Preparation and characterization of poly (N-isopropylacrylamide)/polyvinylamine core-shell microgels

In this paper, well-defined temperature- and pH-sensitive core-shell microgels were synthesized by graft copolymerization in the absence of surfactant and stabilizer. The microgel particles consisted of poly (N-isopropylacrylamide (NIPAm)) core crosslinked with N, N′-methylene-bisacrylamide (MBA) and polyvinylamine (PVAm) shell. The effect of MBA content and NIPAm/PVAm ratio on microgel size was investigated. SEM showed that the microgels were spherical and had narrow particle-size distribution. TEM images of the microgels clearly displayed well-defined core-shell morphologies. Zeta-potential measurement further elucidated that the microgels possessed positively charged PVAm molecules on the microgel surface. Turbidity measurement and ¹H-nuclear magnetic resonance (NMR) experiments indicated that the VPTT of microgels was the same as the LCST of PNIPAm. ¹H-NMR experiments also inferred that the methyl proton of N-isopropylacrylamide appeared three peaks and responded to hydrogen-bonding interaction including polymer chain with water molecular, intramolecular interaction and intermolecular interaction, respectively.     

侧链含不同功能性羟基的温敏性N-异丙基丙烯酰胺共聚物微凝胶的制备及性能比较

选择含有活性羟基的亲水单体多缩乙二醇单甲基丙烯酸酯(PEGMA)、甲基丙烯酸羟乙酯(HEMA),分别和N-异丙基丙烯酰胺(NIPAM)交联共聚,制备了侧链含有功能性羟基、链长不同的温敏性微凝胶.研究发现,亲水单体HEMA和PEGMA的引入对微凝胶的去溶胀性能有不同的影响,PEGMA的引入使得微凝胶的体积相转变温度升高,微凝胶的去溶胀比随着PEGMA投料比的增加而降低.而HEMA的引入使得微凝胶的体积相转变温度降低;微凝胶的去溶胀比随着HEMA投料比的增加先是增加然后降低,当HEMA的投料比为8mol%时,去溶胀比达到最大.     

Copolymeric nano/microgels of N-isopropylacrylamide and carboxyalkyl methacrylamides: Effect of methylene chains and the ionization state of the weak acids on size and sensitivity to pH and temperature

ABSTRACT

We prepared nano/microgels by precipitation copolymerization of N-isopropylacrylamide (NIPAAm), and one of three different carboxyalkyl methacrylamides [methacryloylamido hexanoic acid (M₅), 8-methacryloylamido octanoic acid (M₇), and 11-methacryloylamido undecanoic acid (M₁₀)], either in the acid forms or as carboxylates (potassium salts). The hydrodynamic diameter (Dh) of the nano/microgels prepared with the carboxylates was smaller (≈100 nm for M₁₀ copolymers), compared to the size of homopolymeric NIPAAm microgels prepared by dispersion polymerization (around 600 nm), indicating that the carboxylates act as surfactants reducing the size of the seeds during the polymerization process. These materials presented a swollen-shrunken transition temperature (T _tr) similar to the T _tr of the homopolymeric NIPAAm microgels, without pH sensitivity. On the other hand, the copolymeric microgels prepared from the acid form of the comonomers have a similar or bigger size than NIPAAm microgels. For these copolymers, the T _tr can be tuned by the type and proportion of acid comonomer used and present pH sensitivity. This is important for biomedical applications such as positive temperature control release. Polyelectrolyte titration demonstrates that the nano/microgels prepared with the carboxylates behave as hard spheres, while the microgels prepared with the weak acid behave as porous materials.     

Synthesis and mass cytometric analysis of lanthanide-encoded polyelectrolyte microgels

This article describes the synthesis and characterization of two series of functional polyelectrolyte copolymer microgels intended for bioassays based upon mass cytometry, a technique that detects metals by inductively coupled plasma mass spectrometry (ICP-MS). The microgels were loaded with Eu(III) ions, which were then converted in situ to EuF(3) nanoparticles (NPs). Both types of microgels are based upon copolymers of N-isopropylacrylamide (NIPAm) and methacrylic acid (MAA), poly(NIPAm/VCL/MAA) (VCL = N-vinylcaprolactam, V series), and poly(NIPAm/MAA/PEGMA) (PEGMA = poly(ethylene glycol)methacrylate, PG series). Very specific conditions (full neutralization of the MAA groups) were required to confine the EuF(3) NPs to the core of the microgels. We used mass cytometry to measure the number and the particle-to-particle variation of Eu ions per microgel. By controlling the amount of EuCl(3) added to the neutralized microgels. we could vary the atomic content of individual microgels from ca. 10(6) to 10(7) Eu atoms, either in the form of Eu(3+) ions or EuF(3) NPs. Leaching profiles of Eu ions from the hybrid microgels were measured by traditional ICP-MS.     

多层核-壳结构P(AM-co-MAA)/W/UF复合微球制备研究

以反相悬浮聚合技术合成的丙烯酰胺(acrylamide,AM)和甲基丙烯酸(methacrylic acid,MAA)共聚高分子微凝胶P(AM-co-MAA)为模板,通过离心沉积法将微米级钨粉沉积于高分子微凝胶表面,得到具有核-壳结构的P(AM-co-MAA)/W复合微球材料;再以P(AM-co-MAA)/W复合微球为模板,通过控制甲醛和尿素的缩聚反应在模板与油/水相界面进行,制备得到了具有多层核-壳结构的高分子/钨/脲醛树脂[P(AM-co-MAA)/W/Urea-formaldehyde resin]复合微球材料.利用扫描电子显微镜(SEM)、红外(FT-IR)、X射线衍射(XRD)和热分析(TGA)等手段对复合微球进行了表征.实验结果表明,外壳层脲醛树脂的包覆量、复合微球的表面形貌可通过改变甲醛和尿素溶液的浓度、甲醛和尿素的物质的量之比等因素进行控制.复合微球的导电性测试结果表明,P(AM-co-MAA)/W复合微球表面壳层脲醛树脂包覆前后,其电导率由1.9×10-3降低为0.9×10-8S·m-1.该研究获得的三层核-壳复合微球材料其外层脲醛树脂的包覆较为完整、致密,其导电性接近于绝缘材料,为含钨复合微球作为电子元件的抗辐射涂层材料打下了基础.     

反相微乳液聚合法制备聚(丙烯酰胺-co-丙烯酸)pH敏感微凝胶及其性能

以丙烯酰胺(AM)和丙烯酸(AA)单体的水溶液为分散相,失水山梨醇单油酸脂(Span80)/聚氧乙烯失水山梨醇脂肪酸脂(Tween80)/异辛烷为分散介质,分别以N,N′-亚甲基双丙烯酰胺(MBA)、过硫酸铵/亚硫酸氢钠((NH4)2S2O8/NaHSO3)为交联剂和氧化还原引发剂,在30℃进行反相微乳液聚合制备了一系列不同单体摩尔百分数的P(AM-co-AA)微凝胶.通过傅立叶红外光谱、浊度法、透射电镜(TEM)和动态光散射(DLS)等测试手段分别对微凝胶特征官能团的存在、pH敏感性、微观形态、粒径大小及粒径分布等进行表征分析.结果表明,共聚物中存在AM和AA结构单元;样品的TEM照片显示在原料中AA的摩尔百分数为60%时,P(AM-co-AA)微凝胶粒子的数均粒径为90 nm左右,呈现非规则球形;DLS结果表明,P(AM-co-AA)微凝胶与PAM微凝胶相比具有较宽的粒径分布,且随原料中AA摩尔百分数增加,粒径分布逐渐变宽;P(AM-co-AA)微凝胶具有良好的pH敏感性,敏感pH值与AA的解离常数有关,通过调节pH值可以迅速控制自身体积的溶胀与收缩.     

Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels

Emulsion copolymerization of poly(methacrylic acid) and poly(2-(diethylamino)ethyl methacrylate) (PMAA/PDEA) yielded pH-responsive polyampholyte microgels of 200-300 nm in diameter. These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH, but formed large aggregates of approximately 2500 nm at intermediate pH. To achieve colloidal stability at intermediate pH, a second batch of microgels of identical monomer composition were synthesized, where monomethoxy-capped poly(ethylene glycol)methacrylate (PEGMA) was grafted onto the surface of these particles. Dynamic light-scattering measurements showed that the hydrodynamic radius, Rh, of sterically stabilized microgels was approximately 100 nm at intermediate pH and increased to 120 and 200 nm at pH 2 and 10, respectively. Between pH 4 and 6, these microgels possessed mobility close to zero and a negative second virial coefficient, A2, due to overall charge neutralization near the isoelectric pH. From the Rh, mobility, and A2, cross-linked MAA-DEA microgels with and without PEGMA retained their polyampholytic properties in solution. By varying the composition of MAA and DEA in the microgel, it is possible to vary the isoelectric point of the colloidal particles. These new microgels are being explored for use in the delivery of DNA and proteins.     

Ag Nanocomposite Particles: Preparation,Characterization and Application

Summary Herein, we report that different core-shell particles could be successfully used as the carrier systems for the deposition of silver nanoparticles. Firstly, thermosensitive core-shell microgel particles have been used as the carrier system for the deposition of Ag nanoparticles, in which the core consists of poly (styrene) (PS) whereas the shell consists of poly (N-isopropylacrylamide) (PNIPA) network cross-linked by N, N′-methylenebisacrylamide (BIS). Immersed in water the shell of these particles is swollen. Heating the suspension above 32 °C leads to a volume transition within the shell, which is followed by a marked shrinking of the network of the shell. Secondly, “nano-tree” type polymer brush can be used as “nanoreactor” for the generation of silver nanoparticles also. This kind of carrier particles consists of a solid core of PS onto which bottlebrush chains synthesized by the macromonomer poly (ethylene glycol) methacrylate (PEGMA) are affixed by “grafting from” technique. Thirdly, silver nanoparticles can be in-situ immobilized onto polystyrene (PS) core-polyacrylic acid (PAA) polyelectrolyte brush particles by UV irradiation. Monodisperse Ag nanoparticles with diameter of 8.5 nm, 7.5 nm and 3 nm can be deposited into thermosensitive microgels, “nano-tree” type polymer brushes and polyelectrolyte brush particles, respectively. Moreover, obtained silver nano-composites show different catalytic activity for the catalytic reduction of p-nitrophenol depending on the carrier system used for preparation.     

Functional group distributions in carboxylic acid containing poly(N-isopropylacrylamide) microgels

Control of the functional group distribution is of fundamental importance in the design of functional polymer particles, particularly in biological applications. Surface-functionalized particles are useful for bioconjugation and medical diagnostics, while internally functionalized particles may have applications in drug delivery. We have prepared a series oftemperature-sensitive poly(N-isopropylacrylamide) (PNIPAM)-based microgels containing carboxylic acid functional groups via copolymerization with methacrylic acid and acrylamide, which was selectively hydrolyzed under optimized conditions to generate the carboxylic acid functionality. The resulting microgels were analyzed using conductometric and potentiometric titration, dynamic light scattering, and electrophoresis. Acrylamide-containing microgels hydrolyzed below the volume phase transition temperature (VPTT) show broad particle size versus temperature profiles, relatively low electrophoretic mobilities at basic pH, and time-dependent base titration profiles, suggesting the presence of internal functional groups whose titration is diffusion-controlled. Methacrylic acid containing microgels show sharper particle size versus temperature profiles, higher electrophoretic mobilities at basic pH, and time-independent base titration profiles, suggesting the presence of a "core-shell" structure with primarily surface functionalization. Similar results were obtained when acrylamide-containing microgels were hydrolyzed at temperatures above the VPTT. Thus, through selection of comonomer and hydrolysis conditions, we have developed strategies to control and characterize the number and distribution ofcarboxylic acid functional groups in PNIPAM-based microgels.     

Temperature-Responsive Poly(N-Isopropylacrylamide-Acrylamide-Phenylboronic Acid) Microgels for Stabilization of Silver Nanoparticles

Poly(N-isopropylacrylamide-acrylamide-phenylboronic acid) [P(NIPAM-AAm-PBA)] microgels of uniform size were prepared by the chemical reaction of 3-aminophenylboronic acid with poly(N-isopropylacrylamide-acrylamide-acrylic acid) [P(NIPAM-AAm-AA)] microgels in aqueous medium in the presence of N-(3-dimethylaminopropyl)-N-ethylcarbodiimide hydrochloride catalyst via carbodiimide coupling. Silver (Ag) nanoparticles were prepared using seed-mediated growth method and stabilized in P(NIPAM-AAm-PBA)] microgels. Ag nanoparticles and hybrid microgels were characterized by transmission electron microscopy, UV–visible, and dynamic light scattering techniques. The temperature-responsive behavior of hybrid microgels was found to be similar to that of the pure microgels. The value of volume transition temperature of hybrid microgels was found to be slightly higher than that of pure microgels due to shielding effect of Ag nanoparticles present on the surface of microgel particle. The decrease in the size of hybrid microgels as compared to that of pure microgels in swollen state is due to physical cross-linking by Ag nanoparticles inside the network of microgels. The stable hybrid polymer microgel system has a potential to be used for different applications.     

Poly(PEGMA) magnetic nanogels: preparation via photochemical method,characterization and application as drug carrier

One-pot synthesis of magnetic nanogels with excellent biocompatibility via the photochemical method is reported in this paper. Poly(PEGMA) modified superparamagnetic nanogels (poly(PEGMA) magnetic nanogels) were synthesized by in-situ polymerization using poly(ethylene glycol) methacrylate (PEGMA) as the monomer and N, N′-methylene-bis-(acrylamide) (MBA) as the cross-linking agent in magnetite aqueous suspension under UV irradiation. The surface functional groups and components of magnetic nanogels were analyzed by Fourier transform infrared spectroscopy (FTIR) and a thermogravimetric analyzer (TGA). The results indicated that the poly(PEGMA) magnetic nanogels were synthesized successfully by coating poly(PEGMA) on the Fe₃O₄ nanoparticles under UV irradiation, and the Fe₃O₄ nanoparticles content in this nanogels was above 50 wt%. The morphology, size, zeta-potential and magnetic property were also characterized. The magnetic nanogels had a nearly spherical shape and core-shell structure, the average size in aqueous system measured by photon correlation spectroscopy (PCS) was 68.4 nm, which was much bigger than that in the dry state, the nanogels behaved superparamagnetically with saturated magnetization of 58.6 emu/g, and the zeta-potential was −16.3–−17.3 mV at physiological pH (6.8–7.4) which could help to maintain stability in blood. The preliminary application as drug carrier was made and the doxorubicin-loaded magnetic nanogels had an excellent property in slow-release. The experiment indicated that the magnetic nanogel was an ideal candidate carrier in target drug delivery systems and other biomedical application. Supported by the Natural Science Foundation of Shandong Province (Grant No. Q2006F01), Scientific and Technological Project of Shandong Province (Grant No. 2007GG3WZ02066) and Scientific and Technological Project of Department of Education, Shandong (Grant No. J07WC01)     

Microwave, photo- and thermally responsive PNIPAm-gold nanoparticle microgels

Microwave-, photo- and thermo-responsive polymer microgels that range in size from 500 to 800 microm and are swollen with water were prepared by a novel microarray technique. We used a liquid-liquid dispersion technique in a system of three immiscible liquids to prepare hybrid PNIPAm- co-AM core-shell capsules loaded with AuNPs. The spontaneous encapsulation is a result of the formation of double oil-in-water-in-oil (o/w/o) emulsion. It is facilitated by adjusting the balance of the interfacial tensions between the aqueous phase (in which a water-soluble drug may be dissolved), the monomer phase and the continuous phase. The water-in-oil (w/o) droplets containing 26 wt% NIPAm and Am monomers, 0.1 wt% Tween-80 surfactant, FITC fluorescent dye and colloidal gold nanoparticles spontaneously developed a core-shell morphology that was fixed by in situ photopolymerization. The results demonstrate new reversibly swelling and deswelling AuNP/PNIPAm hybrid core-shell microcapsules and microgels that can be actuated by visible light and/or microwave radiation (相似文献   

Preparation of stimuli-responsive nanogels based on poly(N,N-diethylaminoethyl methacrylate) by a simple “surfactant-free” methodology

The synthesis of poly(N,N-diethylaminoethyl methacrylate)-core-polyethyleneglycol-shell (PDEAEM-core-PEG-shell) nanogels was achieved by using a “surfactant-free” emulsion polymerization with the aid of commercially available polyethyleneglycol methyl ether methacrylates (PEGMAs) as polymerizable stabilizers. By adjusting the synthetic parameters like the choice of initiator, cross-linker, PEGMA:DEAEM ratio, and molecular weight of PEGMA, a series of core-shell nanogels varying in size (50–350 nm), PDEAEM content, and pH/temperature responsive behavior were obtained in reactions taking only 60 min. The nanogels were used as nanoreactors for the preparation of gold nanoparticles. The PEGylated nanogels have a great potential to be used for diagnosis and therapy.     

Deswelling comparison of temperature‐sensitive poly(N‐isopropylacrylamide) microgels containing functional ?OH groups with different hydrophilic long side chains

Two monomers containing functional ? OH groups with different hydrophilic long side chains (viz., triethyleneglycol methacrylate (TREGMA) and polyethyleneglycol methacrylate (PEGMA)) were selected to modify the swelling/deswelling behavior of poly(N‐isopropylacrylamide) (pNIPAM) microgels. Dynamic scattering technique, turbidimetric method, and differential scanning calorimetry (DSC) were employed to investigate the deswelling behavior of the microgels. Experimental results show that the two series of microgels are identical in that incorporation of hydrophilic chains containing ? OH groups causes the volume‐phase transition temperature (VPTT) of pNIPAM microgels to shift to higher temperature; the more hydrophilic the side chains, the more the VPTTs shift. Although PEGMA are more effective in elevating the VPTTs of pNIPAM microgels than TREGMA, p(NIPAM‐co‐TREGMA) microgels show better deswelling properties than p(NIPAM‐co‐PEGMA) microgels, i.e., they have much larger deswelling ratios (α) and display less continuous volume‐phase transition. The VPTTs of the modified microgels can be modulated to well close to the normal body temperature of human beings. These characteristics along with the functional ? OH groups they contain make the microgels competitive candidates for biomaterials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3575–3583, 2005     

A Novel Route to the Preparation of Poly(N‐isopropylacrylamide) Microgels by Using Inorganic Clay as a Cross‐Linker

Adopting inorganic clay (hectorite) and MBA as physical and chemical cross‐linking agents, respectively, PNIPAM microgels were synthesized by SFEP. The chemical structure and morphology of the microgels were confirmed by FTIR, WXRD, and SEM. The temperature‐sensitivity of the microgels was investigated by DLS and UV spectrophotometers. The results inferred that clay platelets dispersed in an aqueous medium were fully exfoliated and could act as a kind of multifunctional cross‐linking agent and significantly reduced the hydrodynamic diameters of the microgels. In fact, the hydrodynamic diameters of the PNIPAM microgels with clay as cross‐linker ranged from 154 to 322 nm which was much smaller than that using MBA as chemical cross‐linker, the later was in the range of 284–808 nm on heating from 5 to 50 °C.

     

Preparation of PEGMA-functionalized latex particles. 1. System styrene/PEGMA

Polymeric particles have been prepared by emulsion polymerization of styrene in presence of poly(ethylene glycol) methacrylate (PEGMA). The influence of the functional monomer concentration on the particle size and particle size distribution was studied. Obtained particles show dramatic change of size with temperature. This thermal sensitivity can be influenced by the amount of the PEGMA grafted onto the particle surface as well as by the presence of crosslinking agents in the reaction mixture. It is assumed that particles have a core-shell structure and the brush-like PEGMA-rich shell layer induces the collapse at elevated temperatures.     

Water-swellable polyelectrolyte microgels polymerized in an inverse microemulsion using a nonionic surfactant

A series of poly(dimethylacrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid) microgels slightly crosslinked by methylene-bis-acrylamide (MBA) were polymerized in a novel inverse microemulsion polymerization (IMEP) system. To determine a suitable composition of the IMEP system, the phase diagram of a pseudoternary system was made. The pseudoternary polymerization system consisted of n-hexane, a nonionic surfactant (polyoxyethylene oleyl ether, C18En), and an aqueous monomer solution. Polymerization was performed in a single-phase reversed micelle solution. The reversed micelles were about 50 nm in diameter, as determined by FF-TEM. The viscometric characteristics of the polymers extracted from the IMEP system were studied in 3 mM sodium chloride aqueous solution. The intrinsic viscosity values for the noncrosslinked and crosslinked (0.1 mol% MBA was incorporated) samples were 25 and 7.4 dl/g, respectively. The overlap concentration (c*) of crosslinked polymer microgel occurred at c[eta] = 1 in the solvent. When the volume fraction (phi) of the microgel was 0.7, the value of the apparent yield stress of the microgel solution was observed. These results show that the microgel has a significant thickening effect above c* due to friction between the microgel particles. It is assumed that the microgels polymerized in a confined space retain the shape or size of the nanosized reactor with a diameter on the order of 50 nm.     

Preparation and characterization of novel cationic pH-responsive poly(N,N'-dimethylamino ethyl methacrylate) microgels

Novel monodisperse cationic pH-responsive microgels were successfully prepared by dispersion polymerization in ethanol/water mixture using N,N'-dimethylamino ethyl methacrylate (DMAEMA) as the monomer, poly(vinyl pyrrolidone) (PVP) as the steric stabilizer and N,N'-methylenebisacrylamide (MBA) as the cross-linker. The effects of various polymerization parameters, such as medium polarity, concentration of cross-linker, concentration of monomer, and concentration and molecular weight of stabilizer on the final diameter and monodispersity of poly(N,N'-dimethylamino ethyl methacrylate) (PDMAEMA) microgels were systematically studied. The pH-responsive characteristics of PDMAEMA microgels were also investigated. The experimental results showed that these microgels exhibited excellent pH-responsivity and significantly swelled at low pH values. The maximum ratio of volume change of the prepared microgels in response to pH variation was more than 11 times. It was found that the prepared microgels completely aggregated at the isoelectric point (IEP) around pH 6. On the other hand, the microgels were stable in aqueous solution at both low and high pH values. The results can be used for effectively controlled separation of particles.     

负载金纳米粒子的聚苯乙烯/聚丙烯酸微球的合成及pH响应性能

以两步聚合法合成的聚苯乙烯(PS)/聚丙烯酸(PAA)核-壳结构复合微凝胶为载体, 硼氢化钠为还原剂, 柠檬酸钠为稳定剂, 通过原位控制性还原获得pH敏感性微凝胶负载纳米金粒子的PS/PAA-Au复合材料. 研究发现, 不同酸碱条件时, 复合微凝胶壳层高分子链的溶胀/收缩变化, 不仅可以调节纳米金粒子的表面等离子吸收, 还可以调节反应底物的扩散传质, 即借助载体微环境的变化来调控纳米金光学性能和催化性能, 从而实现复合纳米金材料的pH调控性.     

Preparation of PEGMA-functionalized latex particles. 2. System styrene/<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam

In a previous paper [Pich A, Lu Y, Adler H-J (2003) Colloid Polym Sci (submitted)], the synthesis of polystyrene-poly(ethylene glycol) methacrylate (PST/PEGMA) particles has been described. In the present paper polymeric particles have been prepared by emulsion co-polymerization of styrene/N-vinylcaprolactam (ST/VCL) or styrene/n-butylacrylate (ST/BA) mixtures in presence of poly(ethylene glycol) methacrylate (PEGMA). The influence of the monomer composition and PEGMA concentration on the particle size and particle size distribution was studied. Increase of VCL content in reaction mixture leads to dramatic increase of the final particle size. Particle size distribution becomes broader at higher VCL contents. Poly(ST/VCL) particles show dramatic change of the size with the temperature.