用于电致发光器件的蓝光聚合物材料研究进展

聚合物电致发光材料成型加工简便、可大面积生产,可应用于大面积平板显示及固体照明器件。与红、绿光聚合物发光材料相比,蓝光聚合物电致发光材料在发光性能、材料寿命等方面仍然存在较大差距,这成为全色显示的瓶颈。通过在聚合物主链上引入大体积的取代基或侧链、形成具有三维空间共轭效应的支化结构或能量可转移的主客体结构等,来改善溶解性和光物理性能等,从而得到发光效率高、色纯度好、热力学性能优异且材料加工性能良好的蓝光聚合物电致发光材料。本文从材料设计的角度简要介绍了国内外蓝光聚合物发光材料的主要研究进展。     

白光LED用β-Sialon:Eu~(2+)氮氧化物绿色荧光粉的研究进展

β-Sialon:Eu~(2+)绿色荧光粉具有高的发光效率、好的热稳定性与化学稳定性、窄的发射光谱带、高色纯度等优点,在白光LED领域展现出广阔的应用前景。本文针对近年来β-Sialon:Eu~(2+)绿色荧光粉的结构、发光性能、发光性能提升以及制备技术等方面的研究现状与进展做了较系统的总结分析,提出了今后可能的研究和发展的方向。     

固定化联吡啶钌电化学发光免疫分析研究进展

综述了固定化联吡啶钌[Ru(bpy)23+]电化学发光免疫传感技术的发展状况,介绍了近年来在电化学发光免疫传感领域出现的新型固相载体材料和固定方法,及其与其他分析技术联用方面的发展,并对其发展趋势进行了展望.指出电化学发光免疫分析技术在生物分子检测、药物分析及临床诊断中显示出强大的生命力.Ru(bpy)23+的电化学发光已引起广泛的关注.固定化Ru(bpy)23+电化学发光免疫分析体系具有线性范围宽、灵敏度高、装置简单、可控性强等优点,被广泛应用于分子生物学、化学、药学等领域.     

N-苯基咔唑取代的蓝光聚(2,7-咔唑)的合成与表征

采用Suzuki聚合方法并通过改变催化剂的投料量,合成了一系列具有不同分子量的N-苯基咔唑取代的蓝光聚(2,7-咔唑),并详细研究了分子量对聚合物的光物理、电化学和电致发光器件性质的影响.结果表明,刚性N-苯基咔唑侧链的引入,能够有效地调控主链之间的相互作用,提高蓝光的色纯度,并使得该系列聚合物的固态荧光量子效率高达0.40.同时,在热退火及器件工作过程中,没有观察到类似聚芴中绿光峰的出现,表明具有良好的光谱稳定性.单层聚合物电致发光器件的最大发光效率为0.33 cd/A,色坐标为(0.18,0.12).     

含稀土铕络合物的三元共聚物的光电性质

合成了可平衡电荷(空穴与电子)传输的三功能合一的稀土铕发光材料,将几种稀土铕络合物单体与乙烯基咔唑、甲基丙烯酸甲酯共聚制得含咔唑和稀土铕络合物的空穴传输层发光层电子传输层(HTLEMLETL)三功能合一的聚合物,并研究它们的电化学及电致发光性能.电化学分析表明这类三元共聚物兼有氧化性和还原性,氧化电位及还原电位分别为0.75V和-1.8V左右,可见这类材料同时具有空穴传输和电子传输功能.从测定的电致发光谱看,AlQ3、TPD及咔唑基等发光单元在器件中没有共发光,而是起电荷传输作用,以这些材料制作的电致发光器件所发的红光纯度都比较高.     

含硅宽禁带聚合物的合成及其光电性能研究

采用Suzuki聚合方法合成了以菲并咪唑为侧链的4种含硅宽禁带发光聚合物,并研究了这4种聚合物的光物理、电化学性质与电致发光性能.结果表明四苯基硅基团的引入能够得到宽的带隙,侧基上菲并咪唑的引入可以实现深蓝光发射.其中,基于聚合物P1的电致发光器件最大外量子效率为0.65%,最大发光效率为0.33 cd A~(-1),色坐标为(0.163,0.099).     

含噁二唑的聚(间亚苯乙烯)电致发光二极管

1990年英国剑桥大学的Burroughes等人[1]以聚(对亚苯乙烯)为发光材料制备了第一个有机聚合物电致发光二极管,该工作引起了科学工作者的极大兴趣.聚合物材料具有很好的电、热稳定性以及机械加工和成膜性能,发光亮度和效率较高,通过化学修饰可获得三原色发光.而且聚合物电致发光二极管的工作电压较低,可实现大面积平板显示和集成化.     

量子点光刻技术及其显示应用

量子点显示器件具有高光谱纯度、宽色域、高亮度等优势,被认为是显示行业未来的一个重要发展方向。发展量子点高精度光刻图案化技术对实现其在显示领域的应用具有重要的意义。本文阐述了量子点光刻技术的最新进展,主要包括光刻胶辅助剥离光刻和直接光刻技术。在直接光刻技术方面,着重介绍混入光刻胶光刻和配体工程光刻,并对图案化的量子点发光层在光致发光和电致发光中的应用进展进行评述。同时,介绍量子点光刻中存在的问题并展望其在超高分辨率显示领域的应用前景。     

胶体量子阱发光二极管的研究进展

胶体量子阱(CQW)由于具有高色纯度、高光致发光量子效率、光色可调等优异的光电性能，近年来成为一种新型的光电材料，广泛用于制备发光二极管、激光、探测器、太阳能电池等半导体器件。其中，基于CQW的发光二极管(CQW-LED)因为具备极窄的光谱、极佳的色纯度、高效率、可溶液加工、可柔性化等优点，在显示和照明等领域展现出重要应用前景，受到学术界和工业界的广泛重视而成为研究热点。本文首先介绍了CQW-LED中的一些基本概念，包括CQW材料特性、LED器件结构、发光机理等；然后从CQW材料种类的角度出发，阐述了基于单核型、核/冠型、核/壳型、复杂异质结型、以及杂质掺杂型CQW-LED近年来的研究进展，并结合我们研究团队最近的工作详细的介绍了实现高性能CQW-LED的方法，包括对材料选取、设计策略、器件结构、器件性能、工作机理以及发光过程的分析；接着，介绍了CQW-LED的集成应用；最后探讨了CQW-LED目前面临的挑战及其未来的发展机遇。     

以铱配合物为核、聚(芴-咔唑)为臂的白光星型磷光聚合物

设计合成了以苯基苯并咪唑和吡啶三唑为配体的高效的黄绿光铱配合物(M1),并通过Suzuki缩聚反应制备了以磷光铱配合物客体为中心核、蓝光荧光聚(芴-咔唑)主体为臂的星型磷光聚合物(P2.5、P5.0和P10),着重对M1和聚合物的发光性能、电化学性能及热稳定性能进行研究。 结果表明,M1具有较高的荧光量子效率(32.06%),其荧光寿命为1.09 μs,聚合物荧光寿命为2.223.93 μs,均表现为磷光;通过调节主客体的比例,利用主客体的部分能量转移机制,来实现聚合物的不同光色,发光颜色可从蓝光向黄光变化;当M1摩尔分数为2.5%时,获得的白光聚合物(P2.5)具有较好的发光性能和热稳定性能,色坐标为(0.30,0.32),位于白光区域,其最高占有轨道(HOMO)能级和最低未占有轨道(LUMO)能级分别为5.49和2.43 eV,荧光量子产率为14.3%,荧光寿命为2.22 μs。     

红色铱配合物磷光材料及器件的研究进展

有机电致发光器件具有驱动电压低、高亮度、高效率等优点,引起了研究人员的广泛关注,在固态照明和平板显示领域具有广阔应用前景。 在绿、蓝、红三基色器件中,绿光器件和蓝光器件的性能普遍优于红光器件,基本满足了产业化的需要;目前红色有机电致发光材料及器件的研究进展相对缓慢。 因为红光材料的能隙较窄,致使主客体材料之间能级匹配困难,导致红光器件普遍效率低、色纯度差,但是,红光材料是获得白光器件必不可少的材料。 因此,如何获得高性能红光材料对于有机电致发光器件的发展至关重要。 本文综述了近年来红色铱配合物磷光材料及器件的研究进展,对提升效率和色纯度的方法进行重点阐述;并结合现有工作,对红色有机电致磷光材料与器件的前景进行展望。     

溶液法制备图案化量子点薄膜的研究进展

量子点发光二极管(QLED)由于具有显色性好、 色纯度高和性能稳定等特点而受到广泛关注, 可用于制备具有超薄结构和柔性结构的显示器件. 量子点(QDs)层是QLED器件的核心发光层, 制备高质量的图案化QD薄膜对于提高QLED器件性能至关重要. 本文综述了近年来溶液法制备QD薄膜的研究进展, 探讨了目前主要使用的各种溶液法的优势和前景, 并对最近新发展的纤维辅助的溶液可控转移制备QD薄膜方法的优势和发展前景进行了评述.     

Solution-Processable Pure-Red Multiple Resonance-induced Thermally Activated Delayed Fluorescence Emitter for Organic Light-Emitting Diode with External Quantum Efficiency over 20 %

Developing solution-processable red organic light-emitting diodes (OLEDs) with high color purity and efficiency based on multiple resonance thermally activated delayed fluorescence (MR-TADF) is a formidable challenge. Herein, by introducing auxiliary electron donor and acceptor moieties into the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributed positions of multiple resonance skeleton simultaneously, an effective strategy to obtain red MR-TADF emitters was represented. The proof-of-the-concept molecule BN-R exhibits a narrowband pure-red emission at 624 nm, with a high luminous efficiency of 94 % and a narrow bandwidth of 46 nm. Notably, the fabricated solution-processable pure-red OLED based on BN-R exhibits a state-of-the-art external quantum efficiency over 20 % with the Commission Internationale de I’Éclairage coordinates of (0.663, 0.337) and a long operational lifetime (LT₅₀) of 1088 hours at an initial luminance of 1000 cd m⁻².     

A Novel Deep Blue LE-Dominated HLCT Excited State Design Strategy and Material for OLED

Deep blue luminescent materials play a crucial role in the organic light-emitting diodes (OLEDs). In this work, a novel deep blue molecule based on hybridized local and charge-transfer (HLCT) excited state was reported with the emission wavelength of 423 nm. The OLED based on this material achieved high maximum external quantum efficiency (EQE) of 4% with good color purity. The results revealed that the locally-excited (LE)-dominated HLCT excited state had obvious advantages in short wavelength and narrow spectrum emission. What is more, the experimental and theoretical combination was used to describe the excited state characteristic and to understand photophysical property.     

Merging Boron and Carbonyl based MR-TADF Emitter Designs to Achieve High Performance Pure Blue OLEDs**

Multiresonant thermally activated delayed fluorescence (MR-TADF) compounds are attractive as emitters for organic light-emitting diodes (OLEDs) as they can simultaneously harvest both singlet and triplet excitons to produce light in the device and show very narrow emission spectra, which translates to excellent color purity. Here, we report the first example of an MR-TADF emitter (DOBDiKTa) that fuses together fragments from the two major classes of MR-TADF compounds, those containing boron (DOBNA) and those containing carbonyl groups (DiKTa) as acceptor fragments in the MR-TADF skeleton. The resulting molecular design, this compound shows desirable narrowband pure blue emission and efficient TADF character. The co-host OLED with DOBDiKTa as the emitter showed a maximum external quantum efficiency (EQE_max) of 17.4 %, an efficiency roll-off of 32 % at 100 cd m⁻², and Commission Internationale de l’Éclairage (CIE) coordinates of (0.14, 0.12). Compared to DOBNA and DiKTa, DOBDiKTa shows higher device efficiency with reduced efficiency roll-off while maintaining a high color purity, which demonstrates the promise of the proposed molecular design.     

Crystal rigidifying strategy toward hybrid cadmium halide to achieve highly efficient and narrowband blue light emission

Highly efficient and narrowband blue light-emitting performance is extremely crucial for the optoelectronic applications of organic-inorganic hybrid perovskites. However, the not yet viable approach has been shown to simultaneously improve photoluminescence quantum yield (PLQY) and narrow linewidth of blue light emission. Herein, a new crystal rigidifying strategy is proposed as a viable dual-optimization avenue. Specifically, we perform a post-synthetic technique on hybrid cadmium halides and successfully convert zero-dimensional (0D) DMP-0-CdBr₄ to one-dimensional (1D) DMP-1-CdBr₃, accompanied by luminescent transformation from sky-blue (470 nm) to deep-blue (432 nm) emissions. The structural evolution from discrete block to infinite chain significantly enhances the crystal rigidity, which results in narrower emission linewidth (89 to 50 nm) and increased color purity (74.5% to 96.7%). Synchronously, the PLQY also realizes a notable enhancement from 14.0% to 52.3%. Systematical characterizations demonstrate that enhanced crystal rigidity simultaneously weakens the electron-phonon interaction and slows down nonradiative decay, which narrows the emission linewidth and boosts the PLQY. The highly efficient light-emitting performance enables them as excellent down-conversion blue phosphors to fabricate solid-state LED giving bright warm white light with high color rendering index of 95.4. This work paves a novel structural optimization way to rationally design or fine-tune high-performance blue-light emitting halides.     

Orthogonal Trichromatic Upconversion with High Color Purity in Core-Shell Nanoparticles for a Full-Color Display

Materials with tunable emission colors has attracted increasing interest in both fundamental research and applications. As a key member of light-emitting materials family, lanthanide doped upconversion nanoparticles (UCNPs) have been intensively demonstrated to emit light in any color upon near-infrared excitation. However, realizing the trichromatic emission in UCNPs with a fixed composition remains a great challenge. Here, without excitation pulsed modulation and three different near-infrared pumping, we report an experimental design to fine-control emission in the full color gamut from core–shell-structured UCNPs by manipulating the energy migration through dual-channel pump scheme. We also demonstrate their potential application in full-color display. These findings may benefit the future development of convenient and versatile optical methos for multicolor tuning and open up the possibility of constructing full-color volumetric display systems with high spatiotemporal resolution.     

Solution-processed multi-resonance organic light-emitting diodes with high efficiency and narrowband emission

With excellent color purity(full-width half maximum(FWHM) 40 nm) and high quantum yield,multiresonance(MR) molecules can harvest both singlet and triplet excitons for highly efficient narrowband organic light-emitting diodes(OLEDs) owing to their thermally activated delayed fluorescence(TADF)nature.However,the highly rigid molecular skeleton with the oppositely positioned bo ron and nitrogen in generating MR effects results in the intrinsic difficulties in the solution-processing of MR-OLEDs.Here,we demonstrate a facile strategy to increase the solubility,enhance the efficiencies and modulate emission color of MR-TADF molecules by extending aromatic rings and introducing tert-butyls into the MR backbone.Two MR-TADF emitters with smaller singlet-triplet splitting energies(ΔE~(ST))and larger oscillator strengths were prepared conveniently,and the solution-processed MR-OLEDs were fabricated for the first time,exhibiting efficient bluish-green electroluminescence with narrow FWHM of 32 nm and external quantum efficiency of 16.3%,which are even comparable to the state-of-the-art performances of the vacuum-evaporated devices.These results prove the feasibility of designing efficient solutionprocessible MR molecules,offering important clues in developing high-performance solution-processed MR-OLEDs with high efficiency and color purity.     

New Phosphors for White LEDs

White light-emitting diodes (WLEDs) have matched the emission efficiency of florescent lights and will rapidly spread as light source for homes and offices in the next 5 to 10 years. WLEDs provide a light element having a semiconductor light emitting layer (blue or UV LEDs) and photoluminescence phosphors. GaN-based highly efficient blue InGaN LEDs combined with phosphors can produce white light. These solid-state LED lamps have a number of advantages over conventional incandescent bulbs and halogen lamps, such as high efficiency to convert electrical energy into light, reliability, and long operating lifetime (about 100,000 hours). For the purpose of development of high energy-efficient white light sources, we need to produce highly efficient new phosphors, which can absorb excitation energy from blue or UV LEDs and generate emissions.In this paper, we investigate the development of blue or UV LEDs by the appropriate combination of new phosphors which can lead us to obtain high brightness white light. The criteria of choosing the best phosphors, for blue (380-450 nm) and UV (360-400 nm) LEDs, strongly depends on the absorption and emission of the phosphors. Moreover, the balance light between the light emission from blue LEDs and the yellow YAG:Ce,Gd phosphor is important to obtain white light with high color temperature. The phosphors with high efficiency which can be excited by UV LEDs are important to obtain the white light with high color rendering index.