Resonance Rayleigh scattering determination of trace amounts of Al in natural waters and biological samples based on the formation of an Al(III)-morin-surfactant complex

A novel method for the determination of trace amounts of Al(III) based on resonance Rayleigh scattering (RRS) has been developed. In the presence of some surfactants, Al(III) can react with morin and form an Al(III)-morin-surfactant complex, which results in the enhancement of RRS intensity and the appearance of the corresponding RRS spectral characteristics. Their maximum scatter peaks are at 476 nm for the cetyltrimethylammonium bromide (CTAB) system, 489 nm for the cetylpyridinium chloride (CPC) system, 474 nm for the Triton X-100 system, and 473 nm for the Tween-20 system. The enhanced RRS intensity is directly proportional to the concentration of Al(III). The detection limits are in the range of (0.50-1.2)×10⁻⁷ mol l⁻¹ depending on the surfactant. The characteristics of RRS spectra of the complexes, the optimum conditions of these reactions and the influencing factors have been investigated. The method has high selectivity, and was successfully applied to the determination of Al(III) in natural and biological samples. Furthermore, according to different complexation capacity of Al(III)-morin-CTAB system under two pH conditions, speciation analysis of Al(III) in natural waters was explored. The labile monomeric Al fraction (mainly inorganic Al, Al_i) is determined at acidic pH and the total monomeric Al fraction (Al_a) is determined at alkaline pH. The results are in agreement with those obtained by Driscoll’s 8-hydroxyquinoline extraction-ion exchange method.     

Development of an optical fibre Al(III) sensor based on immobilised chrome azurol S

Chrome azurol S immobilised on XAD-2 has been used in this study as a reagent phase for the development of an optical fibre Al(III) sensor. Using a kinetic approach, this sensor was able to give a linear response in the Al(III) concentration range of 1.3 x 10(-5)-2.0 x 10(-4) M with a limit of detection of 1.0 x 10(-4) M. The optimum responses were obtained at pH 6.0 and when the solution was stirred. The sensor response was found to have a repeatability and reproducibility of 1.6% and 5.8%, respectively. The results obtained for Al(III) determination in aqueous sample were in good agreement with those obtained using graphite furnace-atomic absorption spectrometry.     

Capillary electrophoretic determination of Ga(III) based on the formation of a heteropolyoxomolybdate complex

A novel capillary electrophoretic (CE) method was developed for the determination of Ga(III). The so-called Anderson-type [GaMo6O24H6]3- complex was readily formed by the reaction of Mo(VI) with Ga(III) in 0.050 M monochloroacetate buffer (pH 2.0) and the precolumn complex-formation reaction was applied to the CE determination of Ga(III) with direct UV detection at 240 nm. The peak area was linearly dependent on the concentration of Ga(III) in the range of 5.0 x 10(-7)-5.0 x 10(-5) M. Owing to the high molar absorptivity of the Anderson anion, a detection limit of 2.0 x 10(-7) M (signal-to-noise ratio=3) was achieved. The advantage of the present method is that the presence of large excesses of Al(III) and In(III) does not cause interference.     

Determination of trace aluminum (III) using a novel cerium (IV)-calcein chemiluminescence detection

A simple, sensitive and selective chemiluminescence (CL) method was developed for the direct determination of aluminum (Al). This method is based on that the weak CL of cerium (IV)-calcein can be greatly enhanced by Al(III). The calibration curve was linear over the range 2.0 x 10(-10) to 4.0 x 10(-8)g mL(-1) with a detection limit of 8 x 10(-11)g mL(-1) (3sigma). The R.S.D. was 2.5% by 11 replicated determinations of 1.0 x 10(-9)g mL(-1) Al(III). The proposed method has been used to determine the concentration of Al(III) in real water samples with satisfactory results. The mechanism of the CL reaction was also discussed.     

Polarographic determination of osmium with the osmium(VIII)-cerium(IV)-arsenic(III) system

A highly sensitive and novel polarographic method has been developed for determination of ultratrace amounts of osmium, based on the catalysis of the cerium(IV)-arsenic(III) reaction by osmium(VIII). The reaction rate is monitored by measuring the arsenic(III) with a single-sweep oscillopolarograph. Osmium concentrations from 7.0 x 10(-11) to 5.0 x 10(-9)M can be determined by the initial rate method. The method has been applied to determination of osmium in refined ore and chlorination residues with satisfactory results.     

Modeling and electrokinetic evidences on the processes of the Al(III) sorption continuum in SiO2(s) suspension

Reactions of Al(III) at the interface between SiO2(s) and aqueous solution were characteristically and quantitatively studied using electrophoretic methods and applying a surface complexation/precipitation model (SCM/SPM). The surface and bulk properties of Al(III)/SiO2 suspensions were determined as functions of pH and initial Al(III) concentration. Simulated modeling results indicate that the SCM, accounting for the adsorption mechanism, predicts sorption data for low surface coverage only reasonably well. Al(III) hydrolysis and surface hydroxide precipitation must be invoked as the Al(III) concentration and/or pH progressively increase. Accordingly, the three processes in the Al(III) sorption continuum, from adsorption through hydrolysis to surface precipitation, could be identified by the divergence between the SCM/SPM predictions and the experimental data. SiO2(s) suspensions with low Al(III) concentrations (1 x 10(-4) and 1 x 10(-5) M) exhibit electrophoretic behavior similar to that of a pure SiO2(s) system. In Al(III)/SiO2 systems with high Al concentrations of 1 x 10(-3), 5 x 10(-3) and 1 x 10(-2) M, three charge reversals (CR) are observed, separately representing, in order of increasing pH, the point of zero charge (PZC) on the SiO2 substrate (CR1), the onset of the surface precipitation of Al hydroxide (CR2), and at a high pH, the PZC of the Al(OH)3 coating (CR3). Furthermore, in the 1 x 10(-3) M Al(III)/SiO2(s) system, CR2 is consistent with the modeling results of SCM/SPM and provides evidence that Al(III) forms a surface precipitate on SiO2(s) at pH above 4. SiO2(s) dissolution was slightly inhibited when Al(III) was adsorbed onto the surface of SiO2(s), as compared to the dissolution that occurs in a pure SiO2(s) suspension system. Al hydroxide surface precipitation dramatically reduced the dissolution of SiO2(s) because the Al hydroxide passive film inhibited the corrosion of the SiO2(s) surface by OH- ions.     

A novel resonance Rayleigh scattering aptasensor for dopamine detection based on an Exonuclease III assisted signal amplification by G - quadruplex nanowires formation

A new method was constructed for detecting dopamine based on aptamer-specific recognition and resonance Rayleigh scattering (RRS) of G - quadruplex nanowires (G - wires). The dopamine aptamer was used to recognize the target of dopamine, and the Exonuclease III was applied to cleave the hairpin DNA, and the G - wire formation was induced in the presence of K⁺ and Mg²⁺. This phenomenon was confirmed by polyacrylamide gel electrophoresis. Thus, a quantitative relationship between the RRS intensity of the G - wires and the dopamine concentration was established. The experimental conditions were optimized, such as the concentration of Mg²⁺, reaction temperature, reaction time and the concentration of Exonuclease III in the reaction system, and the interference substances were investigated, such as uric acid, ascorbic acid and serotonin. Under the optimal conditions, there was a good linear relationship between the RRS and the logarithm of dopamine concentration in the range from 5.0 × 10^-11 M to 1.0 × 10^-8 M (r = 0.995), with a detection limit of 1.2 × 10^-11 M. The novel method for dopamine detection showed excellent selectivity and high sensitivity, and could be used to detect dopamine in mice brain tissues.     

Chemometrics-assisted simultaneous determination of cobalt(II) and chromium(III) with flow-injection chemiluminescence method

In this paper, a flow-injection chemiluminescence (CL) system is proposed for simultaneous determination of Co(II) and Cr(III) with partial least squares calibration. This method is based on the fact that both Co(II) and Cr(III) catalyze the luminol-H(2)O(2) CL reaction, and that their catalytic activities are significantly different on the same reaction condition. The CL intensity of Co(II) and Cr(III) was measured and recorded at different pH of reaction medium, and the obtained data were processed by the chemometric approach of partial least squares. The experimental calibration set was composed with nine sample solutions using orthogonal calibration design for two component mixtures. The calibration curve was linear over the concentration range of 2 x 10(-7) to 8 x 10(-10) and 2 x 10(-6) to 4 x 10(-9) g/ml for Co(II) and Cr(III), respectively. The proposed method offers the potential advantages of high sensitivity, simplicity and rapidity for Co(II) and Cr(III) determination, and was successfully applied to the simultaneous determination of both analytes in real water sample.     

A water-soluble fluorescent fluoride ion probe based on Alizarin Red S-Al(III) complex

A new water-soluble fluorescent fluoride ion signaling system has been developed based on the ligand exchange mechanism in aqueous medium. This procedure is based on the exchange of two Alizarin Red S (ARS) molecules coordinated to Al(III) by fluoride ion without interference from other common anions. The binary complex of ARS with Al(III) provides a sensitive signaling system for fluoride ion in the concentration range from 5x10(-6) to 3x10(-4) M. The ligand exchange reaction of ARS-Al(III) complex with fluoride ion has been investigated by UV-vis and fluorescence spectroscopies combined with the AM1 semi-empirical quantum chemical calculations. The pale orange fluorescence (lambdamax=575 nm) exhibited by the complex upon excitation at 435 nm decreases in intensity with fluoride addition with a detection limit of 0.1 mg L-1.     

Resonance Rayleigh scattering spectrum for the chelate of lanthanum(III) with sodium tanshinon IIA silate and its analytical application

In a pH 3.6–5.0 HAc-NaAc buffer solution, when sodium tanshinon IIA silate (STSIIA) reacts with La(III) to form a chelate, the resonance Rayleigh scattering (RRS) intensity can be enhanced greatly and a new RRS spectrum will appear. The maximum RRS peak is located at 306 nm and the RRS intensity is proportional to the concentration of STSIIA in a certain range. The method is very sensitive and the detection limit for STSIIA (3σ/K) is 82.12 ng·mL⁻¹. The optimum reaction conditions and the effect of coexisting substances have been investigated. A new, simple and fast method for the determination of STSIIA based on RRS method is developed. It can be applied to the determination of STSIIA in the synthesis samples and Nuoxinkang injection. Combined with infrared absorption and NMR spectra, the structure of the chelate and the reasons of RRS enhancement are also discussed.     

The second-order scattering study of the Tb(III)-RNA and determination of RNA

The second-order scattering technique (SOS), using a common spectrofluorometer, was first developed as a sensitive instrumental analysis method for determination of the ribonucleic acid (RNA). The results indicate that RNA had a weak SOS peak and the Tb(III) ion can greatly enhance the SOS intensity of RNA with the maximum peak located at 612.0 nm. Mechanism study shows that the peak results from the long-range assembly of Tb(III) ion on the molecular surface of RNA. At the pH 7.50 and with cetyltrimethylammonium bromide (CTMAB) (6.0 x 10(-5)M), the enhanced SOS intensity was in proportion to the concentration of RNA in the range of 2.0 x 10(-8) to 2.0 x 10(-5)g/ml. The detection limit was 1.96 ng/ml. The relative standard deviation (five replicates) was within +/-5% in the linear range. This method has been used satisfactorily for the determination of both synthetic and real samples. In comparison with most other methods for the determination of ribonucleic acids, this method is more sensitive.     

Countercations direct one- or two-electron oxidation of an Al(III) complex and Al(III)-oxo intermediates activate C-H bonds

Hydrogen abstraction by aluminum(III)-oxo intermediates via reaction pathways reminiscent of late transition metal chemistry has been observed. Oxidation of M(+)[(IP(2-))(2)Al](-) (IP = iminopyridine, M = Na, Bu(4)N) yielded [Na(THF)(DME)][(IP(-))(IP(2-))Al(OH)] (3) or [(IP(-))(2)Al(OH)] (4), via O-atom transfer and subsequent C-H activation or proton abstraction, respectively.     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

A novel method for study of the aggregation of protein induced by metal ion aluminum(III) using resonance Rayleigh scattering technique

We present a novel method for the study of the aggregation of protein induced by metal ion aluminum(III) using resonance Rayleigh scattering (RRS) technique. In neutral Tris-HCl medium, the effect of this aggregation of protein results in the enhancement of RRS intensity and the relationship between the enhancement of the RRS signal and the Al concentration is nonlinear. On this basis, we established a new method for the determination of the critical induced-aggregation concentrations (C(CIAC)) of metal ion Al(III) inducing the protein aggregation. Our results show that many factors, such as, pH value, anions, salts, temperature and solvents have obvious effects. We also studied the extent of aggregation and structural changes using ultra-violet spectrometry, protein intrinsic fluorescence and circular dichroism to further understand the exact mechanisms of the aggregation characteristics of proteins induced by metal ion Al(III) at the molecular level, to help us to develop effective methods to investigate the toxicity of metal ion Al, and to provide theoretical and quantitative evidences for the development of appropriate treatments for neurodementia such as Parkinson's disease, Alzheimer's disease and dementia related to dialysis.     

Cetyltrimethylammonium bromide-enhanced chemiluminescence determination of uric acid using a luminol-hexacyanoferrate(III)-hexacyanoferrate(II) system.

A chemiluminescence (CL) method using flow injection (FI) was developed for the determination of uric acid based on the enhancement chemiluminescence intensity of luminol-hexacyanoferrate(III)-hexacyanoferrate(II) in the presence of cetyltrimethylammonium bromide and the uric acid species. The linear range was 7.0 x 10(-10) - 9.0 x 10(-7) M with a detection limit (3sigma) of 2.58 x 10(-10) M, which was about two orders of magnitude lower than those reported. The proposed method was used for the determination of uric acid in real samples.     

Application of the spectral correction method and "neural networks" for simultaneous determination of V(V) and Al(III)

Simultaneous determination of V(V) and Al(III) was performed by application of neural networks when the calibration matrix was performed using β-correction spectra. Two reactions between V(V) and Al(III) and Alizarin Red S (ARS) as a ligand have been investigated and applied for the simultaneous spectrophotometric determination of these metal ions. The parameters controlling behavior of the system were investigated and optimum conditions selected. Feed-forward neural networks have been trained to quantify considered metal ions in mixtures under optimum conditions. Sigmoidal functions were used in the hidden and output layers. Determinations were made over the concentration range 0.10-7.80 μg ml⁻¹ of V(V) and 0.11-4.20 μg ml⁻¹ of Al(III). Applying this method satisfactorily to simultaneous determination of these metal ions in several synthetic solutions with total relative standard error less than 4.02% validated the proposed method.     

Evaluation of certain pharmaceuticals with hexa-amminecobalt(III) tricarbonatocobaltate(III)-I Determination of some N-substituted phenothiazine derivatives

Hexa-amminecobalt(III) tricarbonatocobaltate(III) (HCTC) has been used for the determination of six N-substituted phenothiazine derivatives. The drugs in 10% v/v sulphuric acid medium were titrated with 5 x 10(-3)M HCTC with visual or spectrophotometric end-point detection. The stoichiometry of the reaction was assumed and a reaction mechanism suggested. The methods were applied to the analysis of dosage forms with results comparable to those given by the official methods.     

Polarographic determination of indium(III) after salting-out extraction of the bromide complex into acetonitrile

A simple and sensitive method has been developed for the polarographic determination of indium(III) after solvent extraction into acetonitrile, salted-out from aqueous solution with sodium bromide. The extracted indium(III)-bromide complex gives a well-defined d.c. wave with E(1 2 ) = -0.69 V vs. SCE. The wave-height is directly proportional to the concentration of indium(III) from 1.6 x 10(-6) to 3.0 x 10(-4)M with respect to the original aqueous solution. In the a.c. polarographic method, a linear calibration curve is obtained for indium(III) over the concentration range from 1.6 x 10(-6) to 1.5 x 10(-5)M, and interference from most foreign ions can be eliminated. In particular, 10.0 mg of Fe(III) and 2.5 mg of Tl(III) are tolerated when 1.0 g of ascorbic acid is added. The lower limit of determination is 8 x 10(-8)M indium(III) by the square-wave polarographic method.     

A fluorescent fluoride ion probe based on a self-organized ensemble of 5-hydroxyflavone-Al(III) complex

In the presence of Al(III) ions, 5-hydroxyflavone (5HF) through a complexation reaction in MeOH, shows dual fluorescence, characterized by a newly developed peak at 554nm upon excitation at 363nm. In this communication, the subsequent ligand exchange reaction of the complex with fluoride ion causing a fluorescence enhancement followed by a decrease in fluorescence intensity involving an intermediate mechanistic pathway, delivering a quantitative estimation route for fluoride ion in the concentration range from 5x10(-5) to 7x10(-4)M, has been reported. The ligand exchange reaction, without interference from other common anions, has been investigated by UV-vis and fluorescence spectroscopies combined with the AM1 semi-empirical self-consistent field quantum chemical calculations within UHF formalism in their ground state.     

Determination of ultratrace amounts of ruthenium(III) by the delayed autocatalytic reaction using citric acid.

A method for determination of ultratrace amounts (ppq levels) of ruthenium(III) was developed using a copper(II)-phthalocyanine-3,4',4",4"'-tetrasulfonic sodium salt (Cu-PTS) as an indicator in a potassium bromate autocatalytic reaction system. A satisfactory calibration curve of ruthenium(III) ion was obtained by the time measurement in the concentration range of 1 x 10(-13) M to 5 x 10(-12) M with the relative standard deviation (RSD) of 2.8% (n=5). The determination limits (3sigma) were 3.30 x 10(-14) M (3.34 ppq).