聚甲基丙烯酸单层保护金纳米粒子的制备及pH响应性聚集

通过可逆断裂链转移加成聚合,制备了单分散的聚甲基丙烯酸叔丁酯,并一步水解获得了具有硫醇端基的聚甲基丙烯酸(PMAA).在还原氯金酸为金纳米粒子的同时,利用硫醇端基与金纳米粒子(GNPs)的耦合作用,一步获得了聚甲基丙烯酸单层保护的金纳米粒子.通过紫外光谱和透射电镜表征证实,金纳米粒子为单分散的球型颗粒,在水溶液中具有长期稳定性.聚甲基丙烯酸单层保护的金纳米粒子的光学性质和聚集状态,具有明显的pH响应性.在酸性条件下,由于PMAA被质子化发生疏水性转变,聚合物链收缩聚集,促使金纳米粒子之间互相靠近并聚集,其表面等离子共振吸收峰发生红移.从酸性调节为碱性后,(PMAA-@-GNPs)能重新分散,吸收峰发生蓝移.在多次循环后,溶液的光学信号能可逆互变且变化不大.     

聚甲基丙烯酸基纳米水凝胶的“绿色”合成

利用原位生成的聚甲基丙烯酸甲酯种子乳胶模板以及表面活性剂与功能单体间的正负电荷作用,发展了一种可在全水相中“绿色”合成聚甲基丙烯酸(PMAA)基纳米水凝胶的新方法.利用动态光散射法、ξ-电位测定、FTIR和TEM对纳米水凝胶的尺寸及其分布、表面电荷、组成、形态、结构和pH响应行为进行了表征.结果表明,PMAA基纳米水凝胶具有聚甲基丙烯酸甲酯内核和交联聚甲基丙烯酸外壳的核壳结构.当甲基丙烯酸(MAA)的用量由2 mL增至3 mL时,PMAA基纳米水凝胶的尺寸变大.当MAA的用量增加至5 mL时,反应体系中除了生成PMAA基纳米水凝胶外,还生成了PMAA次级粒子.PMAA基纳米水凝胶表现出良好的pH响应性:当介质的pH值由2增加至7时,其流体力学体积扩张了近80倍.     

聚甲基丙烯酸单层保护金纳米粒子选择性检测Pb2+

以聚甲基丙烯酸单层保护的金纳米粒子(GNPs)作为传感器, 实现了水溶液中Pb²⁺的选择性循环检测.先采用柠檬酸钠还原法获得尺寸均匀的GNPs, 再通过具有硫醇端基的聚甲基丙烯酸与金的强耦合作用, 获得了聚甲基丙烯酸单层保护的金纳米粒子(PMAA-@-GNPs).动态光散射、紫外-可见吸收光谱及透射电子显微镜表征证实了其单层结构.在Pb²⁺的诱导下, PMAA-@-GNPs溶液颜色从酒红色变为紫色并可肉眼识别.透射电子显微镜结果证实, 这种变化是由于Pb²⁺交联羧基使聚合物发生收缩, 并诱导GNPs的聚集所致.对比Pb²⁺与Hg²⁺, Mg²⁺, Cu²⁺, Zn²⁺, Na⁺, Ni²⁺, Fe³⁺, Cd²⁺, K⁺和Fe²⁺溶液颜色的变化, 证实此体系具有一定的选择性.用EDTA可夺取交联的Pb²⁺, 使PMAA-@-GNPs 的吸收峰恢复并可用于循环检测Pb²⁺.     

新型核壳结构水凝胶的合成与表征

以羟丙基纤维素为模板,在水溶液中合成了不含表面活性剂的聚甲基丙烯酸（PMAA）纳米水凝胶。再以该PMAA纳米水凝胶为模板,合成了具有pH和温度双重敏感的聚甲基丙烯酸/聚N-异丙基丙烯酰胺（PMAA-PNIPA）核壳结构纳米水凝胶。对纳米水凝胶的形态、结构、pH以及温度敏感性的表征结果表明,纳米水凝胶粒径为338.8～407.9 nm,并随交联剂用量的增加而减小,其体积相转变具有良好的pH及温度响应性,这种绿色合成的生物相容性新型核壳结构纳米水凝胶具有极为广泛的应用前景。     

PMAA纳米水凝胶的水相制备

利用表面活性剂间的疏水作用以及表面活性剂与单体间的氢键作用,促使甲基丙烯酸(MAA)单体在原位生成的聚甲基丙烯酸甲酯(PMMA)种子乳胶表面的选择性聚合,实现了PMAA纳米水凝胶的水相"绿色"制备。利用动态光散射、傅里叶红外光谱、透射电子显微镜表征了PMAA纳米水凝胶的尺寸、组成、形貌和pH响应性。研究了聚氧乙烯失水山梨醇单月桂酸酯(吐温20)的用量、N,N’-亚甲基双丙烯酰胺(MBA)的用量、MAA的用量和加入方式、十二烷基硫酸钠(SDS)的补加速率等对PMAA纳米水凝胶的尺寸和溶胀性能的影响。结果表明:PMAA纳米水凝胶为核-壳结构;随着MBA用量的减小、吐温20用量的增加、MAA用量的增加,PMAA纳米水凝胶的尺寸和溶胀比均增大;当采用半连续加入MAA时,PMAA纳米水凝胶的尺寸和溶胀比变小;当SDS的补加时间由60min延长到100min时,PMAA纳米水凝胶的尺寸逐渐变小。PMAA纳米水凝胶具有良好的pH响应性,当介质的pH从1增加到6时,其流体力学体积扩张了64倍。     

聚甲基丙烯酸纳米水凝胶的水相合成及其磁性功能化

利用十二烷基硫酸钠/吐温20复配表面活性剂和原位生成的聚甲基丙烯酸甲酯(PMMA)种子乳胶,发展了一种可在全水相中"绿色"合成较高浓度的聚甲基丙烯酸(PMAA)纳米水凝胶的新方法.以PMAA纳米水凝胶为前驱体,采用原位氧化沉淀法制备了磁性PMAA纳米微球.利用动态光散射法、FTIR分析、TEM观察、振动样品磁强计测试(VSM)、热重分析(TG)等对纳米水凝胶和磁性微球进行了表征,并探讨了PMAA纳米水凝胶的形成机理.结果表明,吐温20与MAA和PMAA间的氢键作用,促成了交联PMAA/吐温20复合物层在PMMA种子乳胶表面的选择性生长,导致生成了具有核壳结构的PMAA纳米水凝胶.PMAA纳米水凝胶表现出良好的p H响应性,当介质的p H值由1增加至6时,其流体力学体积扩张了近50倍.磁性PMAA纳米微球具有超顺磁性,其饱和磁化强度高达50 A·m~2/kg.     

pH响应性表面对蛋白质吸附的调控

通过表面引发原子转移自由基聚合在固定了引发剂的硅表面接枝了聚甲基丙烯酸叔丁酯(PtBMA),而后通过水解得到聚甲基丙烯酸(PMAA)聚合物刷.通过X射线光电子能谱、椭圆偏振仪和水接触角测试证明了接枝改性的成功.研究发现PMAA改性表面的浸润性和对蛋白质的吸附行为都具有一定的pH响应性.在较低pH值时改性表面相对疏水,随...     

pH和温度诱导双亲水嵌段共聚物聚甲基丙烯酸-b-聚N-(2-甲基丙烯酰氧乙基)吡咯烷酮水溶液的胶束化（英文）

基于可逆加成裂解链转移自由基(RAFT)聚合法开发了一系列新型双亲水嵌段共聚物——聚甲基丙烯酸-b-聚N-(2-甲基丙烯酰氧乙基)吡咯烷酮(PMAA-b-PNMP),并利用凝胶渗透色谱法(GPC)和~1H NMR对其结构进行了表征。光散射和冷冻电镜的结果表明,此类双亲水嵌段共聚物的水溶液具有pH和温度诱导胶束化的现象,而且PNMP的聚合度对胶束化的pH和温度影响都非常大。一般而言,PNMP的聚合度越大,胶束化的pH值越小,胶束化的温度则越高。pD相关的~1H NMR结果表明,PNMP与PMAA片段和水分子之间氢键的削弱以及PNMP与PMAA链之间相互作用的增强是pH诱导PMAA-b-PNMP胶束形成的主要原因,而PNMP片段与水分子之间氢键的削弱则是温度诱导PMAA-b-PNMP胶束形成的主要原因。此外,我们发现在PMAA-b-PNMP体系中制备的纳米金颗粒的大小可通过溶液pH进行可控调节。总体而言,pH值越高,金纳米颗粒的粒径越小。     

酶促缩聚和原子转移自由基聚合法合成AB型两亲性嵌段共聚物

Novozyme-435催化10-羟基癸酸进行自缩聚反应得到线性聚酯, 端基分别是羟基(—OH)和羧基(—COOH), 在三乙胺催化下, 分别用α-溴代丙酰溴和三甲基氯硅烷(TMSCL)进行端基官能化生成一个单官能度的大分子引发剂, 在CuCl/2,2'-联吡啶(bpy)催化体系中, 引发甲基丙烯酸环氧丙酯(GMA)的原子转移自由基反应(ATRP), 得到聚(10-羟基癸酸酯)/聚甲基丙烯酸环氧丙酯(PHDA-b-PGMA) AB 型两亲性嵌段共聚物, 其结构及分子量(分布)通过核磁共振和凝胶渗透色谱(GPC)确证. 此AB型两亲性嵌段共聚物在水溶液中能自组装形成纳米粒子, 用原子力显微镜(AFM)观察粒子的形状和大小.     

刺激响应聚合物在金纳米粒子催化体系中的应用

刺激响应聚合物是近几年来研究的热点之一,这类聚合物能够感受外界刺激而发生响应,产生物理或化学性质的变化。金纳米粒子由于量子效应,具有良好的催化性质,因此有广阔的应用前景。但是在实际的应用中却常常面临易于团聚的问题,因此时常需要将其负载于载体之上。将刺激响应聚合物引入金纳米粒子催化体系之中,一方面可以发挥普通载体所能起到的分散作用,防止金纳米粒子团聚,另一方面也可实现可控催化,可以通过外界条件的改变来调控金纳米粒子的催化性能。本文综述了该体系近期的研究进展,从体系的构建方式、刺激响应类型等方面进行了论述,并对该体系的研究与应用进行了总结与展望。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.