Hydrogen production from bio-oil by chemical looping reforming

Hydrogen is a green energy carrier. Chemical looping reforming of biomass and its derivatives is a promising way for hydrogen production. However, the removal of carbon dioxide is costly and inefficient with the traditional chemical absorption methods. The objective of this article is to find a new material with low energy consumption and high capacity for carbon dioxide storage. A metal organic framework (MOF) material (e.g., CuBTC) was prepared using the hydrothermal synthesis method. The synthesized material was characterized by X-ray diffraction, ?196 °C N₂ adsorption/desorption isotherms, and thermogravimetry analysis to obtain its physical properties. Then BET, t-plot, and density functional theory (DFT) methods were used to acquire its specific surface area and pore textural properties. Its carbon dioxide adsorption capacity was evaluated using a micromeritics ASAP 2000 instrument. The results show that the decomposition temperature of the synthesized CuBTC material is 300 °C. Besides, high CO₂ adsorption capacity (4 mmol g^?1) and low N₂ adsorption capacity were obtained at 0 °C and atmospheric pressure. These results indicate that the synthesized MOF material has a high efficiency for CO₂ separation. From this study, it is expected that this MOF material could be used in adsorption and separation of carbon dioxide in chemical looping reforming process for hydrogen production in the near future.     

Synthesis of TiO2 Nanoparticles via a Ti（IV） Complex with Stearic Acid and the Photocatalytic Activity for Organic Oxidation

The nano-sized particles of TiO2 were prepared by thermal decomposition of titanium (IV) tetrabutanoxide complex with stearic acid at 450℃ in the air.It was observed that the amount of stearic acid,used initially for the complex synthesis in 2-propanol at 25℃,had great influence on the physical properties of the prepared TiO2 including crystal structure, the particle size,surface area and the adsorption capacity for organic substrate of a textile dye X3B in eater,and thereafter the photocatalytic activity for the dye oxidation.Some samples displayed lower adsorption capacity for the organic substrate in water than a TiO2 of Degussa p25,but higher photocatalytic activity for the organic oxidation.Possible reason for the observed difference was discussed in the text.     

Plasma Treated Sepiolite: A New Adsorbent for Removal of Malachite Green from Contaminated Water

Surface modification of clay materials has become an important issue to improve the efficiency of the adsorbent. The adsorption capacity of the clay material can be increased by thermal or chemical modifications. In this study, plasma technology was applied for the surface modification of sepiolite to improve the removal of malachite green from contaminated water. This study is novel in preparing and examining the effectiveness of sepiolite in adsorption of malachite green from contaminated water. To achieve the aim, plasma application time, CO₂, N₂, or Ar plasma gases effect and pH were investigated with respect to the adsorption capacity of MG. The surface properties of raw and plasma treated sepiolite were investigated with SEM, FTIR, BET surface area and XRD measurements. The monolayer adsorption capacity was found to be 143 mg/g.     

Azido chelating fiber: synthesis,characterization and adsorption performances towards Hg2+ and Pb2+ from water

Herein, we report the synthesis and adsorption property of a novel chelating fiber containing azido group. Firstly, the brominated fiber (PP‐St‐DVB‐Br) was obtained via the reaction of polypropylene‐(g)‐styrene‐divinylbenzene fiber (PP‐St‐DVB) with bromine in CH₂Cl₂ solution. Then, azido chelating fiber (PP‐St‐DVB‐N₃) was prepared by azidation of PP‐St‐DVB‐Br fiber. Its structure and properties were characterized by Fourier transform infrared, elemental analysis, thermogravimetric analysis, and chemical titration, respectively. The micromophology and functional group distribution in fibrous matrix were investigated by scanning electron microscopy‐energy dispersive spectroscopy. The results show that the chelating fiber has high functional group contents (2.11 mmol/g for PP‐St‐DVB‐N₃) and uniform distribution. Different from granulate chelating resin, the novel fibrous adsorbent possesses excellent adsorption ability for Hg(II) and Pb(II) ions (408.9 mg/g for Hg²⁺ and 334.4 mg/g for Pb²⁺), and the adsorption capacity of the fiber has no loss until five cycles. The novel absorbent material shows the potential application prospect in the treatment of heavy metal wastewater. Copyright © 2017 John Wiley & Sons, Ltd.     

From Adlayer Islands to Surface Alloy: Structural and Chemical Changes on Bimetallic PtRu/Ru(0001) Surfaces

The correlation between structural and chemical properties of bimetallic PtRu/Ru(0001) model catalysts and their modification upon stepwise annealing of a submonolayer Pt‐covered Ru(0001) surface up to the formation of an equilibrated Pt_xRu_1?x/Ru(0001) monolayer surface alloy was investigated by scanning tunneling microscopy and by the adsorption of CO and D₂ probe molecules. Both temperature‐programmed desorption and IR measurements demonstrate the influence of the surface structure on the adsorption properties of the bimetallic surface, which can be explained by changes of the composition of the adsorption ensembles (ensemble effects) for D adsorption and by changes in the electronic interaction (ligand effects, strain effects) of the metallic constituents for CO and D adsorption upon alloy formation.     

Nitromethane-water competitive adsorption over modified activated carbon

Modifications of texture and surface properties of a commercial activated carbon (Norit GF-40) were performed by several treatments in order to study their effects on the selective adsorption of nitromethane from nitromethane/water vapor mixtures. Characterisation of the samples by nitrogen adsorption and thermal analysis showed that HNO₃ treatments produce important losses of porosity and surface area, accompanied of an increase of oxygenated functional groups on the surface of carbon, which are progressively removed by heating at temperatures between 573 and 1073 K. All this leads to a drastic decrease of the adsorption capacity per gram of adsorbent with respect to the raw carbon, which offers, on the other hand, the best adsorptive performance. Oxidation by H₂O₂ does not practically affect its textural properties and introduces an important amount of oxygen functional groups at the surface, but changes in the adsorptive properties of carbon are insignificant. Sample oxidised by H₂O₂ and subsequently treated by diethylentriamine shows a decrease in adsorption capacity, without any relevant loss of surface area. The raw carbon treated at high temperature that exhibits the highest surface area and where surface functional groups are absent, showed the greatest adsorption capacity for nitromethane, being much more selective for nitromethane than for water, in nitromethane-water mixtures. Adsorption capacity values for nitromethane on the different samples are related to the extent of the surface area, while water vapour adsorption seems to depend on the population of functional groups at the surface, which may work as adsorption sites.     

Spray‐Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO‐66‐NCS MOF was formed by postsynthetic modification of UiO‐66‐NH₂. The UiO‐66‐NCS MOFs displays a circa 20‐fold increase in activity against the chemical warfare agent simulant dimethyl‐4‐nitrophenyl phosphate (DMNP) compared to UiO‐66‐NH₂, making it the most active MOF materials using a validated high‐throughput screening. The ?NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine‐terminated polypropylene polymers (Jeffamines) through a facile room‐temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray‐coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray‐coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

Stacking‐Layer‐Number Dependence of Water Adsorption in 3D Ordered Close‐Packed g‐C3N4 Nanosphere Arrays for Photocatalytic Hydrogen Evolution

Water adsorption capacity is a key factor to influence the photocatalytic H₂ evolution activity of polymeric g‐C₃N₄ . Herein, we report the synthesis of 3D ordered close‐packed g‐C₃N₄ nanosphere arrays (CNAs) that significantly enhance the water adsorption capacity. Through precisely controlling the average stacking‐layer number (ASLN) of the nanospheres in CNAs, we reveal an interesting stacking‐layer‐number dependence of water adsorption in the newly designed CNAs for accelerating the H₂ evolution reaction, which can be attributed to the differences in adsorption surface areas and adsorption sites endowed by the point‐defect cavities in sample CNAs.     

Ag on Pt(111): Changes in Electronic and CO Adsorption Properties upon PtAg/Pt(111) Monolayer Surface Alloy Formation

The electronic and chemical (adsorption) properties of bimetallic Ag/Pt(111) surfaces and their modification upon surface alloy formation, that is, during intermixing of Ag and Pt atoms in the top atomic layer upon annealing, were studied by X‐ray photoelectron spectroscopy (XPS) and, using CO as probe molecule, by temperature‐programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRRAS), respectively. The surface alloys are prepared by deposition of sub‐monolayer Ag amounts on a Pt(111) surface at room temperature, leading to extended Ag monolayer islands on the substrate, and subsequent annealing of these surfaces. Surface alloy formation starts at ≈600–650 K, which is evidenced by core‐level shifts (CLSs) of the Ag(3d_5/2) signal. A distinct change of the CO adsorption properties is observed when going to the intermixed PtAg surface alloys. Most prominently, we find the growth of a new desorption feature at higher temperature (≈550 K) in the TPD spectra upon surface alloy formation. This goes along with a shift of the CO_ad‐related IR bands to lower wave number. Surface alloy formation is almost completed after heating to 700 K.     

Hierarchical Microboxes Constructed by SnS Nanoplates Coated with Nitrogen‐Doped Carbon for Efficient Sodium Storage

The design and synthesis of hierarchical microboxes, assembled from SnS nanoplates coated with nitrogen‐doped carbon (NC) as an anode material for sodium‐ion batteries, is demonstrated. The template‐engaged multistep synthesis of the SnS@NC microboxes involves sequential phase transformation, polydopamine coating, and thermal annealing in N₂. The SnS@NC composite with two‐dimensional nano‐sized subunits rationally integrates several advantages including shortening the diffusion path of electrons/Na⁺ ions, improving electric conductivity, and alleviating volume variation of the electrode material. As a result, the SnS@NC microboxes show efficient sodium storage performance with high capacity, good cycling stability, and excellent rate capability.     

Probing the Electronic Effect of Carbon Nanotubes in Catalysis: NH3 Synthesis with Ru Nanoparticles

Carbon nanotubes (CNTs) have been shown to modify some properties of nanomaterials and to modify chemical reactions confined inside their channels, which are formed by curved graphene layers. Here we studied ammonia synthesis over Ru as a probe reaction to understand the effect of the electron structure of CNTs on the confined metal particles and their catalytic activity. The catalyst with Ru nanoparticles dispersed almost exclusively on the exterior nanotube surface exhibits a higher activity than the CNT‐confined Ru, although both have a similar metal particle size. Characterization with TEM, N₂ physisorption, H₂ chemisorption, temperature‐programmed reduction, CO adsorption microcalorimetry, and first‐principles calculations suggests that the outside Ru exhibits a higher electron density than the inside Ru. As a result, the dissociative adsorption of N₂, which is an electrophilic process and the rate‐determining step of ammonia synthesis, is more facile over the outside Ru than that over the inside one.     

Preparation of cross‐linked porous starch and its adsorption for chromium (VI) in tannery wastewater

Various cross‐linked amino starches were used for chromium (VI) adsorption in the environmental protection area. In order to improve chromium (VI) adsorption, the new cross‐linked amino starch with porous structure (CPS) was synthesized by reverse emulsion polymerization, using waxy corn starch after enzyme hydrolysis (ES) as raw material, N,N′‐methylene‐bis‐acrylamide (MBAA) as cross‐linking agent, and ceric ammonium nitrate as initiator. The effects of the volume ratio of oil phase/aqueous phase, the content of emulsifiers, ES, and MBAA on the swelling, solubility property, chromium (VI) adsorption capacity, grafting ratio, and conversion ratio of CPS were investigated. The properties and morphology of CPS have been characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis, differential scanning calorimetry, and scanning electron microscopy. The maximum adsorption capacity for chromium (VI) ions of CPS reached 28.83 mg/g when the synthesis condition of CPS was controlled as V_oil: V_H2O 8:1, emulsifier 9%, starch 2%, and MBAA 10%. The new adsorption peaks of CPS at 1641 cm^?1 and 1541 cm^?1 proved the cross‐linking reaction between ES and MBAA. The thermal decomposition temperature of CPS was improved to 250°C, and the gelatinization temperature and enthalpy value of CPS were decreased compared with ES because of the occurrence of the cross‐linking reaction. The CPS was like a sponge with a large amount of pores, and the size of these pores was 5 µm. CPS also exhibited superior adsorption property to other heavy metal ions such as cadmium (II) and lead (II) (17.37 and 35.56 mg/g). Copyright © 2015 John Wiley & Sons, Ltd.     

New 3 D Tubular Porous Structure of an Organic–Zincophosphite Framework with Interesting Gas Adsorption and Luminescence Properties

A new 3D tubular zinc phosphite, Zn₂(C₂₂H₂₂N₈)_0.5(HPO₃)₂?H₂O ( 1 ), incorporating a tetradentate organic ligand was synthesized under hydro(solvo)thermal conditions and structurally characterized by single‐crystal X‐ray diffraction. Compound 1 is the first example of inorganic zincophosphite chains being interlinked through 1,2,4,5‐tetrakis(imidazol‐1‐ylmethyl)benzene to form a tubular porous framework with unusual organic–inorganic hybrid channels. The thermal and chemical stabilities, high capacity for CO₂ adsorption compared to that for N₂ adsorption, and interesting optical properties of LED devices fabricated using this compound were also studied.     

A novel microwave assisted reverse micelle fabrication route for Th (IV)‐MOFs as highly efficient adsorbent nanostructures with controllable structural properties to CO and CH4 adsorption: Design,and a systematic study

Reducing gas contaminants by affordable and effective adsorbents is a major challenge in the 21^st century. In the present study, thorium metal organic framework (Th‐MOF) nanostructures are introduced as highly efficient adsorbents. These compounds were manufactured via a novel route resulting from the development of microwave assisted reverse micelle (MARM) and ultrasound assisted reverse micelle (UARM) methods. The products were characterized utilizing XRD, SEM, TGA/DSC, BET, and FT‐IR analyses. Based on the results, the samples synthesized by MARM had uniform size distribution, high thermal stability, and significant surface area. Calculations using DFT/B3LYP indicated that the compounds have a tendency to the polymeric form, which could theoretically confirm the formation of Th‐MOF. Results of analysis of variance (ANOVA) showed that synthesis parameters played a critical role in the manufacturing of products with distinctive properties. Response surface methodology (RSM) predicted the possibility of creating Th‐MOF adsorbents with the surface area of 2579 m²/g, which was a considerable value in comparison with the properties of other adsorbents. Adsorption studies showed that, in the optimum conditions, the Th‐MOF products had high adsorption capacity for CO and CH₄. It is believed that the synthesis protocol developed in the present study and the systematic studies conducted on the samples which lead to products with ideal adsorption properties.     

Surface morphology and active sites of TiO<Subscript>2</Subscript> for photoassisted catalysis

The main aim of this work is to discriminate the closely related adsorption and catalytic degradation processes that occur during a photocatalytic reaction. Very high-surface-area TiO₂ and Pd-doped TiO₂ were synthesized by microwave-assisted hydrothermal synthesis and used for degradation of methylene blue as a model pollutant dye. Thorough structural, morphological, and surface analyses of the synthesized catalysts were conducted to investigate key material properties that influence adsorption and catalytic performance. The adsorption capacity of the catalysts was determined by fitting adsorption data using the Langmuir isotherm model, and the photocatalytic activity of the synthesized samples was evaluated by periodically measuring the concentration of methylene blue as it was photocatalytically degraded under ultraviolet (UV) light. The results indicated that noble-metal incorporation compromised adsorption but favored catalytic performance.     

MOF‐5‐Polystyrene: Direct Production from Monomer,Improved Hydrolytic Stability,and Unique Guest Adsorption

An unprecedented mode of reactivity of Zn₄O‐based metal–organic frameworks (MOFs) offers a straightforward and powerful approach to polymer‐hybridized porous solids. The concept is illustrated with the production of MOF‐5‐polystyrene wherein polystyrene is grafted and uniformly distributed throughout MOF‐5 crystals after heating in pure styrene for 4–24 h. The surface area and polystyrene content of the material can be fine‐tuned by controlling the duration of heating styrene in the presence of MOF‐5. Polystyrene grafting significantly alters the physical and chemical properties of pristine MOF‐5, which is evident from the unique guest adsorption properties (solvatochromic dye uptake and improved CO₂ capacity) as well as the dramatically improved hydrolytic stability of composite. Based on the fact that MOF‐5 is the best studied member of the structure class, and has been produced at scale by industry, these findings can be directly leveraged for a range of current applications.     

MOF‐5‐Polystyrene: Direct Production from Monomer,Improved Hydrolytic Stability,and Unique Guest Adsorption

An unprecedented mode of reactivity of Zn₄O‐based metal–organic frameworks (MOFs) offers a straightforward and powerful approach to polymer‐hybridized porous solids. The concept is illustrated with the production of MOF‐5‐polystyrene wherein polystyrene is grafted and uniformly distributed throughout MOF‐5 crystals after heating in pure styrene for 4–24 h. The surface area and polystyrene content of the material can be fine‐tuned by controlling the duration of heating styrene in the presence of MOF‐5. Polystyrene grafting significantly alters the physical and chemical properties of pristine MOF‐5, which is evident from the unique guest adsorption properties (solvatochromic dye uptake and improved CO₂ capacity) as well as the dramatically improved hydrolytic stability of composite. Based on the fact that MOF‐5 is the best studied member of the structure class, and has been produced at scale by industry, these findings can be directly leveraged for a range of current applications.     

Synthesis of a molecularly imprinted polymer on mSiO2@Fe3O4 for the selective adsorption of atrazine

Atrazine contamination of water is of considerable concern because of the potential hazard to human health. In this study, a magnetic molecularly imprinted polymer for atrazine was prepared by the surface‐imprinting technique using Fe₃O₄ as the core, mesoporous silica as the carrier, atrazine as the template, and itaconic acid as the functional monomer. The magnetic molecularly imprinted polymer was characterized by Fourier‐transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, and vibration‐sample magnetometry. The binding properties of the magnetic molecularly imprinted polymer toward atrazine were investigated by adsorption isotherms, kinetics, and competitive adsorption. It was found that the adsorption equilibrium was achieved within 2 h, the maximum adsorption capacity of atrazine was 8.8 μmol/g, and the adsorption process could be well described by the Langmuir isotherm model and pseudo‐second‐order kinetic model. The magnetic molecularly imprinted polymer exhibited good adsorption selectivity for atrazine with respect to structural analogues, such as cyanazine, simetryne, and prometryn. The reusability of the magnetic molecularly imprinted polymer was demonstrated for at least five repeated cycles without a significant decrease in adsorption capacity. These results suggested that the magnetic molecularly imprinted polymer could be used as an efficient material for the selective adsorption and removal of atrazine from water samples.     

Review on recent advances of carbon based adsorbent for methylene blue removal from waste water

The growth in textile and printing industries proven detrimental to the aquatic environment as the industrial waste containing dye seeped into the ecosystem. A high concentration of dye in water possess negative impacts on water ecosystem and harmful to human health. Removal of methylene blue (MB) dye from industrial waste via adsorption pathway has been widely investigated that promised high efficiency of MB removal. This review will summarize researches published from 2008 to 2019 on the removal of MB using carbon adsorbent with focus will be given on the synthesis and modification of carbon-based materials, and the structural properties influencing the performance of MB adsorption. Summary on the type of material used for the synthesis of carbon materials (activated carbon and biochar) will be included from utilization of the naturally occurring carbon sources such as polymers, biomasses and biowastes, and also sucrose and hydrocarbon gases. Modification of carbon materials such as chemical activation and physical activation; surface grafting to form functionalized surfaces; deposition with metal and magnetic nanoparticles via impregnation; and manufacturing of carbon composites will be discussed on the effects to promote MB adsorption and desorption. Another type of carbon adsorbents such as porous carbon; graphitic carbons including graphite, graphene, graphene oxide, and carbon nitride (g-C₃N₄); and finally nanocarbon in the form of nanotube, nanorod and nanofiber; will be included in the review with details on the synthesis method and the correlation between structural properties and adsorption activity. The regeneration process to increase the life cycle of carbon adsorbent will also be discussed based on two regeneration pathway i.e. a thermal degradation and desorption on MB. Finally the thermodynamics, kinetics, and the adsorption models of MB on carbon adsorbent will be discussed in this review.     

Novel Sol–Gel Synthesis of Acidic MgF2−x(OH)x Materials

Novel magnesium fluorides have been prepared by a new fluorolytic sol–gel synthesis for fluoride materials based on aqueous HF. By changing the amount of water at constant stoichiometric amount of HF, it is possible to tune the surface acidity of the resulting partly hydroxylated magnesium fluorides. These materials possess medium‐strength Lewis acid sites and, by increasing the amount of water, Brønsted acid sites as well. Magnesium hydroxyl groups normally have a basic nature and only with this new synthetic route is it possible to create Brønsted acidic magnesium hydroxyl groups. XRD, MAS NMR, TEM, thermal analysis, and elemental analysis have been applied to study the structure, composition, and thermal behaviour of the bulk materials. XPS measurements, FTIR with probe molecules, and the determination of N₂/Ar adsorption–desorption isotherms have been carried out to investigate the surface properties. Furthermore, activity data have indicated that the tuning of the acidic properties makes these materials versatile catalysts for different classes of reactions, such as the synthesis of (all‐rac)‐[α]‐tocopherol through the condensation of 2,3,6‐trimethylhydroquinone (TMHQ) with isophytol (IP).