桥联β-环糊精液相色谱键合固定相研究

合成了两种桥联β-环糊精固定相,将其用于芳香烃位置异构体、氨基酸的对映异构体的拆分,同时比较了其与β-CD固定相的手性拆分效果。研究结果表明,桥联环糊精固定相对一些对映异构体具有较好的选择性;其对普通的环糊精固定相的选择性具有一定的补充或者改进作用。     

β-环糊精衍生物毛细管气相色谱固定相的研究

将全甲基-β-环糊精、全戊基-β-环糊精及二者的混合液分别静态涂渍在氯化钠粗糙化的弹性石英毛细管内壁.为提高固定相的色谱性能,将环糊精衍生物与OV-1701按1∶4的质量比相混合,制备手性柱.对毛细管的特性、固定相的极性进行了测试,并对手性化合物(±)茚满醇、DL-丙氨酸、DL-缬氨酸、(±)乙酸二氢香芹酮等难分离物质对进行了拆分.结果表明,三种手性固定相均属于中等极性,具有较好的分离性能和成膜能力.分离效果表明,混合固定相对手性化合物及难分离物质对的分离存在协同效应.     

β-环糊精流动相添加剂在手性分离中的应用综述

介绍了β-环糊精的基本性质,综述了β-环糊精及其衍生物作为流动相添加剂在高效液相色谱和高效毛细管电泳手性分离中的应用,并探讨了其作为手性流动相添加剂的特点.指出β-环糊精是良好的手性识别体,不仅可作为色谱手性固定相,还可作为流动相添加剂,用于手性对映体的拆分.     

β-环糊精类液相色谱固定相及其手性拆分应用研究进展

β-环糊精是以1,4-糖苷键首尾相连的环状低聚糖,具有手性识别功能,特别是衍生化的β-环糊精键合固定相,对手性化合物具有良好的拆分能力。本文介绍了β-环糊精的结构和性质,综述了各种衍生化的β-环糊精液相色谱键合固定相及其在手性化合物拆分中的应用。     

四种α-取代丙酸酯在环糊精气相色谱固定相上的手性拆分机理

计算了4种α-取代丙酸酯衍生物在β-环糊精衍生物气相色谱固定相上手性分离过程中的热力学参数,对手性拆分机理进行了探讨。实验结果显示随着温度的升高,样品的容量因子、手性选择因子和分离度都在逐渐降低。热力学参数表明,4种α-取代丙酸酯在固定相上的色谱保留及手性识别都为焓驱动过程,氢键力没有在手性识别中起到决定作用,而样品的母体结构和取代基团的性质则对手性识别有较大的影响。样品在固定相上的手性分离效率的驱动力主要来自于其对映异构体与固定相之间作用力的能量差异。     

基于环糊精本征识别能力的手性色谱介质点击制备及应用

目前环糊精（CD）手性固定相（CSP）的研究大多集中于对CD或桥联臂进行功能衍生引入更多作用位点以提升手性拆分能力,鲜有能够反映天然CD本征识别能力的CSP的研究报道,该文通过"巯基-烯"点击化学反应合成了结构明确可控的单（6-巯基-6-去氧）-β -环糊精手性固定相（CSP1）,其最大限度地保留了天然CD的本征结构,且桥联臂无识别作用位点,固体核磁共振（¹³ C SSNMR）和红外光谱（FTIR）的表征结果证明了CSP1的成功制备,元素分析结果表明,与双键功能化硅胶相比,CSP1的C、H、N的百分含量均得到了提高,计算得出CSP1的表面CD固载量为0.82 μmol/m²。采用高效液相色谱反相模式对50多种手性对映体包括异（口恶）唑啉、手性交酯、手性酮、黄烷酮以及丹磺酰氨基酸等进行了手性拆分,充分考察了天然CD的本征手性识别能力,结果表明CD的本征识别能力比较有利于异（口恶）唑啉类样品中含有两个疏水苯环基团Ph-Ph类样品的分离,对于其他几类样品仅利于部分样品的分离。同时与前期制备的功能三唑桥联CD-CSP及咪唑嗡桥联CD-CSP在同一色谱条件下进行了结果比对,结果证明样品的分离过程除了与手性介质的结构有关外,还与样品分子的结构有很大关系,对桥联臂进行功能改性可提升对部分对映体的选择性,但同时会小幅损失CD的本征手性识别能力。对于环糊精本征识别能力易于分离的样品,在设计手性介质时,其桥联臂不需要任何官能团,这为CD固定相结构的设计提供了有益参考。     

一种吡啶杂环β-环糊精固定相的制备及其气相色谱分离性能

环糊精(Cyclodextrin,CD)因其独特的结构能与客体分子形成超分子体系,从而产生手性识别,已经成为选择性最好、应用范围最广的手性固定相[1-3].除了常见的烷基化和酰基化衍生外,探索在CD分子上引入新的取代功能基团,合成更为有效的CD衍生物仍是目前手性固定相研究的重点[4-6].     

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论

改性环糊精气相色谱手性固定相拆分对映体的选择性及拆分机理的讨论周昕，万宏，欧庆瑜（中国科学院兰州化学物理研究所兰州７３００００）１前言自１９８８年Ｋｏｎｉｇ￣［１］等人成功地将改性环糊精用于毛细管气相色谱固定相拆分对映体以来，环糊精衍生物以其高选择性...     

高效液相色谱手性固定相的制备及色谱柱的评价

制备了两种不同结构的β-环糊精型手性固定相CSP A和CSP B,制成手性色谱柱Ⅰ和Ⅱ,并且用DL-氨基酸衍生物的手性拆分实验对色谱柱进行了评价。     

α-取代丙酸酯化合物在全甲基环糊精固定相上的手性拆分

在全甲基β-环糊精(PMBCD)手性固定相上,测定了20对α-取代丙酸酯类化合物对映体的手性分离行为,计算出18对对映体的热力学参数,并利用超热力学方法证明了其中17对对映异构体在PMBCD上的拆分存在焓熵补偿现象,即存在相同或基本一致的拆分机制。结合热力学参数,讨论了衍生基团、取代基团等因素对对映体分离的影响,论述了PMBCD固定相对这20对对映体的分子识别特性和保留机理。     

Determination of resin acid composition in rosin samples using cyclodextrin‐modified capillary electrophoresis

Rosins are used in a wide variety of industries in varnishes, adhesives, drug coatings, etc. In this project a novel capillary electrophoresis method was developed to investigate the resin acid composition of rosins. The acids were separated and the concentrations of individual acids present in gum rosin samples determined in order to investigate any links between the presence and concentration of these acids and the tendency of rosins to crystallize. The capillary electrophoresis method successfully separated nine resin acids in various rosin samples where previously they could not all be separated. Calibration curves were created to determine acid concentration. Abietic, dehydroabietic, neoabietic, pimaric, isopimaric, levopimaric, sandaracopimaric, palustric, and 7‐oxo‐dehydroabietic acids were separated using a 20 mM tris buffer at pH 9 containing 15% methanol 5 mM (2‐hydroxypropyl)‐γ‐cyclodextrin 10 mM sulfobutylether‐β‐cyclodextrin. Their concentrations in a crystallizing and a noncrystallizing rosin sample were determined.     

生物功能电极(Ⅴ)─葡萄糖氧化酶在环糊精聚合物中的固定化

将葡萄糖氧化酶(GOD)固定在α-环糊精聚合物中,而电子传递体分子被包含在环糊精腔穴中。固定化酶膜的FTIR测定表明,GOD与环糊精聚合物发生共价连接。制备了含电子传递体的不同GOD酶电极并比较了它们的性能。含四硫代富瓦烯的酶电极具有良好的电流响应特性,可望成为第二代葡萄糖酶电极的新构型。     

环糊精及其包结物的电化学研究及应用

本文概述了近年来环糊精及其包结物的电化学研究及应用，同时介绍了我们实验室开展的关于环糊精电化学研究的一些工作。     

Separation of aromatic sulphonic acids by CZE in coated and non‐coated capillaries

Capillary zone electrophoresis (CZE), besides ion‐pairing mode HPLC and salting‐out HPLC, is well‐suited for the analysis of aromatic sulphonic acids widely used as intermediates in the production of synthetic dyes and optical brighteners. The separation selectivity in CZE of many aromatic acids, including positional isomers, can be controlled by the type and concentration of a cyclodextrin additive. The influence of the concentration of β‐cyclodextrin in the working electrolyte on the separation of the positional isomers of naphthalene (poly‐)sulphonic acids, and their amino‐ and hydroxy derivatives, by CZE was studied, both in non‐coated fused silica capillaries and in capillaries coated with polyacrylamide. The migration time scale was calibrated using 4‐alkylbenzenesulphonic acids as the calibration standards. Limiting mobilities of the free acid anions and of their complexes with β‐cyclodextrin were calculated and the effect of the inclusion guest‐host complex formation on the CZE separation was quantitatively characterized. The migration order in coated capillaries is reversed with respect to CZE in non‐coated fused silica capillaries, the separation selectivity is different and the separation of polysulphonic acids such as naphthalene tri‐ and tetrasulphonic acids is significantly accelerated.     

葡萄糖酶电极测定环糊精聚合物中的环糊精单元

用多巴胺电氧化聚合物膜将葡萄糖氧化酶固定在铅笔电极上,制得简易的葡萄糖酶电极.用自制的葡萄糖酶电极对自制环糊精聚合物中环糊精单元进行定量检测.研究了自制的葡萄糖酶电极的检测范围和稳定性.结果表明环糊精聚合物中环糊精单元质量与葡萄糖酶电极响应电流间存在很好的线性关系,且酶电极稳定性好,可以多次反复使用,连续使用30天,响应电流只减弱7%.与用Sulfate-Phenol比色法测得的环糊精聚合物中环糊精单元结果相比,两者相对偏差在8%以内.     

Selective Transport of Saccharides Through a Liquid Membrane Using Cyclodextrin Dimer

A new effective transport system for saccharides through a liquid membranewas constructed. The transport rate of d-ribose in the condition of theliquid membrane with cyclodextrin dimer (2) as a transporter is 2.5 timerlarger than that without the transporter, whereas the transport rate of d-ribosein the condition of the liquid membrane with cyclodextrin monomer (1) isalmost the same as that without the transporter. The transport rate of methyld-glucoside by 2 is over twice than that by 1. The transport rate of d-deoxyribose by 2 is larger than that by 1.     

Cyclodextrin assisted enantiomeric recognition of benzo[de]isoquinoline-1,3-dione derived amino acids

Spectroscopic evidence for enantiomeric recognition of properly modified amino acids through the cyclodextrin assisted formation of polymer like self-assemblies is presented. The requirements for the formation of these assemblies through aromatic π-π stacking are discussed. It is suggested that this approach can be used for enantiomeric separation of chiral compounds that contain both electron-rich and electron-poor moieties.     

氮杂冠醚、环糊精混合功能基键合硅胶液相色谱固定相的合成与评价

冠醚键合固定相主要用于一些无机离子的分离,我们用连续固液相法合成了一系列冠醚键合硅胶固定相,并成功地用于有机化合物的分离［１～４］;β－ＣＤ的内腔疏水而外缘亲水,可以选择性地包结含苯环及萘环的化合物,且具有手性拆分能力,已被用于手性色谱固定相［５,...     

Comparative evaluation of a one‐pot strategy for the preparation of β‐cyclodextrin‐functionalized monoliths: Effect of the degree of amino substitution of β‐cyclodextrin on the column performance

To further evaluate the feasibility and applicability of the one‐pot strategy in monolithic column preparation, two novel β‐cyclodextrin‐functionalized organic polymeric monoliths were prepared using two β‐cyclodextrin derivatives, i.e. mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin and heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin. In this improved method, mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin or heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin reacted with glycidyl methacrylate to generate the corresponding functional monomers and were subsequently copolymerized with ethylene dimethacrylate. The polymerization conditions for both monoliths were carefully optimized to obtain satisfactory column performance with respect to column efficiency, reproducibility, permeability, and stability. The obtained poly(glycidyl methacrylate‐mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) and poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monoliths exhibited a uniform structure, good permeability, and mechanical stability as indicated by scanning electron microscopy and micro‐high‐performance liquid chromatography experimental results. Because of the probable existence of multi‐glycidyl methacrylate linking spacers on the poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monolith, the effect of the ratio of glycidyl methacrylate/heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin was especially studied, and satisfactory reproducibility could still be achieved by strictly controlling the composition of the polymerization mixture. To investigate the effect of the degree of amino substitution of β‐cyclodextrin on column performance, a detailed comparison of the two monoliths was also carried out using series of analytes including small peptides and chiral acids. It was found that the β‐cyclodextrin‐functionalized monolith with mono‐glycidyl methacrylate linking spacers demonstrated better chiral separation performance than that with multi‐glycidyl methacrylate linking spacers.     

Enantiomer separation by gas chromatography on cyclodextrin chiral stationary phases

Fused silica capillary columns coated with several alkyl or acyl cyclodextrin derivatives, especially those of α- and β-cyclodextrins, are suitable for the enantiomer separation of a wide variety of volatile compounds of different molecular size and functionality. Positional isomers and more than 250 pairs of optical isomers have been resolved, including chiral hydrocarbons, acetals, ethers, epoxides, carbonates, lactones, esters, acids, ketones, aldehydes, alcohols, halocarbons, and also nitrogen-and sulfur-containing compounds. The physical properties of the cyclodextrin derivatives, even those obtained as viscous fluids, could be improved by dissolving them in polysiloxane liquid phases commonly used for GLC.