异硫氰酸镧环丁砜配合物的合成及其热分解非等温动力学研究

合成了异硫氰酸镧环丁砜配合物[La(N(CS)_3·3TMSO_2],并进行了热分解非等温动力学研究。运用Achar法与Coats-Redfern法对非等温动力学数据进行分析,推断该热分解为二级反应,其动力学方程为da/dt=Ae~(2/RT)·(1-a)~2,动力学补偿效应表达式为InA=0.218E-0.637。     

溴化轻稀土甘氨酸配合物的热分解动力学

溴化轻稀土甘氨酸配合物的热分解动力学;溴化轻稀土甘氨酸配合物; 热分解动力学     

三苯基氧化膦与氯金酸配合物的热分解反应动力学

本文报道了三苯基氧化膦与氯金酸形成的配合物 HAu Cl4.H2 O.4(C6H5) 3 PO的非等温热分解动力学 ,采用微分与积分相结合的方法 ,推断出了它的热分解反应机理 ,其热分解动力学方程为 :dα/dt=AΦe-E/ RT(32 ) (1 α) ( 2 / 3 ) [(1 α) ( 1 / 3 ) - 1 ] -1     

邻香兰素乙二胺合镍(Ⅱ)配合物的合成、晶体结构及热分解动力学的研究

X射线单晶衍射结果表明,邻香兰素乙二胺合镍(Ⅱ)(Ni-Vaniethy)C₁₈H₁₈N₂NiO₄·H₂O为正交晶系,空间群Pbna,晶胞参数a=1.1931(3)nm,b=1.5233(4)nm,c=1.9592(6)nm,V=3.561nm³,M=403.08,Z=8,D_c=1.50g/cm³,μ=11.23cm^-1,F(000)=1680,最后偏离因子R=0.071.利用TG、DTG曲线对配合物进行了非等温动力学研究,得到了其热分解动力学参数.并探讨了反应的可能机理.     

溴化轻稀土丙氨酸配合物的热分解动力学

溴化轻稀土丙氨酸配合物的热分解动力学;溴化轻稀土丙氨酸配合物;差示扫描量热法;热分解动力学;分解机理     

气相色谱法研究配位化合物的热稳定性(Ⅶ)——Ni(Ⅱ)、Co(Ⅱ)草酸配合物的热分解及产物的催化性能

镍(Ⅱ)、钴(Ⅱ)草酸配合物在氢气中热分解时产生CO₂和CO,并发生加氢催化反应.CoC₃O₄和NiC₂O₄的分解产物CO₂加氢活性很快降低;K₂O等具有分散金属的作用。CoC₂O₄/Al₂O₃和K₂^{[Co(C₂O₄)₂]}/Al₂O₃体系具有Al₂(C₃O₄)₃的分解特征。C₂O₄^2-在Al₂O₃表面能形成表面配合物,在Al₂O₃表面Co(Ⅱ)的还原较为困难。     

钾长石矿热分解过程的研究

研究了钾长石矿热分解过程的反应行为和动力学.对6种钾长石体系进行了热力学分析,计算了各反应在800～1600K的△G_T⁰,并以此指导实验.研究了焙烧温度、停留时间和助剂配比对钾长石体系热分解为水溶性钾的影响,得出最佳操作条件.添加0.9%添加剂Ⅰ能使适宜焙烧温度由1323K降至1223K,钾分解率可达84%.不加与加入添加剂Ⅰ的2种钾长石体系热分解过程皆符合克-金-布动力学方程,均受固膜扩散控制,表观活化能分别为184.84kJ/mol和158.9kJ/mol,并给出相应的动力学方程.     

电子陶瓷粉BaTiO3的液相合成技术(Ⅲ)──前驱体草酸氧钛钡的热分解反应动力学研究

以Brodio线性化简单图解法对前驱体草酸氧钛钡热分解过程中三段动力学参数进行了计算。结果表明,三段热分解的反应级数分别为2、2和0,活化能为96.8、165.1和172.2kJ/mol,频率因子为1.03×10¹¹、5.64×10⁸和2.63×10⁶s^-1.由热分解动力学参数优化热处理工艺制得高纯超细BaTiO₃粉体。     

三元配合物停流—动力学分析法测定铝的研究

利用自动化动力学分析装置研究了铝与3,5-二溴水杨基荧光酮及表面活性剂形成三元配合物的动力学性质,测定了质子、显色剂及表面活性剂的反应级数及反应活化能。提出了一种简便、快速、精密和准确的分析方法,并用于人发中痕量铝的测定。方法灵敏度较高(ε=1.11×10~5L/mol·cm),大多数元素的干扰均可用动力学方法消除,优于其它测定铝的多元配合物体系。     

过渡金属与邻香兰素氨基酸类Schiff碱配合物合成及其性质的研究

本文合成了邻香兰素白氨酸合Cu(Ⅱ) 1, Ni(Ⅱ) 2, 邻香兰素苯丙氨酸合Ni(Ⅱ) 3及邻香兰素丙氨酸合Zn(Ⅱ) 4四种配合物。对其组成、结构进行了分析表征, 研究了它们的热稳定性及非等温热分解动力学, 用微分和积分法进行分析, 推断了第一步热分解反应机理, 得到了热分解反应动力学方程此外, 还得到了配合物的热分解反应动力学补偿效应数学表达式。     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

A theoretical study on decomposition of carbon tetrachloride, trichloroethylene and ethyl chloride in dry air under the influence of an electron beam

New experimental data were published in literature regarding CCl₄, C₂HCl₃ and C₂H₅Cl decomposition in dry air under electron beam influence. Taking into account experimental data theoretical models of those species decomposition were established and computer simulations were performed by the authors of this work to find the kinetics of such processes. The results of the calculations and experimental data show that CCl₄ decomposition depends on delivered dose and initial CCl₄ concentrations. The calculation revealed that recombination of CCl⁺₄ and Cl⁻ is the source of CCl₃ radicals and that reaction may have an important role in the process of CCl₄ decomposition. A theoretical model of C₂HCl₃ decomposition in dry air under electron beam influence describes the decay of C₂HCl₃ and the formation of several products such as Cl₂, CCl₂O, CO, CO₂, HCl and C₂HCl₃O. The detailed comparison of experimental and theoretical data shows relatively good agreement in efficiency of C₂HCl₃ decomposition process, but it can be achieved only with an assumption that the relation between rate constants of C₂HCl₄O intermediate product decomposition (C₂HCl₃O+Cl and COCl₂+CHCl₂) should be around 20 and C₂HCl₃O oxidation rate should be not lower than 7.5×10⁻¹¹ cm³/mols. All those rate constants are not yet established experimentally. The results of the calculation of C₂H₅Cl decomposition and the data obtained experimentally were compared. The temperature, gas pressure, initial C₂H₅Cl concentration and dose range were equal in both cases. An elaborated model allow us to obtain quantitatively similar results as the experiments, but the degree of C₂H₅Cl decomposition for certain dose levels is significantly higher in experimental data. It is quite probable that some important processes have not been included to the theoretical model.     

Geometry and nature of the binding of the pre-reactive complex C2H4…ClF from its rotational spectrum

The encounter complex C₂H₄…ClF was isolated by using a fast-mixing nozzle before chemical reaction could occur between the components and was characterised by Fourier-transform microwave spectroscopy. Rotational constants, centrifugal distortion constants, Cl nuclear quadrupole constants and Cl spin-rotation constants were determined for the isotopomers C₂H₄…³⁵ClF and C₂H₄…³⁷ClF. The complex has C_2v symmetry with the ClF subunit perpendicular to the plane of C₂H₄ and oriented so that Cl is closer to C₂H₄. Both the centrifugal distortion constant Δ_J and the Cl nuclear quadrupole coupling constants indicate that the complex is relatively weakly bound and it is concluded that the interaction between the subunits is largely electrostatic in origin.     

Desorption kinetics of surfactants at fluid interfaces by novel coaxial capillary pendant drop experiments

Surfactants appear in multiphase fluid systems in which the interface and the adjacent bulk phase have been removed from equilibrium. Here, a new method is described for the measurement of rate constants of desorption of surface-active materials from fluid/fluid interfaces and the extent to which adsorption is reversible: the coaxial capillary pendant drop experimental technique.

Kinetic constants are determined by desorption experiments in pendant drops in which the interface adjacent to a surfactant solution is removed from equilibrium by replacing the subphase of the drop with pure water. Further, we demonstrate that although the rate of subphase exchange is comparatively slow with respect to the desorption timescale, it is possible to resolve desorption processes which occur under local equilibrium with the adjacent bulk phase from those that are determined in part by sorption kinetics. Experiments which measure the desorption kinetic coefficient, , using a homologous series of n-alkyl (C₈, C₁₀, C₁₂, C₁₄) dimethyl phosphine oxides are presented.     

Thermal studies of novel molecular perovskite energetic material (C6H14N2)[NH4(ClO4)3]

(C6H(14)N2)[NH4(ClO4)3] is a newly developed porous hybrid inorganic-organic framework material with easy access and excellent detonation performances,however,its thermal properties is still unclear and severely hampered further applications.In this study,thermal behaviors and non-isothermal decomposition reaction kinetics of(C6H(14)N2)[NH4(ClO4)3] were investigated systematically by the combination of differential scanning calorimetry(DSC) and simultaneous thermal analysis methods.In-situ FTIR spectroscopy technology was applied for investigation of the structure changes of(C6H(14)N2) NH4(ClO4)3]and some selected referents for better understanding of interactions between different components during the heating process.Experiment results indicated that the novel molecular perovskite structure renders(C6H(14)N2)[NH4(ClO4)3] better thermal stability than most of currently used energetic materials.Underhigh temperature s,the stability of the cage skeleton constructed by NH4^+and ClO4^-ions determined the decomposition process rather than organic moiety confined in the skeleton.The simple synthetic method,good detonation performances and excellent thermal properties make(C6H(14)N2)[NH4(ClO4)3] an ideal candidate for the preparation of advanced explosives and propellants.     

NOFBX新型绿色推进剂燃烧化学反应动力学模型

本文以具有绿色无毒、高性能、低成本等诸多优势的N_2O-C_2烃类燃料单元复合推进剂(即NOFBX)为对象,首先发展了包含52组分、325反应的燃烧化学反应机理模型。该机理不仅能够准确计算N_2O热解过程中重要组分的分布,而且能够在较宽的温度、压力、化学计量比范围内准确预测N_2O-C_2烃类燃料体系的着火延迟时间和层流火焰传播速度。鉴于本文提出的N_2O-C_2烃类燃料反应机理具有机理规模小、实验验证充分的特点,有望在NOFBX发动机的多维燃烧数值模拟中得到广泛应用。     

一些富勒烯C60双加成物稳定性的理论研究

Ｃ6 0 具有 30个等同的可参与化学反应的活泼双键 ,制备并表征富勒烯多加成产物是富勒烯化学中最前沿的课题之一 .Ｈｉｒｓｃｈ等[15 ]通过研究Ｃ6 0 亚甲基加成反应 ,提出了双加成物立体选择性的一般规律 .我们在Ｃ6 0 氧加成方面做了类似的研究工作[6 8].本文选取几类富勒烯环双加成衍生物即富勒烯氧化产物Ｃ6 0 Ｏ2 [6 ]( 1 )、富勒烯含氮衍生物Ｃ6 0 (ＮＨ) 2 [5 ]( 2 )、富勒烯含吡咯环衍生物Ｃ6 0 (ＣＨ2 ＮＨＣＨ2 ) 2 [9]( 3)和富勒醇前体Ｃ6 0 (ＳＯ4) 2 [10 ]( 4)作为模型分子进行理论研究 ,以探寻富勒烯多加成反应的一般性规律 .…     

CL-20热分解反应机理的ReaxFF分子动力学模拟

为探究固相CL-20热分解反应机理,本文采用反应分子动力学ReaxFF MD模拟研究了含有128个CL-20分子的超胞模型在800–3000 K温度下的热分解过程。借助作者所在课题组研发的反应分析及可视化工具VARxMD得到了热分解过程中多种反应中间物和较为全面的反应路径。氮氧化物是CL-20初始分解的主要中间产物,其中NO₂是数量最多的初始分解产物,观察到的中间物NO₃的生成量仅次于NO₂。统计CL-20初始分解的所有反应后发现,在所有考察温度下CL-20初始分解路径主要是N―NO₂断裂反应和C―N键断裂引起开环的单分子反应路径。N―NO₂断裂反应数量在高温下显著增多,而C―N键断裂引起的开环反应数量随温度升高变化不大。在低温热分解模拟中还观察到CL-20初始分解阶段生成的NO₂会发生双分子反应—从CL-20分子中夺氧生成NO₃。对CL-20热分解过程中环结构演化进行分析后发现,CL-20分解的早期反应中间物主要为具有3元或2元稠环结构的吡嗪衍生物,随后它们会分解形成单环吡嗪。吡嗪六元环结构在热分解过程中非常稳定,这一模拟结果支持Py-GC/MS实验中提出吡嗪存在的结论。CL-20中的咪唑五元环结构相对不稳定,在热分解过程中会发生开环分解而较早消失。由ReaxFF MD模拟得到的3000 K高温热分解产物N₂,H₂O,CO₂和H₂的数量与爆轰实验的测量结果定量吻合。本文获得的对CL-20热分解机理的认识表明ReaxFF MD结合VARxMD有可能为深入了解热刺激下含能材料复杂化学过程提供一种有前景的方法。     

A theoretical study of the reaction of SiH2 with C2H2 and C2D2

Potential energy surfaces of the reaction of SiH₂ and C₂H₂ (and C₂D₂) have been calculated by means of ab initio molecular orbital theory at the QCISD/6-311G++(2df, 2p)//MP2/6-31G(d, p) level with corrections for the triple excitations to the QCISD energies. The barrier heights for the two reaction channels of the adduct, thus calculated, were further utilized for the dynamical calculation of the rate constants in the framework of quantum statistical Rice-Ramsperger-Kassel theory. Contributions of the rate constants of the various pathways to the total rate constant (K_T) for the disappearance of the reactants are critically examined and compared with experiment. The pressure dependence of K_T(C₂H₂) is primarily due to the formation of silirene. K_T(C₂D₂) is consistently higher than K_T(C₂H₂). The standard heat of formation of silirene is predicted to be 72.1 ± 3 kcal/mol. Rearrangement of silirene to vinylsilylene requires an activation energy smaller than that to silylacetylene.