An ion-imprinted polymer supported by attapulgite with a chitosan incorporated sol-gel process for selective separation of Ce(Ⅲ)

The surface ion-imprinting concept and chitosan incorporated sol-gel process were applied to the synthesis of a new attapulgitesupported polymer for selective separation of Ce(Ⅲ) from aqueous solution.The imprinting mechanism of prepared ion-imprinted polymer were discussed with the Characteristics of FT-IR and SEM.Results from the experiments of adsorption capacity and selectivity suggested that ion-imprinted polymer offered a fast kinetics for the adsorption of Ce(Ⅲ) under the optimum conditions. Its m...     

PREPARATION OF SURFACE ION-IMPRINTED ATTAPULGITE-SUPPORTED POLYMER AND ITS ADSORPTION BEHAVIORS OF Sr（II）

The surface ion-imprinting concept and chitosan incorporated sol-gel process were applied to the preparation of a new attapulgite-supported organic-inorganic hybrid polymer for selective separation of Sr（II） from aqueous solution. The prepared polymer was characterized with SEM, IR and XRD. The results showed that as a sorbent, it had good configuration and binding sites. Its adsorption behaviors for Sr（II） was investigated by FAAS and ICP-AES. The effects on adsorption capacities, including pH, quiescent time, and adsorbent amount were discussed, and the adsorption isothermal curve was obtained. Then the Kd a parameter estimating relative adsorbability, was conducted to study the selectivity towards Sr（II） of the prepared polymer. Under the optimum conditions, the ion-imprinted polymer offered a fast kinetics for the adsorption of Sr（II） and the maximum capacity was 12.9mg/g. The Kd and K parameters estimating relative adsorbability towards target ion, suggested that selective recognition of the ion-imprinted polymer towards Sr（II） was much higher than that of the non-imprinted polymer and attapulgite. Furthermore, the ion-imprinted polymer is of great regeneration capacity. The prepared functional polymer was shown to be promising for selective preseparation and enrichment of trace Sr（II） in environmental samples.     

Preparation of a novel chelating resin for the removal of Ni2+ from water

A new chelating resin DVB-MA-HDA modified with hydroxamic acid groups was prepared for the fast removal of Ni2＋ from water. SEM, BET, elemental analysis, FT-IR spectroscopy and XPS were used to characterize this new adsorbent. Batch adsorption experiment indicated that the equilibrium adsorption capacity of DVB-MA-HD for Ni2＋ was more than 130mg/g, and the adsorption isotherm can be well fitted by the Langmuir model. The adsorption kinetic curve indicates that more than 60% of the adsorption amount of Ni2＋ at equilibrium occurred within the initial 20 rain. 0.1 mol/L EDTA solution could desorb Ni2＋ from DVB-MA-HDA effectively.     

PREPARATION AND CHARACTERIZATION OF NOVEL CHITOSAN DERIVATIVES: ADSORPTION EQUILIBRIUM OF IRON(Ⅲ) ION

The adsorption of Fe(Ⅲ)ions from aqueous solution by chitosan alpha-ketoglutaric acid(KCTS)and hydroxamated chitosan alpha-ketoglutaric acid(HKCTS)was studied in a batch adsorption system.Experiments were carried out as function of pH,temperature,agitation rate and concentration of Fe(Ⅲ)ions.The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and isotherm constants were determined.The Langmuir model agrees very well with experimental data.The pseudo-first-order and second-order kinetic models were used to describe the kinetic data and the rate constants were evaluated.The dynamical data fit well with the second-order kinetic model.The pseudo second-order kinetic model was indicated with the activation energy of 19.61 and 7.98 kJ/mol for KCTS and HKCTS,respectively.It is suggested that the overall rate of Fe(Ⅲ)adsorption is likely to be controlled by the chemical process.Results also showed that novel chitosan derivatives(KCTS and HKCTS)were favorable adsorbents.     

Preparation of quercetin imprinted core-shell organosilicate microspheres using surface imprinting technique

In this work,the quercetin imprinted core-shell microspheres were prepared using silica surface imprinting technique.A simple sol-gel procedure was used for the synthesis of the imprinted materials with 3-aminopropyltriethoxysilane as functional monomer and tetraethyl orthosilicate as crosslinker.The SEM images indicated that the MIPs shell was successfully grafted onto the silica surface.The characteristics of the molecularly imprinted polymers such as capacity,selectivity and absorption dynamic were investigated by rebinding experiments.The results showed that the prepared MIPs had good imprinting effect and adsorption amount of quercetin.     

Adsorption of As(III) from aqueous solution based on porous magnetic/chitosan/ferric hydroxide microspheres prepared via electrospraying

Porous chitosan(CS)/magnetic(Fe3O4 )/ferric hydroxide(Fe(OH)3 ) microsphere as novel and low-cost adsorbents for the removal of As(Ⅲ) have been synthesized via the electrospraying technology by a simple process of two steps. Characterization of the obtained adsorbents was studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The adsorption kinetics and equilibrium isotherms were investigated in batch experiments. The Langmuir, Freundlich isotherm and pseudo-second order kinetic models agree well with the experimental data. The adsorption of As(Ⅲ) onto CS/Fe3O4 /Fe(OH)3 microspheres occurred rapidly and reached adsorption equilibrium after about 45 min. The maximum adsorption capacity of CS/Fe3O4 /Fe(OH)3 microspheres, calculated by the Langmuir isotherm model, was 8.47 mg g-1 , which is higher than that of CS/Fe3O4 /Fe(OH) 3 prepared by the conventional method (4.72 mg g-1 ). The results showed that the microspheres had a high adsorption capacity for As(Ⅲ) and a high separation efficiency due to their microporous structure and superparamagnetic characteristics. Present research may eventually lead to a simple and low cost method for fabricating microporous materials and application for removal of arsenic from aqueous solution.     

Effect of Temperature-responsive Solution Behavior of PNIPAM-bPPEOMA-b-PNIPAM on Its Inclusion Complexation with α-Cyclodextrin

The effect of temperature-responsive solution behavior of PNIPAM-b-PPEOMA-b-PNIPAM on its inclusion complexation with α-cyclodextrin was studied. The triblock polymer was prepared by reversible addition-fragmentation chain transfer(RAFT) polymerization and formed inclusion complexes(ICs) after selective threading of the PEO segment of the triblock polymer through the cavities of α-CD units. For comparison, PPEOMA homopolymer was prepared and the inclusion complexation with α-CD was also studied. The ICs were prepared with α-CD when the polymer was in different conformations by changing the temperature, and the formed ICs were characterized by XRD, 1H-NMR, TGA and DSC. The solutions of the ICs show temperature-responsive clear/turbid transition or fluidic emulsion/gel transition depending on the concentration of the α-CD added, and the stoichiometry determined by 1H-NMR and TGA indicates that the stoichiometry of EO to α-CD of the resulted ICs increases with increasing of temperature.     

Selective transport of Ag(Ⅰ) ion across a bulk liquid and polymer membranes incorporated with di-N-benzylated O_3N_2 donor macrocycles

<正>The selective bulk liquid membrane and polymer membrane transports of Ag(Ⅰ) from an aqueous solution containing seven metal cations,Co(Ⅱ),Ni(Ⅱ),Cu(Ⅱ),Zn(Ⅱ),Ag(Ⅰ),Cd(Ⅱ) and Pb(Ⅱ),was studied.The source phases contained equimolar concentrations of the above-mentioned cations,with the source and receiving phases being buffered at pH 5.0 and 3.0,respectively. Ag(Ⅰ) ion transport occurred with a good efficiency from the aqueous source phases across the bulk liquid membrane and polymer membrane(derived from cellulose triacetate) containing ligand 1 as the ionophores,into the aqueous receiving phases.Clear transport selectivity for Ag(Ⅰ) was observed using ligand 1.There was no selectivity for the cations using ligand 2 in the both bulk liquid membrane and polymer membrane transports.     

Preparation and application of a novel orotic acid chelating resin for removal of Cu(Ⅱ) in aqueous solutions

A novel chelating resin OABA,capable of removing Cu(Ⅱ) from aqueous solution,was synthesized via the reaction of macroporous chloromethylated PS-DVB copolymer beads with orotic acid.The elemental analysis(EA),Fourier transform infrared spectroscopy(FT-IR),and scanning electron microscopy microscope-energy dispersive X-ray spectroscopy(SEM-EDS) were used in the characterization of the synthesized chelating resin.Multiple,static batch adsorption experiments were conducted at different initial concentrations and temperatures.OABA showed good adsorption capacity for Cu(Ⅱ) and the equilibrium data could be well matched with the Freundlich isotherm model.Coexisting sodium chloride and calcium chloride in solutions favored the Cu(Ⅱ) adsorption.Moreover,the desorption process of Cu(Ⅱ) was tested and over 90%regeneration efficiency for the spent OABA was achieved at ammonia concentrations ranging from 1.0%to 2.0%.The results suggested that OABA would be a potential alternative adsorbent for Cu(Ⅱ),even with other heavy metal ion treatments of wastewater.     

Sol–gel derived ion-imprinted silica-supported organic–inorganic hybrid sorbent for selective removal of lead(II) from aqueous solution

The current paper presents a novel Pb(II) ion-imprinted silica-supported organic–inorganic hybrid sorbent functionalized with Schiff base by coupling a surface imprinting technique with a sol–gel process for the selective removal of Pb(II) ions from aqueous solution. Fourier transmission infrared spectroscopy, scanning electron microscopy, N₂ adsorption–desorption isotherms and thermogravimetric analysis were used to characterize the Pb(II)-imprinted hybrid sorbent. The adsorption equilibrium was finished with 30 min. The experiment value of maximum adsorption capacity was found to be 54.9 mg g^?1. There were not significantly influence on the adsorption capacity of Pb(II) in the range of pH 3.5–6.5. The equilibrium data were fitted very well to the Langmuir isotherm model and pseudo-first-order kinetics model. Under competitive adsorption conditions, the Pb(II)-imprinted hybrid sorbent was 3.09, 4.73, 3.34 and 4.96 times more selective than the corresponding non-imprinted sorbent for the systems of Pb(II)/Cu(II), Pb(II)/Cd(II), Pb(II)/Ni(II) and Pb(II)/Zn(II), respectively. The thermodynamic results demonstrated that the adsorption of Pb(II) onto the Pb(II)-imprinted hybrid sorbent took place by a spontaneous and endothermic process with further increase in the degree of freedom at the solid–solution interface.     

Ni(II) ion-imprinted solid-phase extraction and preconcentration in aqueous solutions by packed-bed columns

Solid-phase extraction (SPE) columns packed with materials based on molecularly imprinted polymers (MIPs) were used to develop selective separation and preconcentration for Ni(II) ion from aqueous solutions. SPE is more rapid, simple and economical method than the traditional liquid-liquid extraction. MIPs were used as column sorbent to increase the grade of selectivity in SPE columns. In this study, we have developed a polymer obtained by imprinting with Ni(II) ion as a ion-imprinted SPE sorbent. For this purpose, NI(II)-methacryloylhistidinedihydrate (MAH/Ni(II)) complex monomer was synthesized and polymerized with cross-linking ethyleneglycoldimethacrylate to obtain [poly(EGDMA-MAH/Ni(II))]. Then, Ni(II) ions were removed from the polymer getting Ni(II) ion-imprinted sorbent. The MIP-SPE preconcentration procedure showed a linear calibration curve within concentration range from 0.3 to 25 ng/ml and the detection limit was 0.3 ng/ml (3 s) for flame atomic absorption spectrometry (FAAS). Ni(II) ion-imprinted microbeads can be used several times without considerable loss of adsorption capacity. When the adsorption capacity of nickel imprinted microbeads were compared with non-imprinted microbeads, nickel imprinted microbeads have higher adsorption capacity. The K_d (distribution coefficient) values for the Ni(II)-imprinted microbeads show increase in K_d for Ni(II) with respect to both K_d values of Zn(II), Cu(II) and Co(II) ions and non-imprinted polymer. During that time K_d decreases for Zn(II), Cu(II) and Co(II) ions and the k′ (relative selectivity coefficient) values which are greater than 1 for imprinted microbeads of Ni(II)/Cu(II), Ni(II)/Zn(II) and Ni(II)/Co(II) are 57.3, 53.9, and 17.3, respectively. Determination of Ni(II) ion in sea water showed that the interfering matrix had been almost removed during preconcentration. The column was good enough for Ni determination in matrixes containing similar ionic radii ions such as Cu(II), Zn(II) and Co(II).     

磁性Fe3O4@SiO2@CS镉离子印迹聚合物的制备及吸附性能

以SiO2包覆的纳米Fe3O4为载体, 壳聚糖(Chitosan, CS)为功能配体, γ-缩水甘油醚氧丙基三甲氧基硅烷为交联剂, 制备了磁性Fe3O4@SiO2@CS镉离子印迹聚合物(Magnetic ion-imprinted polymer, M-IIP). 采用扫描电镜和红外光谱对该磁性印迹聚合物进行了表征. 结果表明, 壳聚糖在环氧基硅烷交联作用下, 实现了印迹壳层在磁性Fe3O4表面的接枝, 该印迹材料是边长为60~120 nm的立方体. 吸附性能实验表明, M-IIP对Cd(Ⅱ)的吸附符合一级动力学吸附模型; M-IIP对Cd(Ⅱ)/Cu(Ⅱ), Cd(Ⅱ)/Zn(Ⅱ), Cd(Ⅱ)/Pb(Ⅱ)和Cd(Ⅱ)/Hg(Ⅱ)的相对选择系数分别为2.92, 3.43, 8.97和9.20. 原子吸收光谱检测结果表明, 该磁性Fe3O4@SiO2@CS离子印迹聚合物可用于水溶液中Cd(Ⅱ)的分离, Cd(Ⅱ)回收率在98%以上.     

Selective solid-phase extraction of nickel(II) using a surface-imprinted silica gel sorbent

A new Ni(II)-imprinted amino-functionalized silica gel sorbent with excellent selectivity for nickel(II) was prepared by an easy one-step reaction by combining a surface imprinting technique for selective solid-phase extraction (SPE) of trace Ni(II) in water samples prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Compared with non-imprinted polymer particles, the ion-imprinted polymers (IIPs) had higher selectivity and adsorption capacity for Ni(II). The maximum static adsorption capacity of the ion-imprinted and non-imprinted sorbent for Ni(II) was 12.61 and 4.25 mg g⁻¹, respectively. The relatively selective factor (α_r) values of Ni(II)/Cu(II), Ni(II)/Co(II), Ni(II)/Zn(II) and Ni(II)/Pd(II) were 45.99, 32.83, 43.79 and 28.36, which were greater than 1. The distribution ratio (D) values of Ni(II)-imprinted polymers for Ni(II) were greatly larger than that for Cu(II), Co(II), Zn(II) and Pd(II). The detection limit (3σ) was 0.16 ng mL⁻¹. The relative standard deviation of the method was 1.48% for eight replicate determinations. The method was validated by analyzing two certified reference materials (GBW 08618 and GBW 08402), the results obtained is in good agreement with standard values. The developed method was also successfully applied to the determination of trace nickel in plants and water samples with satisfactory results.     

Selective adsorption and separation of Cs(I) from salt lake brine by a novel surface magnetic ion-imprinted polymer

A new Cs(I) magnetic ion-imprinted polymer (Cs(I)-MIIP) aimed at the selective adsorption and separation of Cs(I) from salt lake brine was prepared. The Fe₃O₄@SiO₂ was used as supporter, Cs(I) as template ion, and carboxymethyl chitosan as functional monomer. The product was characterized by Fourier transform infrared spectra, XRD, energy-dispersive spectrometry, scanning electron microcopy, thermogravimetric analysis, and vibrating sample magnetometer. The adsorption of the Cs(I)-MIIP in solution was investigated, which indicated the maximum adsorption capacity was 36.15?mg·g^?1 under the optimum conditions. The pseudo-first-order kinetic model and the Freundlich isotherm model were applied to predict the adsorption process of Cs(I) onto Cs(I)-MIIP. Selectivity experiments showed that the relative selectivity coefficient (k′) were 24.995, 1.73, 1.43, 4.83, and 1.63 to Cs(I)/Li(I), Cs(I)/Na(I), Cs(I)/K(I), Cs(I)/Rb(I), and Cs(I)/Sr(II) binary solutions, higher than those of NIP, respectively. Furthermore, the Cs(I)-MIIP was successfully applied to the enrichment and separation of Cs(I) from the salt lake brine of Qinghai, with satisfactory Cs(I) recovery rates.     

Selective enrichment of trace copper(II) from biological and natural water samples by SPE using ion-imprinted polymer

A novel Cu(II)-imprinted polymer sorbent was prepared by an ion-imprinted polymer (IIP) technique using (2Z)-N,N'-bis(2-aminoethylic)but-2-enediamide as the functional monomer and pentaerythritol triacylate as a crosslinker. IR, XPS, and elemental analysis techniques were used to confirm the obtained product. Subsequently, when this polymer was used as sorbent in SPE, it exhibited excellent selectivity for template ion from an aqueous solution. Quantitative extraction of Cu(II) was achieved in the pH range of 4-7. The time needed to extract each sample was less than 30 min by the batch method. The distribution ratio (D) values of IIP for Cu(II) were greatly larger than that for other ions. At optimal pH value, the maximum extraction capacity of IIP and nonimprinted polymer (NIP) was found to be 29.8 and 7.0 mg/g, respectively. The adsorption behavior of Cu(II) on the sorbents could be described by Langmuir adsorption isotherm equation. The feasible flow rate of Cu(II)-containing solution for quantitative extraction onto the column packed with IIP was 1-4 mL/min, whereas for elution it was less than 1 mL/min. The developed method was successfully applied to the separation and enrichment of trace Cu(II) in biological and natural water samples with satisfactory results.     

Synthesis of ion-imprinted mesoporous silica gel sorbent for selective adsorption of copper ions in aqueous media

A new Cu(II) ion-imprinted sorbent was synthesized by a surface imprinting technique and characterized by FT-IR and SEM. Compared to the non-imprinted sorbent, the Cu(II) ion-imprinted sorbent had a higher adsorption capacity and selectivity for Cu(II). The static adsorption capacity of the Cu(II) ion-imprinted sorbent and non-imprinted sorbent for Cu(II) were 84.5 and 46.5 μmol?g^?1, respectively. The best selectivity coefficient over Zn(II) or Cd(II) ion was over 12. The relative selectivity coefficients of the sorbent for Cu(II) in the presence of Zn(II) and Cd(II) were 13 and 35, respectively. Furthermore, the new sorbent possessed a fast kinetics for Cu(II) sorption from aqueous solution with saturation time of <30 min, and could be used repeatedly. The standard deviation for 11 replicate determinations of 0.5 mg?L^?1 Cu(II) was 0.8%. This new Cu(II) ion-imprinted sorbent can be used as an effective solid-phase extraction material for the selective preconcentration and separation of Cu(II).     

Synthesis and Adsorption Performance of Surface‐Grafted Co(II)‐Imprinted Polymer for Selective Removal of Cobalt

The surface‐grafting ion‐imprinting technology was applied to synthesis of a new Co(II)‐imprinted polymer [Co(II)‐IP], which could be used for selective removal of Co(II) from aqueous solutions. The prepared polymer was characterized by using the infrared spectra (IR), X‐ray diffractometer (XRD), X‐ray energy dispersion spectroscopy (EDS) and scanning electron microscopy (SEM). The maximum adsorption capacity values for the Co(II)‐imprinted polymer and non‐imprinted polymer (NIP) were 22 and 8 mg/g, respectively. The Freundlich equation fitted the adsorption isotherm data well. The applicability of two kinetic models including pseudo‐first‐order and pseudo‐second‐order models was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity, and correlation coefficients. Results suggested that chemical process could be the rate‐limiting step in the adsorption process. And the adsorption of Co(II) on the Co(II)‐imprinted polymer was endothermic. The relative selectivity coefficients of the Co(II)‐imprinted polymer for Co(II)/Pb(II), Co(II)/Cu(II), Co(II)/Ni(II), Co(II)/Sr(II) and Co(II)/Cs(I) were respectively 11.5, 6.1, 13.8, 9.4, and 8.1 times greater than that of the non‐imprinted polymer. Eventually, the desorption conditions of the adsorbed Co(II) from the Co(II)‐imprinted polymer were also studied in batch experiments.