Surfactant addition effects on dispersion and microdomain orientation in SBS triblock copolymer/alumina nanoparticle composites

The aim of this study was to investigate the effects of surfactant addition on the dispersion of 1–3 wt.% alumina nanoparticles on the self-assembled morphology of poly(styrene-b-butadiene-b-styrene) (SBS) linear triblock copolymer. The neat triblock copolymer microphase separated into PS cylinders self-assembled on a hexagonal array in the PB matrix, being the orientation of domains dependent on the annealing conditions. UV–vis and AFM analyses showed an improvement on dispersion of Al₂O₃ nanoparticles into SBS matrix by adding dodecanethiol as organic surfactant, due to its miscibility with PS block. Interactions between surfactant-coated Al₂O₃ nanoparticles with PS block were demonstrated by the variation on the glass transition temperature of this block. AFM analysis showed that the incorporation of surfactant-coated Al₂O₃ nanoparticles in the SBS matrix have great influence on the orientation of microphase separated domains in SBS nanocomposites.     

Generation of nanocomposites based on polystyrene-grafted CdSe nanoparticles by grafting through and block copolymer

Continuing with our previous work, in which CdSe nanoparticles were functionalized with polystyrene (PS) brushes (CdSe-PS) by the grafting through method, nanocomposites were prepared by adding them to a poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymer. After characterizing CdSe-PS nanoparticles obtained at different polymerization times of 3, 5, and 8 h by means of thermogravimetric analysis and gel permeation chromatography, CdSe-PS nanoparticles obtained after 5 h of polymerization (CdSe-PS(5h)) were chosen as the most adequate for the generation of nanocomposites. Atomic force microscopy (AFM) was used for morphological characterization of SBS/CdSe-PS(5h) nanocomposites. AFM images showed a good dispersion of the nanoparticles in the block copolymer, with the placement of the nanoparticles in the PS domains due to the improved affinity obtained by their functionalization with PS brushes.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-SILICA NANO-COMPOSITES. II. POLY[METHYL METHACRYLATE-block-(METHYL METHACRYLATE-co-2-HYDROXYETHYL METHACRYLATE)]

ABSTRACT

One kind of poly(methyl methacrylate [MMA]-block-2-hydroxyethyl methacrylate [HEMA]) block copolymer and two kinds of poly[MMA1-block-(MMA-co-HEMA)] block-random copolymers were synthesized by atom transfer radical polymerization. Then, poly(methyl methacrylate) [PMMA]-silica nano composites were synthesized by blending perhydropolysilazane (PHPS: NN-110) and block or block-random copolymers in 1,4-dioxane and casting the blend solutions. All composite films were transparent. Silica and organic domains were microphase separated in the composites. The effects of PHEMA content and blend ratio of PHPS to hydroxyl group on the microphase separation were investigated by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The thermal properties of the composites were investigated by differential scanning calorimetry (DSC) and thermal gravitic analysis (TGA).     

Electrostatic force microscopy measurements of CdSe-PS nanoparticles and CdSe-PS/poly(styrene-b-butadiene-b-styrene) nanocomposites

Electrostatic force microscopy (EFM) measurements were performed to analyze the conductive properties of CdSe nanoparticles functionalized with polystyrene (PS) brushes and embedded in a poly(styrene-b-butadiene-b-styrene) triblock copolymer. CdSe nanoparticles were synthesized aqueously and functionalized with polystyrene chains by the grafting through technique. CdSe-PS nanoparticles obtained after 5 and 8 h of polymerization were analyzed, in order to study the effect of the molecular weight of PS chains on conductive properties. EFM results showed the maintenance of the conductive properties of CdSe nanoparticles through functionalization reactions and even when they were confined in the block copolymer. Due to the low differences between the values obtained in the response of the samples to the charged tip, no effect of the molecular weight of brushes was confirmed.     

Characterization of deformation behavior of heterogeneous polymer systems using spectroscopic and microscopic methods

Rheo-optical Fourier-transform infrared (FTIR) spectroscopy in combination with Atomic Force Microscopy (AFM) was used to clarify the correlation between the morphology and the mechanical properties of two groups of heterogeneous polymers: different styrene-block-butadiene-block-styrene triblock copolymers and a dynamic vulcanizate based on polypropylene/ethylene-octene-copolymer. In all the polymers investigated the soft phase always oriented more than the hard phase. The degree of orientation in different phases depended on the nature of the phases as well as on the stress distribution in correlation to the morphology and their alignment. The observations at the molecular level corresponded well with the results from morphological studies at the microscopic level, which, in fact, enables an extensive and complex understanding of the structure-properties correlation of these types of polymers.     

Thermomechanical and shape memory properties of SCF/SBS/LLDPE composites

A thermally triggered shape memory polymer composite was prepared by blending short carbon fiber (SCF) into a blend of poly(styrene-b-butadiene-b-styrene) triblock copolymer (SBS)/linear low density polyethylene (LLDPE) prior to curing. These composites have excellent processability compared with other thermosets. The dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC) were investigated to assess the thermomechanical properties of the SCF/SBS/LLDPE composite. Scanning electron microscope (SEM) imaging of the samples was performed to show the distribution of the SCF in the composite. The study specifically focused on the effect of SCF on the shape memory behavior of the SCF/SBS/LLDPE composite. The results indicated that the large amount of SCF significantly improved the mechanical property of the polymer composites while not damaging the shape memory performance. The SCF/SBS/LLDPE composites exhibited excellent shape memory behavior when the SCF content was less than 15.0 wt%. Moreover, the shape fixity ratio and shape recovery time of the SCF/SBS/LLDPE composites increased with the SCF content.     

Synthesis of poly(styrene-b-tetrahydrofuran-b-styrene) triblock copolymers by transformation from living cationic into living radical polymerization using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl as a transforming agent

Synthesis of poly(styrene-b-tetrahydrofuran (THF)-b-styrene) triblock copolymers was performed by transformation from living cationic into living radical polymerization, using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (4-hydroxy-TEMPO) as a transforming agent. Sodium 4-oxy-TEMPO, derived from 4-hydroxy-TEMPO, reacted with the living poly(THF), which was prepared by cationic polymerization of THF using trifluoromethanesulfonic acid anhydride as an initiator, resulting in quantitative formation of the poly(THF) with TEMPO at both the chain ends. The resulting polymers were able to serve as a polymeric counter radical for the radical polymerization of styrene by benzoyl peroxide, to give the corresponding triblock copolymer in quantitative efficiency. The polymerization was found to proceed in accordance with a living mechanism, because the conversion of styrene linearly increased over time, and the molar ratio of styrene to THF units in the copolymer also increased as a result of increasing the conversion. The TEM pictures demonstrated that the resulting copolymers promoted microphase segregation. It was found that the films of these copolymers showed contact angles intermediate between those of poly(THF) and of polystyrene. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2059–2068, 1998     

New telechelic polymers and sequential copolymers by polyfunctional initiator-transfer agents (inifers). III. Synthesis and characterization of poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene)

The synthesis of a new glassy-rubbery-glassy triblock copolymer poly(α-methylstyrene-b-isobutylene-b-α-methylstyrene) has been demonstrated. The key to the synthesis was the preparation by inifer method of a perfectly bifunctional polyisobutylene which carries tert-chlorine end groups Cl-PIB-Cl. In conjunction with Et₂AlCl coinitiator, the telechelic Cl-PIB-Cl molecule initiates the polymerization of α-methylstyrene at both ends of the prepolymer. Triblock composition can be controlled by the judicious selection of synthesis conditions; that is, Cl-PIB-Cl molecular weight, α-methylstyrene concentration, and solvent polarity. Theoretical triblock M _n calculated from M _n of Cl-PIB-Cl and triblock overall composition is in excellent agreement with experimental M _n which indicates negligible homopolymer contamination. Extraction with a series of hydrocarbon solvents reveals broad composition distribution. The stress-strain profile of a triblock is similar to that of a poly(styrene-b-butadiene-b-styrene) thermoplastic elastomer of similar composition.     

Enhancement of mechanical properties of triblock copolymers by random copolymer middle blocks

Symmetric styrene-b-styrene-co-butadiene-b-styrene (S-SB-S) tri-block copolymers with varying middle and outer block composition have been studied. We report our findings based on a systematic variation of the effective interaction parameter (χ) by adjusting the composition of the random copolymer in the middle block and of the outer blocks (in terms of PS-chain length) which allows us to explore the χ-parameter space with regard to molecular architecture more thoroughly than in SBS triblock copolymers. A variation in the S/B middle block composition or in the PS outer block content leads to a change in phase behaviour and morphology simultaneously accompanied by significant changes in mechanical properties, varying from elastomeric to thermoplastic property profile. Despite high PS contents of 55-75 wt.% these S-SB-S triblock copolymers reveal high strain at break values between 650% and 350% which is in striking contrast to the conventional SBS triblock copolymers where only about 10% strain at break have been reported to be achieved with similar PS-content (∼75 wt.%).     

Synthesis of poly(N,N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N,N‐dimethylacrylamide) and its application for separation of proteins by capillary zone electrophoresis

A series of well‐defined triblock copolymers, poly(N, N‐dimethylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N, N‐dimethylacrylamide) (PDMA‐b‐PEO‐b‐PDMA) synthesized by atom transfer radical polymerization, were used as physical coatings for protein separation. A comparative study of EOF showed that the triblock copolymer presented good capillary coating ability and EOF efficient suppression. The effects of the M_r of PDMA block in PDMA‐b‐PEO‐b‐PDMA triblock copolymer and buffer pH on the separation of basic protein for CE were investigated. Moreover, the influence of the copolymer structure on separation of basic protein was studied by comparing the performance of PDMA‐b‐PEO‐b‐PDMA triblock copolymer with PEO‐b‐PDMA diblock copolymer. Furthermore, the triblock copolymer coating showed higher separation efficiency and better migration time repeatability than fused‐silica capillary when used in protein mixture separation and milk powder samples separation, respectively. The results demonstrated that the triblock copolymer coatings would have a wide application in the field of protein separation.     

Microphase separation in thin films of supramolecular assemblies composed of a triblock copolymer and low-molecular-weight additive

The phase behavior of supramolecular assemblies (SMAs) formed by poly(4-vinylpyridine)-block-polystyrene-block-poly(4-vinylpyridine) (P4VP-b-PS-b-P4VP) triblock copolymer with 2-(4′-hydroxybenzeneazo)benzoic acid (HABA) was investigated with respect to the molar ratio (X) between HABA and 4VP monomer unit in bulk as well as in thin films. The results were compared with SMAs formed by a PS-b-P4VP diblock copolymer of similar composition as the triblock but half the molecular weight to ascertain the effect of molecular architecture on microphase separation. In bulk, both the di- and triblock SMAs showed composition-dependent morphological transitions, which could be tuned by HABA/4VP molar ratio. The domain spacing of the SMA was not significantly affected by the molecular architecture of the constituting block copolymers. In thin films also, both the di- and triblock SMAs showed more or less similar morphological transitions depending on X. Interestingly, the domain orientation of the cylindrical or lamellar microdomains in the SMAs was influenced by the molecular architecture of the block copolymer. After chloroform annealing, although the diblock SMAs showed in-plane orientation of the domains, triblock SMAs showed perpendicular domain orientation. The perpendicular orientation of the microdomains in triblock was favored because it allowed the mid-PS blocks to acquire normal distribution of loop and bridged conformations. Furthermore, the orientation of the lamellar and cylindrical microdomains of the diblock SMAs was found to switch to perpendicular orientation after annealing in 1,4-dioxane vapors. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1594–1605, 2010     

Microphase‐separated structure of 1,3‐cyclohexadiene/butadiene triblock copolymers and its effect on mechanical and thermal properties

We report the effect of microphase‐separated structure on the mechanical and thermal properties of several poly(1,3‐cyclohexadiene‐block‐butadiene‐block‐1,3‐cyclohexadiene) triblock copolymers (PCHD‐block‐PBd‐block‐PCHD) and of their hydrogenated derivatives: poly(cyclohexene‐block‐ethylene/butylene‐block‐cyclohexene) triblock copolymers (PCHE‐block‐PEB‐block‐PCHE). Both mechanical strength and heat‐resistant temperature (ex. Vicat Softening Temperature: VSPT) tended to increase with an increase in the 1,3‐cyclohexadiene (CHD)/butadiene ratio. On the other hand, heat resistance of the hydrogenated block copolymer was found to be higher than that of the unhydrogenated block copolymer. However, the mechanical strength was lower than those of the unhydrogenated block copolymer with the same ratio of CHD to butadiene. To clarify the relationship between the higher order structures of those block copolymers and their properties, we observed the microphase‐separated structure by transmission electron microscope (TEM). Hydrogenated block copolymers were found to have more finely dispersed microphase‐separated structures than those of the unhydrogenated block copolymers with the same CHD/Bd ratios through the use of TEM and the small‐angle X‐ray scattering (SAXS) technique. Those results indicated that the segregation strength between the PCHE block sequence and the PEB block sequence increased, depending on hydrogenation of the unhydrogenated precursor. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 13–22, 2001     

Preparing a functionalized thermoplastic elastomer—bromination and synthesis of poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene)

A poly(p-methylstyrene-co-styrene)-block-poly(ethylene-co-butene)-block-poly(p-methylstyrene-co-styrene) thermoplastic elastomer was prepared via anionic synthesis of poly(p-methylstyrene-co-styrene)-block-polybutadiene-block-poly(p-methylstyrene-co-styrene) followed by a hydrogenation of the polybutadiene midblock. The sequential method used for the synthesis has resulted in a nearly monodispersed polymer with a polydispersity of 1.03. Bromination of such synthesized copolymer was next, conducted using two different methods. In the presence of a FeCl₃ catalyst in CCl₄ solvent, bromination occurred through forming a carbocationic complex to undergo an electrophilic substitution reaction on the aromatic rings of the end blocks. Nevertheless, the bromination occurred exclusively on the p-methyl groups of the end blocks when conducted in cyclohexane using photoinitiated free radicals. The microstructure of the brominated molecules were analyzed using ¹H-NMR and ¹³C-NMR, and bromination efficiencies of 48 and 44% have been attained from the two methods, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4108–4116, 1999     

Synthesis of microspheres with microphase‐separated shells

Novel structural microspheres of the Janus type, with microphase‐separated polystyrene (PS) and poly(tert‐butyl methacrylate) (PBMA) shells and crosslinked poly(2‐vinyl pyridine) (PVP) cores, were synthesized with the crosslinking of PVP spherical domains in poly(styrene‐block‐2‐vinyl pyridine‐block‐tert‐butyl methacrylate) ABC triblock terpolymer film with PS/PBMA lamellae–PVP spherical structures. For the formation of lamellae‐sphere structures, toluene, which was a selective solvent for the ABC triblock terpolymer, was used. With the crosslinking of PVP spheres in the microphase‐separated film with 1,4‐diiodobutane gas, the microphase structure of the terpolymer was fixed, and microspheres composed of microphase‐separated PS and PBMA shells and P2VP cores were obtained. The size distribution of the purified microspheres was narrow. The characteristics of the microspheres and their aggregation behaviors in selective solvents were investigated by transmission electron microscopy and light scattering methods. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2091–2097, 2000     

Application of FTIR Microscopy in Combinatorial Experimentation on Polymer Blends

Summary: A novel combinatorial, high-throughput experimentation (HTE) setup has been developed, which allows for rapid mapping of the phase behavior of blends of homopolymers and block copolymers. The principle is based on the preparation of composition (ϕ)-temperature (T) gradient films. Linear ϕ gradients were obtained over a large composition range, as shown by FTIR microscopy. The applicability of this combinatorial approach was demonstrated by studying the phase behavior of a poly(styrene-co-acrylonitrile) (SAN)/poly(methyl methacrylate-co-ethyl acrylate) (PMMA-EA) blend with varying EA content and a poly(styrene-b-butadiene-b-methyl methacrylate) (SBM) triblock copolymer.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-SILICA NANO-COMPOSITE

ABSTRACT

Transparent organic/pre-ceramic composite films of poly(methyl methacrylate) [PMMA] and perhydropolysilazane [PHPS] were synthesized by blending poly(methyl methacrylate-co-2-hydroxyethyl methacrylate) [P(MMA-co-HEMA)] random copolymers and PHPS. In the blend films, P(MMA-graft-PHPS) graft copolymers were formed, PMMA and PHPS were microscopically phase-separated in the solid state. Morphology of the microphase separation was investigated by transmission electron microscopy by changing HEMA content of the random copolymers and blend ratio of PHPS to HEMA. To convert PHPS to silica glass, the blend films were calcinated at 100°C. The morphology of the microphase separation of the films was not changed by the calcinations; the calcinated films were transparent. When the molar content of HEMA of P(MMA-co-HEMA) and the molar content of PHPS to HEMA in feed were 14.5% and 150%, respectively, the morphology was well ordered lamellae of PMMA and silica.     

ABA‐type liquid crystalline triblock copolymers via nitroxide‐mediated radical polymerization: Design,synthesis, and morphologies

We have designed and synthesized rod–coil–rod triblock copolymers of controlled molecular weight by two‐step nitroxide‐mediated radical polymerization, where the rod part consists of “mesogen‐jacketed liquid crystalline polymer” (MJLCP). The MJLCP segment examined in our studies is poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) while the coil part is polyisoprene (PI). Characterization of the triblock copolymers by GPC, ¹H and ¹³C NMR spectroscopies, TGA, DSC confirmed that the triblock copolymers were comprised of microphase‐separated low T_g amorphous PI and high T_g PMPCS blocks. Analysis of POM and 1D, 2D‐WAXD demonstrated that the triblock copolymers formed nematic liquid crystal phase. Morphological studies using TEM indicated the sample formed lamellar structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5949–5956, 2007     

Local compositional fluctuations in PPO/HIPSand PPO/SBS blends

Solid-state NMR relaxation has been used to explore the distribution of components in poly(phenylene oxide) (PPO) high impact polystyrene (HIPS) and PPO/poly(styrene-b-butadiene-b-styrene) (SBS) blends. The nuclear relaxation of PPO in the former system is single exponential for all compositions, but the relaxation of PS in the blend is simple exponential only when the PPO content is low but is otherwise nonexponential. The nuclear magnetization decay curves were analyzed in terms of statistical compositional fluctuation at the scale of spin diffusion distances of several nm. Distribution functions for nuclear relaxation and for blend composition have been derived. Extraction of low molecular weight occluded PS from HIPS resulted in blends having reduced homogeneity. Addition of low molecular weight PS enhanced homogeneity in both the PPO/HIPS and PPO/SBS blends. © 1994 John Wiley & Sons, Inc.     

SEBS的间接氯甲基化研究

研究了以二甲氧基甲烷和氯化亚砜为原料实现氢化聚苯乙烯-乙烯丁烯无规共聚物-聚苯乙烯三嵌段共聚物(SEBS)苯环对位上的间接氯甲基化. 通过红外光谱和核磁氢谱表征了氯甲基化SEBS的化学结构; 采用佛尔哈德法测定了氯甲基化程度. 通过对比研究几种催化剂的催化效果, 表明氯化锌催化效果最佳, 在氯化锌浓度仅为0.056 mol/L, 45 ℃, 12 h内即可使SEBS的苯环对位氯甲基化程度达到28.94%. 本文还探讨了催化剂用量、反应温度、反应时间对接氯甲基化程度的影响.     

Synthesis of poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) copolymers by free radical polymerization combined with oxidative coupling

Poly(methyl methacrylate-co-styrene)-block-polysulfide-block-poly(methyl methacrylate-co-styrene) triblock copolymers were synthesized for the first time by the free radical copolymerization of methyl methacrylate (MMA) and styrene (St) in the presence of a thiocol oligomer as a chain transfer agent, followed by chemical oxidation of the remaining SH-end groups. The apparent chain transfer constant of the thiocol SH groups in the copolymerization reaction was estimated from the rate of consumption of the thiol groups versus the overall rate of consumption of the monomers (C_T = 1.28). Based on this value, the chain transfer constant of the thiocol SH groups in St polymerization was calculated . The triblock copolymers synthesized were characterized by SEC and ¹H NMR measurements.