Magnetic solid‐phase extraction based on a polydopamine‐coated Fe3O4 nanoparticles absorbent for the determination of bisphenol A,tetrabromobisphenol A, 2,4,6‐tribromophenol,and (S)‐1,1’‐bi‐2‐naphthol in environmental waters by HPLC

Polydopamine‐coated Fe₃O₄ magnetic nanoparticles synthesized through a facile solvothermal reaction and the self‐polymerization of dopamine have been employed as a magnetic solid‐phase extraction sorbent to enrich four phenolic compounds, bisphenol A, tetrabromobisphenol A, (S)‐1,1′‐bi‐2‐naphthol and 2,4,6‐tribromophenol, from environmental waters followed by high‐performance liquid chromatographic detection. Various parameters of the extraction were optimized, including the pH of the sample matrix, the amount of polydopamine‐coated Fe₃O₄ sorbent, the adsorption time, the enrichment factor of analytes, the elution solvent, and the reusability of the nanoparticles sorbent. The recoveries of these phenols in spiked water samples were 62.0–112.0% with relative standard deviations of 0.8–7.7%, indicating the good reliability of the magnetic solid‐phase extraction with high‐performance liquid chromatography method. In addition, the extraction characteristics of the magnetic polydopamine‐coated Fe₃O₄ nanoparticles were elucidated comprehensively. It is found that there are hydrophobic, π–π stacking and hydrogen bonding interactions between phenols and more dispersible polydopamine‐coated Fe₃O₄ in water, among which hydrophobic interaction dominates the magnetic solid‐phase extraction performance.     

Adsorption of diazinon and fenitothion on MCM-41 and MCM-48 mesoporous silicas from non-polar solvent

The adsorption of two common organophosphorus pesticides, diethoxy-[(2-isopropyl-6-methyl-4-pyrimidinyl)oxy]-thioxophosphorane (diazinon) and dimethoxy-(3-methyl-4-nitrophenoxy)-thioxophosphorane (fenitrothion), by MCM-41 and MCM-48 mesoporous silicas at room temperature was investigated. UVvis and IR spectroscopy, small-angle X-ray diffraction, and the specific surface area analysis (S _BET) were used to study the adsorption behavior of diazinon and fenitrothion. The results show that the MCM-41 and MCM-48 mesoporous silicas adsorb diazinon more efficiently than fenitrothion. The extraction of adsorbed materials from the adsorbents with polar solvents and subsequent analysis by ³¹P NMR showed that the adsorption of diazinon and fenitrothion on mesoporous silicas is destructive and non-destructive, respectively. Nitrogen adsorption measurements showed that the specific surface area of both silicas decreases after the adsorption of pesticides, and the larger effect is observed for diazinon. The article is published in the original.     

Magnetic mixed hemimicelles solid‐phase extraction coupled with high‐performance liquid chromatography for the extraction and rapid determination of six fluoroquinolones in environmental water samples

In this study, a mixed hemimicelle solid‐phase extraction method based on Fe₃O₄ nanoparticles coated with sodium dodecyl sulfate was applied for the preconcentration and fast isolation of six fluoroquinolones in environmental water samples before high‐performance liquid chromatography determination. The main factors affecting the extraction efficiency of the analytes, such as amount of surfactant, amount of Fe₃O₄ nanoparticles, extraction time, sample volume, sample pH, ionic strength, and desorption conditions, were investigated and optimized. The method has detection limits from 0.05 to 0.1 ng/mL and good linearity (r ≥ 09948) in the range 0.1–200 ng/mL depending on the fluoroquinolone. The enrichment factor is ～200. The recoveries (at spiked levels of 1, 5, and 50 ng/mL) are in the range of 79–120%.     

Preparation of carbon coated Fe3O4 nanoparticles and their application for solid-phase extraction of polycyclic aromatic hydrocarbons from environmental water samples

The carbon coated Fe₃O₄ nanoparticles (Fe₃O₄/C) were synthesized by a simple hydrothermal reaction and applied as solid-phase extraction (SPE) sorbents to extract trace polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. The Fe₃O₄/C sorbents possess high adsorption capacity and extraction efficiency due to strong adsorption ability of carbon materials and large surface area of nanoparticles, and only 50 mg of sorbents are required to extract PAHs from 1000 mL water samples. The adsorption attains equilibrium rapidly and analytes are eluted with acetonitrile readily. Salinity and solution pH have no obvious effect on the recoveries of PAHs, which avoids fussy adjustment to water sample before extraction. Under optimized conditions, the detection limits of PAHs are in the range of 0.2–0.6 ng L⁻¹. The accuracy of the method was evaluated by the recoveries of spiked samples. Good recoveries (76–110%) with low relative standard deviations from 0.8% to 9.7% are achieved. This new SPE method provides several advantages, such as high extraction efficiency, high breakthrough volumes, convenient extraction procedure, and short analysis times. To our knowledge, this is the first time that Fe₃O₄/C nanoparticles are used for the pretreatment of environmental water samples.     

Magnetic titanium oxide nanoparticles for hemimicelle extraction and HPLC determination of organophosphorus pesticides in environmental water

We report on a method for the extraction of organophosphorus pesticides (OPPs) from water samples using mixed hemimicelles and magnetic titanium dioxide nanoparticles (Fe₃O₄@TiO₂) modified by cetyltrimethylammonium. Fe₃O₄@TiO₂ nanoparticles were synthesized by a hydrothermal process and then characterized by scanning electron microscopy and Fourier transform IR spectrometry. The effects of the quantity of surfactant, extraction time, desorption solvent, pH value, extraction volume and reuse of the sorbent were optimized with respect to the extraction of OPPs including chlorpyrifos, dimethoate, and trichlorfon. The extraction method was applied to analyze OPPs in environmental water using HPLC along with UV detection. The method has a wide linear range (100–15,000 ng L^?1), good linearity (r?>?0.999), and low detection limits (26–30 ng L^?1). The enrichment factor is ~1,000. The recoveries (at spiked levels of 100, 1,000 and 10,000 ng L^?1) are in the range of 88.5–96.7 %, and the relative standard deviations range from 2.4 % to 8.7 %.

Mesoporous Silica‐coated Magnetic Nanoparticles for Mixed Hemimicelles Solid‐phase Extraction of Phthalate Esters in Environmental Water Samples with Liquid Chromatographic Analysis

To extract, preconcentrate and determine the trace level of environmental contaminants, a novel mixed hemimicelles solid‐phase extraction (MHSPE) method based on mesoporous silica‐coated magnetic nanoparticles (Fe₃O₄/meso‐SiO₂ NPs) as adsorbent was developed for extraction of phthalate esters from water samples. The Fe₃O₄/meso‐SiO₂ NPs were synthesized by using a combination of hydrothermal method and sol‐gel method. The obtained Fe₃O₄/meso‐SiO₂ NPs possessed a large surface area (570 m²/g), superparamagnetism, and uniform mesopores (2.8 nm). MHSPE parameters, such as the amount of surfactant, pH of sample, shaking and separation time, eluent and breakthrough volume that may influence the extraction of analytes greatly, were further investigated. Under the optimized conditions, the extraction was completed in 20 min and a concentration factor of 500 was achieved by extracting 250 mL water sample. Detection limits obtained of butyl‐benzyl phthalate (BBP), di‐n‐butyl phthalate (DnBP), di‐(2‐ethylhexyl) phthalate (DEHP) and di‐n‐cotyl phthalate (DnOP) were 12, 21, 12, and 32 ng/L, respectively. The proposed method exhibited high extraction efficiency and relatively short time for extracting the target compounds.     

High‐throughput multipesticides residue analysis in earthworms by the improvement of purification method: Development and application of magnetic Fe3O4‐SiO2 nanoparticles based dispersive solid‐phase extraction

As a key representative organism, earthworms can directly illustrate the influence of pesticides on environmental organisms in soil ecosystems. The present work aimed to develop a high‐throughput multipesticides residue analytical method for earthworms using solid–liquid extraction with acetonitrile as the solvent and magnetic material‐based dispersive solid‐phase extraction for purification. Magnetic Fe₃O₄ nanoparticles were modified with a thin silica layer to form Fe₃O₄‐SiO₂ nanoparticles, which were fully characterized by field‐emission scanning electron microscopy, transmission electron microscopy, Fourier‐transform infrared spectroscopy, X‐ray diffractometry, and vibrating sample magnetometry. The Fe₃O₄‐SiO₂ nanoparticles were used as the separation media in dispersive solid‐phase extraction with primary secondary amine and ZrO₂ as the cleanup adsorbents to eliminate matrix interferences. The amounts of nanoparticles and adsorbents were optimized for the simultaneous determination of 44 pesticides and six metabolites in earthworms by liquid chromatography with tandem mass spectrometry. The method performance was systematically validated with satisfactory results. The limits of quantification were 20 μg/kg for all analytes studied, while the recoveries of the target analytes ranged from 65.1 to 127% with relative standard deviation values lower than 15.0%. The developed method was subsequently utilized to explore the bioaccumulation of bitertanol in earthworms exposed to contaminated soil, verifying its feasibility for real sample analysis.     

Magnetic core micelles as a nanosorbent for the efficient removal and recovery of three organophosphorus pesticides from fruit juice and environmental water samples

Sodium dodecyl sulfate coated amino‐functionalized magnetic iron oxide nanoparticles were used as an efficient adsorbent for rapid removal and preconcentration of three important organophosphorus pesticides, chlorpyrifos, diazinon and phosalone, by ultrasound‐assisted dispersive magnetic solid‐phase microextraction. Fabrication of amino‐functionalized magnetic nanoparticles was certified by characteristic analyses, including Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. Affecting parameters on the removal efficiency were investigated and optimized through half‐fractional factorial design and Doehlert design, respectively. The analysis of analytes was performed by high‐performance liquid chromatography with ultraviolet detection. Under the optimum conditions, extraction recoveries for 20 ng/mL of organophosphorus pesticides were in the range of 84–97% with preconcentration factors in the range of 134–155. Replicating the experiment in above condition for five times gave the relative standard deviations <6%. The calibration curves showed high linearity in the range of 0.2–700 ng/mL and the limits of detection were in the range of 0.08–0.13 ng/mL. The proposed method was successfully applied for both removal and trace determination of these three organophosphorus pesticides in environmental water and fruit juice samples.     

Dispersive liquid–liquid microextraction based on amine‐functionalized Fe3O4 nanoparticles for the determination of phenolic acids in vegetable oils by high‐performance liquid chromatography with UV detection

A novel dispersive liquid–liquid microextraction method based on amine‐functionalized Fe₃O₄ magnetic nanoparticles was developed for the determination of six phenolic acids in vegetable oils by high‐performance liquid chromatography. Amine‐functionalized Fe₃O₄ was synthesized by a one‐pot solvothermal reaction between Fe₃O₄ and 1,6‐hexanediamine and characterized by transmission electron microscopy and Fourier transform infrared spectrophotometry. A trace amount of phosphate buffer solution (extractant) was adsorbed on bare Fe₃O₄‐NH₂ nanoparticles by hydrophilic interaction to form the “magnetic extractant”. Rapid extraction could be achieved while the “magnetic extractant” on amine‐functionalized Fe₃O₄ nanoparticles was dispersed in the sample solution by vortexing. After extraction, the “magnetic extractant” was collected by application of an external magnet. Some important parameters, such as pH and volume of extraction and desorption solvents, the extraction and desorption time needed were carefully investigated and optimized to achieve the best extraction efficiency. Under the optimal conditions, satisfactory extraction recoveries were obtained for the six phenolic acids in the range of 84.2–106.3%. Relative standard deviations for intra‐ and inter‐day precisions were less than 6.3 and 10.0%, respectively. Finally, the established method was successfully applied for the determination of six phenolic acids in eight kinds of vegetable oils.     

One‐pot synthesis of magnetic zeolitic imidazolate framework/grapheme oxide composites for the extraction of neonicotinoid insecticides from environmental water samples

Magnetic zeolitic imidazolate framework 67/graphene oxide composites were synthesized by one‐pot method at room temperature for the first time. Electrostatic interactions between positively charged metal ions and both negatively charged graphene oxide and Fe₃O₄ nanoparticles were expected to chemically stabilize magnetic composites to generate homogeneous magnetic products. The additional amount of graphene oxide and stirring time of graphene oxide, Co²⁺, and Fe₃O₄ solution were investigated. The zeolitic imidazolate framework 67 and Fe₃O₄ nanoparticles were uniformly attached on the surface of graphene oxide. The composites were applied to magnetic solid‐phase extraction of five neonicotinoid insecticides in environmental water samples. The main experimental parameters such as amount of added magnetic composites, extraction pH, ionic strength, and desorption solvent were optimized to increase the capacity of adsorbing neonicotinoid insecticides. The results show limits of detection at signal‐to‐noise ratio of 3 were 0.06–1.0 ng/mL under optimal conditions. All analytes exhibited good linearity with correlation coefficients of higher than 0.9915. The relative standard deviations for five neonicotinoid insecticides in environmental samples ranged from 1.8 to 16.5%, and good recoveries from 83.5 to 117.0% were obtained, indicating that magnetic zeolitic imidazolate framework 67/graphene oxide composites were feasible for analysis of trace analytes in environmental water samples.     

Synthesis,characterization, and properties of monodispersed magnetite coated multi‐walled carbon nanotube/polypyrrole nanocomposites synthesized by in‐situ chemical oxidative polymerization

This study describes the preparation of a nanocomposites fabricated from monodispersed 4‐nm iron oxide (Fe₃O₄) coated on the surface of carboxylic acid containing multi‐walled carbon nanotube (c‐MWCNT) and polypyrrole (PPy) by in situ chemical oxidative polymerization. High‐resolution transmission electron microscopy images and X‐ray diffraction (XRD) data indicate that the resulting Fe₃O₄ nanoparticles synthesized using the thermal decomposition are close to spherical dots with a particle size about 4 ± 0.2 nm. The resulting nanoparticles were further mixed with c‐MWCNT in an aqueous solution containing with anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate to form one‐dimensional Fe₃O₄ coated c‐MWCNT template for further preparation of nanocomposite. Structural and morphological analysis using field‐emission scanning electron microscopy, high‐resolution transmission electron microscopy, and XRD showed that the fabricated Fe₃O₄ coated c‐MWCNT/PPy nanocomposites are one‐dimensional core (Fe₃O₄ coated c‐MWCNT)‐shell (PPy) structures. The conductivities of these Fe₃O₄ coated c‐MWCNT/PPy nanocomposites are about four times higher than those of pure PPy matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 727–733, 2008     

Dispersive admicelle solid‐phase extraction based on sodium dodecyl sulfate coated Fe3O4 nanoparticles for the selective adsorption of three alkaloids in Gegen‐Qinlian oral liquid before high‐performance liquid chromatography

A novel dispersive admicelle solid‐phase extraction method based on sodium dodecyl sulfate‐coated Fe₃O₄ nanoparticles was developed for the selective adsorption of berberine, coptisine, and palmatine in Gegen‐Qinlian oral liquid before high‐performance liquid chromatography. Fe₃O₄ nanoparticles were synthesized by a chemical coprecipitation method and characterized by using transmission electron microscopy. Under acidic conditions, the surface of Fe₃O₄ nanoparticles was coated with sodium dodecyl sulfate to form a nano‐sized admicelle magnetic sorbent. Owing to electrostatic interaction, the alkaloids were adsorbed onto the oppositely charged admicelle magnetic nanoparticles. The quick separation of the analyte‐adsorbed nanoparticles from the sample solution was performed by using Nd‐Fe‐B magnet. Best extraction efficiency was achieved under the following conditions: 800 μL Fe₃O₄ nanoparticles suspension (20 mg/mL), 150 μL sodium dodecyl sulfate solution (10 mg/mL), pH 2, and vortexing time 2 min for the extraction of alkaloids from 10 mL of diluted sample. Four hundred microliters of methanol was used to desorb the alkaloids by vortexing for 1 min. Satisfactory extraction recoveries were obtained in the range of 85.9–120.3%, relative standard deviations for intra‐ and interday precisions were less than 6.3 and 10.0%, respectively. Finally, the established method was successfully applied to analyze the alkaloids in two batches of Gegen‐Qinlian oral liquids.     

Extraction and determination of flavonoids in fruit juices and vegetables using Fe3O4/SiO2 magnetic nanoparticles modified with mixed hemi/ad‐micelle cetyltrimethylammonium bromide and high performance liquid chromatography

Extraction and determination of three flavonoids (morin, quercetin, and kaempferol) were performed by dispersive magnetic solid phase extraction based on mixed hemi/ad‐micelles and high‐performance liquid chromatography with UV detection. The Fe₃O₄/SiO₂ nanoparticles were synthesized and characterized by X‐ray diffraction, FTIR, scanning electron microscopy, and thermogravimetric analysis. Fe₃O₄/SiO₂ nanoparticles coated with mixed hemi/ad‐micelles cetyltrimethyl ammonium bromide was applied as a sorbent and used for extraction of flavonoids. Effective parameters on the extraction recovery such as amount of magnetic nano particles, volume of cetyltrimethyl ammonium bromide solution with specific concentration, pH of sample solution, adsorption equilibrium time, volume of desorption solvent, and desorption times were evaluated and optimized using fractional factorial design and central composite design. Under the optimum condition limit of detection and linearity were 0.83, 2.7–500.0 for morin, 0.18, 0.7–500.0 for quercetin and, 0.37, 1.3–500.0 µg/L for kaempferol. The extraction recovery with relative standard deviation were 97.88, 1.94 for morin, 95.77, 0.80 for quercetin, and 93.35, 1.45 for kaempferol. The proposed method was applied for simultaneous extraction and determination of flavonoids in several fruit juices and vegetable samples.     

Reprint of: Extraction of fluoxetine from aquatic and urine samples using sodium dodecyl sulfate-coated iron oxide magnetic nanoparticles followed by spectrofluorimetric determination

A new method based on the combination of magnetic solid phase extraction (MSPE) and spectrofluorimetric determination was developed for isolation and preconcentration of fluoxetine form aquatic and biological samples using sodium dodecyl sulfate (SDS) coated Fe₃O₄ nanoparticles (NPs) as a sorbent. The unique properties of Fe₃O₄ NPs including high surface area and strong magnetism were utilized effectively in the MSPE process. Effect of different parameters influencing the extraction efficiency of fluoxetine including the amount of Fe₃O₄ and SDS, pH value, sample volume, extraction time, desorption solvent and time were optimized. Under optimized condition, the method was successfully applied to the extraction of fluoxetine from water and urine samples and absolute recovery amount of 85%, detection limit of 20 μg L⁻¹ and a relative standard deviation (RSD) of 1.4% were obtained. The method linear response was over a range of 50–1000 μg L⁻¹ with R² = 0.9968. The relative recovery in different aquatic and urine matrices were investigated and values of 80% to 104% were obtained. The whole procedure showed to be conveniently fast, efficient and economical for extraction of fluoxetine from environmental and biological samples.     

Preparation of ionic liquid‐modified magnetic nanoparticles based on thiol‐ene click chemistry for the analysis of polycyclic aromatic hydrocarbons in water and smoked meat samples

In the present study, ionic liquid (IL)‐modified Fe₃O₄ magnetic nanoparticles (Fe₃O₄) were synthesized by the thiol‐ene click reaction for magnetic solid‐phase extraction (MSPE) of polycyclic aromatic hydrocarbons (PAHs) in water and smoked meat samples. An IL 1‐vinyl‐3‐butylimidazolium bromide was firstly synthesized, and then immobilized on the surface of thiol group‐functionalized Fe₃O₄ via a thiol‐ene click reaction. The as‐synthesized Fe₃O₄@ILs were characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. Various parameters (including the amount of adsorbent, extraction time, sample volume, and desorption conditions) affecting MSPE were optimized. Under the optimum conditions, the limits of detection of four PAHs in the range of 0.6–7.2 ng/L were obtained using high‐performance liquid chromatography–ultraviolet detection. The accuracy of the method was assessed by recovery measurements on spiked real samples and good recovery of 80–108% with relative standard deviations lower than 8.16% was achieved. The enrichment factors ranging from 699 to 858 were obtained for the analytes. This result indicated that the proposed method had great potential for sample preparation.     

Ionic‐liquid‐modified magnetic nanoparticles as a solid‐phase extraction adsorbent coupled with high‐performance liquid chromatography for the determination of linear alkylbenzene sulfonates in water samples

Novel ionic‐liquid‐functionalized Fe₃O₄ magnetic nanoparticles were synthesized by the thiol‐ene click reaction. The prepared functionalized Fe₃O₄ nanoparticles possessed multiple interactions, such as electrostatic, hydrophobic, and π–π interactions. The functionalized Fe₃O₄ nanoparticles were characterized by using Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometry, and transmission electron microscopy. Four kinds of linear alkylbenzene sulfonates, namely, sodium decylbenzenesulfonate, sodium undecylbenzene sulfonate, sodium dodecylbenzenesulfonate, and sodium tridecylbenzenesulfonate, were selected as model compounds to evaluate the applicability of adsorbents for extraction and subjected to high‐performance liquid chromatography analysis. In addition, the effects of various parameters, such as sorbent amount, pH value, ionic strength, sample volume, extraction time, and elution conditions on extraction efficiency were studied in detail. Under the optimum conditions, good linearities were attained, with correlation coefficients between 0.9912 and 0.9968. The proposed method exhibited limits of detection ranging from 0.061 to 0.099 μg/L for all the target analytes. The spiked recoveries of the target analytes in real water samples ranged from 86.3 to 107.5%, with relative standard deviations lower than 7.96%. The enrichment factors of the analytes ranged from 364 to 391, indicating that the obtained functionalized Fe₃O₄ nanoparticles can effectively extract trace target analytes from environmental water samples.     

MEKC determination of IgG in human serum via a pH‐mediated acid stacking method

An on‐column preconcentration technique, pH‐mediated acid stacking, was used in this study to improve the sensitivity of MEKC‐UV analysis of IgG in human serum. Various parameters affecting pH‐mediated acid stacking were optimized systematically. To eliminate the matrix interferences of human serum and to combine the sample pretreatment procedure with the detection methodology, silica‐coated Fe₃O₄ magnetic nanoparticles modified with N‐(2‐aminoethyl)‐3‐aminopropyl‐trimethoxysilane were prepared and employed as solid phase extraction adsorbent to remove the abundant HSA from human serum. HSA was quantitatively removed by silica‐coated Fe₃O₄ magnetic nanoparticles modified with N‐(2‐aminoethyl)‐3‐aminopropyl‐trimethoxysilanes without retaining IgG at pH 9.3. Under the optimum conditions, the sensitivity of IgG was improved 40.3‐fold using a 100 s electrokinetic injection as compared with a 6 s hydrodynamic injection. The detection limit of IgG was found to be 0.1 mg/L, and the proposed method was successfully applied for the determination of IgG in human serum with satisfactory results.     

Extraction of methocarbamol from human plasma with a polypyrrole/multiwalled carbon nanotubes composite decorated with magnetic nanoparticles as an adsorbent followed by electrospray ionization ion mobility spectrometry detection†

In this work, a polypyrrole/multiwalled carbon nanotubes composite decorated with Fe₃O₄ nanoparticles was chemically synthesized and applied as a novel adsorbent for the extraction of methocarbamol from human plasma. Electrospray ionization ion mobility spectrometry was used for the determination of the analyte. The properties of the magnetic‐modified adsorbent were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform IR spectroscopy, and X‐ray diffraction. The effects of experimental parameters on the extraction efficiency of the sorbent were investigated. Under the optimized conditions, the linear dynamic range was found to be 2–150 ng/mL with the detection limit of 0.9 ng/mL. The relative standard deviation was 5.3% for three replicate measurements of methocarbamol in plasma sample. The extraction efficiency of the sorbent for the determination of different drugs with various polarities was also compared to that of Fe₃O₄‐polypyrrole and Fe₃O₄‐multiwalled carbon nanotubes sorbents. Finally, the method was used for the determination of methocarbamol in blood samples.     

Aptamer‐functionalized Fe3O4 magnetic nanoparticles as a solid‐phase extraction adsorbent for the selective extraction of berberine from Cortex phellodendri

The extraction adsorbent was fabricated by immobilizing the highly specific recognition and binding of aptamer onto the surface of Fe₃O₄ magnetic nanoparticles, which not only acted as recognition elements to recognize and capture the target molecule berberine from the extract of Cortex phellodendri , but also could favor the rapid separation and purification of the bound berberine by using an external magnet. The developed solid‐phase extraction method in this work was useful for the selective extraction and determination of berberine in Cortex phellodendri extracts. Various conditions such as the amount of aptamer‐functionalized Fe₃O₄ magnetic nanoparticles, extraction time, temperature, pH value, Mg²⁺ concentration, elution time and solvent were optimized for the solid‐phase extraction of berberine. Under optimal conditions, the purity of berberine extracted from Cortex phellodendri was as high as 98.7% compared with that of 4.85% in the extract, indicating that aptamer‐functionalized Fe₃O₄ magnetic nanoparticles‐based solid‐phase extraction method was very effective for berberine enrichment and separation from a complex herb extract. The applicability and reliability of the developed solid‐phase extraction method were demonstrated by separating berberine from nine different concentrations of one Cortex phellodendri extract. The relative recoveries of the spiked solutions of all the samples were between 95.4 and 111.3%, with relative standard deviations ranging between 0.57 and 1.85%.     

Validation of an SPME method,using PDMS,PA, PDMS-DVB,and CW-DVB SPME fiber coatings,for analysis of organophosphorus insecticides in natural waters

Solid-phase microextraction (SPME) has been optimized and applied to the determination of the organophosphorus insecticides diazinon, dichlofenthion, parathion methyl, malathion, fenitrothion, fenthion, parathion ethyl, bromophos methyl, bromophos ethyl, and ethion in natural waters. Four types of SPME fiber coated with different stationary phases (PDMS, PA, PDMS-DVB, and CW-DVB) were used to examine their extraction efficiencies for the compounds tested. Conditions that might affect the SPME procedure, such as extraction time and salt content, were investigated to determine the analytical performance of these fiber coatings for organophosphorus insecticides. The optimized procedure was applied to natural waters - tap, sea, river, and lake water - spiked in the concentration range 0.5 to 50 micro g L(-1) to obtain the analytical characteristics. Recoveries were relatively high - >80% for all types of aqueous sample matrix - and the calibration plots were reproducible and linear (R(2)>0.982) for all analytes with all the fibers tested. The limits of detection ranged from 2 to 90 ng L(-1), depending on the detector and the compound investigated, with relative standard deviations in the range 3-15% at all the concentration levels tested. The SPME partition coefficients (K(f)) of the organophosphorus insecticides were calculated experimentally for all the polymer coatings. The effect of organic matter such as humic acids on extraction efficiency was also studied. The analytical performance of the SPME procedure using all the fibers in the tested natural waters proved effective for the compounds.