep blue, blue, yellow, and white) induced by terminal anions and metal cations

Five phosphorescent metal-anion radical coordination polymers based on a new anion radical ligand generated by in situ deprotonation of a stable zwitterionic radical are described. The N,O,N-tripodal anion radical ligand links metal cations, which leads to five isostructural coordination polymers, [M(3)(bipo(-.))(4)(L)(2)](n) (M=Cd or Mn, Hbipo(-.)=2,3'-biimidazo[1,2-a]pyridin-2'-one, L=Cl(-), HCOO(-) or SCN(-)). The isostructural coordination polymers exhibit novel one-dimensional spirocycle-like structures. Three isostructural Cd(II) coordination polymers display unusual phosphorescent color changes (blue, yellow, and white) induced by terminal anions. Significantly, the Cd(II) coordination polymer with terminal Cl(-) possesses moderate quantum yield, and shows a bright white-light phosphorescence emission, which is independent of excitation wavelength and can even be excited by visible light. Upon adjusting the metal cation to Mn(II), two isostructural Mn(II) coordination polymers reveal deep-blue-light phosphorescence emissions that are independent of terminal anions. As radical-based coordination polymers, some of them show antiferromagnetic interactions between radical species or radical and metal center.     

Molybdenum-Containing polysalts of the poly[ferricene-1,2(1,3:1,1′)diyl-methylene] cation

Poly(ferricene-1,2(1,3:1,1′)diyl-methylene) polycations, generated from the neutral precursor polymer 1 (M?_n=2800) by dioxygen (O₂) oxidation in sulfuric acid medium, are paired first, in a model reaction, with the hexafluorophosphate anion and, in the principal series of experiments, with the two molybdenum-containing complex anions, octamolybdate and phosphododecamolybdate. The model poly(hexafluorophosphate) 2b, as well as the polymolybdates 2c and 2d, precipitate from aqueous acidic solution of the corresponding polysulfate 2a after anion exchange; scopically. In addition to the hexafluorophosphate anion, the model polysalts 2b contain small proportions, typically 5-15%, of sulfate anion (probably present as HSO), indicating incompleteness of the anion exchange process. Analytical data suggest similarly incomplete exchange of anions also for the polymolybdates 2c and 2d. Oxidation of ferrocene units along the polymer chain is practically complete in the great majority of polysalts 2 synthesized. The molybdenum-containing polymers are of interest as plant micronutrients possessing slow-release properties.