金属纳米复合催化剂合成与应用的最新进展

随着纳米技术的发展,金属纳米复合材料由于其特殊的物理化学性质和潜在的催化应用受到越来越多的关注。本文系统地介绍了金属纳米复合催化剂最新的研究进展。首先,我们介绍了一些金属纳米复合催化剂的合成方法。其次,为了更好的优化催化剂的结构与催化活性的关系,并深入理解催化反应机理,我们讨论了金属纳米复合催化剂一些重要因素(包括粒子粒径、形貌、组成、载体或配体)对催化活性和选择性的影响。最后,我们进一步介绍了金属纳米复合催化剂在还原不饱和化学键中的应用(N=O,N≡C和C=O),同时还对金属纳米复合催化剂的发展方向进行了展望。     

分子筛限域金属纳米粒子及其氧化还原反应应用的研究进展

沸石分子筛是一类孔隙均匀、结晶度高、结构多样、比表面积大的材料,在催化、分离、吸附等方面得到了广泛的应用。沸石分子筛已被证明是金属纳米粒子(MNPs)的理想载体。金属纳米粒子@沸石分子筛催化剂不仅表现出优异的催化活性,而且具有较高的稳定性和择形催化性。此外,限域的金属纳米粒子与具有活性位点的纳米孔骨架的协同作用可以进一步提高复合催化剂的催化活性。金属纳米粒子@沸石分子筛催化剂由于具有较高的活性、择形性和热稳定性等优点,在工业相关应用中引起了人们的极大关注。本文综述了金属纳米粒子@沸石分子筛催化剂的研究进展,重点介绍了多种合成方法以及其在氢化和氧化反应中的应用进展。指出了金属纳米粒子@沸石分子筛催化剂领域存在的问题和挑战并对其未来发展进行展望。     

水凝胶/金属纳米粒子复合物的制备及其在催化反应中的应用

金属纳米粒子的表面效应使其在有机催化方面具有广阔的应用前景,但由于金属纳米粒子易团聚而降低了其催化活性,解决金属纳米粒子的团聚问题具有重要的实际意义。水凝胶具有三维网状结构和大量的功能基团,可用于金属纳米粒子催化剂的制备,有利于金属纳米粒子的分散与固定以及提高金属粒子的回收率与重复使用性。本文主要综述了水凝胶（天然水凝胶与合成水凝胶）负载金属纳米粒子复合物的制备及其催化性能的研究,对影响复合催化剂性能的因素进行总结,最后对其存在的问题和将来可能的发展方向进行展望。     

K-Ce改性类水滑石前驱体Co-M—Al复合氧化物催化分解N2O

采用共沉淀法制备不同组分类水滑石前驱体Co-M—Al和Co—M—Ce—Al（M=Zn,Ni,Cu）复合氧化物催化剂催化分解N2O．结果表明,Co—M—Al系列氧化物催化剂的催化活性Co—Ni-Al系列〉Co—Zn-Al系列〉Co—Cu-Al系列;CeO2添加使得催化剂催化活性进一步提高,N20分解温度T50和马0均下降80℃;继续负载碱金属K也使氧化物催化剂催化活性提高,N2O分解温度T50和T90下降约50℃.     

溶胶凝胶法制备CexCo2-xAlO4复合氧化物及其催化分解N2O

用柠檬酸-溶胶凝胶法制备了CexCo2-xAlO4系列复合氧化物和K2CO3改性催化剂,考察了复合氧化物组成、母液pH值、钾负载量对N2O催化剂活性的影响,用N2物理吸附、X射线衍射（XRD）、扫描电镜（SEM）、H2程序升温还原（H2-TPR）、O2程序升温脱附（O2-TPD）、X射线光电子能谱（XPS）等方法表征了催化剂结构。结果表明：用Ce取代Co2AlO4中部分Co制得的CexCo2-xAlO4复合氧化物催化活性有所提高,其中母液pH=2、组成为Ce0.05Co1.95AlO4的催化剂活性较高,该催化剂具有较高的比表面积、较小的晶粒及Ce-Co间的协同效应;进一步研究表明,由于K粒子的电子效应,使得0.05K/Ce0.05Co1.95AlO4的催化活性又优于其他催化剂,有氧气氛中450C连续反应50h,N2O分解率达98.5%。     

N2O的催化分解研究

N2O是主要的温室气体之一,它在对流层中具有破坏臭氧的作用,因此,N2O的消除越来越引起人们的重视。N2O的直接催化分解是公认的消除N2O污染的最有前景的方法之一,具有操作简单、成本低、不需引入其他杂质、不产生二次污染等特点。本文综述了近年来在N2O催化分解领域广受关注的几类催化剂的最新研究进展,包括金属氧化物催化剂、负载型贵金属催化剂和分子筛催化剂体系,概括了这些催化剂的优点和缺点,介绍了固体催化剂表面N2O催化分解的反应动力学、分子模拟及反应机理。从工业应用角度出发综述了工业生产过程中可能对催化活性造成影响的NOx、O2、H2O和SO2等其他气体对催化剂活性、寿命和稳定性的影响。最后指出了N2O催化分解理论研究及催化剂体系存在的一些问题,并在此基础上对N2O催化分解体系的发展前景进行了展望。     

聚合物负载金属纳米粒子型核壳结构催化剂的研究

核壳结构聚合物负载型催化剂因其载体材料独特的结构、形貌和性质而具有优异的催化活性,成为了催化化学领域研究的热点。本文综述了聚合物负载金属纳米粒子型核壳结构催化剂,包括球形聚合物刷负载金属纳米粒子、聚合物中空微球负载金属纳米粒子、聚合物实心微球表面包覆金属纳米粒子等类型催化剂的制备及其相应的催化性能,强调了各类载体的组成和结构特点对催化活性及其稳定性的影响。最后总结了该类催化材料的优势和不足,并对其性能和应用进行了展望。     

金属/金属氧化物纳米粒子在不对称氢化和氢转移反应中的应用研究进展

近年来,金属/金属氧化物纳米粒子催化的不对称氢化和氢转移反应已经成为催化领域的前沿和研究热点之一. 金属/金属氧化物纳米粒子的催化模式类似于“纳米反应器”,底物可以通过有机包覆层扩散至催化中心,局部的高催化剂浓度通常可以极大地提高催化反应转换数（TON）和转化频率（TOF）. 在以纳米金属为催化活性中心方面,Orito纳米铂体系获得最多的关注,科学家们从手性修饰剂的结构改造、催化剂载体的选择、不同的反应介质、纳米催化剂的形貌和催化反应机理等方面开展了较为系统的研究,并取得重要进展. 此外,纳米钯、铑、钌、铱和铁等金属纳米催化剂也在烯烃、酮和亚胺等化合物的不对称氢化和氢转移反应中表现出良好的催化性能,特别是纳米铱和铁催化剂已获得95%以上的对映选择性. 在金属/金氧化物纳米粒子为催化剂载体方面,其催化不对称氢化及氢转移反应的效率及对映选择性可与均相催化剂相媲美,同时还解决了均相催化剂难于回收再循环的缺陷. 本文简要介绍了近年来手性金属纳米催化剂在不对称氢化和氢转移反应领域的研究进展,讨论了相关反应的催化机理,并对该领域仍存在的问题和未来的发展方向进行了展望.     

原位合成无表面活性剂纳米钯用于催化氢转移反应合成偶氮类化合物及对不饱和双键的还原

以乙酰丙酮钯作为催化剂前体, 异丙醇作为氢源, 在碱性的反应过程中原位得到纳米尺度的钯纳米颗粒, 并进一步得到钯-氢活性结构, 实现硝基的还原及氮氮键的偶联. 该催化体系还可以实现C=C和C=O键的有效还原. 这类原位得到的钯纳米催化材料表面裸露, 因而具有更高的催化活性.     

镍催化构筑C(sp3)—C(sp3)键反应研究进展

过渡金属催化的偶联反应是构筑C-C键的高效方法,在有机合成中得到了广泛的应用.然而,相对于Heck反应、Negishi偶联与Suzuki偶联等构筑C（sp²）-C（sp²）键的反应,过渡金属催化的构筑C（sp³）-C（sp³）键的偶联反应较难进行,发展较晚.近年来,烷基-烷基C-C键偶联反应受到广泛的重视,一些高效催化剂被开发出来,其中镍催化剂展示出独特的催化活性和选择性.本文将综述镍催化烷基-烷基C-C键偶联反应最新研究进展,主要包括烷基亲电试剂与金属有机试剂交叉偶联反应、导向基参与的C（sp³）-H键活化的偶联反应、镍-光反应催化剂协同催化偶联反应、烷基亲电试剂与亲电试剂的还原偶联反应和镍催化烯烃加成反应等.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.