Synthesis and Characterization of New Metal-free and Metallophthalocyanines Substituted with Tetrathiadiazamacrobicyclic Moieties

New metal-free (5, 8) and metallophthalocyanines (6, 9) containing four diazatetrathiamacrobicycles or crosswise-disubstituted attached with two nitro and two macrobicyclic groups were synthesized by cyclotetramerization of 7,8-dicyano-4,11,22,23-tetrathia-1,14-diazapentacyclo[12.10.10.0^5,10.0^16,21.0^26,31]tetratriconta-5,7,12,19,20,21,28,30,32-nonane (3), 8,10-dihydro-8,11-diimino-4,14,24,34,-tetrathia-1,17-diazapentacyclo[15.13.13.0^5,13.0^19,23.0^28,33]tetratriconta-5,7,12,19,20,22,28,30,32-nonaisoiminoindoline (4) or 6-nitro-1,3,3-trichloroisoindolenine (7) in the presence of the corresponding metal salt or a strong organic base. The new compounds were characterized by a combination of elemental analysis and ¹H NMR, ¹³C NMR, IR, UV–Vis and MS spectral data.     

Rate constants for the reactions of Cl atoms with HCOOH and with HOCO radicals

Rate constants have been measured at room temperature for the reactions of Cl atoms with formic acid and with the HOCO radical: Cl + HCOOH → HCl + HOCO (R1) Cl + HOCO → HCl + CO₂ (R2) Cl atoms were generated by flash photolysis of Cl₂ and the progress of reaction was followed by time‐resolved infrared absorption measurements using tunable diode lasers on the CO₂ that was formed either in the pair of reactions ( R1 ) plus ( R2 ), or in reaction ( R1 ) followed by O₂ + HOCO → HO₂ + CO₂ (R3) In a separate series of experiments, conditions were chosen so that the kinetics of CO₂ formation were dominated either by the rate of reaction ( R1 ) or by that of reactions ( R1 ) and ( R2 ) combined. The results of our analysis of these experiments yielded: k₁ = (1.8₃ ± 0.12) × 10⁻¹³ cm³ molecule⁻¹ s⁻¹ k₂ = (4.8 ± 1.0) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 85–91, 2000     

Oligonucleotide Analogues with Integrated Bases and Backbone

The thiomethylene‐linked U*[s]U⁽*⁾ dimers 9 – 14 were synthesized by substitution of the 6‐[(mesyloxy)methyl]uridine 6 by the thiolate derived from the uridine‐5′‐thioacetates 7 and 8 followed by O‐deprotection. Similarly, the thiomethylene‐linked A*[s]A⁽*⁾ dimers 9 – 14 were obtained from the 8‐(bromomethyl)adenosine 15 and the adenosine‐5′‐thioacetates 16 and 17 . The concentration dependence of both H? N(3) of the U*[s]U⁽*⁾ dimers 9 – 14 evidences the formation of linear and cyclic duplexes, and of linear higher associates, C(8 or 6)CH₂OH and/or C(5′/II)OH groups favouring the formation of cyclic duplexes. The concentration dependence of the chemical shift for both H₂N? C(6) of the A*[s]A⁽*⁾ dimers 18 – 23 evidences the formation of mainly linear associates. The heteroassociation of U*[s]U⁽*⁾ to A*[s]A⁽*⁾ dimers is stronger than the homoassociation of U*[s]U⁽*⁾ dimers, as evidenced by diluting equimolar mixtures of 11 / 20 and 13 / 22 . A 1 : 1 stoichiometry of the heteroassociation is evidenced by a Job's plot for 11 / 20 , and by mole ratio plots for 9 / 18, 10 / 19, 12 / 21, 13 / 22 , and 14 / 23 .     

Condensation of 2-naphthylamine with aromatic aldehydes and substituted cyclohexane-1,3-diones

New 12-aryl(or hetaryl)-9-methyl(or 4-butoxyphenyl)-8,9,10,12-tetrahydro-7H-benzo[a]acridin-11-ones possessing two asymmetric carbon atoms (C⁹ and C¹²) were synthesized by condensation of 5-methyl-or 5-(4-butoxyphenyl)cyclohexane-1,3-dione with 2-naphthylamine and aromatic or heteroaromatic aldehydes. According to the ¹H NMR data, the products were isolated as mixtures of diastereoisomers.     

Synthesis and characterization of novel imidazolium-based ionic discotic liquid crystals with a triphenylene moiety

Two novel triphenylene-tethered imidazolium salts were synthesized either by the quaternization of 1-methylimidazole with an ω-bromo-substituted triphenylene or by the quaternization of a triphenylene-substituted imidazole with methyl iodide. Their chemical structures were determined by ¹H NMR, ¹³C NMR, IR, UV spectroscopy and elemental analysis. The thermotropic liquid crystalline properties of these salts were investigated by polarizing optical microscopy and differential scanning calorimetry. These triphenylene-based imidazolium salts with bromide or iodide as counterion show columnar mesophase properties over a wide temperature range.     

Alcohol,lactate and glutamate sensors based on oxidoreductases with regeneration of nicotinamide adenine dinucleotide

Flowthrough enzyme electrodes are reported for determinations of alcohol, lactate and glutamate. Oxidoreductases mixed with immobilized NAD⁺ cofactor are held between a suitable platinum electrode and a semipermeable membrane. The coenzyme is readily regenerated either directly by electrochemical oxidation or by using phenazine methosulphate (PMS⁺) as intermediate. Continuous flow conditions are used. The sensitivity obtained with the alcohol dehydrogenase electrode was 50, 620 or 810 nA mol^-1 of ethanol, respectively, when regeneration was done electrochemically or with 0.1 or 0.5 mM PMS⁺. The sensitivities for the lactate and glutamate sensors in the presence of 0.5 mM PMS⁺, were 14 and 50 nA mmol^-1 for D,L-lactate and L-glutamate, respectively. The calibration curves were linear for concentrations up to 0.5, 1.5 and 100 mM of glutamate, lactate and ethanol, respectively. The sensitivity of the alcohol and lactate sensors decreased by 50–55% within 60 h and that of the glutamate sensor within 6 h.     

Syntheses and structural transformations of oxorhenium(V) complexes with triazine and imidazole derivatives: mixed ligand complexes with thiocyanate, 8-hydroxyquinoline and 1,10-phenanthroline

Mononuclear oxorhenium(V) complexes [ReO(HL¹ or H₂L²)(PPh₃)(OH₂)Cl]Cl, {H₂L^{1 =} 1-(2-hydroxyphenyl)butane-1,3-dione-3-(5,6-diphenyl-1,2,4-triazine-3-ylhydrazone) and H₃L^{2 =} 1-(2-hydroxyphenyl)butane-1,3-dione-3-(1H-benzimidazol-2-ylhydrazone)}, have been synthesized by ligand exchange with trans-trichloromonooxo-bis(triphenylphosphine) rhenium(V). The reaction of a 1?:?1 mixture of either NH₄SCN, 1,10-phenanthroline (1,10-phen) or 8-hydroxyquinoline (8-OHquin) and H₂L¹ or H₃L², with trans-ReOCl₃(PPh₃)₂ yielded the mononuclear oxorhenium(V) complexes, [ReO(HL¹ or H₂L²)(PPh₃) (SCN)Cl], [ReO(HL¹)(1,10-phen)Cl]Cl, [ReO(H₂L²)(1,10-phen)(OH₂)]Cl₂·H₂O and [ReO(HL¹ or H₂L²) (8-Oquin)Cl]. Thermal studies on these complexes showed structural transformations from mononuclear into binuclear complexes. [Re₂O₃(HL¹ or H₂L²)₂(PPh₃)₂Cl₂], [Re₂O₂(μ-L¹ or L²)₂(SCN)₂] and [Re₂O₃ (H₂L²)₂(1,10-phen)₂]Cl₂, were synthesized pyrolytically in the solid state from the respective precursor rhenium complexes. The structures of all complexes and the corresponding thermal products were elucidated using elemental analyses, conductance, IR and electronic absorption spectra, magnetic moments and ¹H NMR and TG-DSC measurements. The prepared complexes and their thermal products have octahedral configurations. The ligands H₂L¹ or H₃L² behave as monoanionic bidentate or monoanionic tetradentate ligands towards the oxorhenium ions. The antifungal activities of the metal complexes towards Alternaria alternata and Aspergillus niger were tested and showed comparable behavior with well known antibiotics.     

Reaction of 1-substituted 3-aminoquinolinediones with isocyanic and isothiocyanic acid

1-Substituted-3-aminoquinoline-2,4(1H,3H)-diones react with potassium cyanate or potassium thiocyanate in boiling acetic acid to give ureido- or thioureidooxindoles, spiro-oxindoles and dihydroimidazoquinolones. However, if the starting compounds are substituted with a benzyl group at position 3, a C-debenzylation proceeds to give imidazoquinolones. According to a proposed reaction mechanism, a molecular rearrangement of the primarily formed mono-substituted urea or thiourea takes place. All compounds were characterized by ¹H, ¹³C and IR spectroscopy and MS data.     

Anionic polymerization with alkaline-earth counterion. I. Preparation and characterization of dicarbanionic oligostyrylbarium and -strontium in tetrahydrofuran

Dicarbanionic oligostyrylbarium or -strontium, PS⁼Ba⁺⁺ and PS⁼Sr⁺⁺, were prepared by reacting styrene with finely divided barium or strontium in THF or THP. The effects of reaction temperature, monomer, and metal concentration were described. Difunctionality of these living oligomers is confirmed from calculated and observed molecular weight data and also from conductivity measurements. λ_max of carbanions is found to vary with DP . At 25°C it decreases from 368 nm for dimers to 359 nm for DP > 10. As observed for monocarbanionic polystyrylbarium (PS^?)₂Ba⁺⁺, λ_max of PS⁼Ba⁺⁺ of high DP decreases with temperature, while λ_max of PS⁼Ba⁺⁺ of low DP increases with decreasing temperature. At ?100°C the difference between the two extreme values is about 30 nm. Similar results are obtained with PS⁼Sr⁺⁺. Such unusual spectral properties are interpreted, on the basis of excitation molecular theory, in terms of ring structures for the living oligomers.     

Triphenylphosphine-Functionalized Core-Cross-Linked Micelles and Nanogels with a Polycationic Outer Shell: Synthesis and Application in Rhodium-Catalyzed Biphasic Hydrogenations

Unimolecular amphiphilic nanoreactors with a poly(4-vinyl-N-methylpyridinium iodide) (P4VPMe⁺I⁻) polycationic outer shell and two different architectures (core-cross-linked micelles, CCM, and nanogels, NG), with narrow size distributions around 130–150 nm in diameter, were synthesized by RAFT polymerization from an R₀-4VPMe⁺I⁻₁₄₀-b-S₅₀-SC(S)SPr macroRAFT agent by either chain extension with a long (300 monomer units) hydrophobic polystyrene-based block followed by cross-linking with diethylene glycol dimethacrylate (DEGDMA) for the CCM particles, or by simultaneous chain extension and cross-linking for the NG particles. A core-anchored triphenylphosphine (TPP) ligand functionality was introduced by using 4-diphenylphosphinostyrene (DPPS) as a comonomer (5–20 % mol mol⁻¹) in the chain extension (for CCM) or chain extension/cross-linking (for NG) step. The products were directly obtained as stable colloidal dispersions in water (latexes). After loading with [RhCl(COD)]₂ to yield [RhCl(COD)(TPP@CCM)] or [RhCl(COD)(TPP@NG)], respectively, the polymers were used as polymeric nanoreactors in Rh-catalyzed aqueous biphasic hydrogenation of the model substrates styrene and 1-octene, either neat (for styrene) or in an organic solvent (toluene or 1-nonanol). All hydrogenations were rapid (TOF up to 300 h⁻¹) at 25 °C and 20 bar of H₂ pressure, the biphasic mixture rapidly decanted at the end of the reaction (<2 min), the Rh loss was negligible (<0.1 ppm in the recovered organic phase), and the catalyst phase could be recycled 10 times without significant loss of catalytic activity.     

Complexation of citric and tartaric acids with Na and K ions in aqueous solution

The formation of MTar^–, MCit^2– and M₂Cit^– complexes (M is Na⁺ or K⁺) was established in reactions of aqueous solutions of citric and tartaric acids with sodium or potassium chloride solutions; their stability constants were determined by potentiometric titration in aqueous solution at 298.15 K and ionic strength 0.1 and 0.3 mol/l with tetraethylammonium chloride (TEACl) as a supporting electrolyte. Heat effects of reactions between citric acid solutions and sodium or potassium chlorides were measured by calorimetric method at 288.15, 298.15, and 308.15 K and at the ionic strength 0.1, 0.2, and 0.3 M TEACl. The increasing ionic strength was found to decrease exothermic effect of complex formation processes, while the temperature produced the opposite effect. Extrapolation to zero ionic strength was used to find thermodynamic stability constants and standard heat effects of complex formation reactions in solutions of oxyacids. The changes in entropy and heat capacity were calculated as well as standard enthalpies of formation of Na and K complexes of the indicated oxyacids in aqueous solution at 298.15 K.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 4, 2005, pp. 253–261.Original Russian Text Copyright © 2005 by Zelenina, Zelenin.     

Synthesis of hyperbranched polymethylvinylborosiloxanes and modification of addition‐curable silicone with improved thermal stability

This paper reports a non‐catalyzed environmentally friendly method of synthesizing hyperbranched polymethylvinylborosiloxanes (PMVBSs) and their use to improve the thermal stability of normal addition‐curable silicones (ACSs). PMVBSs were synthesized by the direct polycondensation of dimethoxymethylvinylsilane with boric acid at 80–130°C in 1,4‐dioxane or diglyme. They were characterized by gel permeation chromatography; FT‐IR; ¹H, ¹³C, ²⁹Si and ¹¹B NMR; and TGA. PMVBSs were composed of Si―O―Si and Si―O―B bridges with some unreacted B―OH groups remaining, and had a ceramic yield up to 65.97% at 900°C. PMVBS‐modified ACSs (PBS‐ACSs) were prepared by curing the PMVBSs with hydrogen‐containing silicone oil under Karstedt (platinum divinyltetramethyldisiloxane) catalysis. Thermal stability of PBS‐ACSs was characterized by TGA in N₂ or air, and ceramic yields as high as 76.7% were obtained. Gas decomposition during the ceramization of PBS‐ACSs was examined by TG/mass spectroscopy. The SiBOC ceramics formed were characterized by FT‐IR, Raman, ²⁹Si and ¹¹B magic angle spinning NMR and elemental analysis. This method provides a valuable way to improve the thermal stability of ACSs. Copyright © 2013 John Wiley & Sons, Ltd.     

Reactions of Electron-Rich Olefins with Proton-Active Compounds

Abstract: From the reaction of electron-rich olefins, bis(1,3-dimethylbenzimidazolidine-2-ylidene), I, or bis(3-methylbenzothiazolidine-2-ylidene), II with proton active compounds, such as dimethyl phosphite, diethyl phosphite, acetonitrile and benzaldehyde were obtained 2-substituted benzimidazole or benzothiazole derivatives. The compounds synthesized were identified by ¹H, ¹³ C, ³¹P-NMR, mass, FT-IR spectroscopic techniques and micro analysis.     

Determination of Inorganic and Organic Thiophosphates with Ion-Selective Membrane Electrodes

Abstract

The conditions for the determination of sodium thiophosphate and sodium S-(2-amino-ethyl)-thiophos-phate in the presence of phosphate ion using ion-selective membrane electrodes are described. Both thiophosphates (inorganic and organic) are hydrolyzed in acidic medium. The phosphate ion is determined with Pb(II) using a Pb²⁺ – selective membrane electrode.

Cysteamine is determined by potentiometric titration with Hg(I1) using a Ag⁺/S^2? – crystal membrane electrode or by direct potentiometry with a Cu²⁺ selective membrane electrode. The results were verified by the iodination method.     

含有酯基二茂铁亚胺环钯化合物催化Suzuki和Heck反应

合成并表征了系列含有酯基二茂铁亚胺环钯化合物.结果表明,该系列环钯催化剂在纯水或有机溶剂中均能高效催化Heck和Suzuki偶联反应.     

Synthesis and characterization of oligocyclosiloxanes via the hydrosilation of vinylsilanes and vinylsiloxanes with heptamethylcyclotetrasiloxane

The preparation of oligocyclosiloxanes via hydrosilation reactions has been investigated. Hydrosilation reactions employing heptamethylcyclotetrasiloxane and vinyl-containing silanes and siloxanes yielded a variety of oligocyclosiloxanes with various numbers of cyclosiloxane rings connected through tri-, tetra-, penta-, hexa-, hepta-, or octafunctional junctions. The oligocyclosiloxanes were characterized by gas chromatography, IR spectroscopy, ²⁹Si-, ¹H-, and ¹³C-NMR spectroscopy, elemental analysis, and vapor phase osmometry. The polycyclics were redistributed with hexamethyldisiloxane and the resulting fragments analyzed by gas chromatography. All results were consistent with the formation of isomeric oligocyclosiloxanes due to a lack of absolute regioselectivity of the hydrosilation reaction. © 1993 John Wiley & Sons, Inc.     

Voltammetry and EQCM Investigation of Glutathione Monolayer and Its Complexation with Cu2+

The glutathione (GSH) self‐assembled monolayer and its compexlation with Cu²⁺ were studied by using voltammetry and EQCM. It was found that the monolayer could rearrange during the redox process of Cu²⁺/Cu⁺. The protonating, or not, of the carboxyl terminates of the adsorpted GSH molecules influence the compexlation interaction significantly for they are the key binding sites. The GSH monolayer had the capacity to accumulate Cu²⁺ and the monolayer modified gold electrode was employed to detect the low levels of Cu²⁺ with a limit of 1.0×10^?10 mol L^?1.     

New nonstoichiometric molybdate,tungstate, and vanadate catalysts with the scheelite-type structure

Phases of the formula A_1?xфxMO₄ with the scheelite-type structure are described where ф represents a vacancy at the A cation site and M is Mo⁶⁺, W⁶⁺, and/or V⁵⁺. Many different univalent, divalent, and trivalent A cations were used in this study. The phases with no defects, i.e., x = 0, were known except for those of the type A¹⁺_.5A³⁺_.5MO₄ where A¹⁺ is Ag or Tl and M is Mo⁶⁺ or W⁶⁺. Phases with x > 0 are generally new and were prepared for catalytic studies. An excellent correlation between catalytic properties and defect concentration has been observed.     

Gamma-ray irradiation and characterization of synthesized bidentate and tetradentate Schiff base ligands and their complexes with some transition metal ions

Salen ligands are essential for coordinating a diverse group of metals in their respective oxidation states. This creates significant complexes of salen metals that are used in different fields. Condensation of ehylenediamine (en) with p-methoxybenzaldehyde (L¹) or o-hydroxyacetophenone (L²) with a ratio 1: 2 (en: p-methoxybenzaldehyde or o-hydroxyacetophenone) or by the interaction of o-phenylenediamine (phen) with o-hydroxybenzaldehyde (L³) or p-hydroxybenzaldehyde (L⁴) with a ratio 1: 2 (phen: o-hydroxybenzaldehyde or p-hydroxybenzaldehyde) has been used to prepare four symmetrical Schiff bases (L¹-L⁴). The UV–vis spectroscopy has been used to investigate the diverse electronic transitions associated with the Schiff bases molecules as well as how these transitions are impacted by diverse polarities of solvents. Elemental analysis, FT-IR, UV–vis spectra, molar conductivity, and ¹H NMR have been used to characterise all the compounds obtained in this process. The continuous variation applied alongside molar ratio spectral methods showed the formation of different complexes arising from the reaction of the ligand (L^1-L⁴) with the metal ions Mn(II), Fe(III) and Cu(II) is 1: 1 and/ or 1: 2 (M: L). A series of universal buffer solutions (20 % ethanol v/v) with varying pH values were used in spectrophotometry to determine the acid dissociation constants of the L² and L⁴ ligands. Gamma radiation was applied to examine the compounds’ irradiation stability. Additionally, the absorptions of the main functional groups were screened using FT-IR spectra before and after Gamma irradiation. The results show that all the compounds are stable after irradiation process; therefore, it could be used as enhancing agents in cancer therapy.     

Carbon ion reactions with ethylene and propylene oxide

Branching ratios for the reactions of (²P) ¹²C⁺ and ¹³C⁺ ions with ethylene and propylene oxide were determined using a tandem Dempster-ion cyclotron resonance mass spectrometer. Direct processes involving charge transfer and a deoxidation, or O^? abstraction, are the dominant reaction mechanisms. Extensive dissociation of the products initially formed demonstrates that a substantial fraction of the energy of reaction remains with the ionic product.