用核磁共振技术研究[C4mim][BF4]在重水和氘代氯仿中的聚集行为

运用核磁共振技术, 研究了室温离子液体1-丁基-3-甲基咪唑四氟硼酸盐([C4mim][BF4])在重水和氘代氯仿中的聚集行为. 实验结果表明, 随着混合体系中离子液体摩尔分数的增加, 在重水中, 离子液体阳离子上各氢原子的化学位移向低场移动, 且呈现了先急剧变化, 后趋于平缓的变化趋势; 在氘代氯仿中, 离子液体阳离子上H2的化学位移向高场移动, H4和H5以及与氮原子直接相连的甲基和亚甲基上的氢原子的化学位移都向低场移动, 且各氢原子的核磁共振信号发生了变化. 根据质量作用定律及1H NMR化学位移随浓度的变化关系计算了[C4mim][BF4]在重水中的临界聚集浓度和聚集数, 并在离子液体阴、阳离子缔合以及离子液体与溶剂相互作用的基础上对实验结果进行了讨论.     

用核磁共振技术研究[C4mim][BF4]在重水和氘代氯仿中的聚集行为

运用核磁共振技术,研究了室温离子液体1-丁基-3-甲基咪唑四氟硼酸盐([C4mim[BF4])在重水和氘代氯仿中的聚集行为.实验结果表明,随着混合体系中离子液体摩尔分数的增加,在重水中,离子液体阳离子上各氢原子的化学位移向低场移动,且呈现了先急剧变化,后趋于平缓的变化趋势;在氘代氯仿中,离子液体阳离子上H2的化学位移向高场移动,H4和H5以及与氮原子直接相连的甲基和亚甲基上的氢原子的化学位移都向低场移动,且各氢原子的核磁共振信号发生了变化.根据质量作用定律及1H NMR化学位移随浓度的变化关系计算了[C4mim][BF4]在重水中的临界聚集浓度和聚集数,并在离子液体阴、阳离子缔合以及离子液体与溶剂相互作用的基础上对实验结果进行了讨论.     

离子液体四氟硼酸-1-戊基-3-甲基咪唑的物理化学性质的估算

根据标准加入法原理配制一系列含有已知微量水的离子液体四氟硼酸-1-戊基-3-甲基咪唑([C5mim][BF4])样品,在278.15～338.15 K温度范围内,样品的密度与其含水量呈很好线性关系. 利用外推方法确定了含水量为零时[C5mim][BF4]的密度ρ,得到了密度随温度变化的经验方程:ln ρ=0.120 11-5.79×10-4(T-298.15)和离子液体的热膨胀系数α=5.79×10-4K-1. 根据Glasser理论估算了[C5mim][BF4]的标准熵、表面能和晶格能,晶格能较小使离子液体在室温下能以液态形式存在. 利用空隙模型计算得到了[C5mim][BF4] 热膨胀系数α(计算),与实验测定值在数量级上一致,说明空隙模型有一定的合理性.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

疏水性离子液体萃取光甘草定

选择了疏水性的离子液体1-丁基-3-甲基咪唑六氟磷酸盐([C4mim][PF6])和亲水性的离子液体1-丁基-3-甲基咪唑四氟硼酸盐([C4mim][BF4])作萃取剂,对光甘草定提取液进行了萃取,并对离子液体的再生进行了研究。结果表明,亲水性的离子液体和光甘草定提取液无法分层,而疏水性的离子液体分层清晰,并得疏水性离子液体[C4mim][PF6]萃取光甘草定最佳萃取工艺条件为:相体积比为1∶2.5(V/V),pH值为7,萃取温度为45℃,萃取时间为30 min,此时光甘草定的萃取率达85.49%。离子液体再生选用2 mol.L-1氢氧化钠和无水乙醇混合液做反萃剂,可得光甘草定的回收率大于90%,离子液体循环使用5次,萃取率未见明显下降。     

辣根过氧化物酶在亲水性离子液体中的活性与稳定性研究

基于辣根过氧化物酶对过氧化氢氧化愈创木酚这个显色反应的催化作用,研究了辣根过氧化物酶在七种亲水性离子液体[C2mim][BF4]、[C4mim][BF4]、[C6mim][BF4]、[C4mim]HSO4、[C4mim]Cl、[C4mim]NO3、[C4mim][CF3CO2]中的活性与稳定性变化.结果表明辣根过氧化物酶在不同离子液体中均有不同程度的失活,辣根过氧化物酶活性随离子液体极性增强而降低.辣根过氧化物酶在含[C4mim]Cl离子液体的介质中,随着温度升高,[C4mim]Cl对辣根过氧化物酶的失活过程起加速作用,离子液体浓度越高,酶的热稳定性越差.紫外-可见光谱研究表明,在含[Cnmim][BF4]、[C4mim]HSO4、[C4mim]Cl、[C4mim]NO3的介质中,辣根过氧化物酶血红素中心最大吸收峰没有发生变化,但吸收值增强,证明离子液体使酶的血红素基团暴露于介质中而增强了吸收;而在含[C4mim][CF3CO2]的介质中,辣根过氧化物酶血红素基团最大吸收峰区发生蓝移,证明有部分血红素基团被离子液体破坏而脱落.     

[C4mim][PF6]和[C4mim][NTf2]离子液体辐射诱导的相行为及荧光行为变化

离子液体因其低挥发性, 高热稳定性及优良的萃取性能被认为是萃取分离放射性核素的新一代绿色溶剂, 而研究离子液体本身的辐射效应是其实际应用的重要前提. 本文以60Co为辐射源, 系统研究了γ辐照对两种常见的憎水性咪唑离子液体1-丁基-3-甲基咪唑六氟磷酸盐([C4mim][PF6])和1-丁基-3-甲基咪唑三氟甲基磺酰胺酸盐([C4mim][NTf2])的相行为及荧光行为的影响. 在相行为方面, γ辐照使离子液体的结晶驰豫时间增加, 导致其低温结晶延迟. 在荧光行为方面, γ辐照后离子液体的荧光光谱保持原有的“红边效应(red edge effect)”, 但随吸收剂量增加, 光谱整体发生红移(最大移动幅度达150 nm). 并且这种“红边效应”在辐照后离子液体的乙腈稀释剂中仍然存在, 且随稀释倍数增加光谱整体发生蓝移. [C4mim][PF6]和[C4mim][NTf2]离子液体辐照后的这种相行为及荧光行为的变化可归因于辐照对其阴阳离子空间相关性(缔合行为)的影响.     

离子液体萃取阿魏酸和咖啡酸的性能研究

以1-甲基-3-丁基咪唑六氟磷酸盐([C4mim][PF6])和1-甲基-3-己基咪唑六氟磷酸盐([C6mim][PF6])离子液体为萃取剂,采用紫外分光光度法研究了溶液pH值、温度、相比率及盐的种类和浓度对其萃取阿魏酸和咖啡酸效率的影响,考察了被萃取物的回收及离子液体的循环使用,探讨了两种离子液体替代传统有机溶剂阿魏酸和咖啡酸的可能性。实验结果表明:萃取温度和无机盐的种类及浓度对FA和CA萃取效率的影响较小;水相pH值对萃取效率有较大的影响,萃取FA适宜pH应小于3.67,萃取CA适宜pH应小于3.71;被萃取物浓度增大,萃取效率降低,而相体积比增大其萃取效率升高;两种离子液体对FA和CA的萃取效率[C4mim][PF6]大于[C6mim][PF6],同种离子液体对FA的萃取效率大于CA;在萃取相中的FA和CA可定量回收,且被萃取物中离子液体的残留[C6mim][PF6]小于[C4mim][PF6],离子液体可循环使用。     

甘氨酸离子液体[C3mim][Gly]和[C4mim][Gly]水溶液的表面张力

本文用中和法合成了基于烷基咪唑的甘氨酸离子液体[C3mim][Gly]（1-丙基-3-甲基咪唑甘氨酸离子液体）和[c4miml[Gly]（1-丁基-3．甲基咪唑甘氨酸离子液体）,在298．15K下,0．0400-0．5000molkg^-1浓度范围内测定了不同浓度[C4mim][Oly]和[c3mim][Gly]离子液体水溶液的密度和表面张力,得到了溶液等张比容的实验值,提出了预测不同浓度溶液等张比容的经验方程,利用这个经验方程和李以圭等人提出的溶液表面张力模型,分别估算了这两种离子液体水溶液的表面张力,其估算值和实验值在误差范围内很好地吻合．     

毛细管电泳法表征离子液体与蛋白质的相互作用

基于毛细管区带电泳考察了不同离子液体的阳离子母核、烷基侧链碳原子数目和阴离子组成对牛血清白蛋白的影响,以及离子液体[C4mim]BF4与肌红蛋白、牛血清白蛋白、血红蛋白、牛凝血酶和转铁蛋白之间的相互作用。利用亲和毛细管电泳法比较了[C4mim]BF4与上述蛋白之间的相互作用,并计算得到结合常数Kb分别为1.24×107 L/mol,1.23×106 L/mol,5.75×104 L/mol和5.60×104 L/mol。结果表明,转铁蛋白、血红蛋白、肌红蛋白、牛血清白蛋白与离子液体的相互作用依次减弱,存在1～2个数量级的差异。结合毛细管区带电泳和亲和毛细管电泳模式可实现离子液体与多种蛋白质相互作用的定性与定量表征。     

溴代1-己基-3-甲基咪唑离子液体与丙酮的相互作用

1H and 13C NMR chemical shifts were determined to investigate the interactions of acetone with a room temperature ionic liquid 1-hexyl-3- methylimidazolium bromide C6mimBr at various mole fractions. Changes in chemical shifts of hydrogen nuclei and of carbon nuclei with the acetone concentration indicated the formation of hydrogen bond between anion of the ionic liquid and methyl protons of acetone. The NMR results were in good agreement with the ab initio computational results.     

Liquid structure of room-temperature ionic liquid, 1-Ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide

The liquid structure of 1-ethyl-3-methylimidazolium bis-(trifluoromethanesulfonyl) imide (EMI(+)TFSI(-)) has been studied by means of large-angle X-ray scattering (LAXS), (1)H, (13)C, and (19)F NMR, and molecular dynamics (MD) simulations. LAXS measurements show that the ionic liquid is highly structured with intermolecular interactions at around 6, 9, and 15 A. The intermolecular interactions at around 6, 9, and 15 A are ascribed, on the basis of the MD simulation, to the nearest neighbor EMI(+)...TFSI(-) interaction, the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions, and the second neighbor EMI+...TFSI(-) interaction, respectively. The ionic liquid involves two conformers, C(1) (cis) and C(2) (trans), for TFSI(-), and two conformers, planar cis and nonplanar staggered, for EMI(+), and thus the system involves four types of the EMI(+)...TFSI(-) interactions in the liquid state by taking into account the conformers. However, the EMI(+)...TFSI(-) interaction is not largely different for all combinations of the conformers. The same applies alsoto the EMI(+)...EMI(+) and TFSI(-)...TFSI(-) interactions. It is suggested from the 13C NMR that the imidazolium C(2) proton of EMI(+) strongly interacts with the O atom of the -SO(2)(CF(3)) group of TFSI(-). The interaction is not ascribed to hydrogen-bonding, according to the MD simulation. It is shown that the liquid structure is significantly different from the layered crystal structure that involves only the nonplanar staggered EMI(+) and C(1) TFSI(-) conformers.     

(13)C cell wall enrichment and ionic liquid NMR analysis: progress towards a high-throughput detailed chemical analysis of the whole plant cell wall

The ability to accurately and rapidly measure plant cell wall composition, relative monolignol content and lignin-hemicellulose inter-unit linkage distributions has become essential to efforts centered on reducing the recalcitrance of biomass by genetic engineering. Growing (13)C enriched transgenic plants is a viable route to achieve the high-throughput, detailed chemical analysis of whole plant cell wall before and after pretreatment and microbial or enzymatic utilization by (13)C nuclear magnetic resonance (NMR) in a perdeuterated ionic liquid solvent system not requiring component isolation. 1D (13)C whole cell wall ionic liquid NMR of natural abundant and (13)C enriched corn stover stem samples suggest that a high level of uniform labeling (>97%) can significantly reduce the total NMR experiment times up to ～220 times. Similarly, significant reduction in total NMR experiment time (～39 times) of the (13)C enriched corn stover stem samples for 2D (13)C-(1)H heteronuclear single quantum coherence NMR was found.     

A novel ionic liquid based on small size cation

An ionic liquid material containing small size cation was synthesized and its composition and structure was determined by FT-IR, 1H NMR, 13C NMR and element analysis. However, its physical properties such as melting point, viscosity, conductivity, etc. were measured and the results show that the novel ionic liquid is composed of small cation with highly symmetry and larger anion which is very rare among the reported ionic liquid family.     

Physicochemical properties of ether-functionalized ionic liquids [CnOC2mim][Gly] (n = 1–5)

Journal of Thermal Analysis and Calorimetry - A novel ionic liquid 1-ethoxyethyl-3-methylimidazolium glycine ([C2OC2mim][Gly]) was prepared and characterized by 1H NMR spectroscopy, 13C NMR...     

Nanoscale Pt(0) particles prepared in imidazolium room temperature ionic liquids: synthesis from an organometallic precursor,characterization, and catalytic properties in hydrogenation reactions

The reaction of Pt(2)(dba)(3) (dba = bis-dibenzylidene acetone) dispersed in room temperature 1-n-butyl-3-methylimidazolium (BMI) hexafluorophosphate ionic liquid with molecular hydrogen (4 atm) at 75 degrees C leads to stable and isolable nanometric Pt(0) particles. The X-ray diffraction analysis (XRD) of the material indicated that it is constituted of Pt(0). Transmission electron microscopy (TEM) analysis of the particles dispersed in the ionic liquid shows the formation of [Pt(0)](n) nanoparticles of 2.0-2.5 nm in diameter. A detailed examination of the nanoparticles imbibed in the ionic liquid and their environment shows an interaction of the BMI.PF(6) ionic liquid with the Pt(0) nanoparticles. The isolated [Pt(0)](n) nanoparticles can be redispersed in the ionic liquid or in acetone or used in solventless conditions for liquid-liquid biphasic, homogeneous, or heterogeneous hydrogenation of alkenes and arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered platinum nanoparticles can be reused as a solid or redispersed in the ionic liquid several times without any significant loss in catalytic activity.     

Mechanism of cellulose dissolution in the ionic liquid 1-n-butyl-3-methylimidazolium chloride: a 13C and 35/37Cl NMR relaxation study on model systems

13C and 35/37Cl NMR relaxation measurements on several model systems demonstrate that the solvation of cellulose by the ionic liquid (IL) 1-n-butyl-3-methylimidazolium chloride ([C4mim]Cl) involves hydrogen-bonding between the carbohydrate hydroxyl protons and the IL chloride ions in a 1 ratio 1 stoichiometry.     

Computational approach to nuclear magnetic resonance in 1-Alkyl-3-methylimidazolium ionic liquids

A quantum-chemical computational approach to accurately predict the nuclear magnetic resonance (NMR) properties of 1-alkyl-3-methylimidazolium ionic liquids has been performed by the gauge-including atomic orbitals method at the B3LYP/6-31++G** level using different simulated ionic liquid environments. The first molecular model chosen to describe the ionic liquid system includes the gas-phase optimized structures of ion pairs and separated ions of a series of imidazolium salts containing methyl, butyl, and octyl substituents and PF6-, BF4-, and Br- anions. In addition, a continuum polarizable model of solvation has been applied to predict the effects of the medium polarity on the molecular properties of 1,3-dimethylimidazolium hexafluorophosphate (MmimPF6). Furthermore, the specific acidic and basic solute-solvent interactions have been simulated by a discrete solvation model based on molecular clusters formed by MmimPF6 species and a discrete number of water molecules. The computational prediction of the NMR spectra allows a consistent interpretation of the dispersed experimental evidence in the literature. The following are main contributions of this work: (a) Theoretical results state the presence of a chemical equilibrium between ion-pair aggregates and solvent-separated counterions of 1-alkyl-3-methylimidazolium salts which is tuned by the solvent environment; thus, strong specific (acidic and basic) and nonspecific (polarity and polarizability) solvent interactions are predicted favoring the dissociated ionic species. (b) The calculated 1H and 13C NMR properties of these ionic liquids are revealed as highly dependent on the nature of solute-solvent interactions. Thus, the chemical shift of the hydrogen atom in position two of the imidazolium ring is deviated to high values by the specific interactions with water molecules, whereas nonspecific interaction with water (as a solvent) affects, in the opposite direction, this 1H NMR parameter. (c) Last, current calculations support the presence of hydrogen bonding between counterions, suggesting the importance of this interaction in the properties of the solvent in the 1-alkyl-3-methylimidazolium ionic liquids.     

Introduction of a novel dicationic Brönsted acidic ionic liquid based on pyrazine and its application in the synthesis of xanthenediones and 3, 4-dihydropyrimidin-2(1H)-ones under solvent-free conditions

Research on Chemical Intermediates - A novel dicationic Brönsted acidic ionic liquid based on pyrazine has been prepared and characterized by FTIR, 1H NMR, 13C NMR, MS, thermal gravimetric and...     

两种季铵盐型离子液体钯配合物的合成

以苯甲酰肼和4-醛基吡啶为原料,经过缩合反应制备亚胺型化合物1,分别与苄氯和对二苄氯结合制备了两个新型的离子液体型亚胺配体2和3,配体2和3分别与醋酸钯反应得到新型离子液体型钯配合物4和离子液体型自组装钯配合物5,其结构经¹H NMR,¹³C NMR,IR和MS确证。