Solid‐phase extraction based on chloromethylated polystyrene magnetic nanospheres followed by gas chromatography with mass spectrometry to determine phthalate esters in beverages

An ultrasound‐assisted magnetic solid‐phase extraction procedure with chloromethylated polystyrene‐coated Fe₃O₄ nanospheres as magnetic adsorbents has been developed to determine eight phthalate esters (bis(4‐methyl‐2‐pentyl) phthalate, dipentyl phthalate, dihexyl phthalate, benzyl butyl phthalate, bis(2‐butoxyethyl) phthalate, dicyclohexyl phthalate, di‐n‐octyl phthalate, and dinonyl phthalate) simultaneously in beverage samples, in combination with gas chromatography coupled to tandem mass spectrometry for the first time. Several factors related to magnetic solid‐phase extraction efficiencies, such as amount of adsorbent, extracting time, ionic strength, and desorption conditions were investigated. The enrichment factors of the method for the eight analytes were over 2482. A good linearity was observed in the range of 10–500 ng/L for bis(2‐butoxyethyl) phthalate and 2–500 ng/L for the other phthalate esters with correlation coefficients ranging from 0.9980 to 0.9998. The limits of detection and quantification for the eight phthalate esters were in the range of 0.20–2.90 and 0.67–9.67 ng/L, respectively. The mean recoveries at three spiked levels were 75.8–117.7%, the coefficients of variations were <11.6%. The proposed method was demonstrated to be a simple and efficient technique for the trace analysis of the phthalate esters in beverage samples.     

Preparation of alumina-coated magnetite nanoparticle for extraction of trimethoprim from environmental water samples based on mixed hemimicelles solid-phase extraction

In this study, a new type of alumina-coated magnetite nanoparticles (Fe₃O₄/Al₂O₃ NPs) modified by the surfactant sodium dodecyl sulfate (SDS) has been successfully synthesized and applied for extraction of trimethoprim (TMP) from environmental water samples based on mixed hemimicelles solid-phase extraction (MHSPE). The coating of alumina on Fe₃O₄ NPs not only avoids the dissolving of Fe₃O₄ NPs in acidic solution, but also extends their application without sacrificing their unique magnetization characteristics. Due to the high surface area of these new sorbents and the excellent adsorption capacity after surface modification by SDS, satisfactory concentration factor and extraction recoveries can be produced with only 0.1 g Fe₃O₄/Al₂O₃ NPs. Main factors affecting the adsolubilization of TMP such as the amount of SDS, pH value, standing time, desorption solvent and maximal extraction volume were optimized. Under the selected conditions, TMP could be quantitatively extracted. The recoveries of TMP by analyzing the four spiked water samples were between 67 and 86%, and the relative standard deviation (RSD) ranged from 2 to 6%. Detection and quantification limits of the proposed method were 0.09 and 0.24 μg L⁻¹, respectively. Concentration factor of 1000 was achieved using this method to extract 500 mL of different environmental water samples. Compared with conventional SPE methods, the advantages of this new Fe₃O₄/Al₂O₃ NPs MHSPE method still include easy preparation and regeneration of sorbents, short times of sample pretreatment, high extraction yields, and high breakthrough volumes. It shows great analytical potential in preconcentration of organic compounds from large volume water samples.     

A porous carbon derived from amino‐functionalized material of Institut Lavoisier as a solid‐phase microextraction fiber coating for the extraction of phthalate esters from tea

In this work, a porous carbon derived from amino‐functionalized material of Institut Lavoisier (C‐NH₂‐MIL‐125) was prepared and coated onto a stainless‐steel wire through sol–gel technique. The coated fiber was used for the solid‐phase microextraction of trace levels of phthalate esters (diallyl phthalate, di‐iso‐butyl ortho‐phthalate, di‐n‐butyl ortho‐phthalate, benzyl‐n‐butyl ortho‐phthalate, and bis(2‐ethylhexy) ortho‐phthalate) from tea beverage samples before gas chromatography with mass spectrometric analysis. Several experimental parameters that could influence the extraction efficiency such as extraction time, extraction temperature, sample pH, sample salinity, stirring rate, desorption temperature and desorption time, were investigated. Under the optimal conditions, the linearity existed in the range of 0.05–30.00 μg/L for green jasmine tea beverage samples, and 0.10–30.00 μg/L for honey jasmine tea beverage samples, with the correlation coefficients (r) ranging from 0.9939 to 0.9981. The limits of detection of the analytes for the method were 2.0–3.0 ng/L for green jasmine tea beverage sample, and 4.0–5.0 ng/L for honey jasmine tea beverage sample, depending on the compounds. The recoveries of the analytes for the spiked samples were in the range of 82.0–106.0%, and the precision, expressed as the relative standard deviations, was less than 11.1%.     

Cost‐efficient magnetic nanoporous carbon derived from citrus peel for the selective adsorption of seven insecticides

A magnetic solid‐phase extraction adsorbent that consisted of citrus peel‐derived nanoporous carbon and silica‐coated Fe₃O₄ microspheres (C/SiO₂@Fe₃O₄) was successfully fabricated by co‐precipitation. As a modifier for magnetic microspheres, citrus peel‐derived nanoporous carbon was not only economical and renewable for its raw material, but exerted enormous nanosized pore structure, which could directly influence the type of adsorbed analytes. The C/SiO₂@Fe₃O₄ also possessed the advantages of Fe₃O₄ microspheres like superparamagnetism, which could be easily separated magnetically after adsorption. Integrating the superior of biomass‐derived nanoporous carbon and Fe₃O₄ microspheres, the as‐prepared C/SiO₂@Fe₃O₄ showed high extraction efficiency for target analytes. The obtained material was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and the Brunauer–Emmett–Teller method, which demonstrated that C/SiO₂@Fe₃O₄ was successfully synthesized. Under the optimal conditions, the adsorbent was selected for the selective adsorption of seven insecticides before gas chromatography with mass spectrometry detection, and good linearity was obtained in the concentration range of 2–200 μg/kg with the correlation coefficient ranging from 0.9952 to 0.9997. The limits of detection were in the range of 0.03–0.39 μg/kg. The proposed method has been successfully applied to the enrichment and detection of seven insecticides in real vegetable samples.     

Simultaneous determination of seven phthalic acid esters in beverages using ultrasound and vortex‐assisted dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography

A sensitive, rapid, and simple high‐performance liquid chromatography with UV detection method was developed for the simultaneous determination of seven phthalic acid esters (dimethyl phthalate, dipropyl phthalate, di‐n‐butyl phthalate, benzyl butyl phthalate, dicyclohexyl phthalate, di‐(2‐ethylhexyl) phthalate, and di‐n‐octyl phthalate) in several kinds of beverage samples. Ultrasound and vortex‐assisted dispersive liquid–liquid microextraction method was used. The separation was performed using an Intersil ODS‐3 column (C₁₈, 250 × 4.6 mm, 5.0 μm) and a gradient elution with a mobile phase consisting of MeOH/ACN (50:50) and 0.2 M KH₂PO₄ buffer. Analytes were detected by a UV detector at 230 nm. The developed method was validated in terms of linearity, limit of detection, limit of quantification, repeatability, accuracy, and recovery. Calibration equations and correlation coefficients (> 0.99) were calculated by least squares method with weighting factor. The limit of detection and quantification were in the range of 0.019–0.208 and 0.072–0.483 μg/L. The repeatability and intermediate precision were determined in terms of relative standard deviation to be within 0.03–3.93 and 0.02–4.74%, respectively. The accuracy was found to be in the range of –14.55 to 15.57% in terms of relative error. Seventeen different beverage samples in plastic bottles were successfully analyzed, and ten of them were found to be contaminated by different phthalic acid esters.     

Synthetic and mechanistic aspects of preparation of phosphinito‐ and phosphito‐mercuries

A >P O⁻ ( 1 ) type of anion has been used as an efficient synthetic precursor of four‐coordinated compounds: R₂P(O) Hg (O)PR₂ ( 5 ) and R₂P(O) Hg Bz ( 3 ) (R = alkoxy, alkyl, aryl). They were obtained in good yield. Bis(t‐butyl‐phenylphosphinito‐P)mercury (meso and rac) ( 5c,d ) selectively decomposed into 1,2‐di‐t‐butyl‐1,2‐diphenyldiphosphane 1,2‐dioxide (meso and rac) ( 6c,d) . Furthermore, some mechanistic aspects of the synthesis of mentioned compounds are elaborated.© 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:234–237, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20409     

Simultaneous determination of 17 phthalate esters in edible vegetable oils by GC‐MS with silica/PSA‐mixed solid‐phase extraction

A quantified method for the determination of 17 phthalate esters (PAEs) in edible vegetable oil by GC‐MS with the pretreatment of acetonitrile extraction and silica/N‐(n‐Propyl)ethylenediamine‐mixed SPE column was established. By the quantification of internal standard of D₄‐di(2‐ethylhexyl) phthalate, a good linearity range of related 17 PAEs was observed. The correlation coefficient was ranged at 0.994～1.000, and the standard lowest quantified level was 0.05～0.15 mg/L. The spiking recoveries of 17 PAEs were 78.3～108.9% with the relative standard deviations of 4.3～12.1% (n = 6). The method detection limits were 0.1～0.2 mg/kg. Meanwhile, PAEs were determined in 30 plastic buckets of edible vegetable oil from supermarkets in Hangzhou city of China. The survey of 30 oil samples showed di(2‐ethylhexyl) phthalate (DEHP) had the 100% (30/30) detection rate. The levels of diisobutyl phthalate with 86.7% (26:30), di‐n‐butyl phthalate (DBP) with 70% (21:30) and diethyl phthalate with 10% (3:30) were detected. It was worth note that DBP with 16.7% (5:30) samples and DEHP with 10% (3:30) samples were beyond the regular migrating limit, which indicated that more attention should be paid to the PAEs in oil with plastic package.     

Next‐Generation Polymer Shells for Inorganic Nanoparticles are Highly Compact,Ultra‐Dense,and Long‐Lasting Cyclic Brushes

Cyclic poly‐2‐ethyl‐2‐oxazoline (PEOXA) ligands for superparamagnetic Fe₃O₄ nanoparticles (NPs) generate ultra‐dense and highly compact shells, providing enhanced colloidal stability and bio‐inertness in physiological media. When linear brush shells fail in providing colloidal stabilization to NPs, the cyclic ones assure long lasting dispersions. While the thermally induced dehydration of linear PEOXA shells cause irreversible aggregation of the NPs, the collapse and subsequent rehydration of similarly grafted cyclic brushes allow the full recovery of individually dispersed NPs. Although linear ligands are densely grafted onto Fe₃O₄ cores, a small plasma protein such as bovine serum albumin (BSA) still physisorbs within their shells. In contrast, the impenetrable entropic shield provided by cyclic brushes efficiently prevents nonspecific interaction with proteins.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

Next‐Generation Polymer Shells for Inorganic Nanoparticles are Highly Compact,Ultra‐Dense,and Long‐Lasting Cyclic Brushes

Cyclic poly‐2‐ethyl‐2‐oxazoline (PEOXA) ligands for superparamagnetic Fe₃O₄ nanoparticles (NPs) generate ultra‐dense and highly compact shells, providing enhanced colloidal stability and bio‐inertness in physiological media. When linear brush shells fail in providing colloidal stabilization to NPs, the cyclic ones assure long lasting dispersions. While the thermally induced dehydration of linear PEOXA shells cause irreversible aggregation of the NPs, the collapse and subsequent rehydration of similarly grafted cyclic brushes allow the full recovery of individually dispersed NPs. Although linear ligands are densely grafted onto Fe₃O₄ cores, a small plasma protein such as bovine serum albumin (BSA) still physisorbs within their shells. In contrast, the impenetrable entropic shield provided by cyclic brushes efficiently prevents nonspecific interaction with proteins.     

F33O4 Magnetic Nanoparticles for Cinnamic Acid Extraction from Ramulus Cinnamomi

A facile solid‐phase extraction (SPE) method based on bare Fe₃O₄ magnetic nanoparticles (Fe₃O₄ NPs) was developed to capture cinnamic acid (CA) from a well‐known traditional Chinese medicine, Ramulus cinnamomi, for high performance liquid chromatography (HPLC) analysis. The as‐prepared Fe₃O₄ NPs were characterized via Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). Several parameters that influence CA extraction rate, such as the amount of Fe₃O₄ NPs, shaking time, methanol content, eluent pH, and elution time, were investigated. The experimental results show that the CA extraction was 86.9 % at optimal condition, and the mass yield of CA extraction was found to be 0.00021 %. This study demonstrates that the developed CA extraction method is simple, cheap and environmentally friendly. Therefore, the proposed method has a potential for CA separation and purification from complex biological samples.     

Double‐Layered Plasmonic–Magnetic Vesicles by Self‐Assembly of Janus Amphiphilic Gold–Iron(II,III) Oxide Nanoparticles

Janus nanoparticles (JNPs) offer unique features, including the precisely controlled distribution of compositions, surface charges, dipole moments, modular and combined functionalities, which enable excellent applications that are unavailable to their symmetrical counterparts. Assemblies of NPs exhibit coupled optical, electronic and magnetic properties that are different from single NPs. Herein, we report a new class of double‐layered plasmonic–magnetic vesicle assembled from Janus amphiphilic Au‐Fe₃O₄ NPs grafted with polymer brushes of different hydrophilicity on Au and Fe₃O₄ surfaces separately. Like liposomes, the vesicle shell is composed of two layers of Au‐Fe₃O₄ NPs in opposite direction, and the orientation of Au or Fe₃O₄ in the shell can be well controlled by exploiting the amphiphilic property of the two types of polymers.     

Superparamagnetic Fe3O4@SiO2 core–shell composite nanoparticles for the mixed hemimicelle solid‐phase extraction of benzodiazepines from hair and wastewater samples before high‐performance liquid chromatography analysis

Magnetic Fe₃O₄/SiO₂ composite core–shell nanoparticles were synthesized, characterized, and applied for the surfactant‐assisted solid‐phase extraction of five benzodiazepines diazepam, oxazepam, clonazepam, alprazolam, and midazolam, from human hair and wastewater samples before high‐performance liquid chromatography with diode array detection. The nanocomposite was synthesized in two steps. First, Fe₃O₄ nanoparticles were prepared by the chemical co‐precipitation method of Fe(III) and Fe(II) as reaction substrates and NH₃/H₂O as precipitant. Second, the surface of Fe₃O₄ nanoparticles was modified with shell silica by Stober method using tetraethylorthosilicate. The Fe₃O₄/SiO₂ composite were characterized by X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. To enhance their adsorptive tendency toward benzodiazepines, cetyltrimethylammonium bromide was added, which was adsorbed on the surface of the Fe₃O₄/SiO₂ nanoparticles and formed mixed hemimicelles. The main parameters affecting the efficiency of the method were thoroughly investigated. Under optimum conditions, the calibration curves were linear in the range of 0.10–15 μgmL^?1. The relative standard deviations ranged from 2.73 to 7.07%. The correlation coefficients varied from 0.9930 to 0.9996.     

Novel synthesis of Fe2O3–Pt ellipsoids coated by double‐shelled La2O3 as a catalyst for the reduction of 4‐nitrophenol

A facile strategy is reported for the fabrication of Pt‐loaded core–shell nanocomposite ellipsoids (Fe₂O₃‐Pt@DSL) consisting of ellipsoidal Fe₂O₃ cores, double‐layered La₂O₃ shells and deposited Pt nanoparticles (NPs). The formation of the doubled‐shelled structure uses Fe₂O₃‐Pt@mSiO₂ as template sacrificial agent and it involves the re‐deposition of silica and self‐assembly of metal oxide units. The preparation methods of double‐shelled metal oxides avoid repeated coating and etching and could be utilized to fabricate other shaped double‐shelled composites. Characterization results indicated that the Fe₂O₃‐Pt@DSL nanocomposites possessed mesoporous structure and tunable shell thickness. Moreover, due to the formation of Fe₂O₃ and La₂O₃ composites, Pt NPs can also be stabilized via deposition on chemically active oxides with a synergistic effect. Therefore, as a catalyst for the reduction of 4‐nitrophenol, Fe₂O₃‐Pt@DSL showed superior catalytic activity and reusability due to structural superiority and enhanced composite synergy. Finally, well‐dispersed Pt NPs were encapsulated into the void between the shell layers to construct the Fe₂O₃‐Pt@DSL‐Pt catalyst.     

3‐D graphene‐supported mesoporous SiO2@Fe3O4 composites for the analysis of pesticides in aqueous samples by magnetic solid‐phase extraction with high‐performance liquid chromatography

Three‐dimensional graphene‐supported mesoporous silica@Fe₃O₄ composites (mSiO₂@Fe₃O₄‐G) were prepared by modifying mesoporous SiO₂‐coated Fe₃O₄ onto hydrophobic graphene nanosheets through a simple adsorption co‐condensation method. The obtained composites possess unique properties of large surface area (332.9 m²/g), pore volume (0.68 cm³/g), highly open pore structure with uniform pore size (31.1 nm), as well as good magnetic separation properties. The adsorbent (mSiO₂@Fe₃O₄‐G) was used for the magnetic solid‐phase extraction of seven pesticides with benzene rings in different aqueous samples before high‐performance liquid chromatography. The main parameters affecting the extraction such as adsorbent amount, volume of elution solvent, time of extraction and desorption, salt effect, oscillation rate were investigated. Under the optimal conditions, this method provided low limits of detection (S/N = 3, 0.525–3.30 μg/L) and good linearity (5.0–1000 μg/L, R² > 0.9954). Method validation proved the feasibility of the developed adsorbent, which has a high extraction efficiency and excellent enhancement performance for pesticides in this study. The proposed method was successfully applied to real aqueous samples, and satisfactory recoveries ranging from 77.5 to 113.6% with relative standard deviations within 9.7% were obtained.     

A Yolk–Shell Structured Silicon Anode with Superior Conductivity and High Tap Density for Full Lithium‐Ion Batteries

The poor cycling stability resulting from the large volume expansion caused by lithiation is a critical issue for Si‐based anodes. Herein, we report for the first time of a new yolk–shell structured high tap density composite made of a carbon‐coated rigid SiO₂ outer shell to confine multiple Si NPs (yolks) and carbon nanotubes (CNTs) with embedded Fe₂O₃ nanoparticles (NPs). The high tap density achieved and superior conductivity can be attributed to the efficiently utilised inner void containing multiple Si yolks, Fe₂O₃ NPs, and CNTs Li⁺ storage materials, and the bridged spaces between the inner Si yolks and outer shell through a conductive CNTs “highway”. Half cells can achieve a high area capacity of 3.6 mAh cm^?2 and 95 % reversible capacity retention after 450 cycles. The full cell constructed using a Li‐rich Li₂V₂O₅ cathode can achieve a high reversible capacity of 260 mAh g^?1 after 300 cycles.     

Chemically functionalized silica nanoparticles‐based solid‐phase extraction for effective pre‐concentration of highly toxic metal ions from food and water samples

In this research study, an efficient solid‐phase extraction procedure based on a new organometallic, effective, eco‐friendly and bio‐degradable nanoadsorbent was firstly introduced for influential pre‐concentration of Cu(II), Zn(II), Pb(II), Cd(II) and Mn(II) ions from food and water samples followed by flame atomic absorption spectrophotometric determination. This safe adsorbent consisted of silica nanoparticles chemically functionalized with di‐ethylen tri‐amine (SiO₂@NH₂NPs); easily prepared via an effective and simple approach. Characterization of SiO₂@NH₂NPs was subsequently implemented via SEM, FT‐IR and XRD; certifying high quality of the modified nanoadsorbent in terms of size, shape and surface functional groups. The effects of the main factors on the extraction efficiency were then optimized. Efficient extraction of the analytes of interest at neutral media accompanied with the aid of a bio‐compatible organometallic nanoadsorbent can be considered as valuable advantages of the proposed approach. In the optimum conditions, calibration graphs were linear in the range of 4–700 μg l^?1, with higher correlation coefficients than 0.997 and limits of detection of 1.45–4.10 ng ml^?1. The enrichment factor values were found to be in the span of 120–400. The resultant extraction recovery values were satisfactory; possessing the proper relative standard deviation (%, n  =  5) values of 2.05–4.28%.     

High‐throughput multipesticides residue analysis in earthworms by the improvement of purification method: Development and application of magnetic Fe3O4‐SiO2 nanoparticles based dispersive solid‐phase extraction

As a key representative organism, earthworms can directly illustrate the influence of pesticides on environmental organisms in soil ecosystems. The present work aimed to develop a high‐throughput multipesticides residue analytical method for earthworms using solid–liquid extraction with acetonitrile as the solvent and magnetic material‐based dispersive solid‐phase extraction for purification. Magnetic Fe₃O₄ nanoparticles were modified with a thin silica layer to form Fe₃O₄‐SiO₂ nanoparticles, which were fully characterized by field‐emission scanning electron microscopy, transmission electron microscopy, Fourier‐transform infrared spectroscopy, X‐ray diffractometry, and vibrating sample magnetometry. The Fe₃O₄‐SiO₂ nanoparticles were used as the separation media in dispersive solid‐phase extraction with primary secondary amine and ZrO₂ as the cleanup adsorbents to eliminate matrix interferences. The amounts of nanoparticles and adsorbents were optimized for the simultaneous determination of 44 pesticides and six metabolites in earthworms by liquid chromatography with tandem mass spectrometry. The method performance was systematically validated with satisfactory results. The limits of quantification were 20 μg/kg for all analytes studied, while the recoveries of the target analytes ranged from 65.1 to 127% with relative standard deviation values lower than 15.0%. The developed method was subsequently utilized to explore the bioaccumulation of bitertanol in earthworms exposed to contaminated soil, verifying its feasibility for real sample analysis.     

New application of chitosan‐grafted polyaniline in dispersive solid‐phase extraction for the separation and determination of phthalate esters in milk using high‐performance liquid chromatography

Chitosan‐grafted polyaniline was synthesized and applied as a sorbent for the preconcentration of phthalate esters in dispersive solid‐phase extraction. By coupling dispersive solid‐phase extraction with high‐performance liquid chromatography and response surface methodology (central composite design), a reliable, sensitive, and cost‐effective method for simultaneous determination of phthalate esters including dimethyl phthalate, di‐n‐butyl phthalate, and di(2‐ethylhexyl)phthalate was developed. The morphology of sorbent had been studied by scanning electron microscopy and its chemical structure confirmed by Fourier transform infrared spectroscopy. Under optimum condition, good linearity was observed in the range of 5.0–5000.0 ng/mL. The limits of detection (S/N = 3) and limits of quantification (S/N = 10) were 0.1–0.3 and 0.3–1 ng/mL, respectively. The relative standard deviations were less than 8.8%. Finally, this procedure was employed for extraction of trace amounts of phthalic acid esters in milk samples, the relative recoveries ranged from 82 to 103%.     

Magnetic Resonance and Mössbauer Studies of Superparamagnetic γ‐Fe2O3 Nanoparticles Encapsulated into Liquid‐Crystalline Poly(propylene imine) Dendrimers

We present the first results of electron magnetic resonance (EMR) and Mössbauer spectroscopy studies of γ‐Fe₂O₃ nanoparticles (NPs) incorporated into liquid‐crystalline, second‐generation dendrimers. The mean size of NPs formed in the dendrimers was around 2.5 nm. A temperature‐driven transition from superparamagnetic to ferrimagnetic resonance was observed for the sample. Low‐temperature blocking of the NP magnetic moments has been clearly evidenced in the integrated EMR line intensity and the blocking temperature was about 60 K. The physical parameters of magnetic NPs (magnetic moment, effective magnetic anisotropy) have been determined from analyses of the EMR data. The effective magnetic anisotropy constant is enhanced relative to bulk γ‐Fe₂O₃ and this enhanced value is associated with the influence of the surface and shape effects. The angular dependence of the EMR signal position for the field‐freezing sample from liquid‐crystalline phase showed that NPs possessed uniaxial anisotropy, in contrast to bulk γ‐Fe₂O₃. Mössbauer spectroscopy determined that fabricated NPs consisted of an α‐Fe core and a γ‐Fe₂O₃ shell.