Application of an imidazoline group-containing chelating fiber for the determination of trace noble metals in superhigh-temperature alloys

An imidazoline group-containing chelating fiber was prepared by means of the reaction of nitrile groups with ethylenediamine in an hydrazine-modified polyacrylonitrile fiber. The adsorption properties of the chelating fiber for Au(III), Pd(II), Pt(IV), Ir(IV), Os(IV), Rh(III) and Ru(IV) ions, such as binding capacity, distribution coefficient, sorptive rate and quantitative elution of Au(III), Pd(II) and Pt(IV) ions were investigated. The imidazoline group-containing chelating fiber possessed high binding capacities and good adsorption kinetic properties, exhibited high affinity for noble metals in 0.1-1.0 mol/L HCl and could be efficiently re-used. After the separation of trace Au(III), Pd(II) and Pt(IV) ions from a matrix using the chelating fiber, these ions could be determined by ICP-AES with satisfactory results, and the relative standard deviation for Au(III), Pd(II) and Pt(IV) ions was less than 6%.     

Application of an imidazoline group-containing chelating fiber for the determination of trace noble metals in superhigh-temperature alloys

An imidazoline group-containing chelating fiber was prepared by means of the reaction of nitrile groups with ethylenediamine in an hydrazine-modified polyacrylonitrile fiber. The adsorption properties of the chelating fiber for Au(III), Pd(II), Pt(IV), Ir(IV), Os(IV), Rh(III) and Ru(IV) ions, such as binding capacity, distribution coefficient, sorptive rate and quantitative elution of Au(III), Pd(II) and Pt(IV) ions were investigated. The imidazoline group-containing chelating fiber possessed high binding capacities and good adsorption kinetic properties, exhibited high affinity for noble metals in 0.1–1.0 mol/L HCl and could be efficiently re-used. After the separation of trace Au(III), Pd(II) and Pt(IV) ions from a matrix using the chelating fiber, these ions could be determined by ICP-AES with satisfactory results, and the relative standard deviation for Au(III), Pd(II) and Pt(IV) ions was less than 6%. Received: 5 July 1999 / Revised: 4 October 1999 / Accepted: 4 October 1999     

Ion flotation of rhodium(III) and palladium(II) with anionic surfactants

The ion flotation of rhodium(III) and palladium(II) with some anionic surfactants has been investigated. Two flotation procedures are proposed for the separation of some platinum metals, based on differences in the kinetic properties of the chloro-complexes of rhodium(III), palladium(II) and platinum(IV). The first involves the selective flotation of Rh(H(2)O)(3+)(6) from PdCl(2-)(4) and PtCl(2-)(6) in dilute hydrochloric acid with sodium dodecylbenzenesulfonate (SDBS). After precipitation of the hydroxide and redissolution in dilute acid, the Rh(III) is converted into Rh(H(2)O)(3+)(6), Pd(II) and Pt(IV) remaining as PdCl(2-)(4) and PtCl(2-)(6) respectively, and separation is achieved by floating the Rh(H(2)O)(3+)(6) with SDBS. The second is for separation of Pd(II). Prior to flotation, the solution of PdCl(2-)(4) and PtCl(2-)(6) is heated with ammonium acetate to convert PdCl(2-)(4) into Pd(NH(3))(2+)(4). The chloro-complex of Pt(IV) is unaffected. The complex cation, Pd(NH(3))(2+)(4), is then selectively floated with SDBS. The procedures are fast, simple and do not require expensive reagents and apparatus.     

Pyrimidinethiol as a reagent for extraction separation of platinum metals and gold Determination of Pd(II), Os(VIII) and Ru(III)

The solvent extraction separation of Pt(IV), Pd(II), Os(VIII), Ru(III) and Au(III) from one another and also from Rh(III) and Ir(III) with 1-(2'-nitro-4'-tolyl)-4,4,6-trimethyl-(1H, 4H)-2-pyrimidinethiol has been investigated. Photometric procedures have been developed for the determination of Pd(II), Os(VIII) and Ru(III) with the same reagent. The reagent allows the enrichment of Pd(II) and Au(III) at the trace level from a large volume of aqueous medium even in the presence of base metals. The method can be used for the determination of platinum metals and gold in alloys.     

Block copolymer micellization induced microphase mass transfer: partition of Pd(II), Pt(IV) and Rh(III) in three-liquid-phase systems of S201-EOPO-Na2SO4-H2O

Three-liquid-phase partitioning of Pd(II), Pt(IV) and Rh(III) in systems of S201(diisoamyl sulfide)/nonane-EOPO(polyethylene oxide-polypropylene oxide random block copolymer)-Na(2)SO(4)-H(2)O was investigated. Experimental results indicated that the selective enrichment of Pd(II), Pt(IV) and Rh(III) respectively into the S201 organic top phase, EOPO-based middle phase and Na(2)SO(4) bottom phase was achieved by control over the phase behavior of the three-liquid-phase systems (TLPS). The microphase mass transfer behavior of Pt(IV), Pd(II) and Rh(III) was closely related to the micellization of EOPO molecules. A suggested micro-mechanism model and a mass transfer model describe the micellization of EOPO molecules and the effect on mass transfer of platinum ions across the microphase interfaces. The salting-out induced continuous dehydration and ordered arrangement of the hydrophilic PEO segments in amphiphilic EOPO micelle, and these are the main driving forces for mass transfer of platinum metal ions onto the exposed activity sites of the dehydrated PEO segments. The differences in microphase interfacial structure of EOPO micelles are crucial for the efficient separation between Pt(IV), Pd(II) and Rh(III).     

Application of a macroporous resin containing imidazoline groups to preconcentration and separation of gold, platinum and palladium prior to ICP-AES determination

A new functional resin with a long functional side chain was synthesized by modification of aminated macroporous poly(vinyl chloride) resin with cyanoethylene and ethylenediamine. Traces of Au(III), Pt(IV) and Pd(II) in aqueous solution were quantitatively adsorbed in the acidity range of pH 4 and C(H(+)) 3 M. The rate of equilibration is high; Cu(2+), Fe(3+), Ni(2+), etc. exhibit little interference on the adsorption of the sought noble metals. The saturated adsorption capacities for Au(III), Pt(IV), Pd(II) and Ir(IV) in 2 M HCl were 4.0, 1.57, 2.26, 1.85 mmol g(-1). Adsorbed ions can be quantitatively desorbed by 4% thiourea +0.25 M H(2)SO(4). The resin has good reusability, and can be used for preconcentration and separation of Au(III), Pt(IV) and Pd(II) prior to their determination by ICP-AES with satisfactory results.     

Selective extraction of gold(III) in the presence of Pd(II) and Pt(IV) by salting-out of the mixture of 2-propanol and water

The mixture of 2-propanol with water has been employed to extract Au(III) along with other precious metals such as Pd(II) and Pt(IV) by using NaCl in the concentration range of 2.5-4.0 mol dm(-3). Upon the addition of NaCl within this concentration range (2.5-4.0 mol dm(-3)) phase separation was attained. Gold(III) in aqueous phase was quantitatively extracted into the 2-propanol phase at 2.5-4.0 mol dm(-3) of NaCl. The extraction of the other metals such as Pd(II) and Pt(IV) was much lower than for that of Au(III). Thus a maximal selective separation of Au(III) from these metals could be attained using the mixture of 2-propanol with water. A reaction mechanism involving the ion-pair of Na(+) and [AuCl(4)](-) has been proposed to explain this extraction.     

Consecutive thin-layer chromatographic separation of Au(III), Pt(IV), Pd(II) and large amounts of associated base metals

Summary The TLC system composed of ECTEOLA-cellulose and 2.5 mol/l HCl–2.5 mol/l NaCl–0.6% (w/v) H₂O₂ solution allows consecutive separations of Au(III), Pt(IV), Pd(II) and a number of associated base metals such as Cr(III), Mn(II), Fe(III), Co(II) Ni(II), Cu(II), Mg, Ca, Ba, Al, Bi(III), Pb(II), Zn(II) and Ag(I) coexisting in an extremely wide range of amounts and ratios, to be conducted completely in a single run. The effectiveness of the present system is verified by applying it to various synthesized samples containing the three noble metals and one of the base metals, Pt-metal powder and two kinds of Au-alloys.     

Synthesis of poly(N-aminoethyl)acrylamide chelating fiber and properties of concentration and separation of noble metal ions from samples

A new kind of poly(N-aminoethyl)acrylamide chelating fiber was synthesized from nitrilon (an acrylonitrile-based synthetic fiber) and used for the concentration and separation of traces of noble metal ions from solution. The results showed that 16-80 ng ml (1) of Au(III), Pt(IV), Pd(IV), Ir(IV), Ru(III) and Rh(III) can be quantitatively concentrated by the fiber up to a flow rate of 20 ml min (-1) at pH 3, and can be desorbed quantitatively with an eluting agent from the fiber column with recoveries of 96-100%. For a fiber reused 10 times, the recoveries of these ions were still over 94%, and a 100-1000 times excess of Fe(III), Al(III), Ca(II), Mg(II), Ni(II), Co(II), Cu(II) and Zn(II) caused no interference in the determination of these ions by inductively-coupled plasma atomic emission spectrometry. The capacities of the fiber for the analytes were in the range 0.80-2.62 mol g(-1), The relative standard deviation of the method was between 0.02% and 2.6%. Recoveries of a standard added to a real sample were 96.8-99.2%. The average error for the analysis by this method for a powder sample was 3.5%. The IR spectra of the analyte-bearing fiber showed that these ions coordinated to nitrogen sites in the fiber.     

15N NMR coordination shifts in Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives

The 15N NMR data for 105 complexes of Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with simple azines such as pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives have been reviewed. The 15N NMR coordination shifts, i.e. the differences between the 15N chemical shifts of the same nitrogen in the molecules of the complex and the ligand (Delta(15N) (coord) = delta(15N) (compl)--delta(15N) (lig)), have been related to some structural features of the reviewed coordination compounds, like the type of the central ion and the character of auxiliary ligands (mainly in trans position). These Delta(15N) (coord) parameters are negative, their absolute magnitudes (ca 30-150 ppm) generally increasing in the metal order Au(III) < Pd(II) < Pt(II) and Rh(III) < Co(III) < Pt(IV) < Ir(III), as well as with the enhanced trans influence of the other donor atoms (H, C < Cl < N).     

Selective preconcentration of Au(III), Pt(IV) and Pd(II) on silica gel modified with γ-aminopropyltriethoxysilane

Silica gel functionalized by reaction with γ-aminopropyltriethoxysilane was prepared and its adsorption characteirstics for metal ions were studied. This material selectively removes the Au(III), Pt(IV) and Pd(II) chloro complex ions from sample solutions containing Fe(III) and Cu(II) ions by ion exchange.     

Quantitative separation of gallium from zinc, copper, indium, iron(III) and other elements by cation-exchange chromatography in hydrobromic acid-acetone medium

Gallium can be separated from Zn, Cu(II), In, Cd, Pb(II), Bi(III), Au(III), Pt(IV), Pd(II), Tl(III), Sn(IV) and Fe(III) by elution of these elements with 0.50M hydrobromic acid in 80% acetone medium, from a column of AG50W-X4 cation-exchange resin. Gallium is retained and can be eluted with 3M hydrochloric acid. Separations are sharp and quantitative except for iron(III) which shows extensive tailing. With 0.20M hydrobromic acid in 80% acetone as eluting agent, all the species above except iron(III) and copper(II) can be separated from gallium with very large separation factors. Only a 1-g resin column and small elution volumes are required to separate trace amounts and up to 0.5 mmole of gallium from more than 1 g of zinc or the other elements. Hg(II), Rh(III), Ir(IV), Se(IV), Ge(IV), As(III) and Sb(III) have not been investigated, but should be separated together with zinc according to their known distribution coefficients. Relevant elution curves, results for the analysis of synthetic mixtures and for amounts of some elements remaining in the gallium fraction are presented.     

Preparation and adsorption properties of monodisperse chitosan-bound Fe3O4 magnetic nanoparticles for removal of Cu(II) ions

Monodisperse chitosan-bound Fe(3)O(4) nanoparticles were developed as a novel magnetic nano-adsorbent for the removal of heavy metal ions. Chitosan was first carboxymethylated and then covalently bound on the surface of Fe(3)O(4) nanoparticles via carbodiimide activation. Transmission electron microscopy micrographs showed that the chitosan-bound Fe(3)O(4) nanoparticles were monodisperse and had a mean diameter of 13.5 nm. X-ray diffraction patterns indicated that the magnetic nanoparticles were pure Fe(3)O(4) with a spinel structure, and the binding of chitosan did not result in a phase change. The binding of chitosan was also demonstrated by the measurement of zeta potential, and the weight percentage of chitosan bound to Fe(3)O(4) nanoparticles was estimated to be about 4.92 wt%. The chitosan-bound Fe(3)O(4) nanoparticles were shown to be quite efficient for the removal of Cu(II) ions at pH>2. In particular, the adsorption rate was so fast that the equilibrium was achieved within 1 min due to the absence of internal diffusion resistance. The adsorption data obeyed the Langmuir equation with a maximum adsorption capacity of 21.5 mg g(-1) and a Langmuir adsorption equilibrium constant of 0.0165 L mg(-1). The pH and temperature effects revealed that the adsorption capacity increased significantly with increasing pH at pH 2-5, and the adsorption process was exothermic in nature with an enthalpy change of -6.14 kJ mol(-1) at 300-330 K.     

Behaviour of palladium(II), platinum(IV), and rhodium(III) in artificial and natural waters: influence of reactor surface and geochemistry on metal recovery

The recovery of dissolved platinum group elements (PGE: Pd(II), Pt(IV) and Rh(III)) added to Milli-Q^® water, artificial freshwater and seawater and filtered natural waters has been studied, as a function of pH and PGE concentration, in containers of varying synthetic composition. The least adsorptive and/or precipitative loss was obtained for borosilicate glass under most of the conditions employed, whereas the greatest loss was obtained for low-density polyethylene. Of the polymeric materials tested, the adsorptive and/or precipitative loss of PGE was lowest for fluorinated ethylene propylene (Teflon^®). The loss of Pd(II) in freshwater was significant due to its affinity for surface adsorption and its relatively low solubility. The presence of natural dissolved organic matter increases the recovery of Pd(II) but enhances the loss of Pt(IV). The loss of Rh(III) in seawater was significant and was mainly due to precipitation, whereas Pd(II) recovery was enhanced, compared to freshwater, because of its complexation with chloride. The results have important implications regarding protocols employed for sample preservation and controlled laboratory experiments used in the study of the speciation and biogeochemical behaviour of PGE.     

MHNAMT,a new locating and chelating agent in thin-layer chromatographic determination of Cu(II), Co(II), Ni(II), Pd(II), Pt(IV), and Rh(III)

Summary Synthesis of MHNAMT [3-methyl-4-(2-hydroxy-1 naphthalideneamino)-5-mercapto-1,2,4-triazole] and its IR and NMR spectral data are reported. The high stability of the characteristically coloured chelates with Cu(II), Co(II), Ni(II), Pd(II), Pt(IV) and Rh(III) has been made the basis for their efficient ascending TLC separations on silica gel G layers, when present together. Results of three different solvent systems are included to assess efficient resolution of the chelates.     

Pyridine-2-aldoxime and 6-methylpyridine-2-aldoxime as gravimetric reagents for estimation of palladium(II) and uranium(VI)

Pyridine-2-aldoiumc (I) has been found to be a sensitive reagent for the gravimetric determination of palladium(II). From chloride medium, precipitation is complete at pH 3.0-11.0, and in solution containing 1NHNO(3) to pH6.0. The compositions of the precipitates (dried at 130 degrees ) correspond to PdL(2), and PdL(2). HNO(3) (HL representing the reagent) respectively. Pd(II) can be estimated gravimetncally in presence of acetate, oxalate, tartrate, phosphate, fluoride borate, perchlorate, Cu(II), Cd, Co(II), Fe(II), Ni, Zn, Pb, Bi, Sb(III), Pt(IV), Ir(IV), Ru(III), Rh(III); Os(IV) in quantities more than twice that of Pd(II), and Ag(I), Au(III) and Fe(II) even m traces cause serious interference. The yellow uranium(VI) complex with (I) is precipitated quantitatively over the pH range 3.5-10.5 and, after washing and drying corresponds to the composition (c(6)h(5)n(2)o)(2)uo(2), The uranium(VI) complex with 6-methylpyridine-2-aldoxime (II) is precipitated quantitatively over the pH range 3.0-10.5, and after washing and drying at 120-130 degrees corresponds to UO(2),(C(7),H(7),N(2)O)(2). Both (I) and (II) are suitable for the estimation of 1-50 mg of uranium(VI) in the presence of up to 10-fold quantities ofTh(IV), La(III) and Ce(III) even when present together. Ce(IV) in quantities more than three times that of U must be reduced to Ce(III). Tartrate, citrate, phosphate, Ti(IV) and Zr interfere, but acetate, oxalate, and borate do not.     

Ion flotation studies of the chlorocomplexes of some platinum group metals

The anionic chlorocomplexes of Au(III), Pt(IV), Pd(II), Ir(IV), Ir(III) and Rh(III) can be floated from aqueous solutions with cationic surfactants of the type RNR'₃Br. The flotation behavior of each metal is reported with respect to variations of hydrochloric acid and sodium chloride concentrations, the R and R' chain lengths, initial surfactant concentrations and initial metal ion concentrations. The flotation behavior of the metals is compared to the anion-exchange selectivity coefficients and a flotation selectivity sequence of Au(III) > Pt(IV), Ir(IV), Pd(II) > Ir(III) > Rh(III) is generally observed. Nearly 100% of Au(III), Pt(IV), Ir(IV) and Pd(II) can be recovered from dilute solutions using the ion flotation procedures.     

Development of liquid-liquid extraction and separation method for ruthenium(III) with 2-octylaminopyridine from succinate media: Analysis of catalysts

Ruthenium(III) has been efficiently extracted from 0.05 M sodium succinate at pH 9.5 by 2-octylaminopyridine in xylene and stripped with aqueous 10% (w/v) thiourea solution and determined spectrophotometrically. Various parameters viz., pH, weak acid concentration, reagent concentration, stripping agents, contact time, loading capacity, aq.: org. volume ratio, solvent has been thoroughly investigated for quantitative extraction of ruthenium(III). The utility of method was analyzed by separating the ruthenium(III) from binary mixture along with the base metals like Cu(II), Ag(I), Fe(II), Co(II), Bi(III), Zn(II), Ni(II), Se(IV), Te(IV), Al(III) and Hg(II) as well as platinum group metals (PGMs). Ruthenium(III) was also separated from ternary mixtures like Os(VIII), Pd(II); Pd(II), Pt(IV); Pd(II), Au(III); Pd(II), Cu(II); Fe(II), Cu(II); Ni(II), Cu(II); Co(II), Ni(II); Se(IV), Te(IV); Rh(III), Pd(II); Fe(III), Os(VIII). The stoichiometry 1: 2: 1 (metal: succinate: extractant) of the proposed complex was determined by slope analysis method by plotting graph of logD _[Ru(III)] versus logC _[2-OAP] and logD _[Ru(III)] versus logC _[succinate]. The interference of various cations and anions has been studied in detail and the statistical evaluations of the experimental results are reported. The method was successfully applied for the analysis of ruthenium in various catalysts, synthetic mixtures corresponding to the composition of alloys and minerals.     

Determination of platinum(IV) by UV spectrophotometry

A simple, rapid and sensitive spectrophotometric procedure for the determination of platinum has been elaborated. Pt traces were determined in the form of the PtCl(6)(2-) complex in hydrochloric acid solution whose concentration varies from 0.01 to 2 mol L(-1) by measuring the absorbance at 260 nm. The detection limit is 4.7 x 10(-7) mol L(-1), the linearity range from 2 x 10(-6) mol L(-1) to 7 x 10(-6) mol L(-1), and the correlation coefficient is r=0.9990. No significant interferences were observed from a majority of the investigated ions, such as Zn(II), Pb(II), Mn(II), Cd(II), Co(II) and Ni(II) with the exception of Cu(II), Sb(III), Fe(III), Pd(II), Sn(II) and I(-) ions. The method was successfully applied for the determination of Pt traces in different solid samples and the recovery from inorganic materials was studied.     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.