Synthesis of Substituted Phenyl Esters of Amino Acids and Polycondensation in Langmuirblodgett Films

Long-alkyl-chain phenyl esters of β-alanine, glycine, and L-valine were prepared, and their monolayer properties were correlated with their molecular structures. These compounds formed stable monolayers on acidic subphases. In particular, the p-hexadecylphenyl esters of β-alanine and glycine were remarkably stable, and their monolayers could be deposited on calcium fluoride plates as Y-type film by Blodgett's technique. The polycondensation of multilayers under an atmosphere saturated with triethylamine was investigated by changes in the IR spectra. It was determined that the polycondensation proceeded by a first-order reaction mechanism in the initial stage and that the rate in multilayers was faster than that in the bulk crystalline powder. These results suggest that the polycondensation is accelerated by a regular arrangement of the monomer in the multilayers, where the active sites are concentrated and located better for the polycondensation. In the case of the polycondensation in multilayers of the glycine ester, two kinds of condensation proceeded to afford poly(glycine) and 2,5-piperazinedione.     

Spontaneous formation of polypeptides in the interfacial thin films of amphiphilic amino acid esters: acceleration of the polycondensation and control of the structure of resultant polymers

For the purpose of elucidating the effects of molecular arrangements on the reaction rates and the structure of products, polycondensation of long-chain esters of alpha-amino acids in the monolayer on the water surface and the LB multilayers deposited on CaF2 plates were investigated by monitoring changes of the IR spectra. Spontaneous formation of the polypeptides occurs in the mono- and multilayers at room temperature without any catalyst. The rates of polycondensation in the monolayers are markedly influenced by the degree of molecular packing. Maximum polymerizability is obtained in the vicinity of the transition region from expanded to condensed films. The rates of polycondensation in the LB films are much higher than those in the bulk solids and the molten states. The polycondensation seems to be accelerated by regular arrangements of the monomer molecules in the LB films, where the functional groups are concentrated and situated more effectively for the reaction than in the bulk states. However, the polycondensation rates in the LB films are considerably slower when compared with those in the monolayers on the water surface kept at the optimum area or surface pressure, because the molecules in the LB films deposited under high compression are packed more closely than the optimum condition. Thus, suitably close packing of the monomer molecules, retaining a particular orientation together with some conformational freedom in the monolayer, is most favorable for the polycondensation. Two probable mechanisms for the polycondensation in the Y-type multilayers have been proposed. In the assembly of head-to-head double layers of the monomer molecules, the interlayer reaction propagates by sewing up the functional groups facing each other in the adjacent layers, and the polypeptide of a helical structure or random coil can be obtained. In contrast, for the alternating assembly of the amino acid ester and non-polymerizable octadecyl acetate, the polycondensation should proceed only in each single layer (intralayer reaction) and the polypeptide of the extended beta-form can be formed. In the case of dioctadecyl glutamate LB films, as well as the monolayer on water, the resultant polypeptide is the comb-like polymer with unreacted long-alkyl ester groups as side chains and abundant in the beta-form, indicating the dominant intralayer reaction. On the other hand, in the Y-type multilayer of the equimolar mixture of dioctadecyl glutamate (with two ester groups) and octadecyl ester of lysine (with two amino groups), both of the intra- and interlayer reactions occur effectively, resulting in a two-dimensional network structure of the polypeptide. In conclusion, not only the rate of polycondensation but also the higher-order structure of the resultant polypeptides can be controlled by organized arrangements of the monomer molecules in the interfacial thin films.     

Synthesis of cyclic aromatic polymer containing thiophene or pyridine by means of unstoichiometric Suzuki-Miyaura cyclic polycondensation: Effect of the position of bromine of heteroarylenes on cyclic polycondensation

Suzuki-Miyaura cyclic polycondensation of 1.3 equivalents of thiophene dibromide or pyridine dibromide with 1.0 equivalent of phenylenediboronic acid ester was investigated in the presence of t-Bu₃PPd G2 precatalyst, which generates t-Bu₃PPd(0), and CsF/18-crown-6 as a base. Polycondensation of 2,5-dibromothiophene and 5,5′-dibromo-2,2′-bithiophene with pinacol meta-phenylenediboronate ( 2 ) yielded corresponding cyclic polymers. On the other hand, polycondensation of 3,4-dibromothiophene with para-phenylenediboronate ( 5 ) gave linear polymer with bromothiophene at both ends via conventional unstoichiometric polycondensation involving excess dibromo monomer, implying that intramolecular catalyst transfer did not proceed effectively on 3,4-dibromothiophene. A model reaction of 3,4-dibromothiophene with phenylboronic acid indeed gave monosubstituted thiophene preferentially via intermolecular catalyst transfer. In the polycondensation of excess pyridine dibromide with 5 , the use of 2,6-dibromopyridine gave linear polymer, whereas the use of 3,5-dibromopyridine yielded cyclic polymer. Thus, the position of bromine in heteroarylenes determines whether cyclic polymer or linear polymer is formed, in contrast to the case of unstoichiometric Suzuki-Miyaura cyclic polycondensation with dibromophenylenes.     

Fluorine containing poly(amide-imide)s: synthesis and formation of Langmuir-Blodgett monolayers

Soluble fluorine containing poly(amide-imide)s, PAI(1-4), were synthesized from diimide-dicarboxylic acid, 2,2-bis[N-(4-carboxyphenyl)-phthalimide-1,4-yl]hexafluoropropane with various diamines by direct polycondensation in N-methyl-2-pyrrolidone (NMP) containing CaCl₂ and using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in aprotic polar solvents such as NMP, N,N-dimethylacetamide, dimethyl sulfoxide and tetrahydrofuran. Their Langmuir monolayers were studied at the air/water interface. The monolayers were generally stable at the water surface and could be reproducibly transferred onto solid substrates to build up Langmuir-Blodgett (LB) multilayers. The LB mono- and multilayers were characterized by ultra-violet/visible spectroscopy (UV-Vis), surface plasmon resonance, atomic force microscopy.     

Polymerization in the crystalline state. X. Solid-state conversion of 6-aminocaproic acid to oriented nylon 6

When single crystals of 6-aminocaproic acid (ACA) are heated about 30°C below their melting point, polycondensation to nylon 6 takes place. The polymer crystallites are biaxially oriented towards each other and the relation between their orientation and that of the parent monomer crystal has been clarified. The kinetics of the process are characterized by three stages, (a) an induction period, (b) a stage in which monomer disappears at a constant rate while polymer of relatively low molecular weight is formed, and (c) a slow polycondensation of the polyamide chains after exhaustion of the monomer. Oligomer concentrations were below detectable limits at all stages of the process. Addition of monomer to the polyamide was retarded when ACA was kept from reaching its equilibrium vapor pressure (0.12 mm Hg at 170°C) by condensation on a cool surface or when an inert gas was admitted to the system. This was interpreted as suggesting that ACA is transported through the vapor phase to the propagating polyamide. A number of surfaces catalyzed the polycondensation of ACA vapor, but nylon 6 formed in this way on KCl crystals exhibited no preferred orientation. The linear dimer and trimer of ACA were also found to condense to nylon 6 in the crystalline state, although at a slower rate than the monomer. The solid-state polycondensation of these oligomers was accelerated when they were exposed to the vapor of the monomer. Solid-state polycondensation of single crystals of the linear dimer led also to biaxially oriented nylon 6.     

液晶聚合物的单层与Langmuir-Blodgett膜

系统研究了手性液晶聚硅氧烷和光致变色液晶聚硅氧烷两个毓的侧链液晶聚合物在空气/水界面的单层行为和Langmuir-Blodgett(LB)膜沉积特性,对LB膜结构与存在的聚集现象进行了系统的表征,并初步探讨了LB膜中液晶聚合物表现的功能性。     

Amphiphilic Homochiral Oligopeptides Generated via Phase Separation of Nonracemic α‐Amino Acid Derivatives and Lattice‐Controlled Polycondensation in a Phospholipid Environment

Racemic S‐ethyl thioesters of N^ε‐stearoyllysine (= S‐ethyl (R,S)‐2‐amino‐6‐(stearoylamino)hexanethioate) and S‐ethyl thioesters of γ‐stearyl glutamic acid (=stearyl (R,S)‐4‐amino‐5‐(ethylsulfanyl)‐5‐oxopentanoate) self‐assemble as separated two‐dimensional crystalline monolayers within an achiral phospholipid environment of racemic 1,2‐dipalmitoylglycerol (DPG) and 1,2‐dipalmitoylglycero‐3‐phosphoethanolamine (DPPE), as demonstrated by grazing‐incidence X‐ray‐diffraction (GIXD) measurements performed on the surface of H₂O. Lattice‐controlled polycondensation within these crystallites with deuterium‐enantiolabeled monomers was initiated by injecting aqueous solutions of Ag⁺ or I₂/KI beneath the monolayers, which yielded mixtures of diastereoisomeric oligopeptides containing up to six to eight repeating units, as analyzed by MALDI‐TOF mass spectrometry. Analysis of the diastereoisomeric distribution showed an enhanced relative abundance of the oligopeptides with homochiral sequences containing three or more repeating units. Within the DPPE monolayers, the nucleophilic amino group of the phospholipid operates as an initiator of polymerization at the periphery of the monomer two‐dimensional crystallites. Enhanced relative abundance of enantiomerically enriched homochiral oligopeptides was obtained by the polycondensation of nonracemic monomers. This enhancement indicated a phase separation into racemic and enantiomorphous monomer crystallites within the phospholipid environment, although this separation could not be observed directly by GIXD. A possible role that might have been played by crystalline assemblies for the abiotic generation and amplification of oligopeptides with homochiral sequences is discussed.     

Two applications of metal cyanide square grid monolayers: studies of evolving magnetic properties in layered films and templating Prussian blue family thin films

Two applications of previously described square grid network monolayers prepared at the air/water interface are explored. The monolayer networks are single layers of Prussian blue like mixed-metal cyanide networks that are formed via the interface-directed condensation of amphiphilic pentacyanometallate complex and subphase metal ions. In the first application, the monolayers are deposited onto solid supports and the magnetic properties of the networks are evaluated, as the transferred films evolve from a monolayer to a bilayer to multilayers. In the second application, the network monolayers are used to derivatize a surface, providing a seed layer for the subsequent deposition of solid-state metal cyanide molecule-based magnets. Improved surface wetting results in continuous, transparent magnetic films.     

Synthesis and properties of novel aromatic polyamides derived from 1,5-bis(4-aminophenoxy)naphthalene and aromatic dicarboxylic acids

A new bis(phenoxy)naphthalene-containing diamine, 1,5-bis(4-aminophenoxy)naphthalene, was synthesized in two steps from the condensation of 1,5-dihydroxy-naphthalene with p-chloronitrobenzene in the presence of potassium carbonate, giving 1,5-bis(4-nitrophenoxy)naphthalene, followed by hydrazine hydrate/Pd? C reduction. A series of polyamides and copolyamides were synthesized by the direct polycondensation of the diamine with various aromatic dicarboxylic acids or with mixed dicarboxylic acids in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The polymers having inherent viscosity of 0.81–1.25 dL/g were obtained in quantitative yield. Most of the polymers were generally soluble in aprotic solvent such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, etc. The polymers derived from rigid dicarboxylic acids such as terephthalic acid, naphthalene dicarboxylic acid, and 4,4′-biphenyldicarboxylic acid exhibited crystalline patterns. Glass transition temperatures of polymers were in the range of 230–360°C, and 10% weight loss temperatures in nitrogen and air were above 492 and 470°C, respectively. © 1993 John Wiley & Sons, Inc.     

Synthesis of poly(Nε-phenoxycarbonyl-l-lysine) by polycondensation of activated urethane derivative and its application for selective modification of side chain with amines

We report a methodology for the synthesis of Nε-phenoxycarbonyl-protected poly(l -lysine) on the side chain by chain growth polycondensation of Nα,Nε-bis(phenoxycarbonyl)-l -lysine proceeded through the selective elimination of phenol and CO₂ from the Nα phenoxycarbonyl moiety at 50 °C in N,N-dimethylacetamide in the presence of a primary amine used as an initiator. After optimization of reaction condition, the addition of acetic acid during polycondensation proved effective for the realization of the predicted molecular weight and narrow dispersity of the corresponding polypeptide by adjusting the feed ratio of monomer to the amine initiator because of the suppression of interchain coupling that occurs between the amino terminus of poly(l -lysine) and the Nε-phenoxycarbonyl group on the polymer side chains. Furthermore, taking advantage of the potentially reactive Nε-phenoxycarbonyl moiety on the side chain, post-polymerization modification was effectively achieved by the nucleophilic reaction of amine compounds including primary, secondary, and aromatic amines through the formation of urea linkage, providing a useful platform for synthesis of selective side chain functionalization of poly(l -lysine) samples. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2522–2530     

Kinetic Studies on the Complexation of Chromium(III) with some Amino Acids in Aqueous Acidic Medium

Summary.  The kinetics of the formation of the 1:3 complex of chromium(III) with L-glutamic acid and DL-lysine were studied spectrophotometrically at and 550 nm. The reaction was found to be first order in both reactants. Increasing the hydrogen ion concentration from 3.2×10⁻⁵ to 1.0×10⁻³ molċdm⁻³ retarded the reaction rate which is of the form . Values of 28.8 and 63.6 kJċmol⁻¹ were obtained for the energy of activation and −184 and −116 Jċ K⁻¹ċmol⁻¹ for the entropy of activation for L-glutamic acid and DL-lysine. The logarithms of the formation constants of the two complexes were found to be 5.9 and 5.1. Received January 7, 2000. Accepted (revised) March 8, 2000     

Microbial production of natural poly amino acid

Three kinds of poly amino acids, poly-γ-glutamic acid, poly(ε-L-lysine) and multi-L-arginyl-poly (L-aspartic acid) can be synthesized by enzymatic process independently from ribosomal protein biosynthesis pathways in microorganism. These biosynthesized polymers have attracted more and more attentions because of their unique properties and various applications. In this review, the current knowledge on the biosynthesis, biodegradations and applications of these three poly amino acids are summarized.     

Kinetic Studies on the Complexation of Chromium(III) with some Amino Acids in Aqueous Acidic Medium

 The kinetics of the formation of the 1:3 complex of chromium(III) with L-glutamic acid and DL-lysine were studied spectrophotometrically at and 550 nm. The reaction was found to be first order in both reactants. Increasing the hydrogen ion concentration from 3.2×10⁻⁵ to 1.0×10⁻³ molċdm⁻³ retarded the reaction rate which is of the form . Values of 28.8 and 63.6 kJċmol⁻¹ were obtained for the energy of activation and −184 and −116 Jċ K⁻¹ċmol⁻¹ for the entropy of activation for L-glutamic acid and DL-lysine. The logarithms of the formation constants of the two complexes were found to be 5.9 and 5.1.     

Hydrolysis and Condensation of Alkyltrimethoxysilanes in Monomolecular Films

Hydrolysis and condensation of monomolecular alkyloxysilane films by the Langmuir technique is presented. Octadecyltrimethoxysilane formed monolayers on aqueous subphases with different properties depending on the bulk pH. At pH 1 a solid condensed film was directly formed with a molecular area of 23 Ų and a surface pressure/surface area variation similar to that on non-ionized stearic acid. At pH 5.6 and 11 several phase transitions were observed during the compression of the monolayer with a final collapse at a molecular area of 20 Ų. Relaxation measurements confirmed the stability of the films for longer than 12 hours at different surface pressures below a critical value.     

Synthesis of aromatic polyamides by 1-hydroxybenzotriazole-catalyzed polycondensation of active aromatic diesters with aromatic diamines

Catalytic actions of various additives were studied in the polycondensation of di(4-nitrophenyl) isophthalate with bis(4-aminophenyl) ether in N-methyl-2-pyrrolidone, and 1-hydroxybenzotriazole (HOBt) was found to be a highly effective catalyst that yielded high-molecular-weight polyamide. In addition to the polycondensation of the 4-nitrophenyl ester, the polymerization of negatively substituted phenyl esters like di(2,4,5-trichlorophenyl) isophthalate was also accelerated by HOBt. For the HOBt-catalyzed aminolysis of esters a bifunctional concerted mechanism that involves an eight-membered transition state was proposed.     

Determination of Monobromobimane-Labeled Phytochelatins by High-Performance Liquid Chromatography

A new method for phytochelatins by high-performance liquid chromatography (HPLC) was developed based on a condensation reaction with monobromobimane to produce fluorescent derivatives. Glutathione, H-(γ-glutamic acid-cysteine)₂-glycine-OH, H-(γ-glutamic acid-cysteine)₃-glycine-OH, H-(γ-glutamic acid-cysteine)₄-glycine-OH, H-(γ-glutamic acid-cysteine)₅-glycine-OH, and H-(γ-glutamic acid-cysteine)₆-glycine-OH were well separated, with retention times between 14.68 and 22.0 min. The HPLC method had good linearity (r < 0.9991) between 0.1 mg L^?1 and 100 mg L^?1. The limits of quantification for the analytes (S/N = 3) were 0.08, 0.3, 0.05, 0.3, 0.5, and 0.8 mg L^?1, respectively. The recoveries were between 83.0% and 101.33% with relative standard deviations less than 2%. The reported method is simple, accurate, and suitable for the determination of phytochelatins.     

Topography of dipalmitoyl-phosphatidyl-choline monolayers penetrated by β-casein

In this work we have analyzed the topography by atomic force microscopy (AFM) of dipalmitoyl-phosphatidyl-choline (DPPC) monolayers previously spread at the air–water interface and penetrated by β-casein. AFM images of β-casein–DPPC monolayers were taken from Langmuir–Blodgett films deposited onto hydrophilic mica substrates at different initial surface pressures (π_i) and after the compression of the mixed films. The monolayer topography depends on the initial structure of the phospholipid:liquid expanded (LE) at 3 mN/m, coexistence between LE and liquid condensed (LC) structures at 7 mN/m, at the end of the LE–LC transition at 10 mN/m, and with a LC structure at 15 mN/m. The area occupied by DPPC domains in the mixed film increases with the π_i value, especially for DPPC with a LC structure at 15 mN/m. At this surface pressure the thickness of the film is at a maximum. After the film compression at 25 mN/m, which is above the equilibrium spreading pressure of β-casein (), this protein is displaced from the interface by DPPC and the topography of the mixed monolayer depends on the initial structure of the DPPC monolayer. A notable feature of the topography of these mixed monolayers is the presence of multilayers of β-casein and DPPC of high thickness (50–70 nm) at the lower π_i values. Although the film is dominated by DPPC at the highest surface pressures (at 25 mN/m), β-casein is not displaced totally from the interface and coexists as β-casein collapsed domains within the network of the DPPC structure.     

Synthesis and properties of <Emphasis Type="Italic">O,O</Emphasis>-dialkyl [1-hydroxy-3-(dialkylamino)-2,2-dimethylpropyl]phosphonates

O,O-Dialkyl [1-hydroxy-3-(dialkylamino)-2,2-dimethylpropyl]phosphonates were prepared for the first time. By means of NMR ¹H, IR spectroscopy and quantum-chemical calculations the presence in them of various H-bonds was established. In the crystalline state P=O…HO intermolecular hydrogen bonds favor the formation of cyclic dimer associates D _P=O. In the liquid state and concentrated solutions P=O…HO and N…HO intermolecular hydrogen bonds cause the formation of cyclic dimer associates D _P=O and D_N, and intramolecular hydrogen bonds provide the existence of different conformations of the monomer form MN, the most stable among them with the non-strained six-membered …NCCCOH… ring.     

Collapse of preformed cobalt stearate film on water surface

Preformed cobalt stearate (CoSt) molecules form a film on the water surface, which with barrier compression shows multilayers of different heights that are evidenced from the structures of the films deposited on hydrophilic silicon (0 0 1) substrates by using a horizontal deposition technique at different positions of the surface pressure (π)–specific molecular area (A) isotherm. In-plane morphology and out-of-plane structures are obtained from the atomic force microscopy (AFM) and X-ray reflectivity studies. Electron density profiles (EDPs), extracted from the reflectivity data, show that the monolayer coverage is maximum when π is far before the collapse point (π_c) but with barrier compression domains of multilayers start to form even before π_c. After π_c, two different bilayer repeat distances have been observed from the two different series of the Bragg peaks implying the formation of domains by both the tilted and untilted CoSt molecules. Far after π_c, reflectivity decreases rapidly and morphology of the deposited films changes totally. Structures before and after π_c of the CoSt film have also been obtained by changing the pH of the subphase water. From all the structural information it is clear that the preformed CoSt film collapses in a different way in comparison with the collapse of the standard cobalt stearate monolayer where cobalt stearate molecules were formed at the air–water interface. Reasons for obtaining different structures on the water surface with barrier compression have been proposed.     

SPECTROSCOPIC ANALYSIS OF BINARY AND TERNARY COPPER(II) COMPLEXES FORMED BY HISTIDINE AND GLUTAMIC ACID

Abstract

Ternary copper(II) complexes of the type [Cu(His)A] (HisH=L-histidine, A=glycinato, L-valinato, L-alaninato, L-threoninato, L-serinato, or L-asparaginato) and [Cu(Glu)B]^n- (GluH₂=L-glutamic acid, B=glycinato, L-alaninato, L-valinato (n=1) or an amino-acid with positively charged protonated side chain such as L-asparagine, L-lysine, or L-ornithine (n=0)) have been investigated in aqueous solution by means of ESR and absorption spectra. It is suggested that in the ternary species the histidinate ion adopts a histamine-like bonding mode giving rise to CuN₃O chromophores in the metal plane. Coordination in the bis-(glycine)-like mode is detected in the Glu-containing species. The spectral results have been used to postulate plausible structures for the bis-(histidinato)copper(II) complexes.