Effect of charge on the standard partial molar volumes and heat capacities of organic electrolytes in methanol and water

Previously developed additivity schemes for nonelectrolytes have been used to estimate and for tetraalkyl and tetraphenyl methanes in methanol and water. Corrections have been applied to the thermodynamic values of these model compounds to account for a variation in size of the central atom, and these were used to ascertain the effect of charge on and of alkyl and phenyl quaternary ions having N, P and B as central atoms. Investigations of R₄NBr, (R=methyl to heptyl) salts show that the charge effect on and of R₄N⁺ ions is large and relatively independent of ion size suggesting that the solvent molecules penetrate the ions. The ability to estimate and of the quaternary ions in the bromide salt solutions has made it possible to make ionic assignments with some confidence; (Br^–) has been evaluated as 19.7±2 and 30.2±7 cm³-mol^–1 and (Br^–) as –83±7 and –68±30 J-K^–1-mol^–1 in methanol and water, respectively. The use of organic ions for making ionic assignments of and is critically examined and comparisons with other assignments are made. The scaled particle theory is employed to divide the heat capacities of electrolytes into cavity and interaction contributions.     

Volumetric Properties of Binary Mixtures of Acetonitrile and Chloroalkanes at 25°C and Atmospheric Pressure

Excess molar volumes for binary mixtures of acetonitrile + dichloromethane, acetonitrile + trichloromethane, and acetonitrile + tetracloromethane at 25°C have been used to calculate partial molar volumes , excess partial molar volumes , and apparent molar volumes of each component as a function of composition. The V _m ^Evalues are negative over the entire composition range for the systems studied. The applicability of the Prigogine–Flory–Patterson theory was explored. The agreement between theoretical and experimental results is satisfactory for the systems with dichloromethane and tetrachloromethane. For the unsymmetrical behavior of the system with trichloromethane, however, the agreement is poor.     

Iodine Hydrolysis Equilibrium

The equilibrium constant for the hydrolytic disproportionation of I₂

Solubility of Oxygen in Some 1-1, 2-1, 1-2, and 2-2 Electrolytes as a Function of Concentration at 25°C

The solubility of oxygen has been measured in a number of electrolytes [(LiCl, KCl, RbCl, CsCl, NaF, NaBr, NaI, NaNO₃, KBr, KI, KNO₃, CaCl₂, SrCl₂, BaCl₂, Li₂SO₄, K₂SO₄, Mn(NO₃)₃)] as a function of concentration at 25°C. The solubilities, mol (kg-H₂O)^–1, have been fitted to a function of the molality m (standard deviation < 3mol-kg^–1)

Dissociation Constants of Protonated Cysteine Species in NaCl Media

The sulfur-containing biomolecule, cysteine has a role in physiological and natural environment because of its strong interactions with metals. To understand these interactions of metals with cysteine, one needs reliable dissociation constants for the protonated cysteine species [ CH(CH₂SH)COOH; H₃B⁺]. The values of dissociated constants, p , for protonated cysteine species (H₃B⁺ H⁺ + H₂B, K ₁; H₂B H⁺ + HB^–,K ₂; HB^– H⁺ + B^2–,K ₃) were determined from potentiometric measurements in NaCl solutions as a function of ionic strength, 0.5–6.0 mol-(kgH₂O)^–1 and between 5, and 45°C. The equations

Comprehensive Investigation of Yttrium and Rare Earth Element Complexation by Carbonate Ions Using ICP–Mass Spectrometry

Carbonate stability constants for yttrium and all rare earth elements have been determined at 25°C and 0.70 molal ionic strength by solvent exchange and inductively coupled plasma–mass spectrometry (ICP–MS). Measured stability constants for the formation of and from M³⁺ are in good agreement with previous direct measurements, which involved the use of radio-chemical techniques and trivalent ions of Y, Ce, Eu, Gd, Tb, and Yb. Direct ICP–MS measurements of and formation constants are also in general agreement with modeled stability constants for the metals La, Pr, Nd, Sm, Dy, Ho, Er, Tm, and Lu, based on linear-free energy relationship (LFER). The experimental procedures developed in this work can be used for assessing the complexation behavior of other geochemically important ligands such as phosphate, sulfate, and fluoride.     

Aqueous Geochemistry of Rare Earth Elements and Yttrium. XII: Potentiometric Stability Constant Determination of Bis-Tris Complexes with La, Nd, Eu, Gd, Yb, Dy, Er, Lu, and Y

Conditional stability constants of 2-[bis(2-hydroxyethyl)amino]-2(hydroxymethyl)-1,3-propanediol (BT) complexes of trivalent rare earth element (Ln) ions (La, Nd, Eu, Gd, Yb, Dy, Er, Lu) and Y were determined potentiometrically in aqueous NaCl solutions at 30°C and 0.1 M ionic strength. Least-squares fitting shows that, at <0.04 molal BT, the complex LnBT³⁺ is dominant, with LnBT₂ ³⁺ forming a secondary complex, where:

Solubility of Rhodochrosite (MnCO3) in NaCl Solutions

The solubility of rhodochrosite (MnCO₃) at 25°C under constant carbon dioxide partial pressure p(CO₂) was determined in NaCl solutions as a function of ionic strength I. The dissolution of MnCO₃(s) for the reaction

Kinetics and Equilibria for Complex Formation between Palladium(II) and Chloroacetate

Kinetics and equilibria for the formation of a 1:1 complex between palladium(II) and chloroacetate were studied by spectrophotometric measurements in 1.00 mol HClO₄ at 298.2 K. The equilibrium constant, K, of the reaction

On the Pressure and Electric Field Dependencies of the Relative Permittivity of Liquids

The dependencies of the relative permittivity of over 50 liquids on the pressure P, as , and of some 40 liquids on the (square of the) electric field E at ambient conditions, as were obtained from literature data. The function was fitted to a simple expression in and the compressibility, _T. These data were used to obtain the limiting slope for the partial molar volumes and the electrostriction of electrolytes in various solvents.     

Solubility of Siderite (FeCO3) in NaCl Solutions

The solubility of siderite (FeCO₃) at 25°C under constant CO₂ partial pressure [p(CO₂)] was determined in NaCl solutions as a function of ionic strength. The dissolution of FeCO₃(s) for the reaction

Molecular Structure of tert-Butylazide: A Gas-Phase Electron Diffraction and Quantum Chemical Study

The molecular structure of tert-butylazide has been determined by gas-phase electron diffraction and quantum chemical calculations. The HF/6-31G* and B3LYP/6-31G** calculations yielded near C _s symmetry for the tert-butyl group, anti conformation of the (C)N—N bond with respect to one of the bonds, and an essentially free rotation around the bond with a 0.34 kcal/mol energy difference between syn and anti conformations of the CNNN moiety, the anti being the more stable form. The electron diffraction analysis was carried out by modeling a mixture of conformational isomers, generated by rotating the terminal nitrogen of the azide group, using a computed rotational potential. The data are consistent with C _s symmetry for the tert-butyl group. The bond, however, was found to be rotated out of the anti position, with respect to one of the bonds, by 12.5(12)°. The electron diffraction analysis yielded the following bond lengths (r _g), bond angles, and torsional angles: , .     

Configuration and conformation of substituted 1,3,2-dioxaarsenanes

The configuration and conformations often 2-, 4-, and 5-substituted 1,3,2-dioxaarsenanes were studied from their PMR spectra. Inversion of the shielding constants of protons in the 4, 6, and 5 positions and of methyl groups in the 5 position was established, and the axial orientation of the As-Cl and As-OR bonds, the equatorial orientation of the 4-CH₃ group, and the chair conformation of the six-membered heteroring were proved. The anisotropies of the diamagnetic susceptibility were estimated for the first time: and (dipole approximation); and (nondipole approximation). The cyclic torsion angle (= 58°) as found for 2-chloro-1,3,2-dioxaarsenane by the R-factor method. Conclusions regardiwng the conformation of the ring and substituents were confirmed by a study of the specific effect of an aromatic solvent on the position of the resonance lines.Communication I from the series Investigation of the Stereochemistry of Organic Arsenic Compounds by NMR Spectroscopy.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 457–463, April, 1973.     

Partial molal heat capacities of aqueous tetraalkylammonium bromides as functions of temperature

Enthalpies of solution have been measured from 5 to 85°C for aqueous tetraethyl- and tetrapropylammonium bromides, and the integral heat method is employed to evaluate for these electrolytes over a wide temperature range. Data taken from the literature have been used to evaluate for aqueous Bu₄NBr over a similar temperature range. These data, along with similar data for Me₄NBr, previously reported, have been used to evaluate absolute ionic heat capacities. While the absolute values agree only qualitatively with two other methods of division, the temperature dependences of the three methods essentially agree up to 65°C. Heat capacities due to structural effects on the solvent, obtained by subtracting the inherent heat capacities of the ions, are extraordinarily positive for all four tetraalkylammonium ions and have negative temperature coefficients, indicating that all four ions, including the tetramethylammonium ion, are structure-making ions.     

Molecular Structure of 1,2,4,5-Tetracyanobenzene from Gas-Phase Electron Diffraction and Theoretical Calculations

The molecular structure of 1,2,4,5-tetracyanobenzene has been determined by gas-phase electron diffraction and by ab initio calculations at several levels of theory. The electron diffraction study indicates an elongation of the aromatic ring along the (H)CC(H) axis, characterized by angular deformation of the benzene ring and lengthening of the (NC)C—C(CN) bonds. The following bond lengths (r _g) and bond angles were obtained by electron diffraction: .     

Molecular Structure and Conformation of p-Bis(trimethylsilyl)benzene: A Study by Gas-Phase Electron Diffraction and Theoretical Calculations

The molecular structure and conformation of p-bis(trimethylsilyl)benzene have been investigated by gas-phase electron diffraction, ab initio MO calculations at the HF/6-31G*, MP2(f.c.)/6-31G*, and B3LYP/6-31G* levels, and MM3 molecular mechanics calculations. The calculations indicate the syn- and anti-coplanar conformations, with two bonds in the plane of the benzene ring, to be energy minima. The perpendicular conformations, with two bonds in a plane orthogonal to the ring plane, are transition states. The two coplanar conformers have nearly the same energy with a low interconversion barrier, 0.3–0.5 kJ mol^–1. The calculated lengths of the and bonds differ by only a few thousandths of an angstrom, in agreement with electron diffraction results from molecules containing either or bonds. The geometrical distortion of the benzene ring in p-bis(trimethylsilyl)-benzene may be described by superimposing independent distortions from each of the two SiMe₃ groups. The electron diffraction intensities from a previous study (Rozsondai, B.; Zelei, B.; Hargittai, I. J. Mol. Struct. 1982, 95, 187) have been reanalyzed, imposing constraints from the theoretical calculations, and using a model based on a 1:1 mixture of the two coplanar conformers. The effective torsion angles of the SiMe₃ groups may indicate nearly free rotation. Important geometrical parameters from the present electron diffraction analysis are , and . While the mean bond lengths are virtually the same from the previous and present analyses, the new ipso angle is in better agreement with the MO calculations [HF, 116.9° MP2(f.c.), 117.1° B3LYP, 116.9°].     

Modeling Heat Capacities of High Valence-Type Electrolyte Solutions with Pitzer's Equations

Apparent molar heat capacities C _p, for 71 rare earth chlorides, nitrates, and perchlorates, alkaline earth and transition metal chlorides, nitrates, and perchlorates, and alkali metal carbonates and sulfates have been fitted to the Pitzer equation for heat capacities. The apparent molar heat capacities at infinite dilution (equal to the standard partial molar heat capacity, ) were used to evaluate a set of best ionic heat capacities, from which improved values of for the electrolytes were calculated. These were then used in the Pitzer equation to reevaluate the higher Pitzer coefficients. The Pitzer coefficients so evaluated can express, in most cases, the behavior of C _p, within experimental error from infinite dilution to the upper limit of the data. Ionic heat capacities have been correlated with the absolute entropies of the ions by statistically assigning the ionic heat capacities to obtain the best linear fit.     

Charge-Assisted Hydrogen Bonds and Halogen-Halogen Interactions in Organic Salts: Benzylammonium Benzoates and Pentafluorobenzoates

The enhanced influence of charge-assisted hydrogen bonds upon the resulting crystal structure in the presence of competing noncovalent interactions has been examined using single-crystal X-ray diffraction. The crystal structures of six organic salts are presented: 4-chlorobenzylammonium 2,4-dichlorobenzoate, 3-chlorobenzylammonium 2,4-dichlorobenzoate, 4-methylbenzylammonium pentafluorobenzoate, 4-chlorobenzylammonium pentafluorobenzoate, 3-methylbenzylammonium benzoate, and 4-chlorobenzylammonium benzoate monohydrate. All structures are dominated by charge-assisted hydrogen bonds that generate either one-dimensional ribbons or two-dimensional sheets. The structural influence of weaker intermolecular interactions is limited as there are very few short, halogen-halogen, -, or distances in this series of compounds.     

Partial molar heat capacities of selected electrolytes and benzene in methanol and dimethylsulfoxide at 25, 40, and 80°C

A high temperature-high pressure flow heat capacity calorimeter, designed to operate to 350°C and 20 Mpa, has been constructed and tested with aqueous sodium chloride solutions to 80°C. The calorimeter has been used to measure the specific heats for solutions of NaBr, NaClO₄, ₄PBR, NaB₄, and benzene in methanol (MeOH) and dimethylsulfoxide (DMSO) at 40 and 80°C. A commercial calorimeter was used to measure the same systems at 25°C. Apparent molar heat capacities C>_p, have been evaluated and extrapolated to infinite dilution to obtain standard partial molar heat capacities . For electrolytes are positive and insensitive to temperature to 80°C in DMSO, but in MeOH, C _{p, 2} ⁰ for simple electrolytes are negative and become increasingly negative with temperature. The behavior in MeOH is attributed to strong electrostriction by ionic charge and solvation of anions by MeOH molecules which increases with temperature. This is similar to observed behavior of electrolytes in water above 100°C. For benzene is positive in MeOH and DMSO, and increases with temperature.     

Luminescence Behavior of Polynuclear Alkynylcopper(I) Phosphines

A series of soluble trinuclear and tetranuclear copper(I) complexes containing ₃-^l acetylides , and have been synthesized and shown to exhibit rich photoluminescent behavior at room temperature. The electrochemistry of the trinuclear Cu(I) acetylide complexes and the excited-state redox properties of have been investigated. The X-ray crystal structures of and have been determined.