Towards the chiral metabolomics: Liquid chromatography–mass spectrometry based dl-amino acid analysis after labeling with a new chiral reagent, (S)-2,5-dioxopyrrolidin-1-yl-1-(4,6-dimethoxy-1,3,5-triazin-2-yl)pyrrolidine-2-carboxylate,and the application to saliva of healthy volunteers

A novel triazine-type chiral derivatization reagent, i.e., (S)-2,5-dioxopyrrolidin-1-yl-1-(4,6-dimethoxy-1,3,5-triazin-2-yl) pyrrolidine-2-carboxylate (DMT-(S)-Pro-OSu), was developed for the highly sensitive and selective detection of chiral amines and amino acids by UPLC–MS/MS analysis. The enantiomers of amino acids were easily labeled with the reagents at room temperature within 40 min in an alkaline medium containing triethylamine. The diastereomers derived from proteolytic amino acids, except serine, were well separated under isocratic elution conditions by reversed-phase chromatography using an ODS column (R_s = 1.2–9.0). dl-Serine was separated by use of an ADME column which has relatively higher polar surface than the conventional ODS column. The characteristic product ions, i.e., m/z 195.3 and m/z 209.3, were detected from all the diastereomers by the collision-induced dissociation of the protonated molecule. A highly sensitive detection on the amol–fmol level was obtained from the selected reaction monitoring (SRM) chromatogram. The chiral amines (e.g., adrenaline and noradrenaline) labeled with DMT-(S)-Pro-OSu were also well separated and sensitively detected by the present procedure. The method using DMT-(S)-Pro-OSu was used for the determination of dl-amino acids in the human saliva from healthy volunteers. Various l-amino acids were identified in the saliva. Furthermore, d-alanine (d-Ala) and d-proline (d-Pro) were also detected in relatively high concentrations (>5%). The ratio was higher in male saliva than in female saliva. However, the difference in the ratio of d-Ala for one day was not very high and the effect of foods and beverage seemed to be negligible. Based on the results using l-Ala-d₃, the d-Ala in saliva seemed to be produced due to the racemization with some enzymes such as racemase. The racemization reaction was reversible, i.e., d-Ala-d₃ was also racemized to l-Ala-d₃ in saliva. Thus, care should be taken during the analysis of dl-amino acids in saliva. The present method using DMT-(S)-Pro-OSu may be applicable for the determination of chiral amine metabolomics, because the resulting derivatives produce the same product ions without relation to the compounds and show highly sensitive detection in the SRM mode of MS/MS. Consequently, DMT-(S)-Pro-OSu seems to be a useful chiral derivatization reagent for the determination of amines and amino acids in biological samples.     

Novel chiral hexaazamacrocycles for the enantiodiscrimination of carboxylic acids

New enantiopure amines (R,R)-1 and (S,S)-1 were obtained from (R)- or (S)-2,2′-diamino-1,1′-binaphthyl and 2,6-diformylpyridine in a synthesis templated by lead(II) or lanthanide(III) ions, reduction with NaBH₄ and subsequent demetallation. Similarly new amines (R,R,R,R)-2 and (S,S,S,S)-2 were obtained from (1R, 2R)- or (1S, 2S)-1,2-diphenylethylenediamine. The X-ray crystal structure of the Pb(II) complex with macrocyclic Schiff base precursor of (R,R)-1 indicates helical twisted conformation of this macrocycle, while the ROESY spectrum of R,R-1 suggests less twisted conformation. (R,R)-1 and (R,R,R,R)-2 were tested as chiral shift reagents (chiral solvating agents) for various α-substituted carboxylic acids, including non steroidal anti-inflammatory drugs. Enantiodiscrimination of carboxylate ¹H NMR signals was observed with ΔΔδ values up to 0.1 ppm.     

Synthesis of new chiral fluorescent sensors and their applications in enantioselective discrimination

Five novel sensors (R,R)-3–6 and (S, S)-6 were synthesized and developed for enantioselective recognition of chiral compounds. Sensor 6 with two thiourea groups and steric π-conjugation frameworks could discriminate different chiral substrates, including acidic compounds, basic compounds, and neutral compounds. These results disclosed that the outstanding performance of enantioselective discrimination could be attributed to the thiourea group which acted as a hydrogen-bonding donor and the bulky steric moiety of the hosts which provided appropriate chiral environment. This result will be of great practical value in the designation of chiral sensors and high-throughput assay of chiral products.     

Preparation of a new crown ether-based chiral stationary phase containing thioester linkage for the liquid chromatographic separation of enantiomers

A new chiral stationary phase (CSP) containing thioester linkages was prepared by bonding (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid to mercaptopropylsilica gel. The chiral recognition ability of the new CSP was found to be greater than that of the previously reported CSP containing amide linkages in the resolution of the various α-amino acids that were tested, except for that of Met, Ser and Thr. In the resolution of racemic amines and amino alcohols, the new CSP was always better than the one containing amide linkages in terms of the separation factors (α) and the resolutions (R_S). Given the identical elution orders on the two CSPs, it was concluded that the chiral recognition mechanism is not affected by the change of the linkage type. In addition, the new CSP was found to be quite stable under the acidic mobile phase conditions that were utilized, indicating that the thioester linkage is useful as a tethering group.     

5-Amino-4-aryl-2,2-dimethyl-1,3-dioxans: application as chiral NMR shift reagents and derivatizing agents for acidic compounds

The use of (4S,5S)-5-amino-2,2-dimethyl-4-phenyl-1,3-dioxan (ADPD) and (4R,5R)-5-amino-(4′-biphenyl)-2,2-dimethyl-1,3-dioxan (ABDD) as chiral solvating agents (CSA) for the ee determination of compounds bearing an acidic proton by means of ¹H NMR spectroscopy is demonstrated. In addition, based on the well known rigid conformation of these amines, ADPD and ABDD are suitable as chiral derivatizing agents (CDAs) in order to determine absolute configurations.     

Comparison of chiral NMR solvating agents for the enantiodifferentiation of amines

Chiral, enantiomerically pure organic-soluble acids are often used as NMR chiral solvating agents (CSAs) for analyzing the enantiopurity of amines. However, the reports that describe CSAs for amines provide limited comparisons to other previously reported reagents. As such, it is difficult to know which among the many CSAs to pick when studying a new amine. We report a comparison of thirteen commercially available CSAs for the analysis of primary, secondary and tertiary amines in chloroform-d. (R)-α-methoxyphenylacetic acid, (R)-(-)-O-acetylmandelic acid, (R)-2-methoxy-2-(1-naphthyl)propionic acid and (R)-(-)-1,1′-binaphthyl-2,2′-diylhydrogenphosphate are identified as the best four to use as a starting point for the analysis of a new amine.     

Highly diastereoselective alkylation of vicinal dianions of chiral succinic acid derivatives: a new general strategy to (R)-β-arylmethyl-γ-butyrolactones

The vicinal dianions derived from chiral succinic acid derivatives, 1,4-bis[(4R,5S)-3,4-dimethyl-2-oxo-5-phenylimidazolidin-1-yl]butane-1,4-dione and 1,4-bis[(4S,5R)-3,4-dimethyl-2-oxo-5-phenylimidazolidin-1-yl]butane-1,4-dione react with arylmethyl bromides with high diastereo- and regio-selectivity to provide the corresponding chiral α-arylmethylated succinic acid derivatives; the (R)-products are converted into (R)-β-arylmethyl-γ-butyrolactones and (R)-α-arylmethyl-γ-butyrolactones.     

Improvement of chiral stationary phases based on cinchona alkaloids bonded to crown ethers by chiral modification

To improve the chiral recognition capability of a cinchona alkaloid crown ether chiral stationary phase, the crown ether moiety was modified by the chiral group of (1S, 2S)‐2‐aminocyclohexyl phenylcarbamate. Both quinine and quinidine‐based stationary phases were evaluated by chiral acids, chiral primary amines and amino acids. The quinine/quinidine and crown ether provided ion‐exchange sites and complex interaction site for carboxyl group and primary amine group in amino acids, respectively, which were necessary for the chiral discrimination of amino acid enantiomers. The introduction of the chiral group greatly improved the chiral recognition for chiral primary amines. The structure of crown ether moiety was proved to play a dominant role in the chiral recognitions for chiral primary amines and amino acids.     

Chiral nitrogen-containing calix[4]crown—an excellent receptor for chiral recognition of mandelic acid

A chiral nitrogen-containing calix[4]crown 2 bearing optically pure 1,2-diphenyl-1,2-oxyamino residue at lower rim showed excellent chiral recognition between enantiomers of mandelic acid. Using competitive ¹H NMR titration the ratio of association constants of (S)- and (R)-mandelic acid with the chiral calix[4]crown was determined to be 102, that is 98% de, which is the best result obtained from artificial receptors for the chiral recognition of mandelic acid up to now.     

New approach to exclusive formation of both enantiomers of β-amino acid derivatives

A highly selective two-step approach to chiral β-amino esters via the hydride reductive amination of chiral allenes is reported. β-Enamino esters were obtained from the nucleophilic addition of amines to 2,3-allenoates bearing a chiral auxiliary. The reduction of the (1R)-(−)-10-phenylsulfonylisobornyl β-enamino esters gave the corresponding β-amino esters with S configuration whereas the reduction of the (1S)-(+)-10-phenylsulfonylisobornyl β-enamino esters led to β-amino esters with R configuration. The rationalization of the observed selectivity was supported by semi-empirical molecular orbital calculations (PM3).     

Tandem enantioselective conjugate addition-Mannich reactions: efficient multicomponent assembly of dialkylzincs, cyclic enones and chiral N-sulfinimines

A convenient access to enantiopure β-amino ketones through a multicomponent reaction of dialkyl zinc reagents, cyclic enones and chiral N-tert-butanesulfinimines is disclosed. Four diastereoisomers can be selectively obtained by the appropriate choice of the chiral ligand (L or ent-L) and the chiral N-sulfinimine (R_S or S_S). The protocol is particularly efficient when enolisable N-sulfinimines are used.     

Chiral Carbon Nanorings: Synthesis,Properties and Hierarchical Self-assembly of Chiral Ternary Complexes Featuring a Narcissistic Chiral Self-Recognition for Chiral Amines

We report the synthesis and chiroptical properties of novel chiral carbon nanorings S p-/Rp-[12]PCPP containing a planar chiral [2.2]PCP unit, and demonstrate that S p-/Rp-[12]PCPP can not only host crown ether 18-Crown-6 to form ring-in-ring complexes with a binding constant 3.35×10³ M⁻¹, but also accommodate the complexes of 18-Crown-6 and S/R-protonated amines to form homochiral S @Sp -/ R @Rp - and heterochiral S @Rp -/ R @Sp - ternary complexes, displaying significantly larger binding constants of up to 3.31×10⁵ M⁻¹ depending on the chiral guests. Importantly, homochiral S @Sp -/ R @Rp - ternary complexes exhibit an enhanced CD signal, while the heterochiral S @Rp -/ R @Sp - ones have a constant CD signal compared with the chiral carbon nanorings, respectively, which suggests that homochiral S @Sp -/ R @Rp - ternary complexes display a highly narcissistic chiral self-recognition for S/R-protonated chiral amines, respectively. Finally, the chiral ternary complexes can be further applied to determine the ee values of chiral guests. The findings highlight a new application of carbon nanorings in supramolecular sensors, beyond the common recognition of π-conjugated molecules.     

Ti-mediated addition of diethylzinc to benzaldehyde. The effect of chiral additives

In the presence of a chiral tridentate bissulfonamide, the titanium-mediated addition of diethylzinc to benzaldehyde gave alkylated products ranging from the (R)-enantiomer, formed with an e.e. of 26%, to the (S)-enantiomer, formed in 72% e.e. The enantioselectivity was also affected by the presence of additional chiral mono- and bidentate ligands, with the reactions proceeding via complexes containing the chiral sulfonamide and the additive. The addition of (1R,2R)-1,2-diphenyl-1,2-ethanediamine and (1S,2S)-1,2-diphenyl-1,2-ethanediamine gave the (S)-product with e.e. of 49% and the (R)-product with 16% e.e., respectively, whereas without additives the (R)-product was obtained in 26% e.e. In the presence of (1R,2R)-1,2-diphenyl-1,2-ethanediamine only (i.e. without the chiral sulfonamide), the (S)-product formed with a 3% e.e.     

MM3 force field prediction of the enantioselective preference in the asymmetric synthesis of a chiral 2-cyclohexen-1-ol using a chiral lithium amide reagent

Enantioselective preference in the asymmetric synthesis where cyclohexene oxide is transformed enantioselectively to chiral (S)- or (R)-2-cyclohexen-1-ol by the reaction with the appropriate chiral lithium amide reagent has been evaluated theoretically using the MM3 force field. The plausible possible structures for each precursor (reaction intermediate complex) leading to a (S)- or (R)-2-cyclohexen-1-ol have been optimized with the extended MM3 force field applicable to the lithium amide functional group, and the populations of their (S)- or (R)-reaction intermediate complexes at an ambient temperature (298 K) were calculated. The initial structure for evaluating the reaction intermediates of this asymmetric synthesis was constructed on the basis of the optimized ab initio transition state structure (MP2/6-31+G^∗) comprising lithium amide LiNH₂ and propene oxide. To the thus obtained transition state structure composed of LiNH₂ and propene oxide, the other remaining Cartesian coordinates for the actual reaction intermediates composed of the chiral lithium amides and cyclohexene oxide were added to make the reaction intermediate structure. The conformational search for the reaction intermediate has been carried out by using the Stochastic search Algorithm, and the optimized geometries and their conformational energies (steric energies) have been calculated by the MM3 force field. The populations calculated from the conformational energies of the reaction intermediate leading to the (S)- or (R)-2-cyclohexen-1-ol were shown to be linearly well correlated with the experimentally reported enantiomer excess (% ee) values. The critical factors to control the enantioselectivity were investigated on the basis of the optimized structures of the reaction intermediate complexes. The MM3 force field approach was shown to be applicable to the theoretical evaluation of the enantioselectivity and be useful for designing a new functional chiral lithium amide reagent for the asymmetric synthesis.     

Rhodium complexes with chiral counterions: achiral catalysts in chiral matrices

The neutral complexes [Rh(I)(NBD)((1S)-10-camphorsulfonate)] (2) and [Rh(I)((R)-N-acetylphenylalanate)] (4) reacted with bis-(diphenylphosphino)ethane (dppe) to form the cationic Rh(I)(NBD)(dppe) complexes, 5 and 6, respectively, accompanied by their corresponding chiral counteranions. Analogously, 4 reacted with 4,4^′-dimethylbipyridine to yield complex 7. Complexes 5 and 6 disproportionated in aprotic solvents to form the corresponding bis-diphosphine complexes 8 and 9, respectively. 8 was characterized by an X-ray crystal structure analysis. In order to form achiral Rh(I) complexes bearing chiral countercations new sulfonated monophosphines 13-16 with chiral ammonium cations were synthesized. Tris-triphenylphosphinosulfonic acid (H₃TPPS, 11) was used to protonate chiral amines to yield chiral ammonium phosphines 14-16. Thallium-tris-triphenylphosphinosulfonate (Tl₃TPPS, 12) underwent metathesis with a chiral quartenary ammonium iodide to yield the proton free chiral ammonium phosphine 13. Phosphines 15 and 16 reacted with [Rh(NBD)₂]BF₄ to afford the highly charged chiral zwitterionic complexes [Rh(NBD)(TPPS)₂][(R)-N,N-dimethyl-1-(naphtyl)ethylammonium]₅ (17) and [Rh(NBD)(TPPS)₂][BF₄][(R)-N,N-dimethyl-phenethylammonium]₆ (18), respectively. Complexes 5, 6, and 18 were tested as precatalysts for the hydrogenation of de-hydro-N-acetylphenylalanine (19) and methyl-(Z)-(α)-acetoamidocinnamate (MAC, 20) under homogeneous and heterogeneous (silica-supported and self-supported) conditions. None of the reactions was enantioselective.     

Imidazolium-based chiral ionic liquids: synthesis and application

Synthesis of chiral ionic liquids containing an imidazole nucleus and chiral centers on N-substituents is reported. [(2S,3S)-2,3-Dihydroxybutane-1,4-bis(3-butylimidazolium)]-[bis(trifluoromethanesulfonyl)amide]₂ and [(4S,5S)-2-phenyl-1,3-dioxolane-4,5-bis(1-methylimidazolium)]-[bis(trifluoromethanesulfonyl)amide]₂ induced enantioselectivity in the Michael addition of malonic esters to chalcones.     

Preparation and temperature-dependent enantioselectivities of homochiral phenolic crown ethers having aryl chiral barriers: thermodynamic parameters for enantioselective complexation with chiral amines

Homochiral crown ether (S,S)-1 containing 1-naphthyl groups as chiral barriers together with the phenol moiety was prepared by using (S)-3 as a chiral subunit which was resolved in enantiomerically pure form by lipase-catalyzed enantioselective acylation of (±)-3. Homochiral phenolic crown ether (S,S)-2, containing phenyl groups as chiral barriers, was also prepared from (S)-5 which was derived from (S)-mandelic acid. The association constants for their complexes with chiral amines in CHCl₃ were determined at various temperatures by the UV–visible spectroscopic method demonstrating that the crown ethers (S,S)-1 and (S,S)-2 displayed the large Δ_R−SΔG values of 6.2 and 6.4 kJ mol⁻¹, respectively, towards the amine 21 at 15°C. Thermodynamic parameters for complex formation were also determined and a linear correlation between TΔ_R−SΔS and Δ_R−SΔH values was observed.     

Chromatographic separation and enantiomeric resolution of flurbiprofen and its major metabolites

Summary The chromatographic separation and resolution of the enantiomers of flurbiprofen and its two major metabolites, 4′-hydroxyflurbiprofen and 3′-hydroxy-4′-methoxyflurbiprofen was investigated using four different approaches: reversed-phase HPLC after pre-column derivatization with (R)-1-(naphthen-1-yl)ethylamine; reversed-phase HPLC using hydroxypropyl-β-cyclodextrin as a chiral mobile phase additive; chiral-phase HPLC using either an α₁-acid glycoprotein CSP (Chiral-AGP) or an amylose tris(3,5-dimethylphenylcarbamate) CSP (Chiralpak AD). Of all the approaches, only the direct method using the Chiralpak AD CSP demonstrated separation and enantiomeric resolution of all three analytes within an acceptable run time of 45 minutes. Enantiomeric resolution values of 1.67,3.67 and 3.44 were obtained for flurbiprofen, 4′-hydroxyflurbiprofen and 3′-hydroxy-4′-methoxyflurbiprofen respectively. Semi-preparative isolation of the individual enantiomers of both metabolites, followed by CD analysis, revealed that the elution order on the AD CSP wasR-beforeS-enantiomer for both metabolites and the same as that observed for flurbiprofen. The metabolite elution order was subsequently confirmed on the analysis of urine samples obtained from a healthy volunteer following oral administration of the individual drug enantiomers.     

Synthesis and structural characterization of chiral dicationic imidazolophanes

Various chiral dicationic benzimidazolophanes were obtained from optically pure (S)-BINOL, benzimidazole and a suitable aryl alkyl dibromide.     

Synthesis and characterization of fluorinated liquid-crystalline elastomers containing chiral liquid-crystalline crosslinking units

Fluorinated chiral liquid-crystalline elastomers (LCEs) were graft copolymerized by a one-step hydrosilylation reaction with polymethylhydrogenosiloxane, a fluorinated LC monomer 4-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)phenyl 4-(undec-10-enoyloxy)benzoate (PPUB) and a chiral crosslinking LC monomer (3R,3aR,6S,6aR)-6-(undec-10-enoyloxy)hexahydrofuro[3,2-b]furan-3-yl 4′-(4-(allyloxy)benzoyloxy)biphenyl-4-carboxylate (UHAB). The chemical structure, liquid-crystalline behavior and polarization property were characterized by use of various experimental techniques. The effective crosslink density of the LCEs was characterized by swelling experiments. The thermal analysis results showed that the temperatures at which 5% weight loss occurred were greater than 250 °C for all the LCEs, and the residue weight nearby 600 °C increase with increasing chiral crosslinking components in the polymer systems. All the samples showed chiral smectic C mesophase when they were heated. The glass transition temperature and mesophase-isotropic phase transition temperature of fluorinated elastomers increased slightly with increase of chiral crosslinking mesogens in the polymer systems, but the enthalpy changes of mesophase-isotropic phase transition decreased slightly. In XRD curves, all the samples exhibited strong sharp reflections at small angles suggesting smectic layered packing arrangement. These fluorinated chiral LCEs showed 0.1–0.2 μC/cm² of spontaneous polarization with increasing chiral crosslinking component.