庚二酸·邻菲啰啉合铽配合物的合成与晶体结构

用水热技术合成了配位高聚物[Tb(Hpim)(pim)(phen)]n·1.5nH2O,并通过元素分析、红外光谱和单晶X射线衍射技术确定了其组成和晶体结构.此晶体属三斜晶系,空间群为P墿,晶胞参数a=1.1049(6)nm,b=1.1608(7)nm,c=1.2557(7)nm,α=110.590(9)°,β=99.999(10)°,γ=110.775(8)°;V=1.3252(13)nm3;Z=2;R=0.0492,wR=0.1036.配合物单元通过氢键及邻菲啉之间的芳环堆积效应构筑成纳米链结构并组装成三维超分子结构.     

[NEt~4][Mn(salophen)(H~2O)~2]~2[Fe(CN)~6]·H~2O· CH~3OH超分子化合物的 合成和结构

室温下将[NEt~4]~3[Fe(CN)~6]和[Mn(salophen)(H~2O)(CH~3OH)]ClO~4反应,得到了超分子化合物[NEt~4][Mn(salophen)(H~2O)~2]~2[Fe(CN)~6]·H~2O·CH~3OH(salophenH~2=双水杨醛缩邻苯二胺),并对其进行了晶体结构测定。结果表明,该晶体属三斜晶系,空间群P1,晶胞参数a=1.2150(4)nm,b=1.4834(6)nm,c=1.6625(6)nm,α=81.896(7)°,β=76.980(8)°,γ=81.120(6)°,V=2.872(2)nm^3,Z=2,D~c=1.388g·cm^-^3。晶体的各部分间以氢键连接成网状超分子体系。     

新型超分子化合物(H3NCH2CH2NH3)2[(HPO4)2Mo5O15]的晶体结构

首次通过水热方法合成了新型超分子化合物(H3NCH2CH2NH3)2[(HPO4)2Mo5O15]的晶体结构,并通过X衍射进行了结构表征,晶体学数据为:单斜晶系,C2/c空间群,a=1.766 6(4)nm,b=1.003 4(2)nm,c=1.376 7(3)nm,α=90°,β=96.90(3)°,γ=90°,ν=2.422 7(8)nm3,Z=4,R=0.043 1,wR2=0.128 7.     

有机三膦酸锌配合物的合成与晶体结构

合成了一种新型的有机三膦酸配体H6aptp[1-氨基-丙基-1,1,3-三膦酸],并在水热条件下合成了它的锌配合物[Zn(H4aptp)(2,2′-bipy)(H2O)].2H2O.用红外、质谱、元素分析、热重分析等手段对其进行了表征并解析了它的单晶结构.实验结果表明:配合物属三斜晶系,空间群为P,ī晶胞参数为a=0.66814(5)nm,b=1.00929(7)nm,c=1.5438(11)nm,α=81.544(10)°,β=79.066(10)°,γ=82.278(10)°,Z=2,V=1.00495(13)nm3,配合物在空间上以一维链状方式排列.     

有机-无机自由基盐(DBTTF)6PMo12O40·2H2O的合成、性质和晶体结构

用电解法制备了有机-无机自由基盐(DBTTF)6PMo12O40·2H2O.用红外光谱、电子光谱和电子自旋共振谱进行了表征,测定了其磁化率、导电性和单晶的晶体结构,该晶体属三斜晶系,P1空间群,晶胞参数为a=1.378 7(7)nm,b=1.420 4(2)nm,c=1.570 2(2)nm,α=104.570(8)°,β=103.41(2)°,γ=95.80(2)°,V=2.853(2)nm3,Z=1,Dc=2.142 Mg·m-3,R=0.072 7.     

含能配合物[Pb(AZTZ)(bpy)(H2O)·2H2O]n合成、结构及燃烧催化性能

设计合成了含能配合物[Pb(AZTZ)(bpy)(H2O)·2H2O]n(1)(AZTZ=5,5’-偶氮四唑阴离子, bpy=2,2’-联吡啶), 用X射线单晶衍射法测定了其分子结构. 该晶体属三斜晶系, P1空间群, a=0.7341(6) nm, b=1.0050(8) nm, c=1.3367(1) nm, α=95.354(1)°, β=101.450(1)°, γ=101.233(1)°, V=0.8927(1) nm3, Z=2, S=1.030. 利用元素分析、红外光谱以及热重分析等手段对标题化合物进行了表征, 并研究了配合物(1)对固体双基推进剂的燃烧催化作用. 结果表明, 配合物(1)可以有效地提高固体双基推进剂的燃速.     

N-(2-氟苯甲酰基)-N''''4-甲基苯基硫脲的结构和构型研究

合成了未见报道的N-(2-氟苯甲酰基)-N′-4-甲基苯基硫脲(FBTT),并测定了其晶体结构.晶体属三斜晶系,空间群P1,a=0.8413(5)nm,b=0.9532(5)nm,c=0.9927(6)nm,α=66.24(2)°,β=85.40(2)°,γ=72.27(2)°,V=0.693.2(7)nm3,Z=2.利用量子化学密度泛函理论,以步长为30°旋转扭角θ[N(2)-C(14)-N(1)-H(12)]得势能曲线.优化的最稳定的构型与得到的晶体结构一致.讨论了分子的构型,估算了氢键的键能.     

[Co(aipamp或apamp)(amp)Cl][ZnCl4]两体系中四个几何异构体的合成、结构解析以及量子化学计算

利用单晶X射线衍射解析了[Co(aipamp)(amp)Cl][ZnCl4] (aipamp=2-[(2-氨基异丙基)氨基甲基]呲啶,amp=2-(氨基甲基)吡啶)体系中两个异构体Ⅱ的结构和[Co(apamp)(amp)Cl][ZnCl4](apamp=2-[(2-氨基丙基)氨基甲基]呲啶)体系中一异构体Ⅲ的结构.晶体Ⅰ属单斜晶系,空间群P21/n, a=1.08028(10) nm, b=1.84843(18) nm, c=1.25582(12) nm, α=90.00°, β=97.150(2)°, γ=90.00°, V=2.4881(4) nm3, Dc=1.620 g·cm-3, Z=6, F(000)=582, R=0.0361, wR=0.0974,晶胞中含4个配合物阳离子,4个[ZnCl4]2-阴离子;晶体II属三斜晶系,空间群 P1, a=0.9957(2) nm, b=1.0207(3) nm, c=1.1478(3) nm, α= 102.584(5)°, β=91.559(5)°, γ=98.462(5)°, V=1.1240(5) nm3, Dc=1.699 g·cm-3, Z=2, F(000)=580.00, R=0.0449, wR=0.0984,晶胞中含2个配合物阳离子,2个[ZnCl4]2-阴离子.晶体III属三斜晶系,空间群P1, a=0.82423(7) nm, b=1.7199(8) nm, c=1.36399(1) nm, α=86.6350(10)°, β=81.7140(10)°, γ=67.6230(10)°, V=1.10278(15) nm3, Dc=1.734 g·cm-3, Z=2, F(000)=582.00, R=0.0332, wR=0.0823,晶胞中含4个配合物阳离子,4个[ZnCl4]2-阴离子.三异构体中Co3+为六配位,且配合物阳离子中具有C-H…π 结构.用一、二维核磁共振技术解析了第四个配合物在溶液中的结构,论证了该异构体属于[Co(apamp)(amp)Cl][ZnCl4]体系.4个异构体具有共同的结构特征--分子内C-H…π结构.     

Schiff碱Cu(II)配合物的结构、光谱及电化学性质

为了探讨配合物结构对性质的影响，合成了两个Schiff碱的铜配合物{[Cu(II) (L1)]ClO_4(1)和[Cu(II)(L2)-(H_2O)_2](BF_4)_2(2)}，并用红外、质谱和元素分 析对它们进行了表征，用X射线衍射方法测定了它们的昌体结构。实验结果表明： 配合物1和2均属三斜晶系，P1空间群。1的晶胞参数为a = 1.1147(6)nm, b = 1. 1481(7)nm, c = 0.770(3)nm; α = 98.81(4) °,β=106.94(4)°γ= 66.49(4)° ;V=0.8715(8)nm~3,Z=2,R=0.044.2的晶胞参数为a=1.0819(4)nm, b = 1.4095(6) nm, c = 1.0192(4)nm; α=96.54(4)°,β=106.18(3)°,γ=80.51(3)°;V=1. 4681(5)nm~3, Z=2, R = 0.068.此外，配合物1的Cu-O(1)键长[0.1880(5)nm]和可 见吸收波长(λ_(max)=557nm)比2[0.1982(6)nm,λ_(max)=605nm]短。配合物2在- 0。80～-1.20V范围内出现两个氧化和两个还原过程。     

烯唑醇锌盐配合物的合成与结构表征

合成了 2个新配合物ZnL4 Cl2 和ZnL4 (H2 O) 2 ·(NO3 ) 2 (L =烯唑醇 ) ,通过元素分析、IR光谱和核磁共振谱表征了配合物的结构 .X射线单晶衍射结构分析表明 :ZnL4 Cl2 晶体属三斜晶系 ,空间群P墿,晶胞参数 :a =0 882 80(7)nm ,b =1 370 94(11)nm ,c=1.5 182 9(13)nm ,α =91.0 72 (10 )°,β =98 5 97(10 )°,γ =10 6 .779(8)° ,V =1.735 8(2 )nm3 ,Z =1;ZnL4 (H2 O) 2 ·(NO3 ) 2 晶体属单斜晶系 ,空间群Cc,晶胞参数 :a =1.5 2 430 (13)nm ,b =1.5 85 4(2 )nm ,c =3.336 1(4 )nm ,α =90 0 0 0° ,β =10 0 .2 2 7(8)° ,γ =90 0 0 0°,V =7 934 (2 )nm3 ,Z =1     

Synthesis and structures of gallium amido imido phenyl clusters (PhGa)(4)(NH(i)Bu)(4)(N(i)Bu)(2) and (PhGa)(7)(NHMe)(4)(NMe)(5)

The phenylgallium-containing clusters constructed with bridging imido and amido ligands, (PhGa)(4)(NH(i)Bu)(4)(N(i)Bu)(2) (1) (51% yield) and (PhGa)(7)(NHMe)(4)(NMe)(5) (2) (31% yield), were synthesized from the room-temperature reactions of bis(dimethylamido)phenylgallium, [PhGa(NMe(2))(2)](2), with isobutylamine and methylamine, respectively. The reaction of [PhGa(NMe(2))(2)](2) in refluxing isobutylamine (85 degrees C) afforded (Ph(2)GaNH(i)Bu)(2) as one of the products, while the reaction of [PhGa(NMe(2))(2)](2) with methylamine at 150 degrees C afforded compound 2 in only 9% yield. Compound 1 possessed an admantane-like Ga(4)N(6) core, whereas compound 2 had a novel Ga(7)N(9) core constructed with both chair- and boat-shaped Ga(3)N(3) rings. The presence of several isomers of compounds 1 and 2 in solution is discussed along the structural similarities with other known gallium-nitrogen clusters and with gallium nitride.     

Transient mixed-valence character of Re(I)(4)(CO)(12)(4,4'-bpy)(4)Cl(4)

This study addresses, in detail, the orbital nature and the extent of metal-metal communication in the lowest emitting triplet state of Re(4)(CO)(12)(4,4'-bpy)(4)Cl(4) (where 4,4'-bpy = 4,4'-bipyridine) as well as the symmetry of the lowest (3)MLCT manifold in comparison to that of the ground state. All spectral evidence points to (1). a (3)MLCT excited manifold localized between a single Re(I) corner and an adjacent bridging ligand, (2). a transient mixed-valence state that is completely localized between a single transiently oxidized Re center and the adjacent metals, and (3). a second-order charge transfer from a localized transiently reduced bridging ligand to the adjacent Re(I) center to which it is attached, effectively lowering its oxidation state. The orbital nature of the lowest (3)MLCT manifold is fully corroborated by a molecular orbital diagram derived from quantum chemical modeling studies, while the existence of the localization, localized mixed valency, and second-order charge transfer rely on spectral evidence alone. This work makes use of low-temperature time-resolved infrared (TRIR) techniques as well as a luminescence study. Many of the nuances of the luminescence and TRIR data interpretation are extracted from statistical analysis and quantum chemical modeling studies. The relative concentrations of the dominant conformers that exist for Re(4)(CO)(12)(4,4'-bpy)(4)Cl(4) have also been estimated from Boltzmann statistics.     

The Pd(4)(dppm)(4)(H)(2)(2+) cluster: a precatalyst for the homogeneous hydrogenation of alkynes

The catalytic properties of the title cluster toward the homogeneous hydrogenation of phenylacetylene, diphenylethyne and phenyl-1-propyne have been investigated as a function of temperature, pressure, solvents, substrate and cluster concentrations, and counterions. The title cluster is a precatalyst that exhibits a good catalytic activity under mild conditions (1 atm of H(2) at 20 degrees C) for the hydrogenation of alkynes and alkenes. For the alkyne substrates, the turnover frequencies (tof's) range between 200 and 500 h(-)(1), and the product distribution varies as: cis-products, 75-90%; trans-products; 0-8% after 3 h of reaction. Based on the graphs -d[substrate]/dt vs [Pd(4)](1/2), the mechanism indicates a cluster dissociation into two dimers (presumably of the type Pd(2)(dppm)(2)(H)(solvent)(+)). The variations of tof (or -d[substrate]/dt) as a function of [substrate] and pressure of H(2) are linear. At 1600 psi of H(2), the tof can reach 2500-3000 h(-)(1) (in THF). The tof also increases with temperature reaching a maximum at approximately 35 degrees C (tof: 1000-1300 h(-)(1)), but at higher temperatures cluster decomposition begins to occur, leading to a rapid decrease in rates of catalysis. At 50 degrees C, no catalysis is observed. The hydrogenation reaction can be stopped at the corresponding cis-alkenes with approximately 95% yields, depending on the substrate and experimental conditions used. The tof's also vary with the solvent, where stronger coordinating solvent molecules give higher tof's. In addition, the tof's do not change with the nature of the counterion, which acts as "spectator" in the catalysis.     

From fullerene-mixed peroxide to open-cage oxafulleroid C(59)(O)(3)(OH)(2)(OO(t)()Bu)(2) embedded with furan and lactone motifs

[reaction: see text] Removal of one carbon atom from the C60 cage is achieved under mild conditions. The process involves the formation of fullerene-mixed peroxide, subsequent Lewis acid induced cleavage of O-O and C-O bonds, and thermolysis at 75 degrees C. In the proposed mechanism, the carbon atom is deleted as CO and an oxygen atom occupies the vacancy to form a furan ring. Single-crystal X-ray analysis confirmed the results.     

(Cyclopentadienyl)(1-methylallyl)(butadiene)titanium

(Cyclopentadienyl)(1-methylallyl)(butadiene)titanium, C₁₃H₁₈Ti, has been obtained from the reaction between (C₅H₅)TiCl₃ or (C₅H₅)TiCl₂ and 1-methylallylmagnesium bromide in ether. The brown compound is diamagnetic and thermally stable, but very sensitive to oxygen. The nature of the new compound has been elucidated from its reaction with bromine and by IR, ¹H and ¹³C NMR, and mass spectral analysis.     

Preparation and characterization of the fullerene diols 1,2-C(60)(OH)(2), 1,2-C(70)(OH)(2), and 5,6-C(70)(OH)(2)

The simple fullerene diols C(60)(OH)(2) and C(70)(OH)(2) were prepared by addition of RuO(4) followed by acid hydrolysis. The 1,2-C(60)(OH)(2) isomer was formed from C(60), and two isomers (1,2 and 5,6) of C(70)(OH)(2) were formed in the RuO(4) hydroxylation of C(70). These compounds are much more soluble in THF and dioxane than the parent fullerenes. More highly hydroxylated materials are formed as well.