乙醇法合成硼硅Pentasil型分子筛

七十年代,美国Mobil公司^[1]发表了ZSM-5型沸石分子筛的专利,该沸石具有独特的结构和良好的催化性能,在石油化工技术中业已展现出广阔的应用前景.1980年,M.Taramasso^[2]等人用四丙基胺、正硅酸乙酯等原料合成出了四种硼硅分子筛.1981年,作者^[3]在国内首次用有机胶合成出硼硅Pentasil型分子筛(ZSM-5型).本文以水玻璃、白炭黑为硅源,用乙醇取代有机胺,在微量导向剂存在下,合成了硼硅pentasil型分子筛;并用正交实验的方法探讨了合成中诸因素对分子筛结晶度的影响.     

ZAPO-5和MnAPO-5分子筛大单晶的生长

磷酸锌铝(ZAPO-5)和磷酸锰铝(MnAPO-5)分予筛是新型分子筛^[1],由文献^[1]可知UCC得到了粉末状的ZAPO-5和MnAPO-5分子筛,得到的ZAPO-5不仅是粉末状而且是不纯的,本文报道了ZAPO-5和MnAPO-5纯相大单晶的合成。     

Cu-ZSM-5型分子筛的合成与结构表征

近年来，杂原子ZSM-5分子筛合成研究发展极为迅速，许多原子例如B、Ge、Fe等取代铝或佳而进入了分子筛骨架[1-4]．特别是1986年Guth等人间报导在弱酸性体系氟离子存在下合成分子筛，为杂原子沸石分子筛的合成开辟了一条新途径．在碱性体系下，Ione等人[6,7]报导过含铜ZSM-5的合成，但铜是否进入分子筛骨架，尚未给出确切的说明．在微酸性介质中合成Cu－ZSM-5还未见报导．本文在弱酸性介质氟离子存在下，应技合成出氨型Cu-ZSM-5分子筛，并运用XRD、IR、SEM、XPS等方法证明了铜进入了分子筛骨架．1实验1．1试剂白炭．t（SIO。，…     

红外光谱法研究不同硅铝比的ZSM-5及ZSM-11分子筛的骨架振动

红外光谱法研究分子筛的骨架振动得出了在X、Y等沸石分子筛骨架上振动频率与四面体中铝含量的线性关系^[1]。但未见到有关ZSM-5型的报道.本文用红外光谱法系壳探讨了硅铝比和ZSM-5及ZSM-11的骨架振动频率之间的线性关系,并将由IR得到的SiO₂/Al₂O₃比与化学分析值进行了比较。     

杯[4]单硫(硒)杂冠-5的合成及其对金属离子的识别性能研究

从简单无机硫、硒化合物直接合成冠醚环上含硫、硒杂原子的杯[4]单硫杂冠-5及杯[4]单硒杂冠-5;化合物的结构经¹HNMR、MS及元素分析确证.并研究了它们对Na⁺,K⁺,NH⁴⁺,Co²⁺,Ni²⁺,Ag⁺及Hg²⁺的两相萃取性能,发现其对Ag⁺、Hg²⁺有较好的识别能力.     

CF-2沸石的表面酸性及催化性能

CF-2是一种新型的高硅沸石。1981年我们实验室首先在二乙醇胺-甘油-Na₂O-SiO₂-Al₂O₃-H₂O体系中制备成功^[1],以后才见到关于Theta-1^[2],ISI-1^[3],KZ-2^[4],NO-10^[5]和ZSM-22^[6]沸石的报道。     

直接法合成NH4ZSM-5沸石分子筛的研究

七十年代初期美国Mobil公司开发的ZSM-5沸石,近年来在石油化工催化领域得到广泛应用,引起人们日益重视。在合成中除硅源铝源外,还需一定量有机胺,才能晶化得到ZSM-5^[1-2]。李赫咺等^[3]在NaOH体系中不用有机胺类、醇类及其它有机试剂和含氮化合物,直接合成出了NaZSM-5。王清遐、蔡光宇等^[4]在NaOH、NH₃、H₂O混合碱体系中也制得了NaZSM-5。但为了除去产物中对催化反应有害的钠离子,必须进行离子交换除钠,从而制得HZSM-5或NH₄ZSM-5,将后者加热可得HZSM-5,这样使得制备工艺复杂。     

磷酸钴铝(CoAPO-5)分子筛的合成、结构及其性质研究

继文献^[1]的研究之后,我们又合成了CoAPO-5分子筛,Wilson,S.T.^[2]曾提到他们合成的CoAPO-5是不纯的,而我们得到了CoAPO-5的纯相,用X射线衍射、电子探针、红外光谱等方法进行了结构研究.并测定了CoAPO-5分子筛的晶胞参数、化学组成,同时对分子筛的吸附性能、热稳定性、酸性等进行了研究。     

NH4+-TPA+-SiO2-Al2O3-H2O体系中ZSM-5沸石分子筛合成的研究

七十年代初期美国Mobil公司首先研究成功的ZSM-5沸石分子筛,由于它具有独特的孔道结构,对烷基化,异构化,选择裂化和甲醇合成汽油等反应具有独特的催化性能,目前已成为被普遍重视的新型催化剂材料^[1-4]。     

杂原子ZSM－5、ZSM－11和ZSM－48型分子筛的合成

在Na₂O-SiO₂-M_xO_y-H₂O体系中,以HMDA为模板剂用动态法和静态法合成了Ti-ZSM-48型分子筛,首次以85%(wt)HMDA+15%(wt)TPA⁺为模板剂用低温陈化的静态法合成了第四周期过渡金属杂原子M-ZSM-5型分子筛,并与以HMDA、TPA⁺为模板剂合成M-ZSM-5和以TBA⁺为模板剂合成M-ZSM-11进行了对比研究。利用XRD技术跟踪晶体生长过程,考查了模板剂、合成方法、pH值、Na⁺含量等因素对晶化动力学的影响,得出了合成各种杂原子分子筛的最佳条件。各种测试均表明杂原子进入了分子筛骨架。     

双杂原子Ti-Mn-β沸石的合成、表征及催化苯酚羟化反应

采用水热合成法在SiO2-TiO2-MnO2-(TEA)2O-H2O-NH4F体系中合成了Ti-Mn-β沸石。 运用X射线衍射、红外光谱、固体紫外可见漫反射、热重-差热、扫描电子显微镜和X射线光电子能谱等技术手段对样品进行了表征,探讨了影响Ti-Mn-β沸石合成的因素。 Ti-Mn-β沸石在以H2O2为氧化剂的苯酚羟基化反应中表现出较好的催化活性,苯酚的转化率为29.8％,邻苯二酚和对苯二酚的选择性分别为70.9％和26％。     

双杂原子 Fe-V-β 沸石的合成、表征及催化性能

 采用水热合成法在 SiO2-Fe2O3-V2O5-(TEA)2O-H2O-NH4F 体系中合成了 Fe-V-β 沸石, 并用 X 射线衍射、红外光谱、固体漫反射光谱、热重-差热分析、扫描电镜-能量色散谱仪和等离子体发射光谱等技术对沸石样品进行了表征, 探讨了影响 Fe-V-β 沸石合成的因素. 结果表明, 按摩尔比组成SiO2:Fe2O3:V2O5:(TEA)2O:H2O:NH4F = 60:(0.1~0.75):(0.1~0.75):(17~18):(550~ 650):(30~50) 配制初始反应混合物, 可以制备出结晶良好的 Fe-V-β 沸石, 且 Fe 和 V 原子进入到沸石骨架. 所得 Fe-V-β (Si/(Fe+V) = 30) 沸石在 H2O2 氧化苯乙烯反应中表现出最高的催化活性, 苯乙烯转化率为 25.4%, 苯甲醛、苯乙醛和苯乙酮的选择性分别为 69.1%, 22.5% 和 4.1%.     

Triphenylamine-functionalized magnetic microparticles as a new adsorbent coupled with high performance liquid chromatography for the analysis of trace polycyclic aromatic hydrocarbons in aqueous samples

Triphenylamine (TPA)-functionalized magnetic microspheres (Fe(3)O(4)/SiO(2)/TPA) were prepared and applied as solid phase extraction (SPE) adsorbents for the analysis of polycyclic aromatic hydrocarbons (PAHs) in environmental samples in combination with high-performance liquid chromatography (HPLC). The magnetic solid-phase extraction (MSPE) conditions affecting the extraction efficiency were optimized, including elution solvent, standing time, amount of sorbent, and salt concentration. Due to the strong π-π conjugate effect between the benzene rings of TPA and PAHs, high extraction efficiency was achieved with spiked recoveries of 80.21-108.33% and relative standard deviations (RSD) of less than 10%. Good linearities (R(2) > 0.997) for all calibration curves were obtained with low limits of detection (LOD) of 0.25, 0.5, 0.5, 3.75, 0.2 and 0.04 ng L(-1) for anthracene, fluoranthene, pyrene, chrysene, benzo[b]fluoranthene and benzo[k]fluoranthene, respectively. The achieved results indicate the applicability of Fe(3)O(4)/SiO(2)/TPA as MSPE adsorbents.     

Computational modeling of di-transition-metal-substituted gamma-keggin polyoxometalate anions. Structural refinement of the protonated divacant lacunary silicodecatungstate

The B3LYP density functional method has been validated for the di-Mn-substituted gamma-Keggin polyoxometalate (POM) anion, [(SiO4)MnIII2(OH)2W10O32]4-, and for the divacant lacunary silicodecatungastate, gamma-[(SiO4)W10O32]8-. This approach was shown to adequately describe the geometries of [(SiO4)MnIII2(OH)2W10O32]4- and gamma-[(SiO4)W10O32]8. Three different geometrical models, "full", "medium", and "small", for Mn2-gamma-Keggin have also been validated. It was shown that the medium [(SiO4)MnIII2(OH)2W6O24H8]4- model, as well as small [(SiO4)MnIII2(OH)2W4O18H10]2- model, preserves structural features of the full system, [(SiO4)MnIII2(OH)2W10O32]4-. However, the small model distorts the charge distribution at the "active site" of the system and should be used with caution. The same computational approach was employed to elucidate the structure of the di-Fe-substituted gamma-Keggin POM. The structure of the acidic (tetra-protonated form) of lacunary POM, gamma-[(SiO4)W10O32H4]4-, was shown to be gamma-[(SiO4)W10O28(OH)4]4- with four terminal hydroxo ligands, rather than gamma-[(SiO4)W10O30(H2O)2]4- with two aqua and two oxo(terminal) ligands as reported by Mizuno and co-workers (Science 2003, 300, 964). The observed and calculated asymmetry in the W-O(terminal) bond distances of gamma-[(SiO4)W10O32H4]4- is explained in terms of the existence of O1H1...O2H2 and O4H4...O3H3 hydrogen-bonding patterns in the gamma-[(SiO4)W10O28(OH)4]4- structure.     

高质量AlPO4 -5分子筛大单晶的合成与表征

The AlPO4-5 molecular sieve has been synthesized hydrothermally by using tripropylamine (TPA) as the template, and pseudoboehmite and orthophosphoric acid as aluminum and phosphorus sources, respectively. The single crystals of AlPO4-5 with different sizes have been obtained by varying the molar ratio of reactants and the crystallization conditions (such as the temperature and time). The typical molar ratio of the reactive mixture is Al2O3∶P2O5∶TPA∶C2H5OH∶H2O∶HF=1∶1.2∶2.66∶80∶1000∶0.7, and perfect AlPO4-5 large single crystals with the maximum length up to 2.0 and 0.31 mm transverse dimension have been prepared by crystallizing the mixture at 457 K for 48 h. Scanning Electron Microscopy (SEM) has been employed to observe the sizes and morphologies of the large single crystals of AlPO4-5. The structure of AlPO4-5 single crystal has been refined by the SMART 1000 single crystal diffractometer.     

低硅铝比ZSM-5分子筛上C4烃的催化裂解反应

以低硅铝比(n(SiO2)/n(Al2O3)=20-45)的ZSM-5分子筛为催化剂, 研究了混合C4烃的催化裂解反应, 并对不同硅铝比的ZSM-5分子筛进行了酸性表征. 混合C4烃的催化裂解反应结果表明, 低硅铝比的ZSM-5分子筛具有较高的低温催化活性, 高硅铝比ZSM-5分子筛催化剂上乙烯和丙烯的收率高于低硅铝比ZSM-5分子筛催化剂, 低硅铝比ZSM-5分子筛上苯和甲苯的收率高于高硅铝比ZSM-5分子筛催化剂. 在反应温度为625 ℃时, 硅铝比为20的ZSM-5分子筛催化剂上乙烯、丙烯、苯和甲苯的总收率可达79.42%. 酸性表征结果表明, 硅铝比低的ZSM-5分子筛具有更多的Bronsted(B)酸酸量、Lewis(L)酸酸量及总酸酸量, 这是低硅铝比ZSM-5分子筛具有低温高活性及高的苯和甲苯收率的原因.     

预处理方法对钛硅沸石催化性能的影响

 采用不同的介质（HCl－H2O2,NH4F－H2O2,HNO3－H2O2,H2SO4－H2O2）对钛硅沸石TS－1进行预处理,并用IR,XRD,UV－Vis,XRF和27AlMASNMR对样品进行了表征;以丙烯环氧化为探针反应,考察了样品的催化性能．结果表明,经预处理后,TS－1中的TiO2均被脱除约20％,而Al几乎未被脱除;所脱除的TiO2为非骨架钛;环氧丙烷的选择性降低,但H2O2的有效利用率明显升高．特别是采用NH4F－H2O2预处理时,H2O2的转化率和有效利用率均提高10％．     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

Vapor-phase synthesis of mesoporous SiO2-P2O5 thin films

Mesoporous SiO2-P2O5 films were synthesized from the vapor phase onto a silicon substrate. First, a precursor solution of cetyltrimethylammonium bromide (C16TAB), H3PO4, ethanol, and water was deposited on a silicon substrate by a spin-coating method. Then, the C16TAB-H3PO4 composite film was treated with tetraethoxysilane (TEOS) vapor at 90-180 degrees C for 2.5 h. The H3PO4-C16TAB composite formed a hexagonal structure on the silicon substrate before vapor treatment. The TEOS molecules penetrated into the film without a phase transition. The periodic mesostructure of the SiO2-P2O5 films was retained after calcination. The calcined films showed a high proton conductivity of about 0.55 S/cm at room temperature. The molar ratio of P/Si in the SiO2-P2O5 film was as high as 0.43, a level that was not attained by a premixing sol-gel method. The high phosphate group content and the ordered periodic mesostructure contributed to the high proton conductivity.     

A Raman and infrared spectroscopic study of the uranyl silicates--weeksite, soddyite and haiweeite: part 2

Raman spectroscopy has been used to study the molecular structure of a series of selected uranyl silicate minerals including weeksite K2[(UO2)2(Si5O13)].H2O, soddyite [(UO2)2SiO4.2H2O] and haiweeite Ca[(UO2)2(Si5O12(OH)2](H2O)3 with UO2(2+)/SiO2 molar ratio 2:1 or 2:5. Raman spectra clearly show well resolved bands in the 750-800 cm(-1) region and in the 950-1000 cm(-1) region assigned to the nu1 modes of the (UO2)2+ units and to the (SiO4)4- tetrahedra. Soddyite is characterized by Raman bands at 828.0, 808.6 and 801.8 cm(-1), 909.6 and 898.0 cm(-1), and 268.2, 257.8 and 246.9 cm(-1), attributed to the nu1, nu3, and nu2 (delta) (UO2)2+, respectively. Coincidences of the nu1 (UO2)2+ and the nu1 (SiO4)4- is expected. Bands at 1082.2, 1071.2, 1036.3, 995.1 and 966.3 cm(-1) are attributed to the nu3 (SiO4)4-. Sets of Raman bands in the 200-300 cm(-1) region are assigned to nu2 (delta) (UO2)2+ and UO ligand vibrations. Multiple bands indicate the non-equivalence of the UO bonds and the lifting of the degeneracy of nu2 (delta) (UO2)2+ vibrations. The (SiO4)4- tetrahedral are characterized by bands in the 470-550 cm(-1) and in the 390-420 cm(-1) region. These bands are attributed to the nu4 and nu2 (SiO4)4- bending modes. The minerals show characteristic OH stretching bands in the 2900-3500 and 3600-3700 cm(-1).