Simultaneous determination of NG‐monomethyl‐l‐arginine,NG,NG‐dimethyl‐l‐arginine,NG,NG′‐dimethyl‐l‐arginine,and l‐arginine using monolithic silica disk‐packed spin columns and a monolithic silica column

We have developed and validated a high‐performance liquid chromatography method that uses monolithic silica disk‐packed spin columns and a monolithic silica column for the simultaneous determination of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, and N^G,N^G′‐dimethyl‐l ‐arginine in human plasma. For solid‐phase extraction, our method employs a centrifugal spin column packed with monolithic silica bonded to propyl benzenesulfonic acid as a cation exchanger. After pretreatment, the methylated arginines are converted to fluorescent derivatives with 4‐fluoro‐7‐nitro‐2,1,3‐benzoxadiazole, and then the derivatives are separated on a monolithic silica column. l ‐Arginine concentration was also determined in diluted samples. Standard calibration curves revealed that the assay was linear in the concentration range 0.2–1.0 μM for methylated arginines and 40–200 μM for l ‐arginine. Linear regression of the calibration curve yielded equations with correlation coefficients of 0.999 (r²). The sensitivity was satisfactory, with a limit of detection ranging from 3.75 to 9.0 fmol for all four compounds. The RSDs were 4.3–4.8% (intraday) and 3.0–6.8% (interday). When this method was applied to samples from six healthy donors, the detected concentrations of N^G‐monomethyl‐l ‐arginine, N^G,N^G‐dimethyl‐l ‐arginine, N^G,N^G′‐dimethyl‐l ‐arginine and l ‐arginine were 0.05 ± 0.01, 0.41 ± 0.07, 0.59 ± 0.11, and 83.8 ± 30.43 μM (n = 6), respectively.     

Synthesis and characterization of polyamides containing octadecanedioic acid: Nylon‐2,18, nylon‐3,18, nylon‐4,18, nylon‐6,18, nylon‐8,18, nylon‐9,18, and nylon‐12,18

High‐aliphatic‐content linear nylons were produced with an 18‐carbon diacid with diamines containing both odd and even methylene segments. The resulting polymers were characterized with viscosimetric, thermal, and spectroscopic techniques. Solid‐state ¹⁵N NMR was used to determine the nylon crystalline form present. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 936–945, 2005     

A Novel Conversion of 2, 4‐Diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepines into 2, 4‐Diaryl‐3 H‐1, 5‐benzodiazepines

A novel conversion of 2, 4‐diaryl‐2, 3‐dihydro‐1 H‐1, 5‐benzodiazepins into 2, 4‐diaryl‐3 H‐1, 5‐benzodiazepines by the reaction with m‐chloroperbenzoic acid (MCPBA) was reported.     

2, 4‐Dimethylpenta‐1, 3‐dien‐ und 2, 4‐Dimethylpentadienyl‐Komplexe des Rhodiums und Iridiums

2, 4‐Dimethylpenta‐1, 3‐diene and 2, 4‐Dimethylpentadienyl Complexes of Rhodium and Iridium The complexes [(η⁴‐C₇H₁₂)RhCl]₂ ( 1 ) (C₇H₁₂ = 2, 4‐dimethylpenta‐1, 3‐diene) and [(η⁴‐C₇H₁₂)₂IrCl] ( 2 ) were obtained by interaction of C₇H₁₂ with [(η²‐C₂H₄)₂RhCl]₂ and [(η²‐cyclooctene)₂IrCl]₂, respectively. The reaction of 1 or 2 with CpTl (Cp = η⁵‐C₅H₅) yields the compounds [CpM(η⁴‐C₇H₁₂)] ( 3a : M = Rh; 3b : M = Ir). The hydride abstraction at the pentadiene ligand of 3a , b with Ph₃CBF₄ proceeds differently depending on the solvent. In acetone or THF the “half‐open” metallocenium complexes [CpM(η⁵‐C₇H₁₁)]BF₄ ( 4a : M = Rh; 4b : M = Ir) are obtained exclusively. In dichloromethane mixtures are produced which additionally contain the species [(η⁵‐C₇H₁₁)M(η⁵‐C₅H₄CPh₃)]BF₄ ( 5a : M = Rh; 5b : M = Ir) formed by electrophilic substitution at the Cp ring, as well as the η³‐2, 4‐dimethylpentenyl compound [(η³‐C₇H₁₃)Rh{η⁵‐C₅H₃(CPh₃)₂}]BF₄ ( 6 ). By interaction of 2, 4‐dimethylpentadienyl potassium with 1 or 2 the complexes [(η⁴‐C₇H₁₂)M(η⁵‐C₇H₁₁)] ( 7a : M = Rh; 7b : M = Ir) are generated which show dynamic behaviour in solution; however, attempts to synthesize the “open” metallocenium cations [(η⁵‐C₇H₁₁)₂M]⁺ by hydride abstraction from 7a , b failed. The new compounds were characterized by elemental analysis and spectroscopically, 4b and 5a also by X‐ray structure analysis.     

Synthesis,characterization, and crosslinking of methacrylate‐telechelic PDMAAm‐b‐PDMS‐b‐PDMAAm copolymers

The synthesis and molecular characterization of a new amphiphilic conetwork (APCN) designed for silicone hydrogel use is described. The synthesis strategy, outlined in Scheme 1 , calls for the preparation, by the RAFT technique, of a new methacrylate‐telechelic amphiphilic pentablock, MA‐PHEA‐b‐PDMAAM‐b‐PDMS‐b‐PDMAAm‐b‐PHEA‐MA, and its crosslinking to the target APCN. The sketch shows the architecture of the APCN (dotted lines, PDMAAm; solid lines, PDMS; clusters, MA‐based crosslinking sites; see Fig. 3 ). All six synthesis steps proceed smoothly and efficiently, and the products are optically clear, colorless membranes exhibiting properties appropriate for ophthalmic use. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4284–4290, 2007     

4,6‐Dinitro‐N,N′‐di‐n‐octylbenzene‐1,3‐diamine, 4,6‐dinitro‐N,N′‐di‐n‐undecylbenzene‐1,3‐diamine and N,N′‐bis(2,4‐dinitrophenyl)octane‐1,8‐diamine

4,6‐Dinitro‐N,N′‐di‐n‐octylbenzene‐1,3‐diamine, C₂₂H₃₈N₄O₄, (I), 4,6‐dinitro‐N,N′‐di‐n‐undecylbenzene‐1,3‐diamine, C₂₈H₅₀N₄O₄, (II), and N,N′‐bis(2,4‐dinitrophenyl)octane‐1,8‐diamine, C₂₀H₂₄N₆O₈, (III), are the first synthetic meta‐dinitroarenes functionalized with long‐chain aliphatic amine groups to be structurally characterized. The intra‐ and intermolecular interactions in these model compounds provide information that can be used to help understand the physical properties of corresponding polymers with similar functionalities. Compounds (I) and (II) possess near‐mirror symmetry, with the octyl and undecyl chains adopting fully extended anti conformations in the same direction with respect to the ring. Compound (III) rests on a center of inversion that occupies the mid‐point of the central C—C bond of the octyl chain. The middle six C atoms of the chain form an anti arrangement, while the remaining two C atoms take hard turns almost perpendicular to the rest of the chain. All three molecules display intramolecular N—H...O hydrogen bonds between the amine and nitro groups, with the same NH group forming a bifurcated intermolecular hydrogen bond to the nitro O atom of an adjacent molecule. In each case, these interactions link the molecules into one‐dimensional molecular chains. In (I) and (II), these chains pack so that the pendant alkyl groups are interleaved parallel to one another, maximizing nonbonded C—H contacts. In (III), the alkyl groups are more isolated within the molecular chains and the primary nonbonded contacts between the chains appear to involve the nitro groups not involved in the hydrogen bonding.     

Sulfenylation of heterocyclic 1,3‐dicarbonyl systems: 4‐Hydroxy‐2‐pyrones, 6‐hydroxy‐4‐pyrimidones, 4‐hydroxy‐2‐pyridones, 4‐hydroxy‐6‐pyridazinones,and 5‐hydroxy‐3‐pyrazolones

Anions of enolized heteroaromatic 1,3‐dicarbonyl systems, such as the title compounds 1, 9,14 , and 19 , react in dimethylformamide in the presence of potassium carbonate with diaryl disulfides 2 to yield arylsulfenyl derivatives ( 3, 10, 15, 20 ). The arylthiolate anions 4 formed in this reaction can be oxidized by air to yield the starting disulfides 2 again. Tetraalkylthiuram disulfides 7 react in the same manner to yield dialkylaminothiocarbonylthio derivatives ( 8, 13, 18 ) of the title compounds. Oxidation of the arylsulfenyl derivatives with hydrogen peroxide in sodium hydroxide solution usually leads to sulfoxides ( 5, 11, 16 ), whereas oxidation with peracetic acid affords sulfones ( 6, 12, 17 ).     

The monohydrates of the four polar dipeptides l‐seryl‐l‐asparagine,l‐seryl‐l‐tyrosine,l‐tryptophanyl‐l‐serine and l‐tyrosyl‐l‐tryptophan

The crystal structures of the four dipeptides l ‐seryl‐l ‐asparagine monohydrate, C₇H₁₃N₃O₅·H₂O, l ‐seryl‐l ‐tyrosine monohydrate, C₁₂H₁₆N₂O₅·H₂O, l ‐tryptophanyl‐l ‐serine monohydrate, C₁₄H₁₇N₃O₄·H₂O, and l ‐tyrosyl‐l ‐tryptophan monohydrate, C₂₀H₂₁N₃O₄·H₂O, are dominated by extensive hydrogen‐bonding networks that include cocrystallized solvent water molecules. Side‐chain conformations are discussed on the basis of previous observations in dipeptides. These four dipeptide structures greatly expand our knowledge on dipeptides incorporating polar residues such as serine, asparagine, threonine, tyrosine and tryptophan.     

Synthesis and Structure of a 2, 8, 9‐Trioxa‐3, 5, 7‐trisila‐1‐titanaadamantane

The title compound has been prepared from [Ti(η⁵‐C₅Me₅)Cl₃] and cis‐cis‐(t‐BuSi(OH)—CH₂)₃ in hexane solution in the presence of Et₃N. The pale yellow complex was characterized by NMR and MS spectra, as well as by a crystal structure determination. The two crystallographic independent molecules in the triclinic unit cell (space group P1¯, No. 2, Z = 4) both have a nearly identical adamantane‐like TiO₃Si₃C₃ cage of approximate C_3v symmetry. The exocyclic C—C—C bond angles in the Cp‐ligand range from 123° to 129°. A quantum chemical calculation of the free molecule predicts this range to be 124° to 127°. The arrangement of the molecules in the crystal is characteristic for an offset face‐to‐face ππ stacking of the aromatic η⁵‐C₅Me₅ rings.     

2,3,3a,4,5a,6,7,8‐Octa­hydro‐5a‐methyl‐6,9‐methano‐1H,9H‐5‐oxa‐4‐aza­cyclo­penta­[c]­indene

The regio‐ and stereochemistry of the title compound, C₁₂H₁₅NO, has been established by X‐ray analysis. The molecular dimensions are normal.     

A New Class of Organosuperbases,N‐Alkyl‐ and N‐Aryl‐1,3‐dialkyl‐4,5‐dimethylimidazol‐2‐ylidene Amines: Synthesis,Structure, pKBH+ Measurements,and Properties

A series of stable organosuperbases, N‐alkyl‐ and N‐aryl‐1,3‐dialkyl‐4,5‐dimethylimidazol‐2‐ylidene amines, were efficiently synthesized from N,N′‐dialkylthioureas and 3‐hydroxy‐2‐butanone and their basicities were measured in acetonitrile. The derivatives with tert‐alkyl groups on the imino nitrogen were found to be more basic than the tBu P₁ (pyrr) phosphazene base in acetonitrile. The origin of the high basicity of these compounds is discussed. In acetonitrile and in the gas phase, the basicity of the alkylimino derivatives depends on the size of the substituent at the imino group, which influences the degree of aromatization of the imidazole ring, as measured by ¹³C NMR chemical shifts or by the calculated ΔNICS(1) aromaticity parameters, as well as on solvation effects. If a wider range of imino‐substituents, including electron‐acceptor substituents, is treated in the analysis then the influence of aromatization is less predominant and the gas‐phase basicity becomes more dependent on the field‐inductive effect, polarizability, and resonance effects of the substituent.     

Safe,Low‐Cost,Fast‐Kinetics and Low‐Strain Inorganic‐Open‐Framework Anode for Potassium‐Ion Batteries

A key challenge for potassium‐ion batteries is to explore low‐cost electrode materials that allow fast and reversible insertion of large‐ionic‐size K⁺. Here, we report an inorganic‐open‐framework anode (KTiOPO₄), which achieves a reversible capacity of up to 102 mAh g^?1 (307 mAh cm^?3), flat voltage plateaus at a safe average potential of 0.82 V (vs. K/K⁺), a long lifespan of over 200 cycles, and K⁺‐transport kinetics ≈10 times faster than those of Na‐superionic conductors. Combined experimental analysis and first‐principles calculations reveal a charge storage mechanism involving biphasic and solid solution reactions and a cell volume change (9.5 %) even smaller than that for Li⁺‐insertion into graphite (≈10 %). KTiOPO₄ exhibits quasi‐3D lattice expansion on K⁺ intercalation, enabling the disintegration of small lattice strain and thus high structural stability. The inorganic open‐frameworks may open a new avenue for exploring low‐cost, stable and fast‐kinetic battery chemistry.     

Safe,Low‐Cost,Fast‐Kinetics and Low‐Strain Inorganic‐Open‐Framework Anode for Potassium‐Ion Batteries

A key challenge for potassium‐ion batteries is to explore low‐cost electrode materials that allow fast and reversible insertion of large‐ionic‐size K⁺. Here, we report an inorganic‐open‐framework anode (KTiOPO₄), which achieves a reversible capacity of up to 102 mAh g^?1 (307 mAh cm^?3), flat voltage plateaus at a safe average potential of 0.82 V (vs. K/K⁺), a long lifespan of over 200 cycles, and K⁺‐transport kinetics ≈10 times faster than those of Na‐superionic conductors. Combined experimental analysis and first‐principles calculations reveal a charge storage mechanism involving biphasic and solid solution reactions and a cell volume change (9.5 %) even smaller than that for Li⁺‐insertion into graphite (≈10 %). KTiOPO₄ exhibits quasi‐3D lattice expansion on K⁺ intercalation, enabling the disintegration of small lattice strain and thus high structural stability. The inorganic open‐frameworks may open a new avenue for exploring low‐cost, stable and fast‐kinetic battery chemistry.     

New Approach to N‐substituted‐1,2,3,6‐tetrahydro‐pyridine‐4‐carbaldehyde,a Precursor for Synthesizing Aricept®, Isoguvacine,and Deethylibophyllidine

A new route towards the synthesis of N‐substituted‐4‐formylpiperidine using N‐benzyl or tryptaminyl‐sulfonylacetamide and α,β‐unsaturated ester as starting materials is described. Formal synthesis of Aricept^®, deethylibophyllidine, and isoguvacine, which have potential biological activities, were synthesized via this strategy.     

Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Syntheses,Structure, Electrochemistry,and Optical Properties of 1,3‐Diethyl‐2,3‐dihydro‐1‐H‐1,3,2‐pyrido‐[4,5‐b]‐diazaboroles

Reaction of 2,5‐bis(dibromoboryl)thiophene ( 4 ) or 1,4‐bis(dibromoboryl)benzene ( 6 ) with two equivalents of N,N′‐dilithiated 2,3‐diaminopyridine ( 3 ) led to the generation of the pyridodiazaboroles 5 and 7 in which the two diazaborole rings are linked by 2,5‐thiophen‐diyl or 1,4‐phenylene units via the boron atom. The novel compounds were characterized by elemental analyses and spectroscopy (¹H‐, ¹¹B‐, ¹³C‐NMR, MS, and UV‐VIS). The molecular structure of 5 was elucidated by X‐ray diffraction. Cyclovoltammograms of 5 and 7 show two irreversible oxidation waves at 0.76 and 0.73 V, respectively vs Fc/Fc⁺. The novel compounds display intense blue luminescence with Stokes shifts of 76 and 74 nm and relative quantum yields of 39 and 43 % vs Coumarin 120 (Φ = 50 %).     

(3R,4aS,5R)‐3‐Hydro­xy‐5‐isopropenyl‐3,8‐di­methyl‐4,4a,5,6‐tetra­hydro‐2(3H)‐naphthalenone

In the crystal structure of C₁₅H₂₀O₂, mol­ecules are associated by intermolecular hydrogen bonds between the hydroxy function and a keto group [O?O 2.770 (2) Å], forming chains along the [100] direction in the crystal. Both six‐membered rings in the decalin unit adopt envelope conformations; one section of the mol­ecule, encompassing the extended conjugation of a C=C double bond with an enone functionality [C=C—C=O = 175.6 (2)° and C=C—C=C = 176.6 (2)°], is flat, whilst the rest of the mol­ecule is folded relative to the constrained part. The stereochemistry was determined from the R‐(–)‐carvone starting material.