Synthesis, characterisation and catalytic activities of manganese(III) complexes of pyridoxal-based ONNO donor tetradenatate ligands

Reaction of Mn^II(CH₃COO)₂ with dibasic tetradentate ligands, N,N′-ethylenebis(pyridoxylideneiminato) (H₂pydx-en, I), N,N′-propylenebis(pyridoxylideneiminato) (H₂pydx-1,3-pn, II) and 1-methyl-N,N′-ethylenebis(pyridoxylideneiminato) (H₂pydx-1,2-pn, III) followed by aerial oxidation in the presence of LiCl gives complexes [Mn^III(pydx-en)Cl(H₂O)] (1) [Mn^III(pydx-1,3-pn)Cl(CH₃OH)] (2) and [Mn^III(pydx-1,2-pn)Cl(H₂O)] (3), respectively. Crystal and molecular structures of [Mn(pydx-en)Cl(H₂O)] (1) and [Mn(pydx-1,3-pn)Cl(CH₃OH)] (2) confirm their octahedral geometry and the coordination of ligands through ONNO(2-) form. Reaction of manganese(II)-exchanged zeolite-Y with these ligands in refluxing methanol followed by aerial oxidation in the presence of NaCl leads to the formation of the corresponding zeolite-Y encapsulated complexes, abbreviated herein as [Mn^III(pydx-en)]-Y (4), [Mn^III(pydx-1,3-pn)]-Y (5) and [Mn^III(pydx-1,2-pn)]-Y (6). These encapsulated complexes are used as catalysts for the oxidation, by H₂O₂, of methyl phenyl sulfide, styrene and benzoin efficiently. Oxidation of methyl phenyl sulfide under the optimized reaction conditions gave ca. 86% conversion with two major products methyl phenyl sulfoxide and methyl phenyl sulfone in the ca. 70% and 30% selectivity, respectively. Oxidation of styrene catalyzed by these complexes gave at least five products namely styrene oxide, benzaldehyde, benzoic acid, 1-phenylethane-1,2-diol and phenylacetaldehyde with a maximum of 76.9% conversion of styrene by 4, 76.3% by 5 and 76.0% by 6 under optimized conditions. The selectivity of the obtained products followed the order: benzaldehyde > benzoic acid > styrene oxide > phenylacetaldehyde > 1-phenylethane-1,2-diol. Similarly, ca. 93% conversion of benzoin was obtained by these catalysts, where the selectivity of the products followed the order benzil > benzoic acid > benzaldehyde-dimethylacetal. Tests for the recyclability and heterogeneity of the reactions have also been carried. Neat complexes are equally active. However, the recycle ability of encapsulated complexes makes them better over neat ones.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

A contribution to 1-azapentadienylmetal chemistry: Si, Sn(II), Fe(II) and Co(II) complexes

Complexes of three related 1-azapentadienyl ligands [N(SiMe₂R¹)C(Bu^t)(CH)₃SiMe₂R]⁻, abbreviated as L (R = Bu^t, R¹ = Me), L′ (R = Me = R¹), and L″ (R = Bu^t = R¹), are described. The crystalline compounds Sn(L)₂ (1), Sn(L′)₂ (2), [Sn(L′)(μ-Cl)]₂ (3) and [Sn(L″)(μ-Cl)]₂ (4) were prepared from SnCl₂ and 2 K(L), 2 K(L′), K(L′) and K(L″), respectively, in thf. Treatment of the appropriate lithium 1-azapentadienyl with Si(Cl)Me₃ yielded the yellow crystalline Me₃Si(L) (5) and the volatile liquid Me₃Si(L′) (6) and Me₃Si(L″) (7), each being an N,N,C-trisilyldieneamine. The red, crystalline Fe(L)₂ (8) and Co(L′)₂ (9) were obtained from thf solutions of FeCl₂ with 2 Li(L)(tmeda) and CoCl₂ with 2 K(L′), respectively. Each of 1-9 gave satisfactory C, H, N analyses; 6 and 7 (GC-MS) and 1, 2, 8 and 9 (MS) showed molecular cations and appropriate fragments (also 3 and 4). The ¹H, ¹³C and ¹¹⁹Sn NMR (1-4) and IR spectra support the assignment of 1-4 as containing Sn-N(SiMe₂R¹)-C(Bu^t)(CH)₃SiMe₂R moieties and 5-7 as N(SiMe₃)(SiMe₂R¹)C(Bu^t)(CH)₃SiMe₂R molecules; for 1-4 this is confirmed by their X-ray structures. The magnetic moments for 8 (5.56 μ_B) and 9 (2.75 μ_B) are remarkably close to the appropriate Fe and Co complex [M{η³-N(SiMe₃)C(Bu^t)C(H)SiMe₃}₂]; hence it is proposed that 8 and 9 have similar metal-centred, centrosymmetric, distorted octahedral structures.     

Dinuclear copper(II) perchlorate complexes with 6-(benzylamino)purine derivatives: Synthesis,X-ray structure,magnetism and antiradical activity

The reactions of Cu(ClO₄)₂·6H₂O with 6-(benzylamino)purine derivatives in a stoichiometric 1:2 metal-to-ligand ratio led to the formation of penta-coordinated dinuclear complexes of the formula [Cu₂(μ-L^1–8)₄(ClO₄)₂](ClO₄)₂·nsolv, where L¹ = 6-(2-fluorobenzylamino)purine (complex 1), L² = 6-(3-fluorobenzylamino)purine (2), L³ = 6-(4-fluorobenzylamino)purine (3), L⁴ = 6-(2-chlorobenzylamino)purine (4), L⁵ = 6-(3-chlorobenzylamino)purine (5), L⁶ = 6-(4-chlorobenzylamino)purine (6), L⁷ = 6-(3-methoxybenzylamino)purine (7) and L⁸ = 6-(4-methoxybenzylamino)purine (8); n = 0–4 and solv = H₂O, EtOH or MeOH. All the complexes have been fully characterized by elemental analysis, FTIR, UV–Vis and EPR spectroscopy, and by magnetic and conductivity measurements. Variable temperature (80–300 K) magnetic susceptibility data of 1–8 showed the presence of a strong antiferromagnetic exchange interaction between two Cu(II) (S = 1/2) atoms with J ranging from −150.0(1) to −160.3(2) cm⁻¹. The compound 6·4EtOH·H₂O was structurally characterized by single crystal X-ray analysis. The Cu?Cu separation has been found to be 2.9092(8) Å. The antiradical activity of the prepared compounds was tested by in vitro SOD-mimic assay with IC₅₀ in the range 8.67–41.45 μM. The results of an in vivo antidiabetic activity assay were inconclusive and the glycaemia in pre-treated animals did not differ significantly from the positive control.     

Double O,C,O-chelated diorganotin(IV) derivatives

Novel diorganotin(IV) compounds (L^1,2)₂SnCl₂, where L^1,2 are O,C,O-chelating ligands (called the pincer ligands), 2,6-bis(alkoxymethyl)phenyl-, , (L¹, R = Me, L², R = t-Bu), have been synthesized and characterized by ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy, MS-ESI spectrometry and elemental analysis. The structure of both compounds (L¹)₂SnCl₂ (1) and (L²)₂SnCl₂ (2) was determined by X-ray crystallography. Determination of crystal structures reveals different shapes of coordination polyhedra. While deformed octahedron was found for 1, tetrahedral geometry of the tin atom was determined for 2. The NMR spectroscopy indicates a similar structural arrangement of 1 and 2 in solution. The reaction of 1 with silver salts of low nucleophilic anions X⁻ (X = OTf and 1-CB₁₁H₁₂) resulted in (L¹)₂SnCl(OTf) (3), (L¹)₂Sn(OTf)₂ (4), and (L¹)₂SnCl(CB₁₁H₁₂) (5). The compounds 4 and 5 are of ionic nature both in solid state and in solution of CH₃CN.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Syntheses, crystal structures, and characterization of As(III) and As(V) thioarsenates, [Mn2(phen)(As2S5)]n and [Mn3(phen)3(AsS4)2]n·nH2O

The hydrothermal reactions of As, Mn, S, phen (phen=1,10-phenanthroline), and en (en=ethylenediamine) yield two manganese As(III) and As(V) thioarsenates, [Mn₂(phen)(As^III₂S₅)]_n (1) and [Mn₃(phen)₃(As^VS₄)₂]_n·nH₂O (2), respectively. Single-crystal X-ray diffraction analyses reveal that compound 1 is a two-dimensional (2D) layer of (6,3) topology. The 18-membered rings within the 2D porous layers are formed by corner-, edge-, and face-sharing cubane-like [Mn₂As₂S₄] units along the [100] direction. Whereas compound 2 is a one-dimensional (1D) chain structure. They are both characterized by IR, elemental analysis, EDS, and X-ray powder diffraction. The thermogravimetric analysis of 1 and 2 are discussed. Both the compounds are semiconductors with the band gap of E_g (compound 1)=2.01 eV (617 nm) and E_g (compound 2)=1.97 eV (629 nm), respectively. In addition, the variable-temperature magnetic susceptibility data suggest weak antiferromagnetic interactions between the Mn²⁺ ions in these two compounds.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Infinite chains constructed from flexible bis(benzimidazole)-based ligands

Two neutral ligands, L¹ · 2H₂O and L² · H₂O, and seven complexes, [Cu(pmb)₂(L¹)] (1), [Cu(pmb)₂(L²)] (2), [Cu(Ac)₂(L²)] · 4H₂O (3), [Cu(4-aba)₂(L²)] (4), [Ag(4-ts)(L¹)(H₂O)] (5), [Ag₂(epes)₂(L¹)] · 2H₂O (6), [Ag(1,5-nds)_0.5(L²)] · 0.5C₂H₅OH · H₂O (7) [where L¹ = 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole); L² = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole), pmb = p-methoxybenzoate anion; Ac = acetate anion; 4-aba = 4-aminobenzoate anion; 4-ts = p-toluenesulfonate anion; epes = N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonate) anion; 1,5-nds = 1,5-naphthalenedisulfonate anion], have been synthesized and characterized by elemental analysis, IR, and single-crystal X-ray diffraction. The L¹ and L² ligands in compounds 1–7 act as bridging ligands, linking metal ions into chain structures. The chains in compounds 3, 4 and 6 interlace with each other by hydrogen bonds to generate 3D supramolecular structures. In compound 5, π–π interactions between adjacent L¹ ligands hold the chains to a supramolecular layer. In compound 7, the sulfonate anions act as counterions in the framework. The thermal stabilities of 3, 6 and 7, and the luminescent properties for 5–7 in the solid states are also discussed.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Schiff bases of 1′-hydroxy-2′-acetonaphthone containing chalcogen functionalities and their complexes with and (p-cymene)Ru(II), Pd(II), Pt(II) and Hg(II): Synthesis, structures and applications in C-C coupling reactions

Schiff bases of 1′-hydroxy-2′-acetonaphthone (HAN) containing chalcogen functionalities, 1-HO-C₁₀H₆-2-CH₃)CN-(CH₂)_nEC₆H₄-4-R (R = H or OMe; n = 2 or 3; E = S (L¹-L²), Se (L³-L⁴) or Te (L⁵-L⁶)) have been synthesized in yield 90-95%. They show characteristic ¹H, ¹³C{¹H} ⁷⁷Se{¹H} and ¹²⁵Te{¹H} (in case of selenated and tellurated species, respectively) NMR spectra. Their complexation with Pd(II), Pt(II), Hg(II) and (p-cymene)Ru(II) has been explored. The single-crystal structures of ligands L¹, L³ and L⁶ and complexes of Pd(II) with L¹, L², L³ and L⁵ have been determined. The geometry of Pd is close to square planar in all the complexes and the ligands coordinate in a uni-negative tridentate mode. The Pd-N bond lengths are in the range 1.996(7)-2.019(5) ?. The Pd-Se bond distance is 2.3600(5) ? whereas Pd-Te is 2.5025(7) ?. The Pd(II) complexes of L¹-L⁵ have been found promising as homogeneous catalyst for Heck and Suzuki reactions. The yields obtained were up to 85%.     

New N-pyrazole, P-phosphinite hybrid ligands and corresponding Rh(I) complexes: X-ray crystal structures of complexes with [Rh, N, P-phosphinite, Cl, (CO)] core

Two new N-pyrazole, P-phosphinite hybrid ligands 3-(3,5-dimethyl-1H-pyrazol-1-yl)propyldiphenylphosphinite (L³) and 2-(3,5-diphenyl-1H-pyrazol-1-yl)ethyldiphenylphosphinite (L⁴) are presented. The reactivity of these ligands and two other ligands reported in the literature (3,5-dimethyl-1H-pyrazol-1-yl)methyldiphenylphosphinite (L¹) and 2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyldiphenylphosphinite (L²) towards [RhCl(CO)₂]₂ (1) have been studied and complexes [RhCl(CO)L] (L = L² (2), L³ (3) and L⁴ (4)) have been obtained. For L¹ only decomposition products have been achieved. All complexes were fully characterised by analytical and spectroscopic methods and the resolution of the crystalline structure of complexes 2 and 3 by single-crystal X-ray diffraction are also presented. In these complexes, the ligands are coordinated via κ²(N,P) to Rh(I), forming metallocycles of seven (2 and 4) or eight (3) members and finish its coordination with a carbonyl monoxide and a trans-chlorine to phosphorus atom. In both complexes, weak intermolecular interactions are present. NMR studies of complexes 2-4 show the chain N-(CH₂)_x-O becomes rigid and the protons diastereotopic.     

Synthesis and electrochemical properties of bis(bipyridine)ruthenium(II) complexes bearing pyridinyl- and pyridinylidene ligands induced by cyclometalation of N′-methylated bipyridinium analogs

Ruthenium complexes with bipyridine-analogous quaternized (N,C) bidentate ligands [RuL(bpy)₂](PF₆)₂ (bpy = 2,2′-bipyridine, (1), L = L¹ = N′-methyl-2,4′-bipyridinium; (2), L = L² = N′-methyl-2,3′-bipyridinium) were synthesized and characterized. The structure of complex 2 was determined by the X-ray structure analysis. The ¹³C{¹H} NMR spectroscopic and cyclic voltammetric studies indicate that the coordination modes of these ligands are quite different, that is, the C-coordinated rings of (N,C)-ligands in 1 and 2 are linked to ruthenium(II) with a pyridinium manner and a pyridinylidene one, respectively. The ligand-localized redox potentials of 1 and 2 also revealed the substantial difference in the electron donating ability of both ligands.     

Syntheses, structures and catalytic activity of copper(II) complexes bearing N,O-chelate ligands

Copper complexes [Cu(Lⁿ)₂] 1-4 bearing N,O-chelating β-ketoamine ligands Lⁿ based on condensation products of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone with aniline (L¹), α-naphthylamine (L²), o-methylaniline (L³), and p-nitroaniline (L⁴), respectively, were synthesized and characterized by IR, ¹H NMR and X-ray crystallography (except 2). They were shown to catalyze the vinyl polymerization of norbornene when activated by methylaluminoxane (MAO). Both steric and electronic effects are important and influential factors contributing to the catalytic activity of the complexes with the order of 2 > 4 > 3 > 1.     

Magnetic coupling in EE and EO azido-bridged binuclear copper complexes: Synthesis,structure and magnetic studies

Four azide bridged dinuclear copper(II) complexes, [Cu₂(L^X)₂(N₃)₂](ClO₄)₂, with L^X = substituted N,N-bis[(3,5-dimethylpyrazole-1-yl)-methyl]benzylamine, [X = H (1), OMe (2), Me (3) and Cl (4)] have been synthesized, out of which complexes 1 and 2 have been characterized structurally. In Complex 1 the two bridging azide ligands have connected the two metal centers in an end-on (EO) fashion with aSP (asymmetric Square Pyramidal) geometry and showed an weak antiferromagnetic interaction (J = −3.34 cm⁻¹). On the contrary, in complex 2, the two metal centers have been connected in end-to-end (EE) fashion exhibiting moderately strong ferromagnetic interaction (J = +19.7 cm⁻¹). Cyclic voltammetric studies performed on all the four complexes show a reasonably good correlations when E_1/2 for Cu^IICu^II → Cu^IICu^III and Cu^IICu^III → Cu^IIICu^III oxidations are plotted against σ (substituent constants) with ρ = −0.182 (R² = 0.92) and −0.684 (R² = 0.99) respectively.     

DNA binding and cleavage behaviors of copper(II) complexes with amidino-O-methylurea and N-methylphenyl-amidino-O-methylurea,and their antibacterial activities

The two designed copper(II) complexes, [Cu(L^1m)₂]Cl₂ (1) (L^1m = amidino-O-methylurea) and [Cu(L^2m)₂]Cl₂ (2) (L^2m = N-methylphenyl-amidino-O-methylurea), have been investigated for their interaction with calf thymus DNA by utilizing the absorption titration method, viscometric studies and thermal denaturation. The cleavage reaction on pBR322 DNA has been monitored by agarose gel electrophoresis. The results suggest that the two complexes can bind to DNA by non-intercalative modes and exhibit nuclease activities in which supercoiled plasmid DNA is converted to the linear form. Complex 2, with an intrinsic binding constant (K_b) of 1.16 × 10⁵ M⁻¹, shows a higher binding efficiency and a better nuclease activity than complex 1, with a K_b value of 5.67 × 10⁴ M⁻¹. Their DNA cleavage potential can be significantly enhanced by hydrogen peroxide, indicating an oxidative cleavage process. Further examination of the antibacterial activities against Campylobacter has revealed inhibition zones of 9.0 (for 1) and 14.5 mm (for 2), which are in agreement with their minimum inhibitory concentration (MIC) values of 1.56 and 0.78 mg mL⁻¹, respectively. The substantially better reactivity of 2 results from the aromatic moieties on the side chain of the L^2m ligand which act as an additional binding site.     

Synthesis,structure, and electrochemistry of pyridinecarboxamide cobalt(III) complexes; the effect of bridge substituents on the redox properties

Two series of complexes of the types trans-[Co^III(Mebpb)(amine)₂]ClO₄ {Mebpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-methylbenzene dianion, and amine = pyrrolidine (prldn) (1a), piperidine (pprdn) (2a), morpholine (mrpln) (3a), benzylamine (bzlan) (4a)}, and trans-[Co^III(cbpb)(amine)₂]X {cbpb²⁻ = N,N-bis(pyridine-2-carboxamido)-4-chlorobenzene dianion, and amine = pyrrolidine (prldn), X = PF₆ (1b), piperidine (pprdn), X = PF₆ (2b), morpholine (mrpln), X = ClO₄ (3b), benzylamine (bzlan), X = PF₆ (4b)} have been synthesized and characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structure of 1a has been determined by X-ray diffraction. The electrochemical behavior of these complexes, with the goal of evaluating the effect of axial ligation and equatorial substitution on the redox properties, is also reported. The reduction potential of Co^III, ranging from −0.53 V for (1a) to −0.31 V for (3a) and from −0.48 V for (1b) to −0.22 V for (3b) show a relatively good correlation with the σ-donor ability of the axial ligands. The methyl and chloro substituents of the equatorial ligand have a considerable effect on the redox potentials of the central cobalt ion and the ligand-centered redox processes.