Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

High surface density immobilization of oligonucleotide on silicon

Oligonucleotide (11-mer) molecules are immobilized on silicon in high surface population using either a permanent thioether bond or a chemo-selectively reversible disulfide bond to the surface thiol functionality. Substrate hydroxy groups are first silanized with an 11 carbon trichlorosilane containing a terminal, protected thiol moiety. Oligonucleotide modified with a tether possessing a terminal thiol group is further derivatized with a water-soluble, halobenzylic bifunctional reagent, which allows the complete conjugate to be attached to the surface through a permanent thioether bond. Alternatively, the oligonucleotide-tether complex can be combined with a pyridyldisulfide compound, which, in turn, facilitates the formation of a reversible disulfide bond with surface thiol. The amount of immobilized oligonucleotide was determined by radiochemical labeling with 32P. Additional verification of surface amounts was obtained from X-ray photoelectron spectroscopic analysis of substrates. The results of the immobilization protocols are compared with the oligonucleotide surface population achieved through the conventional silanizing agent, mercaptopropyltrimethoxysilane. Finally, a preliminary confirmation of duplex formation of a TTU-attached 25-mer with its complementary strand is outlined.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1：1 的甲醇-水混合溶液在纳米碳管（CNT）中的静态结构以及输运行为. 研究发现：在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失. 另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

Sugar cane bagasse-lignin as photo-stabilizer for butadiene rubber

In this work we have studied the stabilizing effect of a natural antioxidant, sugar cane bagasse-lignin, on the photo-oxidation of a commercial sample of butadiene rubber. This stabilizer was investigated in various concentrations, in the pure form, and associated with a diamine or a phosphite stabilizer. Stabilization of butadiene rubber with this lignin associated with the diamine produced a material with a photo-chemical stability comparable to that of a stabilized commercial sample.     

四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Reaction of zirconacyclopentadienes with electrophiles such as benzaldehyde, methyl methacrylate and 1-bromo-2-butyne after treatment with RLi

Zirconacyclopentadienes reacted with electrophiles after treatment with alkyllithium. For example, the reaction with benzaldehyde after treatment with methyllithium to give a nucleophilic addition product of a dienyl moiety to aldehyde, dienylcarbinol, in a moderate yield. Similar reaction of a zirconacyclopentadiene using butyllithium with methyl methacrylate afforded a Michael addition product in a good yield. Treatment of zirconacyclopentadienes with n-BuLi followed by 1-bromo-2-butyne gave a mono-propargylated diene derivative in 95% yield after hydrolysis. When propargyl chloride was treated with n-BuLi first and then added to zirconacyclopentadienes, penta-substituted benzene derivatives were formed in high yields.     

Template synthesis of tungsten complexes with saturated N-heterocyclic carbene ligands

Tungsten complex with a coordinated 2-azidoethyl isocyanide ligand reacts with PMe3 at the azido function to give a complex with a coordinated iminophosphorane which upon hydrolysis of the P=N bond yields a complex with an NH,NH-stabilized N-heterocyclic carbene ligand, 7; alkylation of the carbene ring nitrogen atoms gives a complex with an N,N'-dialkylated imidazolidin-2-ylidene ligand, 8 .     

Biomolecular stress-sensitive gauges: surface-mediated immobilization of mechanosensitive membrane protein

We report the observation of structural reorganizations associated with unique, stress-assisted gating of mechanosensitive (MscL) membrane protein on a silicon surface modified with alkyl-terminated monolayers. We observed that the shape of MscL membrane proteins changed dramatically depending upon the packing density of alkyl tails and the surface tension of the supporting organic layer. High-resolution atomic force microscopy confirmed a transition from an elongated, prolate shape of MscL molecules within a monolayer with low surface tension to a flattened, oblate shape with a wide central opening within a monolayer with high surface tension. These observations are consistent with the conformation reorganizations associated with the two-stage, "iris"-like expansion proposed for the gating of the MscL molecules.     

Highly efficient synthesis of linear pyrrole oligomers by twofold Heck reactions

The twofold Heck reaction of the vinylpyrroles 3a and 3b with the iodobenzenes 4a-c led to the linear pyrrole oligomers 5, 6, and 7. The synthesis of both symmetrical and unsymmetrical oligomers, such as 10a and 10b, was also accomplished by a Heck reaction of 8 and 9 and by a Heck reaction of 3a and 11 followed by a Wittig reaction and a second Heck reaction with 8. The pentacyclic oligomers 14 and 19 were prepared by a twofold Heck reaction of 13 with 4 and by a twofold Heck reaction of 15 with 16 followed by a Wittig reaction and a twofold Heck reaction with 8.     

分子动力学模拟研究纳米碳管中甲醇-水混合溶液的结构与输运性质

利用分子动力学模拟方法,对比考察了平衡条件、外压作用、梯度电场作用下,摩尔比为1:1的甲醇-水混合溶液在纳米碳管(CNT)中的静态结构以及输运行为.研究发现:在平衡体系与外压作用下,纳米碳管内甲醇与水呈现出明显的不混溶现象,甲醇主要分布于管壁附近,水分子主要分布于纳米碳管轴心附近;而在梯度电场作用下,纳米碳管由疏水性向亲水性转变,更多的水分子分布于管壁,导致纳米碳管内甲醇-水的不混溶现象消失.另一方面,在外压作用下,纳米碳管内甲醇与水呈现单向移动;而在梯度电场下,甲醇与水呈现快速的双向移动,其流通量较相应外压作用体系高出近一个数量级,但由于双向的流通量大小相近,导致净流通量与外压作用下的净流通量差异不大.     

Zur reaktionvon cyclotri- und cyclotri- und cyclotetrasilazanen mit silylfluoriden

Fluorosilyl substituted cyclosilazanes are formed by treating lithium salts of hexamethylcyclotri- and octa-methylcyclotetrasilazanes with silicon tetrafluoride and organo-substituted silicon fluorides. Disubstituted compounds are obtained by the reaction of dilithium hexamethylcyclotrisilazane with silicon fluorides or by the reaction of lithium hexamethylcyclotrisilazane with silicon fluorides at higher temperature. Cyclosilazanes with bulky ligands react with butyllithium with elimination of butane as a first step and then react further with a silicon fluoride compound, with LiF-elimination, to give a mixed substituted cyclosilazane. Ring coupling through a silicon bridge is achieved by the reaction of a fluorosilyl-substituted cyclotrisilazane with lithium hexamethylcyclotrisilazane. The mass,¹H and¹⁹F NMR spectra of the compounds are reported.     

Lattice models of branched polymers with specified topologies

As a step towards understanding the thermodynamics of multi-branched polymer systems, we look at a lattice model of a uniform branched polymer with fixed topology interacting with a surface and ask for the free energy of the polymer as the number of monomers which compose the polymer goes to infinity. The conformations of a uniform branched polymer with fixed topology are modelled by embeddings of a graph in the simple cubic lattice. Rigorous results about this model are reviewed. The results suggest that large branched polymers in three dimensions interacting with a plane have the same free energy as large linear polymers interacting with a plane; the same is not true, however, for the corresponding two-dimensional problem where the polymer interacts with a line.     

Solid-phase synthesis of tetrahydro-beta-carbolines and tetrahydroisoquinolines by stereoselective intramolecular N-carbamyliminium Pictet-Spengler reactions

A solid-phase method for the synthesis of tri-, tetra-, and pentacyclic compounds containing tetrahydro-beta-carboline, tetrahydroisoquinoline or analogous scaffolds is presented. The reaction proceeds with high stereoselectivity through an intermediate N-carbamyliminium ion that exclusively converts into Pictet-Spengler-type products with a variety of C-nucleophiles. Amino aldehydes masked with 3-Boc-(1,3)-oxazinane (Box) have been synthesized from amino acids, amino alcohols, or 2-nitro benzaldehydes. The amino moiety of these masked aldehydes has been converted into pentafluorophenyl carbamate to serve as a urea precursor. The building blocks were incorporated at the N-terminal of a resin-supported dipeptide through urea formation. Subsequent treatment with acid liberated the aldehyde quantitatively. A penultimate tryptophan residue gave rise, under the acetic conditions, to a spontaneous intramolecular Pictet-Spengler reaction with the liberated aldehyde. The reaction proceeded with a high degree of stereoselectivity affording tetrahydro-beta-carbolines with a de (de=diastereomeric excess) above 95 % and purity in the range of 90-99 %. This reaction has been extended to a range of other aromatic C-nucleophiles, including substituted indoles, benzenes, pyrene, furan, thiophenes, and benzothiophene with comparable stereoselectivity and purity. Prolonged exposure of the benzaldehyde-derived Pictet-Spengler products to strong acid and air lead to quantitative auto-oxidation which yielded compounds with a 3,4-dihydro-beta-carboline, a 3,4-dihydroisoquinoline, or a similar core structure.     

Spatial self-organization of comb macromolecules

The properties and the self-assembly of single comb macromolecules in solution were studied. The elastic properties of a polymer chain with a high density of side chains forming a cylindrical brush were discussed, in particular, its persistence length was calculated. The cases of brushes with flexible and rigid side chains, as well as brushes with two types of incompatible side segments, were considered. It was shown that brushes with rodlike dangling chains have a higher rigidity. In addition, a comb macromolecule with the hydrophobic main chain and hydrophilic side chains was considered. Such a macromolecules in a selective solvent forms a globule with the hydrophobic core and a soluble shell. The specific feature of the globule is its ability to acquire nonspherical spatial forms. Problems related to the stability and transformation of globule shape are discussed in detail.     

Low-bandgap donor-acceptor conjugated polymer sensitizers for dye-sensitized solar cells

A set of two donor-acceptor type conjugated polymers with carboxylic acid side groups have been synthesized and utilized as active materials for dye-sensitized solar cells (DSSCs). The polymers feature a π-conjugated backbone consisting of an electron-poor 2,1,3-benzothiadiazole (BTD, acceptor) unit, alternating with either a thiophene-fluorene-thiophene triad (2a) or a terthiophene (3a) segment as the donor. The donor-acceptor polymers absorb broadly throughout the visible region, with terthiophene-BTD polymer 3a exhibiting an absorption onset at approximately 625 nm corresponding to a ～1.9 eV bandgap. The polymers adsorb onto the surface of nanostructured TiO(2) due to interaction of the polar carboxylic acid units with the metal oxide surface. The resulting films absorb visible light strongly, and their spectra approximately mirror the polymers' solution absorption. Interestingly, a series of samples of 3a with different molecular weight (M(n)) adsorb to TiO(2) to an extent that varies inversely with M(n). DSSCs that utilize the donor-acceptor polymers as sensitizers were tested using an I(-)/I(3)(-) electrolyte. Importantly, for the set of polymer sensitizers 3a with varying M(n), the DSSC efficiency varies inversely with M(n), a result that reflects the difference in adsorption efficiency observed in the film absorption experiments. The best DSSC cell tested is based on a sample of 3a with M(n) ～ 4000, and it exhibits a ～65% peak IPCE with J(sc) ～12.6 mA cm(-2) under AM1.5 illumination and an overall power conversion efficiency of ～3%.     

Kinetics and mechanism of the aminolysis of methyl 4-nitrophenyl,methyl 2,4-dinitrophenyl,and phenyl 2,4-dinitrophenyl carbonates

The reactions of methyl 4-nitrophenyl carbonate (MNPC) with a series of secondary alicyclic amines (SAA) and quinuclidines (QUIN), methyl 2,4-dinitrophenyl carbonate (MDNPC) with QUIN and 1-(2-hydroxyethyl)piperazinium ion (HPA), and phenyl 2,4-dinitrophenyl carbonate (PDNPC) with SAA are subjected to a kinetic investigation in aqueous solution, at 25.0 degrees C and an ionic strength of 0.2 M. By following spectrophotometrically the nucleofuge release (330-400 nm) under amine excess, pseudo-first-order rate coefficients (k(obsd)) are obtained. Plots of k(obsd) vs [amine] at constant pH are linear, with the slope (k(N)) being pH independent. The Br?nsted-type plot (log k(N) vs amine pK(a)) for the reactions of SAA with MNPC is biphasic with slopes beta(1) = 0.3 (high pK(a) region) and beta(2) = 1.0 (low pK(a) region) and a curvature center at pK(a)(0) = 9.3. This plot is consistent with a stepwise mechanism through a zwitterionic tetrahedral intermediate (T(+/-)) and a change in the rate-determining step with SAA basicity. The Br?nsted plot for the quinuclidinolysis of MNPC is linear with slope beta(N) = 0.86, in line with a stepwise process where breakdown of T(+/-) to products is rate limiting. A previous work on the reactions of SAA with MDNPC was revised by including the reaction of HPA. The Br?nsted plots for the reactions of QUIN and SAA with MDNPC and SAA with PDNPC are linear with slopes beta = 0.51, 0.48, and 0.39, respectively, consistent with concerted mechanisms. Since quinuclidines are better leaving groups from T(+/-) than isobasic SAA, yielding a less stable T(+/-), it seems doubtful that the quinuclidinolysis of PDNPC is stepwise, as reported.     

Alkaline fuel cells: Calculating and comparing overall currents of hydrophobized cathodes with thin regular-structure and thick stochastic-structure active layers

A concept of active hydrophobized active layers with regular structure is introduced. In these layers, a hydrophobizer takes part in the development of gas pores representing a set of straight identical rods (cylinders) uniformly distributed over the active layer and extended in a direction perpendicular to the cathode surface. An advantage of cathodes with a thin regular-structure active layer is the reproducibility of their characteristics and a low content of platinum catalyst (up to tenth and even hundredth fractions of mg/cm²). A comparison of current characteristics of thin (with the thickness of several tens of μm) active layers with a regular structure and thick (with the thickness of several hundreds of μm) with the stochastic distribution of the hydrophobizer (with randomly distributed polytetrafluoroethylene) is made. For a fuel cell with an alkaline electrolyte (7 M KOH at 60°C), calculations show that at potentials below 0.5 V (RHE), the cathodes with thin regularstructure active layers demonstrate higher overall currents as compared with cathodes covered with thick active layers with a stochastic structure. However, the opposite trend is observed at potentials above 0.5 V. To increase the current in cathodes with thin regular-structure active layers, it is possible to, first, increase the active layer thickness and, second, decrease the size of hydrophobizer grains in them.     

Electrochemical Detection Using an Engraved Microchip – Capillary Electrophoresis Platform

The present study describes a simple strategy to integrate electrochemical detection with an assembled microchip‐capillary electrophoresis platform. The electrochemical cell was integrated with a microfluidic device consisting of five plastic squares interconnected with fused silica capillaries, forming a four‐way injection cross between the separation channel and three side‐arms (each of 15 mm in length) acting as buffer/sample reservoirs. The performance of the system was evaluated using electrodes made with either carbon ink, carbon nanotubes, or gold and under different experimental conditions of pH, capillary length, and injection time. Using this system it was possible to separate the neurotransmitters dopamine and cathecol and to quantify phenol from a real sample using a linear calibration curve with a calculated LOD of 0.7 µM. A similar concept was applied to determine glucose, by including a pre‐reactor filled with beads modified with glucose oxidase (GOx). The latter system was used to determine glucose in a commercial sample, with a recovery of 95.2 %. Overall, the presented approach represents a simple, inexpensive, and versatile approach to integrate electrochemical detection with CE separations without requiring access to microfabrication facilities.     

Structural Features of the Algal Cell Determine Adhesion Behavior at a Charged Interface

We aimed to examine the effects of algal structural features on adhesion at a charged interface. Results showed that algae with a glycocalyx, and with a cellulose amphiesma adhered at a charged interface at species-specific potential ranges. Algae, encased with a calcite-encrusted theca, and with an organosilicate cell wall, did not adhere to the interface. These differences in the amperometrically determined adhesion behavior of algal cells are in agreement with reported cell mechanical properties. Critical interfacial tensions of adhesion show differences between the studied soft algal cells as a consequence of their distinct cell barrier structure, composition, and properties.     

Iptycene quinones: synthesis and structure

A practical and efficient method to synthesize iptycene quinones has been developed. As a result, a series of pentiptycene quinones 8-16 were conveniently synthesized by one-pot reaction of triptycene quinone 4 or 5 with anthracene 1 or its derivatives 2-3 in refluxing acetic acid in the presence of p-chloranil, followed by CAN oxidative demethylation. Similarly, a series of heptiptycene quinones 17-23 with U-shaped cavities were achieved with pentiptycene quinone 10 and triptycene diquinone 6 as precursors. Non-iptycene triquinones 24 with one tweezer-shaped cavity and 25 with two U-shaped cavities were synthesized by one-pot reactions of anthracene with pentiptycene triquinones 16a and 16b, respectively. Non-iptycene triquinone 26 with a dendritic structure was conveniently obtained by the reaction of anthracene with either pentiptycene diquinone 12 or triptycene triquinone 7. The structures of regioisomers 16a and 16b were determined by the single-crystal structure analysis of 16b. The structures of other regioisomers, including heptiptycene tetraquinones 19a/19b/19c and heptiptycene triquinones 23a/23b, were identified by comparative reactions.