食品接触材料表面印刷油墨中光引发剂的高效液相色谱-串联质谱法检测和迁移研究

采用食品模拟物进行迁移实验,结合高效液相色谱-紫外检测器(UPLC-PDA)和串联质谱(UPLC-MS/MS)技术,建立了食品接触材料印刷油墨中光引发剂BP(二苯甲酮)、MBP(4-甲基二苯甲酮)、Irgacure 184(1-羟基环己基苯基丙酮)、ITX(2-异丙基硫杂蒽酮)、EDAB(对二甲氨基苯甲酸乙酯)和EHD...     

硫杂蒽酮类光引发剂的电子自旋共振研究

本文采用ESR手段对五种硫杂蒽酮类光引发剂2-甲基硫杂蒽酮(MTX)2,4-二甲基硫杂蒽酮(DMTX)、1,2,4-三甲基硫杂蒽酮(TMTX)、2-甲氧基硫杂蒽酮(MOTX),2-戊氧基硫杂蒽酮(AOTX)和三乙胺引发体系进行了研究,提出了该类光引发剂和三乙胺暗反应的机理。     

固相微萃取-气相色谱/质谱法测定果汁及茶饮料中的10种光引发剂

建立了用固相微萃取结合气相色谱/质谱（GC/MS）检测13种果汁饮料和3种茶饮料中10种光引发剂的方法。通过正交试验筛选对萃取过程影响较大的因素,再通过单因素试验进一步优化,确定最佳的操作条件。样品经萃取后,在GC/MS进样口解吸3 min,经HP-5MS色谱柱分离,以选择离子方式监测,外标法定量。为消除基质的干扰,以样品基质加标做工作曲线,线性范围为0.3~60 μg/L,检出限为3~16 ng/L。分别对4个不同加标水平的样品平行测定5次,相对标准偏差均小于14.5%。对不同品牌、不同种类的16种盒装饮料进行了测定,所有样品中全部检出二苯甲酮,部分样品中检出对二甲氨基苯甲酸异辛酯、2-异丙基硫杂蒽酮、4-甲基二苯甲酮、1-羟基环己基苯基甲酮、2-氯噻吨酮。该方法操作简单、灵敏度高、无污染,可对10种光引发剂同时测定。该研究结果为从包装材料迁移至饮料中的光引发剂的测定提供了参考。     

光聚合制备PVC大分子引发剂及两亲接枝共聚物

利用UV光照自引发、双异丙基硫杂蒽酮(BIITX)和异丙基硫杂蒽酮(ITX)引发氯乙烯(VC)聚合得到含缺陷结构或/和ITX残基的PVC.考察了不同引发方式时单体浓度、光强、反应时间和温度对单体转化率、产物分子量及其分布的影响,UV-Vis、1H-NMR和FTIR分析表明所得PVC含缺陷氯或/和ITX残基.以此PVC为大分子引发剂(缺陷结构和ITX残基为引发点),50℃下有效引发了甲基丙烯酸二甲氨基乙酯(DMAEMA)聚合,获得了PVC-g-PDMAEMA共聚物.相比起始PVC,接枝共聚物分子量稍有提高,PDI下降.1H-NMR和FTIR分析证实了接枝共聚物的形成,接枝共聚物在水(pH=3)中组装形成了稳定核-壳结构胶束,显示其具有两亲性.     

类米氏酮光引发剂的合成及在ATRP中的应用

以4,4’-二甲基二苯甲酮为原料,经过溴化、选择性胺化、O-烷基化等反应,依次合成了4-(溴甲基)-4’-[双(羟乙基)氨基]二苯甲酮与4-(腰果酚基甲基)-4’-[双(羟乙基)氨基]二苯甲酮两个功能性的类米氏酮光引发剂,收率分别为58%和46%。在4-(溴甲基)-4’-[双(羟乙基)氨基]二苯甲酮中含有苄溴基团,因此该化合物还可作为ATRP或SET-LRP引发剂。同时,利用4-(溴甲基)-4’-[双(羟乙基)氨基]二苯甲酮作引发剂进行了腰果酚单体的AGET ATRP聚合反应,得到相应的腰果酚均聚物(Mn=20.2 k Da,PDI=1.11)。小分子化合物的结构用1H-NMR进行了表征。     

二芳酮-可聚合胺紫外光引发1,6-己二醇二丙烯酸酯聚合的动力学研究

用Photo-DSC(光差热扫描)研究了一种可聚合胺助引发剂乙二醇-3-吗啡啉丙酸酯甲基丙烯酸酯(EGMPM)分别与二苯甲酮(BP)、4-(4-甲苯硫基苯基)苯基甲酮(BMS)、4-氯二苯甲酮(CBP)、4-氯甲基二苯甲酮(CMBP)、4-羟甲基二苯甲酮(HMBP)等二芳酮组成的光引发体系引发以1,6-己二醇二丙烯酸酯(HDDA)为单体的紫外光聚合动力学.考察二芳酮质量分数、聚合温度、光照强度对其光聚合动力学影响,并评价其引发效果;同时计算出了EGMPM/BP引发HDDA聚合体系的活化能.结果表明,二芳酮的质量分数增加时,反应达到最大反应速率的时间减少,单体的转化率也相应增加,单体聚合速率相应增大;相同质量分数(0.1%)的不同二芳酮,BMS体系达到最大反应速率的时间最短,单体转化率也最高;随着温度和光强的增加,单体最终转化率、最大反应速率增大,达到最大反应速率所需的时间减少.     

新型的含葡萄糖胺的水溶性高分子型硫杂蒽酮光引发剂

将硫杂蒽酮光引发剂(TX)和共引发剂葡萄糖胺(GA)引入同一个高分子链上,合成新型水溶性高分子型硫杂蒽酮光引发剂(PTX-GA).通过改变PTX-GA中TX与GA的比例,合成了PTX-GA1、PTX-GA2、PTX-GA3,并通过光膨胀计实验研究了3种引发剂引发丙烯酰胺聚合的能力.研究表明这种水溶性高分子型硫杂蒽酮光引发剂即使在没有共引发剂胺的情况下,引发丙烯酰胺(AAM)的聚合效率也非常显著.同时由于它具有水溶性,而且含有生物分子,有利于改善光引发剂的生物相容性.     

基于光致脱羧的单组分可见光引发剂的合成及其光化学性能研究

单组分可见光引发剂是光固化材料研发中的重要内容。本文设计并合成了一种新型的单组分可见光引发剂——2-硫杂蒽酮乙酸四苯基磷酸盐(TXP),该引发剂以硫杂蒽酮为生色团,通过光致脱羧反应产生活性自由基,进而引发聚合反应。利用核磁和高分辨率质谱对TXP的结构进行了表征;通过光解及电子自旋共振捕获等方法研究了其光致脱羧反应。光聚合动力学研究表明:在可见光源照射下,这种单组分光引发剂能高效引发巯基-烯类单体的聚合反应,具有一定的应用的前景。     

还原态脒类LED光产碱剂的合成及性能研究

光产碱剂作为光固化材料体系中的关键组分,对光固化速率及固化材料性能有重要影响。本文以氧杂蒽酮作为生色团,脒类化合物DBN作为强碱基团,设计并合成了一种新型单组分氧杂蒽酮还原态脒类光产碱剂,并系统探究了其光物理和光化学行为。结果表明,氧杂蒽酮还原态脒类光产碱剂在345 nm区域具有较强吸收,光解后释放的强碱DBN可有效引发巯基-环氧体系聚合。与商品化苄基还原态脒类光产碱剂相比,氧杂蒽酮生色团的引入使光产碱剂的吸收波长红移,能更好地匹配365 nm LED光源;与离子型硫杂蒽酮光产碱剂相比,氧杂蒽酮还原态脒类光产碱剂在光解过程中不产生二氧化碳,且催化效率更高,具有良好的应用前景。     

硫酸法合成感光树脂光引发剂——硫杂蒽酮及其衍生物

感光性树脂在光致抗蚀材料,光固化涂料、油墨、胶粘剂、封装材料及印刷制板等方面有广泛用途。在光聚合交联感光性树脂中光引发剂为必不可少的组成,它直接影响材料的性能。硫杂蒽酮光引发剂在国外已大量采用。优点为引发速率快,深度固化性能好,氧阻小。国内有关硫杂蒽酮及其衍生物的合成、性能及应用方面的报导尚属鲜见,我们采     

食品包装材料中7种光引发剂向水性模拟液中的迁移测定

为了考察食品包装材料中光引发剂向食品中迁移的情况,以水性模拟液作为迁移溶剂,用65 μm聚二甲基硅氧烷/二乙烯基苯(PDMS-DVB)纤维头进行固相微萃取结合气相色谱-质谱(SPME/GC-MS)分析方法同时测定食品包装材料中7种光引发剂(PIs)的迁移量。方法的检出限为0.0012～0.0069 μg/L,线性范围为0.03～1.0 μg/L (r2＞0.9909),在3种浓度的添加水平下,加标回收率为70.8%～112.0%,相对标准偏差不大于14.0%。利用建立的方法对20个实际样品进行测定,发现所有样品中均检出二苯甲酮,其中10个样品中检出4-甲基二苯甲酮,3个样品中检出1-羟基环己基苯基甲酮,1个样品中检出安息香双甲醚。该方法的灵敏度高,样品前处理过程简单,无需使用有机溶剂,为食品接触材料表面印刷油墨中PIs向水性样品中的迁移测定提供了参考。     

气相色谱-质谱法测定食品接触材料表面印刷油墨中的光引发剂

建立了食品接触材料表面印刷油墨中光引发剂(PIs)二苯甲酮(BP)、4-甲基二苯甲酮(MBP)、对二甲氨基苯甲酸乙酯(EDAB)、N,N-二甲氨基苯甲酸异辛酯(EHDAB)和1-羟基环己基苯基甲酮(Irgacure 184)的气相色谱-质谱(GC-MS)分析方法。样品以乙酸乙酯为萃取溶剂进行索氏提取,萃取溶液经净化分离和富集以后,以5%苯基-95%甲基聚硅氧烷为固定相(DB-5MS),采用选择离子扫描(SIM)方式对上述5种PIs进行了定性和定量分析。5种PIs在5.0～200.0 μg/L范围内的线性关系良好(R2＞0.9995),在2种浓度的添加水平下,回收率为66.7%～89.4%,相对标准偏差＜10%。方法的定量限为0.0017～0.0036 mg/dm2。该方法的样品前处理过程简单,易操作,适用于常规进出口食品接触材料表面印刷油墨中PIs的快速检测。     

Determination of low-level ink photoinitiator residues in packaged milk by solid-phase extraction and LC-ESI/MS/MS using triple-quadrupole mass analyzer

A confirmatory and quantitative method based on liquid chromatography–electrospray ionization tandem mass spectrometry (LC-ESI/MS/MS) has been developed for simultaneous determination of seven photoinitiator residues: benzophenone, (1-hydroxycyclohexyl)phenylketone (Irgacure 184), isopropylthioxanthone (ITX), 2-ethylhexyl-(4-dimethylamino)benzoate (EHA or EHDAB), 2-methyl-1-[4-(methylthio)phenyl]-2-(4-morpholinyl)-1-propanone (Irgacure 907), (2,4,6-trimethylbenzoyl)diphenylphosphine oxide (TPO) and 2-benzyl-2-(dimethylamino)-1-(4-morpholinophenyl)-1-butanone (Irgacure 369) in packaged milk and related packaging materials. Residues of photoinitiators were extracted from milk using acetonitrile, and further enriched and purified on HLB solid-phase extraction cartridges prior to being analyzed by LC-ESI/MS/MS with selected reaction monitoring mode, while photoinitiators in packaging materials were extracted using the same solvent. Satisfactory recovery (from 80 to 111%), intra- and inter-day precision (below 12%), and low limits of quantification (from 0.1 to 5.0 μg kg⁻¹) were evaluated from spiked samples at three concentration levels (5.0, 10.0 and 25.0 μg kg⁻¹ for Irgacure 184 and 2.5, 5.0 and 25.0 μg kg⁻¹ for others). These excellent validation data suggested the possibility of using the LC-ESI/MS/MS method for simultaneous determination of low-level photoinitiator residues migrating from printed food-packaging materials into milk. The method has been successfully applied to the analysis of real samples of different fat contents ranging from 8 to 30 g L⁻¹. The photoinitiator residues were revealed to be higher in milk with higher fat content and the most important contaminations were benzophenone and ITX in concentration ranges of 2.84–18.35 and 0.83–8.87 μg kg⁻¹, respectively.     

Comparative study of ink photoinitiators in food packages using gas chromatography with vacuum ultraviolet detection and gas chromatography with mass spectrometry

This work focused on the development and validation of the analytical procedure using gas chromatography equipped with vacuum‐ultraviolet detection for the specific and sensitive determination of nine photoinitiators in food packages. Subsequently, a comparison of the combination of vacuum ultraviolet spectroscopy with gas chromatography and a developed gas chromatography with mass spectrometry method was performed. The vacuum‐ultraviolet spectra of all tested photoinitiators were collected and found to be highly distinct, even for isomers. Under the optimal conditions, the limits of detection for nine photoinitiators ranged from 1 to 5 mg/L using vacuum ultraviolet detection and from 0.15 to 0.5 mg/L using mass spectrometric detection. Both techniques were successfully applied for screening of photoinitiators in seven kinds of food packages and the obtained data showed good agreement (the relative difference was between 3 and 18%). The variability in concentrations found in triplicate samples was assessed to be below 18%. Predominantly benzophenone was found in all analysed samples in the range of 0.31–4.23 mg/kg. It appears to be preferably selected by food packaging manufacturers. This study proposes a new simple and sensitive technique used for analysis of photoinitiators that could be a good alternative to gas chromatography with mass spectrometry.     

Evaluation of the migration of UV-ink photoinitiators from polyethylene food packaging by supercritical fluid chromatography combined with photodiode array detector and tandem mass spectrometry

UV-ink photoinitiators (PIs), which are used to initiate polymerization reaction for the curing of inks and lacquers, have become a kind of contaminant residues in printing plastic food packaging. The residual PIs in packaging may pose a potential threat to customers. In this work, migration behaviors of 13 PIs from a polyethylene (PE) packaging to food simulants according to regulation EU No 10/2011 were studied by supercritical fluid chromatography combined with photodiode array detector and tandem mass spectrometry (SFC-PDA-MS/MS). The method simultaneously analyzed 13 PIs within 4.5 min and was sensitively with low limits of detection of 0.02–2.16 μg/L, which could meet high throughput analysis for control the quality of food packaging. The migration results revealed that Irgacure 819, Darocure 1173 and TPO, which had low migration rates, should be preferably selected by plastic food packaging manufacture for food safety.     

微波消解/电感耦合等离子体质谱法同时测定食品纸包装材料与食品模拟物中24种元素

建立了微波消解/电感耦合等离子体质谱(ICP-MS)同时检测食品纸包装材料及3种食品模拟物(纯水、4%乙酸、10%乙醇)中Li,Be,B,Al,V,Cu,Mn,Zn,Cr,Ni,As,Sr,Zr,Se,Mo,Ag,Cd,Sn,Sb,Te,Ba,Hg,Tl,Pb 24种元素的分析方法,并对元素的迁移行为进行了研究。包装材料样品经微波消解后利用ICP-MS检测;迁移试验中的食品模拟物直接利用ICP-MS检测。在优化实验条件下,24种元素在0~1 000μg/L范围内线性关系良好;方法检出限(MLOD)为0.000 3~0.465 mg/kg;在1.0~1 000 mg/kg加标水平下的平均回收率为90.5%~125.3%;相对标准偏差(RSD,n=3)为1.2%~6.8%。该方法前处理简便、灵敏准确、适用范围广,可用于食品纸包装材料中元素含量的测定及迁移行为的研究,从而为食品纸包装材料的质量监督提供了科学依据。     

固相萃取-高效液相色谱法同时测定食品塑料包装材料中9种光稳定剂

建立了同时测定食品塑料包装材料中9种紫外光稳定剂含量的高效液相色谱方法。样品用甲醇-乙酸乙酯混合溶剂超声提取,经固相萃取小柱净化后,以ZORBAX SB-C18柱(250 mm×4.6 mm, 5 μm)为分离色谱柱,甲醇和水为流动相,梯度洗脱,以310 nm为检测波长进行定性、定量分析。该方法前处理简单、易操作,9种紫外光稳定剂分离效果良好。9种紫外光稳定剂在0.2～10 mg/L范围内呈良好的线性关系,线性相关系数大于0.999;方法检出限为0.05～0.1 mg/L;实际样品中的加标回收率为70.2%～89.0%,相对标准偏差为0.4%～4.5%。该方法简单、准确,能够满足食品塑料包装材料中紫外光稳定剂的检测要求。     

Non-extractable photoinitiators based on thiol-functionalized benzophenones and thioxanthones

Non-extractable photoinitiators could be advantageous for use in biological, electronic, and food packaging applications. Therefore, thioxanthone and benzophenone derivatives were synthesized from 1,6-hexane dithiol and chlorinated benzophenone or thioxanthone. The efficiency of thiol-functionalized photoinitiators in combination with amine co-initiators was compared to benzophenone and isopropylthioxanthone with amine co-initiators, and the cleavage of photoinitiator 2,2-dimethoxy-1,2-diphenylethan-1-one in acrylic resins. The reaction kinetics were analyzed using photo-differential scanning calorimetry and real-time FTIR. Coating physical properties were evaluated by pendulum and pencil hardness, steel-wool scratch and mandrel bend tests. The non-extractable photoinitiators had higher absorbance than their benzophenone or isopropylthioxanthone counterparts due to the sulfide substitution on the phenyl ring, and the free thiol groups reacted with the acrylate by either an amine catalyzed Michael addition or a free-radical chain process. The combination of thiol-functionalized photoinitiators with secondary amines provides an efficient photoinitiator system that is locked into the photopolymerized network and cannot be extracted with typical solvents.