NHC/Nickel(II)‐Catalyzed [3+2] Cross‐Dimerization of Unactivated Olefins and Methylenecyclopropanes

Cross‐dimerization of a methylenecyclopropane ( 1 ) and an unactivated alkene ( 2 ) with typical hydroalkenylation reactivity was observed for the first time by using a [NHC‐Ni(allyl)]BAr^F catalyst (NHC=N‐heterocyclic carbene). Results show that the C?C cleavage of 1 did not involve a Ni⁰ oxidative addition, which was crucial in former systems. Thus the method reported here emerges as a complementary method for attaining highly chemo‐ and regioselective synthesis of methylenecyclopentanes ( 3 ) with broad scope. An efficient NHC/Ni^II‐catalyzed rearrangement of 1 leads to the convergent synthesis of 3 in the presence of 2 .     

[(NHC)NiIIH]‐Catalyzed Cross‐Hydroalkenylation of Cyclopropenes with Alkynes: Cyclopentadiene Synthesis by [(NHC)NiII]‐Assisted C−C Rearrangement

A cross‐hydroalkenylation/rearrangement cascade (HARC), using a cyclopropene and alkyne as substrate pairs, was achieved for the first time by using new [(NHC)Ni(allyl)]BAr^F catalysts (NHC=N‐heterocyclic carbenes). By controlling the (NHC)Ni^IIH relative insertion reactivity with cyclopropene and alkyne, a broad scope of cyclopentadienes was obtained with highly selectively. The structural features of the new (NHC)Ni^II catalyst were important for the success of the reaction. The mild reaction conditions employed may serve as an entry for exploring (NHC)Ni^II‐assisted vinylcyclopropane rearrangement reactivity.     

Rhodium(I) and Silver(I) Complexes of 4, 5‐Dicyano‐1, 3‐dimesityl‐ and 4, 5‐Dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene

The new N‐heterocyclic carbene (NHC) precursors 4, ‐dicyano‐1, ‐dimesityl‐ ( 9 ) and 4, 5‐dicyano‐1, 3‐dineopentyl‐2‐(pentafluorophenyl)imidazoline ( 14 ) were synthesized. The structure of 9 could be determined by X‐ray crystallography. With the 2‐pentafluorophenyl‐substituted imidazolines 9 and 14 , the [AgCl(NHC)], [RhCl(COD)(NHC)], and [RhCl(CO)₂(NHC)] complexes [NHC = 4, 5‐dicyano‐1, 3‐dimesitylimidazol‐2‐ylidene ( 3 ) and 4, 5‐dicyano‐1, 3‐dineopentylimidazol‐2‐ylidene ( 4 )] were obtained. Crystal structures of [AgCl( 3 )] ( 15 ), [RhCl(COD)( 3 )] ( 17 ), [RhCl(COD)( 4 )] ( 18 ), and [RhCl(CO)₂( 3 )] ( 19 ) were solved and with the crystal data of 19 , the percent buried volume ( %V_bur) of 31.8(±0.1) % was determined for NHC 3 . Infrared spectra of the imidazolines 9 and 14 and of the complexes 15 – 20 were recorded and the CO stretching frequencies of complexes 19 and 20 were used to determine the Tolman electronic parameters of the newly obtained NHCs 3 (TEP: 2060 cm^–1) and 4 (TEP: 2061 cm^–1), thus proving that 1, 3‐substitution of maleonitrile‐NHCs does not have a significant effect for the high π‐acceptor strength of these carbenes.     

Construction of Quaternary Stereogenic Carbon Centers through Copper‐Catalyzed Enantioselective Allylic Cross‐Coupling with Alkylboranes

A combination of an in situ generated chiral Cu^I/DTBM‐MeO‐BIPHEP catalyst system and EtOK enabled the enantioselective S_N2′‐type allylic cross‐coupling between alkylborane reagents and γ,γ‐disubstituted primary allyl chlorides with enantiocontrol at a useful level. The reaction generates a stereogenic quaternary carbon center having three sp³‐alkyl groups and a vinyl group. This protocol allowed the use of terminal alkenes as nucleophile precursors, thus representing a formal reductive allylic cross‐coupling of terminal alkenes. A reaction pathway involving addition/elimination of a neutral alkylcopper(I) species with the allyl chloride substrate is proposed.     

Gold(III) π‐Allyl Complexes

Gold(III) π‐complexes have been authenticated recently with alkenes, alkynes, and arenes. The key importance of Pd^II π‐allyl complexes in organometallic chemistry (Tsuji–Trost reaction) prompted us to explore gold(III) π‐allyl complexes, which have remained elusive so far. The (P,C)Au^III(allyl) and (methallyl) complexes 3 and 3′ were readily prepared and isolated as thermally and air‐stable solids. Spectroscopic and crystallographic analyses combined with detailed DFT calculations support tight quasi‐symmetric η³‐coordination of the allyl moiety. The π‐allyl gold(III) complexes are activated towards nucleophilic additions, as substantiated with β‐diketo enolates.     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

1‐Silacyclopent‐2‐enes and 1‐silacyclohex‐2‐enes bearing functionally substituted silyl groups in 2‐positions. Novel electron‐deficient Si?H?B bridges

The reactions of alkyn‐1‐yl(vinyl)silanes R₂Si[C?C‐Si(H)Me₂]CH?CH₂ [R = Me (1a), Ph (1b)], Me₂Si[C?C‐Si(Br)Me₂]CH?CH₂ (2a), and of alkyn‐1‐yl(allyl)silanes R₂Si[C?C‐Si(H)Me₂]CH₂CH?CH₂ (R = Me (3a), R = Ph (3b)] with 9‐borabicyclo[3.3.1]nonane in a 1:1 ratio afford in high yield the 1‐silacyclopent‐2‐ene derivatives 4a, b and 5a, and the 1‐silacyclohex‐2‐ene derivatives 6a, b, respectively, all of which bear a functionally substituted silyl group in 2‐position and the boryl group in 3‐position. This is the result of selective intermolecular 1,2‐hydroboration of the vinyl or allyl group, followed by intramolecular 1,1‐organoboration of the alkynyl group. In the cases of 4a, b, potential electron‐deficient Si? H? B bridges are absent or extremely weak, whereas in 6a,b the existence of Si? H? B bridges is evident from the NMR spectroscopic data (¹H, ¹¹B, ¹³C and ²⁹Si NMR). The molecular structure of 4b was determined by X‐ray analysis. Copyright © 2005 John Wiley & Sons, Ltd.     

Total Synthesis and Stereochemical Revision of Phacelocarpus 2‐Pyrone A

The first total synthesis of phacelocarpus 2‐pyrone A is reported. The original natural compound was tentatively assigned (by NMR spectroscopy) as containing two cis‐alkenes and a trans‐vinyl ether connected to a 2‐pyrone ring motif. Our computational predictions indicated that a cis‐vinyl ether motif was equally feasible. Attempts to prepare the trans‐vinyl ether were met with no success. The all cis‐target compound was synthesised in nine steps, employing key regio‐ and stereoselective reactions including Au^I‐catalysed vinyl etherification, Wittig alkenylation and end‐game Stille macrocyclisation. Analysis of the NMR data enabled identification and confirmation of the correct structure of phacelocarpus 2‐pyrone A, containing a cis‐vinyl ether. Our studies pave the way for future development of methodologies to these structurally distinct pyrone skipped‐polyenyne natural products.     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

Structural Diversity of Copper(I)–N‐Heterocyclic Carbene Complexes; Ligand Tuning Facilitates Isolation of the First Structurally Characterised Copper(I)–NHC Containing a Copper(I)–Alkene Interaction

The preparation of a series of imidazolium salts bearing N‐allyl substituents, and a range of substituents on the second nitrogen atom that have varying electronic and steric properties, is reported. The ligands have been coordinated to a copper(I) centre and the resulting copper(I)–NHC (NHC=N‐heterocyclic carbene) complexes have been thoroughly examined, both in solution and in the solid‐state. The solid‐state structures are highly diverse and exhibit a range of unusual geometries and cuprophilic interactions. The first structurally characterised copper(I)–NHC complex containing a copper(I)–alkene interaction is reported. An N‐pyridyl substituent, which forms a dative bond with the copper(I) centre, stabilises an interaction between the metal centre and the allyl substituent of a neighbouring ligand, to form a 1D coordination polymer. The stabilisation is attributed to the pyridyl substituent increasing the electron density at the copper(I) centre, and thus enhancing the metal(d)‐to‐alkene(π*) back‐bonding. In addition, components other than charge transfer appear to have a role in copper(I)–alkene stabilisation because further increases in the Lewis basicity of the ligand disfavours copper(I)–alkene binding.     

C—H···X (X = N,O, S) intramolecular interaction in 1‐vinyl‐2‐(2′‐heteroaryl)pyrroles as monitored by 1H and 13C NMR spectroscopy

¹H and ¹³C NMR spectroscopy of a series of 1‐vinyl‐2‐(2′‐heteroaryl)‐pyrroles were employed for the analysis of their electronic and spatial structure. The C—H···N intramolecular interaction between the α‐hydrogen of the vinyl group and the pyridine nitrogen, a kind of hydrogen bonding, was detected in 1‐vinyl‐2‐(2′‐pyridyl)pyrrole, which disappeared in its iodide methyl derivative. It was shown that this interaction is stronger than the C—H···O and C—H···S interactions in 1‐vinyl‐2‐(2′‐furyl)‐ and ‐2‐(2′‐thienyl)‐pyrroles. Copyright © 2001 John Wiley & Sons, Ltd.     

Poly(ionic liquid)s based on imidazolium hydrogen carbonate monomer units as recyclable polymer‐supported N‐heterocyclic carbenes: Use in organocatalysis

Synthesis of novel poly(ionic liquid)s, namely, poly(1‐vinyl‐3‐alkylimidazolium hydrogen carbonate)s, denoted as poly([NHC(H)][HCO₃])s or PVRImHCO₃, where R is an alkyl group (R = ethyl, butyl, phenylethyl, dodecyl), is described. Two distinct synthetic routes were explored. The first method is based on the free‐radical polymerization (FRP) of 1‐vinyl‐3‐alkylimidazolium monomers featuring a hydrogen carbonate counter anion (HCO₃^?), denoted as VRImHCO₃. The latter monomers were readily synthesized by alkylation of 1‐vinylimidazole (VIm), followed by direct anion exchange of 1‐vinyl‐3‐alkylimidazolium bromide monomers (VRImBr), using potassium hydrogen carbonate (KHCO₃) in methanol at room temperature. Alternatively, the same anion exchange method could be applied onto FRP‐derived poly(1‐vinyl‐3‐alkylimidazolium bromide) precursors (PVRImBr). All PVRImHCO₃ salts proved air stable and could be manipulated without any particular precautions. They could serve as polymer‐supported precatalysts to generate polymer‐supported N‐heterocyclic carbenes, referred to as poly(NHC)s, formally by a loss of “H₂CO₃” (H₂O +CO₂) in solution. This was demonstrated through selected organocatalyzed reactions of molecular chemistry, known as being efficiently mediated by molecular NHC catalysts, including benzoin condensation, transesterification and cyanosilylation of aldehyde. Of particular interest, recycling of the polymer‐supported precatalysts was possible by re‐carboxylation of in situ generated poly(NHC)s. Organocatalyzed reactions could be performed with excellent yields, even after five catalytic cycles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4530–4540     

1,3‐Dipolar Cycloaddition of 4‐Chlorobenzonitrile Oxide with Some Dipolarophiles: Theoretical Analysis of Regioselectivity

Reaction of 4‐chlorobenzonitrile oxide ( 2 ) which was generated in situ with acrylo nitrile ( 3 ), vinyl acetate ( 4 ) and allyl bromide ( 5 ) as dipolarphile afforded the new cycloadducts 6a , 7a , and 8a compounds, respectively. Reactivity and regiochemistry of these reactions were investigated using activation energy calculations and density functional theory‐based reactivity indexes. The theoretical ¹³C NMR chemical shifts of the cycloadducts which were obtained by gauge‐invariant atomic orbital method were comparable with the observed values.     

A Persistent 1,2‐Dihydrophosphasilene Adduct

The reaction of the arylchlorosilylene–NHC adduct ArSi(NHC)Cl [Ar=2,6‐Trip₂‐C₆H₃; NHC=(MeC)₂(NMe)₂C] 1 with one molar equiv of LiPH₂^.dme (dme=1,2‐dimethoxyethane) affords the first 1,2‐dihydrophosphasilene adduct 2 (ArSi(NHC)(H)?PH). The latter is labile in solution and can undergo head‐to‐tail dimerization to give [ArSi(H)PH]₂ 3 and “free” NHC. Further stabilization of 2 by complexation with {W(CO)₅} affords the isolable 1,2‐dihydrophosphasilene–tungsten complex 4 [ArSi(NHC)(H)?P(H)W(CO)₅]. Additionally, the new 1‐silyl‐2‐hydrophosphasilene ArSi(NHC)(H)?PSiMe₃ 5 could be synthesized and structurally characterized. DFT studies confirmed that the Si?P bond in 2 and 4 is mostly zwitterionic with drastically decreased double‐bond character.     

A macromonomer approach to the synthesis of poly(1,1‐bis(ethoxycarbonyl)‐2‐vinyl cyclopropane‐graft‐dimethyl siloxane)

Poly(1,1‐bis(ethoxycarbonyl)‐2‐vinyl cyclopropane (ECVP)‐graft‐dimethyl siloxane) copolymers were prepared using a macromonomer approach. Poly(dimethyl siloxane) (PDMS) macromonomers were prepared by living anionic polymerization of cyclosiloxanes followed by sequential chain‐end capping with allyl chloroformate. These macromonomers were then copolymerized with ECVP. MALDI‐ToF mass spectrometry and ¹H NMR spectroscopy were used to show that the macromonomers had approximately 80% of the end groups functionalized with allyl carbonate groups. Gradient polymer elution chromatography showed that high yields of the graft copolymers were obtained, along with only small fractions of the PECVP and PDMS homopolymers. Differential scanning calorimetry showed that the low glass transition temperature (T_g) of the PDMS component could be maintained in the graft copolymers. However, the T_g was a function of polymer composition and the polymers produced had T_gs that ranged from ?50 to ?120 °C. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Racemic Vinylallenes in Catalytic Enantioselective Multicomponent Processes: Rapid Generation of Complexity through 1,6‐Conjugate Additions

Racemic vinylallenes are shown to be effective substrates for catalytic multicomponent diastereo‐ and enantioselective 1,6‐conjugate addition of multifunctional allyl moieties to easily accessible α,β,γ,δ‐unsaturated diesters. Reactions may be catalyzed by 5.0 mol % of a readily accessible NHC‐Cu complex at ambient temperature, and other than a vinylallene, involve B₂(pin)₂ and an α,β,γ,δ‐unsaturated diester. A variety of vinylallenes were converted to products bearing a Z‐trisubstituted alkenyl‐B(pin) moiety, a vinyl group, a β,γ‐unsaturated diester unit, and vicinal stereogenic centers in up to 67 % yield, 87:13 Z/E ratio, >98:2 d.r., and 98:2 e.r. Chemoselective modifications involving the alkenyl‐B(pin), the vinyl, or the 1,2‐disubstituted olefin moieties were carried out to demonstrate versatility and utility. Stereochemical models, based on mechanistic and DFT studies, demonstrate the dynamic behavior of intermediated Cu‐allyl species and account for various selectivity profiles.     

Iridium‐Catalyzed Intermolecular Asymmetric Dearomatization of β‐Naphthols with Allyl Alcohols or Allyl Ethers

An Ir‐catalyzed intermolecular asymmetric dearomatization reaction of β‐naphthols with allyl alcohols or allyl ethers was developed. When an iridium catalyst generated from [Ir(COD)Cl]₂ (COD=cyclooctadiene) and a chiral P/olefin ligand is employed, highly functionalized β‐naphthalenone compounds bearing an all‐carbon‐substituted quaternary chiral center were obtained in up to 92 % yield and 98 % ee . The direct utilization of allyl alcohols as electrophiles represents an improvement from the viewpoint of atom economy. Allyl ethers were found to undergo asymmetric allylic substitution reaction under Ir catalysis for the first time. The diverse transformations of the dearomatized product to various motifs render this method attractive.     

1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile and Vinyl Ethers: Cyclic Ketene Imines on the Pathway to 1 : 2 Cycloadducts

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile (BTE; (=E)‐ and (Z)‐1,2‐bis(trifluoromethyl)but‐2‐enedinitrile) were reacted with an excess of methyl vinyl ether, used as solvent, and furnished 1 : 2 adducts 6 (54%) and cyclobutanes 3 as 1 : 1 adducts (41%). The four diastereoisomeric bis‐adducts 6 (different ratios from (E)‐ and (Z)‐BTE) are derivatives of 1‐azabicyclo[4.2.0]oct‐5‐ene; X‐ray analyses and ¹⁹F‐NMR spectra revealed their structures. Since the cyclobutanes 3 are resistant to vinyl ether, the pathways leading to mono‐ and bis‐adducts must compete on the level of the intermediate l,4‐zwitterions 1 and 2 . The latter either cyclize to the cyclobutanes 3 or to six‐membered cyclic ketene imines 8 which accept a second molecule of vinyl ether to yield the bis‐adducts 6 . The occurrence of the highly strained ketene imines 8 gains credibility by comparison to stable seven‐membered cyclic ketene imines recently reported.     

Synthesis of 1,3‐bis(2‐trimethylsilyloxyhexafluoro‐2‐propyl)‐5‐allylbenzene and its introduction into polysiloxane chains

The synthesis of 1,3‐bis(2‐trimethylsilyloxyhexafluoro‐2‐propyl)‐5‐allylbenzene ( IV ) is described, starting from commercially available 1,3‐bis(2‐hydroxyhexafluoro‐2‐propyl)benzene. After the first step of iodination was optimized, a series of metallating agents were tested, before allylation, so that the best reagent could be selected. The allyl compound IV was then added to two different copoly(dimethyl‐methylhydro)siloxanes, PS 122.5 and PS 123 from Gelest/ABCR, via platinum‐catalyzed hydrosilylation, for the preparation of new polysiloxanes bearing specifically designed pendant aryl moieties. The different synthesized products were characterized by spectroscopic methods (IR and ¹H, ¹³C, ¹⁹F, and ²⁹Si NMR), and the glass‐transition temperatures of copolymers VI‐2 , VI‐3 , and VI‐4 were measured. It was shown that the higher the amount was of grafted fluoroaryl groups, the higher the glass‐transition temperature was. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1400–1410, 2003