Effect of calcination temperature on the microstructure of porous TiO<Subscript>2</Subscript> film

To obtain porous TiO₂ film, the precursor sol was prepared by hydrolysis of Ti isopropoxide and then complexed with trehalose dihydrate. The porous TiO₂ film was fabricated by the dip-coating technique on glass substrates using this solution. The TiO₂ film was calcined at 500 °C. The maximum thickness of the film from one-run dip-coating was ca. 740 nm. The film was composed of nanosized particle and pores. The porosity of the TiO₂ film was increased by addition of trehalose dihydrate to the sol. The porous TiO₂ films were calcined at different temperatures. The effects of calcination temperature on the microstructure of the porous TiO₂ film were investigated. The porous film prepared from sol containing trehalose still kept the porous structure after calcination at 950 °C. The phase transition temperature of the film from anatase to rutile was shifted from 650 to 700 °C by addition of trehalose to the sol.     

Preparation of TiO2 nanocrystalline films controlled by acetylacetone/polyethylene glycol and their photoelectric properties

TiO₂ nanocrystalline films were prepared from titanium tetra-n-butoxide modified with double hydrolysis inhibitors, acetylacetone and polyethylene glycol (PEG), in mixture of methanol and ethanol. The correlation among surface structure of the TiO₂ films, preparation conditions, and photovoltaic properties of the solar cells using the TiO₂ films was investigated. The particle size of the obtained TiO₂ films was decreased as the PEG content increased. The nanostructured films with the narrow distribution of particle size could be prepared. The amounts of adsorbed dyes for these TiO₂ films were larger than that without PEG. The performance of the solar cell fabricated using the TiO₂ film improved as the amount of the PEG increased, and the solar cell using the TiO₂ film prepared from the solution with 30 wt% PEG exhibited the highest performance.     

The influence of film thickness and process temperature on <Emphasis Type="Italic">c</Emphasis>-axis orientation of Bi<Subscript>3</Subscript>TiTaO<Subscript>9</Subscript> thin films

Bi-layered ferroelectric Bi₃TiTaO₉ (BTT) thin films with different thickness (ranging from 100 to 400 nm) were successfully fabricated on Pt(111)/TiO₂/SiO₂/(100)Si substrates using chemical solution deposition (CSD) technique at different annealing temperatures. The c-axis orientation of the films was affected by film thickness and process temperature. The thinner the film and the higher the process temperature, the higher the c-axis orientation. With the increase of film thickness, the stress decreased but the film roughness increased, which led to the decrease of c-axis orientation of films. BTT films annealed at 800°C were found to have much improved remament polarization (P _r ) than that of films annealed at 650 and 750°C. The P _r and coercive field (E _c ) values were measured to be 2 μC/cm² and 100 kV/cm, respectively. BTT films showed well-defined ferroelectric properties with grain size larger than 100 nm.     

Preparation of nanocrystalline porous titania films on titanium substrates by a sol–gel method with polyethylene glycol as a template

Porous nanocrystalline TiO₂ films have been prepared on cp-Ti substrates for biomedical usage by a sol–gel process from the solutions containing polyethylene glycol (PEG) as a template. Variations of the crystal structure with heat-treatment temperature determined by XRD are different for TiO₂ films and powders, due to the effect of titanium substrate. The surface texture of porous TiO₂ films is analyzed by means of SEM and found to greatly depend on the concentration and molecular weight of PEG. The pore formation mechanism is discussed in relation to the self-assembly of PEG and phase separation between PEG adsorbed on TiO₂ oligomers and ethanol.     

Dielectric properties and I-V characteristics of (Pb<Subscript>0.4</Subscript>Sr<Subscript>0.6</Subscript>)TiO<Subscript>3</Subscript> thin films improved by TiO<Subscript>2</Subscript> buffer layers

A TiO₂ thin buffer layer was introduced between the (Pb_0.4Sr_0.6)TiO₃ (PST) film and the Pt/Ti/SiO₂/Si substrate in an attempt to improve their electrical properties. Both TiO₂ and PST layers were prepared by a chemical solution deposition method. It was found that the TiO₂ buffer layer increased the (100)/(001) preferred orientation of PST and decreased the surface roughness of the films, leading to an enhancement in electrical properties including an increase in dielectric constant and in its tunability by DC voltage, as well as a decrease in dielectric loss and leakage current density. At an optimized thickness of the TiO₂ buffer layer deposited using 0.02 mol/l TiO₂ sol, the 330-nm-thick PST films had a dielectric constant, loss and tunability of 1126, 0.044 and 60.7% at 10 kHz, respectively, while the leakage current density was 1.95 × 10⁻⁶ A/cm² at 100 kV/cm.     

Effect of PEG with different <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> as template direction reagent on preparation of porous TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> with assistance of supercritical CO<Subscript>2</Subscript>

Titania–silica composite have been prepared using polyethylene glycol (PEG) with different molecular weights (M _w), PEG20000, PEG10000, and PEG2000, as template in supercritical carbon dioxide (SC CO₂). The composite precursors were dissolved in SC CO₂ and impregnated into PEG templates using SC CO₂ as swelling agent and carrier. After removing the template by calcination at suitable temperature, the titania–silica composite were obtained. The composite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and nitrogen sorption–desorption experiment. Photocatalytic activity of the samples has been investigated by photodegradation of methyl orange. Results indicate that there are many Si–O–Ti linkages in the TiO₂/SiO₂ composite; the PEG template has a significant influence on the structure of TiO₂/SiO₂. In addition, the TiO₂/SiO₂ prepared with PEG10000 exhibited high photocatalytic efficiency. So this work supplies a clue to control and obtain the TiO₂/SiO₂ composite with different photocatalytic reactivity with the aid of suitable PEG template in supercritical CO₂.     

Preparation and photoelectrochemical performance of TiO<Subscript>2</Subscript>/Ag<Subscript>2</Subscript>Se interface composite film

Coupling TiO₂ with a narrow band gap semiconductor acting as the photosensitizer has attracted much attention in solar energy exploitation. In this work, the porous TiO₂ film was first formed on the conducting glass plate (CGP) substrate by the decomposition of polyethylene glycol (PEG) mixing in titanium hydroxide sol at 450°C. Then, the TiO₂/Ag²Se interface composite film was fabricated by interface reaction of AgNO₃ with NaSeSO₃ on the activated surface of porous TiO₂ film. The results of SEM and XRD analyses indicated that the porous TiO₂ layer was made up of the anatase crystal, and the Ag₂Se layer was made up of congregative small particles that have low-temperature α-phase structure. Due to its efficient charge separation for the photo-induced electron-hole pairs, the TiO₂/Ag₂Se interface composite film as-prepared has good photovoltaic property and high photocurrent response for visible light, which have been confirmed by the photoelectrochemical measurements.     

Structure and photochromic properties of molybdenumphosphoric acid/TiO<Subscript>2</Subscript> composite films

TiO₂ sol-gel composite films with dropping molybdenumphosphoric acid (PMoA) have been prepared by sol-gel method. The structure and constitute of composite thin films were studied with Fourier transforms infrared spectroscopy (FT-IR) atomic force microscopy (AFM), and X-ray diffraction (XRD) patterns, respectively. The photochromic behavior and mechanism of composite thin films were investigated with ultraviolet-visible spectra (UV-vis) and electron spin resonance (ESR). FT-IR results showed that the Keggin geometry of PMoA was still preserved inside PMoA/TiO₂ composite thin films, and a charge transfer bridge was built at the interface of PMoA and TiO₂ through the Mo-O-Ti bond. Surface topography of the composite film showed obvious changes before/after adding PMoA, and the surface topography of composite films showed obvious changes before/after irradiating as well. Composite thin film had reversible photochromic properties. Irradiated with UV light, transparent films changed from colorless to blue and they can bleach completely with ambient air in the dark. ESR results showed that TiO₂ were excitated by UV light to produce electrons, which deoxidized PMoA to produce heteropolyblues. The photochromic process of PMoA/TiO₂ system was carried through electron transfer mechanism.     

Formation of Anatase Nanocrystals in Sol-Gel Derived TiO2-SiO2 Thin Films with Hot Water Treatment

We have successfully prepared transparent and porous anatase nanocrystals-dispersed films by treating the sol-gel derived TiO₂-SiO₂ films containing poly(ethylene glycol), PEG, with hot water. This process was done at temperatures lower than 100°C under atmospheric pressure, and thus anatase nanocrystals-dispersed films can be formed on various kinds of substrates including organic polymers with poor heat resistance. The changes in structure and composition of the TiO₂-SiO₂ gel films with hot water treatment were related to the formation process of anatase nanocrystals in the TiO₂-SiO₂ gel films with hot water treatment. The formation of anatase nanocrystals was found to proceed to hydrolysis of Si–O–Ti bonds and dissolution of SiO₂ component. In addition, porous film structure formed by leaching of PEG with hot water treatment led to homogenous dispersion of anatase nonocrystals in the films.     

Photo-Induced Hydrophilicity of TiO<Subscript>2</Subscript> Films Deposited on Stainless Steel via Sol-Gel Technique

The photo-induced hydrophilicity of TiO₂ films deposited on stainless steel substrates and silicon wafers using two different sol-gel routes has been investigated. The results indicate that crystalline titanium oxide films with excellent hydrophilic properties can be obtained on silicon wafer with both routes. XPS and XRD data reveal that films deposited on stainless steel exhibit crystallization features similar to those of films deposited on silicon wafers, and only differ by their oxidation degree owing to a TiO₂ reduction process associated to a diffusion of iron ions during deposition of the acidic sol and/or high temperature post-treatment. Consequently, hydrophilic properties of films deposited on stainless steel are inhibited. The deposition of a SiO_x barrier layer at the film/substrate interface allows preventing such a detrimental substrate influence. A low temperature deposition route of the TiO₂ film associated to the presence of a barrier layer yields best results in preventing iron contamination of the films.     

Dielectric and tunable properties of highly (110)-oriented (Ba<Subscript>0.65</Subscript>Sr<Subscript>0.35</Subscript>)TiO<Subscript>3</Subscript> thin films deposited on Pt/LaNiO<Subscript>3</Subscript>/SiO<Subscript>2</Subscript>/Si substrates

Highly (110)-oriented Ba_0.65Sr_0.35TiO₃ films were deposited on Pt/LaNiO₃/SiO₂/Si substrates by a sol–gel method. It was found that the (110)-preferred Pt film was very effective for growing (110)-oriented ferroelectric films with perovskite structure. The as-grown Ba_0.65Sr_0.35TiO₃ films showed good dielectric properties with dielectric constant and loss tangent tan δ = 0.026. Excellent dielectric tunability was also achieved in the (110)-oriented films. With applying an electric field of 230 kV/cm at 100 kHz, the dielectric tunability and the figure of merit can reach up to 63.4% and 16, respectively. These results indicate that the highly (110)-oriented Ba_0.65Sr_0.35TiO₃ film is a promising candidate for the applications in microwave tunable devices.     

Chemical solution processing and characterization of Ba(Zr,Ti)O<Subscript>3</Subscript>/LaNiO<Subscript>3</Subscript> layered thin films

Ba(Zr,Ti)O₃/LaNiO₃ layered thin films have been synthesized by chemical solution deposition (CSD) using metal-organic precursor solutions. Ba(Zr,Ti)O₃ thin films with smooth surface morphology and excellent dielectric properties were prepared on Pt/TiO _x /SiO₂/Si substrates by controlling the Zr/Ti ratios in Ba(Zr,Ti)O₃. Chemically derived LaNiO₃ thin films crystallized into the perovskite single phase and their conductivity was sufficiently high as a thin-film electrode. Ba(Zr,Ti)O₃/LaNiO₃ layered thin films of single phase perovskite were fabricated on SiO₂/Si and fused silica substrates. The dielectric constant of a Ba(Zr_0.2Ti_0.8)O₃ thin film prepared at 700°C on a LaNiO₃/fused silica substrate was found to be approximately 830 with a dielectric loss of 5% at 1 kHz and room temperature. Although the Ba(Zr_0.2Ti_0.8)O₃ thin film on the LaNiO₃/fused silica substrate showed a smaller dielectric constant than the Ba(Zr_0.2Ti_0.8)O₃ thin film on Pt/TiO _x /SiO₂/Si, small temperature dependence of dielectric constant was achieved over a wide temperature range. Furthermore, the fabrication of the Ba(Zr,Ti)O₃/LaNiO₃ films in alternate thin layers similar to a multilayer capacitor structure was performed by the same solution deposition process.     

Controllable preparation of nanosized TiO<Subscript>2</Subscript> thin film and relationship between structure of film and its photocatalytic activity

TiO₂ nano-crystalline film and fixed bed photocatalytic reactor were prepared by the sol-gel process using tetrabutylorthotitanate as a precursor and glass tube as the substrate. XRD, AFM, SEM and thickness analysis results indicate that the preparation of nano-crystalline film can be controlled by optimizing experiment process. Under the optimized process, the phase of TiO₂ in film is anatase, and the grain size is 3–4 nm. The size of particles, which is about 20-80 nm, can be controlled. The thickness of monolayer film is in nanometer grade. The thickness and particles size in films growing on nanometer film can also be controlled in nanometer grade. As a result, the crack of film can be effectively avoided. Rhodamine degradation results using UV-Vis spectrophotometer show that the activity of nano-crystalline film in the photocatalytic reactor has a good relation with the diameter of TiO₂ particles, that is, the film shows high activity when the size is 20 –30 nm and greatly reduced when the size is above 60 nm. The activity of film does not decrease with the increase of film thickness, and this result indicates that nano-crystalline film has no ill influence on the transmissivity of ultraviolet light.     

Solvent effects on the photoelectrochemical properties of WO<Subscript>3</Subscript> and its application as dopamine sensor

Nanostructured WO₃ films were produced by a simple method using ammonium tungstate dissolved in different solvents: ethanol, PEG 300, and a mixture of ethylene glycol with PEG 300. The suspensions were deposited on an FTO substrate by drop casting method and calcined at 500 °C in air atmosphere. The films were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), UV–Vis diffuse reflectance spectroscopy, and photoelectrochemistry measurements. FTO substrates were fully covered by a thin and adherent WO₃ film, which presented a nanostructure with particle diameter of 30–80 nm. XRD confirms the monoclinic structure of WO₃. Ethanol samples presented higher photocurrent for water oxidation, compared to other solvents. However, these electrodes showed high fragility and the response did not present repeatability. High adhesion was obtained with PEG as solvent (by itself or mixed with ethylene glycol). In addition, WO₃ was applied as a photoelectrochemical sensor to detect dopamine under visible light irradiation. The developed sensor showed photosensitivity to dopamine with reproducibility, stability, wide linear range, and low detection limit (0.30 μM).     

Preparation and Formation Mechanism of Porous TiO2 Films Using PEG and Alcohol Solvent as Double-Templates

Porous nanocrystalline TiO₂ anatase thin films have been synthesized on glass substrates via a sol-gel dip-coating method. The coating sol was obtained by suppressed hydrolysis of Ti(OC₄H₉)₄ through the addition of complexing molecules as stabilizers in an alcohol solution containing polyethylene glycol (PEG). Chemical changes taking place during the sol-gel process were discussed based on IR spectra analysis. A model concerning the pore formation was established to explain the role of PEG and solvent with core-shell configuration as double-templates. The structural characteristics of porous TiO₂ films were found to greatly depend on the concentration and molecular weight of PEG, the types of stabilizing agents and solvents. The pore size of the films was tunable in the range of 10–500 nm and their surface area varied from 51 to 72 m²·g^–1.     

Study on parylene/SiO<Subscript>2</Subscript> composite films for protection of KDP crystals

In this paper, parylene/SiO₂ composite films were reported to protect KDP crystals, indispensable cells in ICF experiments, from moisture. FTIR, UV-NIR spectra and XPS were used to analyze the properties of films. Laser damage threshold of films was also measured. With porous silica coating on surface of parylene film, the transmittance of dual layers can be raised to more than 91%. KDP crystals with poly(p-xylylene)/SiO₂ coating could work well in ambient atmosphere for more than half a year.     

Fabrication of Ordered TiO2 Porous Thin Films by Sol-Dipping PS Template Method

Monolayer polystyrene spheres (∼400 nm) array templates were assembled orderly on clean glass substrates by dip-drawing method from emulsion of PS and porous TiO₂ thin films were prepared by using sol-dipping template method to fill TiO₂ sol into the interstices among the close-packed PS templates and then annealing to remove the PS templates. The effects of TiO₂ precursor sol concentration and dipping time in sol on the porous structure of the thin films were studied. The results showed pore size of the ordered TiO₂ porous thin film depended mainly on PS size and partly on TiO₂ sol concentration. The shrinkage of pore diameter was about 10% for 0.2 M and 20% for 0.4 M TiO₂ sol concentrations. X-ray diffraction (XRD) spectra indicated the porous thin film was anatase structure. The transmittance spectrum showed that optical transmittance of the porous thin film kept above 70% beyond the wavelength of 430 nm. Optical band-gap of the porous TiO₂ thin film (fired at 550^∘;C) was 3.12 eV.     

Evaluation of the structural,optical and photocatalytic properties of nitrogen-fluorine co-doped TiO<Subscript>2</Subscript> thin films

Nanostructured TiO₂ films were synthesized by a modified sol–gel method using Pluronics P-123 (EO₂₀PO₇₀EO₂₀) as templating agent, titanium n-butoxide [Ti(OC₄H₉)₄] as inorganic precursor, and ammonium fluoride (NH₄F) as the source of N and F dopant atoms in order to prepare sols of x(NF) TiO₂ (x=2, 5, 10, 20 wt%). The thin film preparation was made by spin coating, followed by calcination at 400 °C. The as-prepared TiO₂ and xNF-TiO₂ films were characterized by XRD, Raman spectroscopy, FTIR, TGA-DTA, SEM, UV–Vis diffuse reflectance spectroscopy and EPR. XRD and Raman spectroscopy show that the crystalline structure of these samples consists exclusively of the anatase phase. The band gap (E _g ) values for the doped 10 and 20 NF-TiO₂ film systems were found to be significantly smaller than those corresponding to the rest of the other TiO₂ films. The photocatalytic properties of these films are investigated by following the degradation of methyl orange in aqueous solution under UV irradiation. The photodecomposition is mainly a direct function of the amount of NF present in the TiO₂ matrix. The 20NF-TiO₂ sample shows the highest activity of all the samples studied.     

Preparation of Ba(Ti,Sn)O<Subscript>3</Subscript> thin films by PVP-assisted sol–gel method and their dielectric properties

Ba(Ti_1−x Sn _x )O₃ (x = 0.10 or 0.15) thin films were deposited on Si(100) and Pt(111)/TiO _x /SiO₂/Si(100) substrates via sol–gel spin-coating. Crack-free thin films could be obtained by single-step deposition, where the thickness was about 0.46 and 0.29 μm at 1000 and 2000 rpm, respectively. Circular delaminated parts 100 μm in diameter, however, tended to appear in thicker films deposited at 1000 rpm. On both kinds of substrates, the films were crystallized between 500 and 600 °C, where the perovskite phase emerged as the primary phase, and the formation of single-phase perovskite was basically achieved between 700–800 °C. The films deposited on Pt(111)/TiO _x /SiO₂/Si(100) substrates, however, tended to have small SnO₂ and BaCO₃ diffraction peaks, which decreased with increasing spinning rate. The dielectric properties were evaluated on the films deposited on Pt(111)/TiO _x /SiO₂/Si(100) substrates at 2000 rpm. The films prepared by single-step depositions had dielectric constants of 350 and 230, and dielectric loss of 0.30 and 0.10 at x = 0.1 and 0.15, respectively. The films prepared by two time deposition had dielectric constants of 450 and 250, and dielectric loss of 0.21 and 0.19 at x = 0.10 and 0.15, respectively.     

Hydrothermal synthesis,structure and photocatalytic property of nano-TiO<Subscript>2</Subscript>-MnO<Subscript>2</Subscript>

TiCl₄ and MnSO₄· H₂O as raw materials are hydrolyzed stiochiometrically, following the intermediate of oxide hydrating reacts at 150°C, 0.5 MPa in high-pressure reactor, after filtering, washing and drying, nanometric TiO₂-MnO₂ (Ti_1-X Mn _X O₂) is prepared. The effects of the reaction temperature and time on nanometric TiO₂-MnO₂ are also discussed. XRD shows that the product is TiO₂-MnO₂ with amorphous phase. After being sintered at above 780 °C, it transfers into Ti_1-X Mn _X O₂ with a rutile structure. TEM shows that TiO₂-MnO₂ is the spherical particle. And the average diameter of the particles is 20 nm. The optical absorbance was determined by UV-265 spectrophotometer after dispersing the sample in the mixture of water and glycerol with the ratio of 1 : 1 equably. It is found that the nano-material possesses the advantages of both nano-TiO₂ and nano-MnO₂, and it has strong absorption in the UV and visible region. Photodegradation of dyes in an aqueous solution is investigated using nanometricTiO₂-MnO₂ as a photocatalyst. The results show that after 60 min illumination, the decolorization rate of the acidic red B and acidic black 234 dye can be as high as 100%.