Thermophysical behaviour of monofunctional acrylate and liquid crystal systems

The phase behavior of monofunctional acrylate and low molecular weight nematic liquid crystals (LC) is considered. Systems involving the monomeric 2-ethylhexylacrylate (2-EHA), the eutectic LC mixture known as E7 and the 4-cyano-4^′-n-pentyl-biphenyl (5CB) are investigated. A similar investigation is performed on mixtures involving a polymer poly-2-EHA with molecular weight M_w=48,000 g/mol and both LCs. The experimental phase diagrams are established using polarized optical microscopy and analyzed using a theoretical formalism which combines the Flory-Huggins theory of isotropic mixing and the Maier-Saupe theory of nematic order. The results lead to characterization of the miscibility of E7 and 5CB with monomeric and analogous polymeric 2-EHA systems.     

Study of the surface and interfacial tensions in systems containing a low molar mass liquid crystal

The surface tension of a low molar mass liquid crystal (LMMLC), 4-cyano-4'-n-heptyloxybiphenyl (70CB), was measured as a function of temperature using the pendant drop method, forming drops of different volumes ranging from 5 to 11 mm³. Contact angles formed by drops of 70CB in the nematic and isotropic phases on plates of polystyrene (PS) and of a liquid crystal polymer (LCP), VECTRA A910, were also measured. Only large drops could be used for surface tension analysis. It was shown that in the nematic phase the surface tension of 70CB decreases with increasing temperature, and that in the isotropic phase the surface tension increases with increasing temperature. Using the values of contact angle and of surface tension of 7OCB it was possible to evaluate the interfacial energy between 7OCB and PS and between 7OCB and VECTRA. The interfacial energy between 7OCB and PS, and between 7OCB and VECTRA, decreased with increasing temperature for ranges of temperatures corresponding to both phases of 70CB.     

Study of the surface and interfacial tensions in systems containing a low molar mass liquid crystal

The surface tension of a low molar mass liquid crystal (LMMLC), 4-cyano-4'-n-heptyloxybiphenyl (70CB), was measured as a function of temperature using the pendant drop method, forming drops of different volumes ranging from 5 to 11 mm³. Contact angles formed by drops of 70CB in the nematic and isotropic phases on plates of polystyrene (PS) and of a liquid crystal polymer (LCP), VECTRA A910, were also measured. Only large drops could be used for surface tension analysis. It was shown that in the nematic phase the surface tension of 70CB decreases with increasing temperature, and that in the isotropic phase the surface tension increases with increasing temperature. Using the values of contact angle and of surface tension of 7OCB it was possible to evaluate the interfacial energy between 7OCB and PS and between 7OCB and VECTRA. The interfacial energy between 7OCB and PS, and between 7OCB and VECTRA, decreased with increasing temperature for ranges of temperatures corresponding to both phases of 70CB.     

Dielectric and orientation effects of ‘classical’ and supramolecular liquid crystals self-assembly

Fragments of phase diagrams of binary systems containing 4-pentyloxy-4?-cyanobiphenyl (5OCB) and 4-(ω-hydroxyalkyloxy)-4?-cyanobiphenyl (HO3OCB, HO6OCB and HO9OCB) were obtained. The temperature range expansion of the nematic phase at mixing of the components was established. The dielectric and optical properties of binary mixtures were studied. A significant increase in the dielectric anisotropy was observed when the ‘classical’ liquid crystal (LC) was mixed with supramolecular HOnOCB. From the data on birefringence and the ¹H NMR spectra, temperature dependences of the orientational order parameter of the ‘classical’ LC + supramolecular LC systems were obtained. There is a good agreement between S values obtained by independent methods. The invariability of the order parameter at mixing 5OCB with HO3OCB and HO9OCB and some growth in systems containing HO6OCB were observed. On the basis of quantum chemical calculations, the analysis of the most probable types of components association in the systems 5ОСВ + HOnOCB was carried out. From the analysis of Kirkwood correlation factors, the main role of competition between the two mechanisms of intermolecular interaction was revealed.     

Low-temperature dynamics of (S)-4-(1-methylheptyloxy)-4ʹ-cyanobiphenyl (8*OCB) and (S)-4-(2-methylbutyl)-4ʹ-cyanobiphenyl (5*CB) in disordered crystalline and glassy phases

The inelastic neutron scattering (INS) spectra were measured for two materials of chiral molecules: (S)-4-(1-methylheptyloxy)-4?-cyanobiphenyl (8*OCB) and (S)-4-(2-methylbutyl)-4?-cyanobiphenyl (5*CB), revealing solid state polymorphism with two partially disordered crystalline phases I and II and glassy state of liquid and of crystalline phase in each substance. The experiments were performed in the energy range up to 30 µeV in the temperature range from 4 to 35 K. For 8*OCB the elastic scans were measured as well up to 300 K illustrating well the phase diagram. For all solid phases of both substances in the µeV range of INS spectra, the existence of the excess density of vibrational states over that typical for fully ordered crystalline phases was evidenced. Contribution of this so-called boson peak occurred to be much larger in glass of isotropic phase than in the phase II and glass of phase I of 8*OCB, while for 5*CB it was larger in the phase I and glass of phase II than in glass of cholesteric phase. The quasi-elastic broadening of elastic peak corresponding to stochastic reorientations in the ns time scale was detected for both substances. Comparison of the results obtained for glassy and crystalline phases of 8*OCB and 5*CB compounds have been given and confronted with those obtained previously in meV energy range.     

Synthesis and properties of organic–inorganic hybrid liquid crystal gels

Organic–inorganic hybrid liquid crystal (LC) gels have been synthesised by the thiol-ene reaction of a multifunctional cyclic siloxane, 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (TVMCTS) and alkane dithiols, 1,6-hexanedithiol (HDT) or 1,9-decanedithiol (DDT), in LC matrices, 4-cyano-4?-pentylbiphenyl (5CB) or 4′-n-octyl-4-cyano-biphenyl (8CB). The LC gels were prepared in an isotropic phase at 70°C or mesophases at 25°C using radical initiators. The phase transition temperatures from a mesophase to an isotropic phase of the resulting gels were lower than those of the original LCs. The gels containing 8CB (8CB gels) prepared at 25°C showed two phase transitions: smectic-to-nematic and nematic-to-isotropic transitions. By contrast, the 8CB gels synthesised in the isotropic phase showed only one phase transition from smectic phase directly to isotropic phase. Reaction conversions in the LC gels prepared at 70°C were higher than that in the gels prepared at 25°C. Scanning microscopic light scattering analysis of the LC gels cleared homogeneous small size mesh with a small amount of large defect. Polarisation micrographs of the LC gels showed framed optical textures derived from the LC molecules at room temperature. The LC gels containing more than 90 wt% of LC showed electro-optic response.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4′-hexyloxybiphenyl (6OCB) and in 4-cyano-4′-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

Morphological studies of a hydrogen-bonded LC polymer obtained by photopolymerization in LC solvents

Anisotropic morphologies and the phase behaviour of a hydrogen-bonded LC polymer obtained by photopolymerization in two kinds of LC solvent are discussed. The hydrogen-bonded LC monomer, 4-(6-acryloyloxyhexyloxy) benzoic acid (A6OBA), was photopolymerized in 4-cyano-4'-hexyloxybiphenyl (6OCB) and in 4-cyano-4'-undecyloxybiphenyl (11OCB), which show a nematic phase and a smectic A phase, respectively. After photo-polymerization, the LC media were removed by extraction and the pure polymer was observed by scanning electron microscopy. SEM images showed that the polymer possessed fibrous morphology with a fibre diameter of a few micrometers, based on polymerization-induced phase separation. The overall geometries reflected typical LC characteristics such as schlieren and focal-conic fan textures. It was found that the hydrogen bond between benzoic acid groups in the monomer was rigid enough to fix the anisotropic phase-separated structure forming during the early stage of phase separation; however, it could not permanently maintain the fibre structure due to dissociation at elevated temperature. X-ray measurements revealed that a well developed layer structure of the hydrogen-bonded mesogen existed in the polymer obtained from the smectic phase of 11OCB, whereas a polymer layer structure could develop only partially from the nematic phase of 6OCB.     

Dielectric analysis of the interaction of nematic liquid crystals with carbon nanotubes

Multi-walled carbon nanotubes (MWCNTs) have been shown to self-organise, and when added as a guest to form a nanocomposite, their director couples with an organic liquid crystal (LC) host. Here, effects of MWCNTs on the low-frequency dielectric properties and Fréedericksz transition of the LC 4-cyano-4?-pentylbiphenyl (5CB) are studied. Anti-parallel electro-optic cells were filled with nanocomposites at weight percent concentrations of MWCNT to 5CB of: 0 (neat), 0.01, 0.10, 0.20, and 0.50. Low concentration was chosen to minimise Van der Waals attraction normally responsible for aggregation of MWCNTs. Dielectric relaxation spectroscopy was used to study interactions between MWCNTs and 5CB at frequencies from 20 Hz to 1 MHz. We propose a mechanism based upon measurements of the complex dielectric function which suggests that MWCNTs act as a slow-moving boundary within the sample cell at low frequencies and low applied electric fields, where the MWCNTs reorient along with the 5CB LC molecules. At higher frequencies and larger applied electric fields, the 5CB molecules rotate about their long axes while motion of the MWCNTs is frozen out.     

Orientational ordering in nematic liquid crystals 1CB-d11 dissolved in 5CB-d6

The ²H-N.M.R. spectra of mixtures of the non-mesogenic compound 4-cyano-4'-methylbiphenyl (1CB) and the nematic liquid crystal 4-cyano-4'-n-pentylbiphenyl (5CB) are measured as a function of concentration and temperature. Concentrations of up to 25 mol% 1CB have no effect on the N.M.R. spectrum and therefore on the orientational order of 5CB at a given reduced temperature. The order matrix of the 1CB is calculated from the measured quadrupole couplings. The results are analysed in terms of a model for orientational order that includes two anisotropic terms: (a) interaction between the molecular quadrupole moment and the mean electric field gradient of the medium, and (b) short range repulsive interactions. An estimate of the molecular quadrupole moment tensor of 1CB is obtained from the analysis.     

Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.     

Cyanobiphenyl-based liquid crystal dimers and the twist-bend nematic phase

ABSTRACT

The synthesis and characterisation of several members of the 1,ω-bis(4-cyanobiphenyl-4′-yl) alkane (CBnCB) and the 1-(4-cyanobiphenyl-4′-yloxy)-ω-(4-cyanobiphenyl-4′-yl) alkane (CBnOCB) homologous series are reported. The new odd members described CB5CB, CB13CB, CB4OCB, CB8OCB and CB10OCB all exhibit twist-bend nematic and nematic phases. The members of these series already reported in literature, CB7CB, CB9CB, CB11CB and CB6OCB, were also prepared in order to allow for a direct comparison of their transitional properties. The properties of these dimers are also compared to those of the corresponding members of the 1,ω-bis(4-cyanobiphenyl-4,-yloxy) alkanes (CBOnOCB). For any given total spacer length, for odd members of these series, the nematic–isotropic transition temperatures and associated entropy changes are greatest for the CBOnOCB dimer and lowest for the CBnCB dimer. These trends are understood in terms of molecular shape. For short spacer lengths, the twist-bend nematic–nematic transition temperature (T_NTBN) is higher for the CBnOCB series than for the CBnCB series but this is reversed as the spacer length increases. Of the CBOnOCB dimers, a virtual value of T_NTBN was estimated for CBO3OCB and T_NTBN was measured for CBO5OCB. These values are considerably lower than those observed for the corresponding members of the CBnCB or CBnOCB series. The dependence of T_NTBN on molecular structure is discussed not only in terms of the molecular curvature but also in the ability of the molecules to pack efficiently. As the temperature range of the preceding nematic phase increases, so the twist-bend nematic–nematic transition entropy change decreases and the transition approaches second order for the longer spacers. For comparative purposes, the transitional behaviour of the even-membered dimers CB6CB, CB5OCB and CBO4OCB is reported and differences accounted for in terms of molecular shape.     

Detecting and differentiating Escherichia coli strain TOP10 using optical textures of liquid crystals

We report a method for detecting Escherichia coli using a nematic liquid crystal (LC), 4-cyano-4′-pentylbiphenyl (5CB). Among three E. coli strains tested, TOP10 strain grown on agar plates induces a homeotropic orientation of LCs whereas DH5α and JM109 strains do not. This results in a clear distinction in the optical appearance of LCs as either uniformly dark or bright under polarised light. The LC-based method provides a simple, rapid and low-cost method of identifying E. coli strains.     

松果状纳米氧化铁对液晶电光性能的影响

液晶材料被广泛应用于液晶显示器(LCD)中,但是由于液晶中杂质的存在,导致液晶的应用电压变大,增加了能耗。 为了降低应用中的阈值电压和饱和电压,通常向液晶中添加纳米颗粒来提高电光性能。 本文采用简单的化学沉淀法制备了形貌均一,大小尺寸均匀的松果状氧化铁(P-Fe₂O₃)纳米颗粒。 将其掺杂到向列相液晶4-氰基-4'-戊基联苯(4-cyano-4'-pentylbiphenyl,5CB)中,结果表明,掺杂质量分数为0.5%时,电光性能达到最优,阈值电压和饱和电压分别降低24.8%和45.2%,对比度增大46%,响应时间降低至17.6 ms,此性能优于相同条件下掺杂普通Fe₂O₃纳米颗粒的向列相液晶5CB,其阈值电压和饱和电压分别降低15%和16%。 这归因于松果状Fe₂O₃纳米颗粒可以在向列相液晶5CB中均匀分散,其粗糙的表面吸附了液晶中的杂质离子,减少了杂质离子的屏蔽效应,从而提高了电光性能。     

A neutron reflection study of surface enrichment in nematic liquid crystals

The interfacial adsorption properties of several different dopants in cyanobiphenyl liquid crystals have been measured using specular neutron reflection. It was found that a partly fluorinated analogue of 11OCB, called F17, adsorbed strongly at the interface between 5CB and air but it was not adsorbed at the interface between 5CB and a solid substrate treated with cetyl trimethyl ammonium bromide (CTAB). The concentration dependence of the adsorption at the air interface was well described by the Brunauer, Emmett and Teller (BET) model, adapted for solutions rather than the gas phase. The isotherms are determined by two equilibrium constants: K(S) for adsorption of the dopant directly at the interface and K(L) for adsorption onto previously adsorbed dopant. The temperature dependence of K(S) indicated that the adsorption enthalpy is not influenced by the phase of the 5CB and its value of -29 kJmol(-1) is consistent with physical adsorption. The value of K(L) is zero in the isotropic phase but increases rapidly on cooling in the nematic phase suggesting that the F17 is less compatible with nematic than isotropic 5CB. The smallest layer thicknesses (~18 ?) suggest that the F17 molecules are approximately perpendicular to the surface. The other dopants studied were components of the E7 mixture: 8OCB and 5CT. No adsorption was found for 8OCB but 5CT showed adsorption at a CTAB treated solid interface when present in 5CB at the 10% level. In this case, the value of K(S) was much smaller than for F17 but the value of K(L) was such that an exponential concentration profile (predicted by the BET model) was observed with characteristic thickness of ~200 ?. The results demonstrate the potential for very precise control of surface properties in liquid crystal devices by using appropriate dopants.     

Influence of the remanent polarisation on the liquid crystal alignment in composite films of ferroelectric poly(vinylidene fluoride-trifluoroethylene) and a cyanobiphenyl-based liquid crystal

Polymer-dispersed liquid crystals (PDLCs) of ferroelectric poly(vinylidene fluoride-trifluoroethylene) and nematic 4-cyano-4?-n-hexylbiphenyl (6CB) or 4-cyano-4?-n-pentylbiphenyl (5CB) were prepared to study the effect of the remanent polarisation of the polymer on the liquid crystal alignment. We measured the macroscopic alignment of the liquid crystal molecules in the thickness direction by means of Infrared Transition-Moment Orientational Analysis. Electrical poling at 100 V/µm caused an increased order parameter up to 0.15. After subsequent annealing above the nematic-to-isotropic phase-transition temperature, the order parameter was reduced to 0.02. Nevertheless, the order parameter was still higher than for non-poled film indicating a slight orientation in thickness direction. Both values are lower than those expected from model calculations. In agreement with dielectric measurements, we attribute this result to the shielding effect of mobile charge carriers within the liquid crystal inclusions.     

New room temperature nematogens by cyano tail termination of alkoxy and alkylcyanobiphenyls and their anchoring behavior on metal salt-decorated surface

ABSTRACT

A series of cyano tail-terminated alkoxy and alkyl cyanobiphenyl compounds and some cyano-p-terphenyl derivatives were synthesized and mesogenic properties described. Comparison with the K series and M series indicates that the terminal cyano group generally enhances the supercooling of the molecules. Furthermore, several binary LC mixtures formed by the cyano tail-terminated compounds were found exhibiting promising room temperature nematic phases ranges comparable to the commercial quaternary mixture E7. The equimolar binary mixture of CN5OCB and CN7OCB shows homeotropic ordering at the metal salts-decorated surfaces and planar ordering at the free surface, which is consistent with G_BE values we calculated. As such, these materials are promising candidates for sensor devices which display a rapid response to a variety of analytes.     

液晶/水界面上的氢键作用诱导液晶取向转变

本文提出液晶/水界面上氢键作用可以诱导热致型液晶(戊基联苯氰,简称: 5CB)发生取向转变.当液晶5CB膜接触酚类(如对硝基苯酚)水溶液的时候,由于酚类物质的酚羟基与液晶5CB分子中的氰基在液晶水界面上形成了氢键,在氢键的作用下使得液晶5CB由平行取向转变成了垂直取向.此外,还利用了液晶传感器可视化了酚类物质与牛血清蛋白(BSA)之间的相互作用.本文的研究结果可为研究液晶/水界面上的界面现象提供新的思路,并且有望开发出基于氢键作用的液晶生物化学传感技术.     

Odd-even effect in miscibility of main-chain liquid crystal polymers with low molar mass nematogens

Qualitative phase diagrams were constructed using the contact method for binary mixtures of several chemically-distinct low molar mass nematogens (LMMN) with a main chain liquid crystal polymer (TPB-x) which has a mesogenic group, 1-(4-hydroxy-4'-biphenyl)-2-(4-hydroxy phenyl) butane, separated by flexible alkyl spacers of variable length, x. Several interesting effects were observed. TPB-x was found to exhibit an odd-even variation in miscibility in the nematic state (2n + 1 = miscible, 2n=immiscible) with 4'-pentyl-4-cyanobiphenyl (5CB), but not with 4'-pentyloxy-4-cyanobiphenyl (5OCB) in which most polymers were completely miscible. On prolonged isothermal annealing in the biphasic region in 5CB, TPB-2n exhibited spherulitic crystallization of the liquid crystal polymer. These observations are shown to be qualitatively consistent with a modification of the Flory-Huggins theory by Brochard et al.     

A simple strategy for detecting synthetic polymers on solid surfaces using liquid crystal

In this study, we developed a liquid crystal (LC)-based detection method for polymer films synthesized on solid surfaces. A dark to bright transition in the optical appearance of nematic 4-cyano-4′-pentylbiphenyl (5CB) was observed after transferring a poly(methyl methacrylate) (PMMA) film onto a glass substrate functionalized with n-octyltrichlorosilane (OTS). This phenomenon indicates an orientational transition of 5CB from a homeotropic to a planar-random state. The optical response of 5CB was then evaluated directly through polymerization reactions on the OTS-functionalized glass substrate. Polymer films of PMMA, poly(glycidyl methacrylate) (PGMA), and poly(dimethylsiloxane) (PDMS) were synthesized on OTS surfaces covered with their reaction mixtures. All polymer films displayed bright signals of 5CB, which corresponded to the planar-random orientation of LCs. However, no change in orientation was observed for the control experiments. We confirmed the formation of polymer films on the OTS surface using atomic force microscopy. Overall, our results suggest that LCs can be used to construct optical monitoring systems for the product of polymerization reactions.