{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 Automated analysis of off-line measured gamma-spectra using \scaps UniSampo\scaps0 gamma-ray spectrum analysis software including criterias for alarming systems \par }

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\lang2057\f0\fs24 In many laboratories the number of measured routine gamma-spectra can be significant and the labour work to review all the data is time consuming and expensive task. In many cases the routine sample does not normally contain radiation above a detectable level, and still the review of the spectra has to be performed. By introducing simple rules for emerging conditions, the review work can be significantly reduced. In one case the need to review the environmental measurement spectra was reduced to less than 1% compared to the original need, which in turn made the review personnel available for more useful functions. Using the \scaps UniSampo\scaps0 analysis system, the analysis results of spectra that are causing alarming conditions can be transmitted via e-mail to any address. Some systems are even equipped with the capability to forward these results to hand-portable telephones or pagers. This is a very practical solution for automated environmental monitoring, when the sample spectra are collected automatically and transmitted to central computer for further analysis. The paper describes how to set up an automatic analysis system, rules for the emerging conditions, technical solutions for an automated alarming system and a generic hypothesis test for the alarming system developed for \scaps UniSampo\scaps0 analysis software. \par }     

{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 Neutron activation analysis using Excel files and Canberra Genie-2000 \par }

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 We have developed a method for analyzing neutron activated sample data by using Microsoft Excel as the analysis engine. A simple technique for inputting data is based on report files generated by Canberra’s Genie-2000 spectroscopy system but could be easily modified to support other vendors having report formats with consistent text placement. A batch program handles operating an automatic sample changer, acquiring the data, and analyzing the spectrum to create a report of the peak locations and net area. The entire report is then transferred to within an Excel spreadsheet as the source data for neutron activation analysis. Unique Excel templates have been designed, for example, to accommodate short-lived and long-lived isotopes. This process provides us with a largely integrated solution to NAA while providing the results in an industry standard spreadsheet format. This software is ideally suited for teaching and training purposes. \par }     

{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 Efficiency of germanium detectors as a function of energy and incident geometry: Comparison of measurements and calculations \par }

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 The use of HPGe detectors in counting situations where the sample is not easily reproduced has increased the use of models to determine the counting efficiency for the specific geometry. The accuracy of these simulations of the germanium detector response relies on detailed knowledge of the performance of the detector. Several different types of detectors were measured at different energies using a pencil beam of gamma-rays. These measurements showed that the dead layer was not uniform from detector to detector. This and the construction details were used to calculate the efficiency for several detectors. \par }     

Excess molar heat capacities of ((<Emphasis Type="Italic">R</Emphasis>)-(+)-α-pinene+(<Emphasis Type="Italic">S</Emphasis>)-(-)- α-pinene) at temperatures between 293.15-308.15 K

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 New explanations are given for two types of irregular thermogravimetric (TG) data. A TG relationship between mass and temperature is derived on the basis of migration behavior of bubbles generated in bulk of sample system, and superposed on that derived on the basis of kinetics of the 4\super th\nosupersub order event, which is superposed on the experimental TG data obtained from three reference papers. This suggests that these TG data are reflecting migration of bubbles. A dependence of TG behavior on heating rate, which is contrary to usual that, is shown and is explained in terms of event-rate determination by boiling. \par }     

{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 Efficiency self-calibration of the HPGe detector for on-line assay of pebble bed reactor fuel \par }

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 Multi-pass pebble bed reactors are loaded with spherical fuel pebbles that are circulated through the core until they reach a proposed burnup limit (~100,000 MWD/MTU). An HPGe detector can be used to assay the fuel on-line to ensure that the burnup limit is not breached. The potential exists for using a relative burnup indicator, which would allow the use of a relative self-calibrating approach for efficiency determination. The utilization of several fission products as built-in on-line relative calibration standards is explored using the computer codes ORIGEN2.1, MCNP4C, and SYNTH to produce simulated gamma-ray spectra of the fuel pebbles at various levels of burnup. \par }     

{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 Calorimetric study of transition phenomena in molecular solids \par }

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs20 Principle and technical development of low temperature calorimetry are described. Typical experimental results obtained by our group at Osaka University over the four decades are given. These include phase transitions in equilibrium crystals and glass transitions in non-equilibrium frozen-in disordered solids including crystals. It can be concluded that the glass transitions observed exclusively in liquids so far are just one example of transitions that must be of wide occurrence in solids arising from freezing of relevant degrees of freedom. Interplay between the phase and glass transitions in crystals is discussed in relation to useful dopant that may accelerate some molecular motions that had failed to maintain equilibrium at low temperatures. \par }     

{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 Status of software for PGNAA bulk analysis by the Monte Carlo - Library Least-Squares (MCLLS) approach \par }

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 The Center for Engineering Applications of Radioisotopes (CEAR) has been working for about ten years on the Monte Carlo - Library Least-Squares (MCLLS) approach for treating the nonlinear inverse analysis problem for PGNAA bulk analysis. This approach consists essentially of using Monte Carlo simulation to generate the libraries of all the elements to be analyzed plus any other required libraries. These libraries are then used in the linear Library Least-Squares (LLS) approach with unknown sample spectra to analyze for all elements in the sample. The other libraries include all sources of background which includes: (1) gamma-rays emitted by the neutron source, (2) prompt gamma-rays produced in the analyzer construction materials, (3) natural gamma-rays from K-40 and the uranium and thorium decay chains, and (4) prompt and decay gamma-rays produced in the NaI detector by neutron activation. A number of unforeseen problems have arisen in pursuing this approach including: (1) the neutron activation of the most common detector (NaI) used in bulk analysis PGNAA systems, (2) the nonlinearity of this detector, and (3) difficulties in obtaining detector response functions for this (and other) detectors. These problems have been addressed by CEAR recently and have either been solved or are almost solved at the present time. We have now finished the development of Monte Carlo simulation for all of the libraries except the prompt gamma-ray library from the activation of the NaI detector. We must first determine a treatment for the coincidence schemes for Na and particularly I to complete the Monte Carlo simulation of this last library. \par }     

Novel beta-gamma coincidence measurements using phoswich detectors

Summary We have developed an analysis pipeline for air filter gamma-ray spectra, utilizing the software packages UniSampo for peak analysis and Shaman for nuclide identification. In an automated usage mode, spectra that are received via e-mail are processed into a directory tree, analyzed with UniSampo and Shaman, and finally categorized on the basis of the analysis results. Alarms are generated if anything out of the ordinary is observed. Typical applications for an air filter analysis pipeline are national radioactivity surveillance networks and the global radionuclide monitoring network being implemented for verification of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Our analysis pipeline system has been used by the Finnish national CTBT-authority, the Finnish National Data Center (FiNDC), since July 1999. Evaluation with a randomly selected set of 1518 air filter spectra showed that our pipeline system produces significantly better analysis results than that utilized by the CTBT Organization (CTBTO): our system found 4.2 more peaks per spectrum than the CTBTO system (9 &percnt; increase) and identified 5.6 more peaks per spectrum (14 &percnt; increase) on the average.     

电感耦合等离子体质谱法测定高纯金中痕量杂质

建立了高纯金中40余种痕量杂质的电感耦合等离子体质谱测定方法。方法检出限为0．0006～0．21μg/L。考察了基体Au的谱干扰及基体效应,采用Cs内标补偿基体对待测信号的抑制作用。方法简单、快速、灵敏、准确。     

Automation of analysis of airborne radionuclides observed in Canadian CTBT radiological monitoring networks using LINSSI

Linux System for Spectral Information (LINSSI¹) is a SQL database and established under Linux. Currently it is compatible with HPGe gammaspectra analysis software UniSampo, Shaman and Aatami. Based on this database and software, an automated analysis pipeline has been setup for Canadian CTBT radiological monitoring networks. This paper has investigated the performance of this pipeline in its capabilities and reliabilities of rapid small peak search, nuclide identification, and radionuclide activity concentration evaluation. Up to now, more than 80 thousand daily monitoring gamma-spectra have been automatically received and processed, the results have been stored in database. The pipeline nuclide detection limits is satisfied for environmental radiation monitoring and nuclear emergency preparedness.     

Recovery of plutonium from aqueous waste solutions using porous zirconia spherical particles

Based on the Linssi database and UniSampo/Shaman software, an automated analysis platform has been setup for the analysis of large amounts of gamma-spectra from the primary coolant monitoring systems of a CANDU reactor. Thus, a database inventory of gaseous and volatile fission products in the primary coolant of a CANDU reactor has been established. This database is comprised of 15,000 spectra of radioisotope analysis records. Records from the database inventory were retrieved by a specifically designed data-mining module and subjected to further analysis. Results from the analysis were subsequently used to identify the reactor coolant half-life of ¹³⁵Xe and ¹³³Xe, as well as the correlations of ¹³⁵Xe and ⁸⁸Kr activities.     

Analysis of mechanical behavior in cold-drawing deformation of polymers

When stretched under uniaxial stress, ductile polymers usually exhibit unstable plastic deformation, which embodies two phases: (a) yielding with the formation of a neck and (b) cold-drawing with the propagation of necking shoulders. The mechanical state associated with this deformation behavior is analyzed. The discussion is divided into three parts. The first part is a general treatment of the constitutive function of flow stress in the plastic state, in which a series of relations among various characterizing parameters are formulated. The second part provides three mechanical criteria for necking deformation and propagation of necking shoulders: the condition of unstable plastic deformation requiring $ D_P = - \left( {\partial {{\ln \dot \varepsilon } \mathord{\left/ {\vphantom {{\ln \dot \varepsilon } {\partial \varepsilon }}} \right. \kern-\nulldelimiterspace} {\partial \varepsilon }}} \right)_P < 0 $ the stabilizing deformation mode, which requires $ \gamma _p = \left( {{{dD_p } \mathord{\left/ {\vphantom {{dD_p } {d\varepsilon }}} \right. \kern-\nulldelimiterspace} {d\varepsilon }}} \right)_P > 0 $ and the obvious localization of unstable plastic deformation. The third part describes a mathematical model which can be used in calculations to fit the contour of the necking shoulder. This model is developed according to rational considerations for the relation of In $ \dot \varepsilon $ to ε. Experimental data on PE rod specimens are well fitted by this model. © 1993 John Wiley & Sons, Inc.     

一种液晶环氧树脂固化中扩散控制动力学研究

根据扩散控制反应的基本原理 ,建立了合适的反应模型 ,描述了 4 ,4′ 二 ( 2 ,3 环氧丙氧基 )偶氮苯(DGEAP) / 4,4′ 二氨基二苯甲烷 (DDM)环氧树脂的固化行为 .该模型认为 ,随着环氧基团反应程度的提高 ,基团的反应半径将受到影响 .当体系中出现了介晶基元的有序排列时 ,与之相连的反应基团的分布也受到影响 ,有序区内的局部浓度将变大 ,产生假浓度效应 ,并最终影响扩散控制反应动力学 .通过与普通环氧树脂固化动力学的比较 ,证实了这一效应 .     

Structures and relative energies of gas-phase [C2H7N]+˙ radical cations

Ab initio molecular orbital calculations with split-valence plus polarization basis sets and incorporating electron correlation and zero-point energy corrections have been used to examine possible equilibrium structures on the [C₂H₇N]⁺˙ surface. In addition to the radical cations of ethylamine and dimethylamine, three other isomers were found which have comparable energy, but which have no stable neutral counterparts. These are \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^{\rm .} {\rm H}_{\rm 2} {\rm CH}_{\rm 2} \mathop {\rm N}\limits^{\rm + } {\rm H}_{\rm 3} $\end{document}, \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} \mathop {\rm C}\limits^{\rm .} {\rm H}\mathop {\rm N}\limits^{\rm + } {\rm H}_{\rm 3} $\end{document}and\documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} \mathop {\rm N}\limits^{\rm + } {\rm H}_{\rm 2} \mathop {\rm C}\limits^. {\rm H}_{\rm 2} {\rm }, $\end{document} with calculated energies relative to the ethylamine radical cation of ?33, ?28 and 4 kJ mol^?1, respectively. Substantial barriers for rearrangement among the various isomers and significant binding energies with respect to possible fragmentation products are found. The predictions for \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {\rm C}\limits^. {\rm H}_{\rm 2} {\rm CH}_{\rm 2} \mathop {\rm N}\limits^ + {\rm H}_{\rm 3} $\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} \mathop {\rm C}\limits^{\rm .} {\rm H}\mathop {\rm N}\limits^{\rm + } {\rm H}_{\rm 3}$\end{document} are consistent with their recent observation in the gas phase. The remaining isomer, \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm CH}_{\rm 3} \mathop {\rm N}\limits^{\rm + } {\rm H}_{\rm 2} \mathop {\rm C}\limits^{\rm .} {\rm H}_{\rm 2} {\rm },$\end{document}is also predicted to be experimentally observable.     

The formation of the styryl ion in the mass spectra of cinnamyl compounds

The formation of the styryl ion \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm PhCH = }\mathop {\rm C}\limits^{\rm + } {\rm H} $\end{document} in the mass spectra of some cinnamic compounds is shown to occur via the intermediate formation of the cinnamoyl ion \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm Ph} - {\rm CH} = {\rm CH} - {\rm C} \equiv \mathop {\rm O}\limits^{\rm + } $\end{document} rather than by direct cleavage of the bond α to the double bond.     

Thermodynamic properties of the ternary oxides in the Eu–Ru–O system by using solid-state electrochemical cells

The Gibbs free energies of formation of Eu₃RuO₇(s) and Eu₂Ru₂O₇(s) have been determined using solid-state electrochemical technique employing oxide ion conducting electrolyte. The reversible electromotive force (e.m.f.) of the following solid-state electrochemical cells have been measured:

System Zn–Rh–O: heat capacity and Gibbs free energy of formation using differential scanning calorimeter and electrochemical cell

The standard molar Gibbs free energy of formation of ZnRh₂O₄(s) has been determined using an oxide solid-state electrochemical cell wherein calcia-stabilized zirconia (CSZ) was used as an electrolyte. The oxide cell can be represented by: . The electromotive force was measured in the temperature range from 943.9 to 1,114.2 K. The standard molar Gibbs energy of formation of ZnRh₂O₄(s) from elements in their standard state using the oxide electrochemical cell has been calculated and can be represented by: . Standard molar heat capacity C ^o _p,m(T) of ZnRh₂O₄(s) was measured using a heat flux-type differential scanning calorimeter in two different temperature ranges, from 127 to 299 and 307 to 845 K. The heat capacity in the higher temperature range was fitted into a polynomial expression and can be represented by: . The heat capacity of ZnRh₂O₄(s), was used along with the data obtained from the oxide electrochemical cell to calculate the standard enthalpy and entropy of formation of the compound at 298.15 K.     

The Radical Anion of 1,2-Diphenylcyclopentene

ESR. and ENDOR. studies are reported for the radical anions of 1,2-diphenylcyclopentene ( 3 ) and its di(pe+deuteriophenyl)-derivative (3-D₁₀). Comparison of the coupling constants of the phenyl protons in 3 \documentclass{article}\pagestyle{empty}\begin{document}$ ^{\ominus \atop \dot{}} $\end{document}. with the analogous values for the radical anions of 1,2-diphenyl substituted cyclopropene ( 1 ) and cyclobutene ( 2 ) reveals regular changes in the sequence 1 \documentclass{article}\pagestyle{empty}\begin{document}$ ^{\ominus \atop \dot{}} $\end{document}, 2 \documentclass{article}\pagestyle{empty}\begin{document}$ ^{\ominus \atop \dot{}} $\end{document}, 3 \documentclass{article}\pagestyle{empty}\begin{document}$ ^{\ominus \atop \dot{}} $\end{document}, which are caused by an increasing twist of the phenyl groups about the C(1), C(1′)- and C(2), C(1″)-bonds linking them to the ethylene fragment. Such a twist is shown to be also responsible for the large difference in the coupling constants of the methylene β-protons in 3 \documentclass{article}\pagestyle{empty}\begin{document}$ ^{\ominus \atop \dot{}} $\end{document}. (0.659 and 0.293 mT). It is suggested that - in order to minimize the losses caused by this twist in the π-delocalization energy - the 2 p_z-axes at the centres 1 and 2 deviate from a perpendicular orientation to the mean plane of the cyclopentene ring. A deviation by 19° from such an orientation is required to account for the observed β-proton coupling constants in terms of their conventional cos²-dependence on the dihedral angles θ.     

聚乳酸的研究进展

本文对聚乳酸的合成、性能、共聚改性等方面的研究进展做了综述, 并讨论了聚乳酸类材料的应用现状和前景。     

Thermodynamic studies on Pr2TeO6

The standard Gibbs energy of formation of Pr₂TeO₆ $ (\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)) $ was derived from its vapour pressure in the temperature range of 1,400–1,480 K. The vapour pressure of TeO₂ (g) was measured by employing a thermogravimetry-based transpiration method. The temperature dependence of the vapour pressure of TeO₂ over the mixture Pr₂TeO₆ (s) + Pr₂O₃ (s) generated by the incongruent vapourization reaction, Pr₂TeO₆ (s) = Pr₂O₃ (s) + TeO₂ (g) + ½ O₂ (g) could be represented as: $ { \log }\left\{ {{{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} \mathord{\left/ {\vphantom {{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} {{\text{Pa}} \pm 0.0 4}}} \right. \kern-0em} {{\text{Pa}} \pm 0.0 4}}} \right\} = 19. 12- 27132\; \left({\rm{{{\text{K}}}}/T} \right) $ . The $ \Updelta_{\text{f}} G^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ could be represented by the relation $ \left\{ {{{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} \mathord{\left/ {\vphantom {{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} \pm 5.0} \right\} = - 2 4 1 5. 1+ 0. 5 7 9 3\;\left(T/{\text{K}}\right) .$ Enthalpy increments of Pr₂TeO₆ were measured by drop calorimetry in the temperature range of 573–1,273 K and heat capacity, entropy and Gibbs energy functions were derived. The $ \Updelta_{\text{f}} H_{{298\;{\text{K}}}}^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ was found to be $ {{ - 2, 40 7. 8 \pm 2.0} \mathord{\left/ {\vphantom {{ - 2, 40 7. 8 \pm 2.0} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} $ .