Carbazole-based Schiff base: A sensitive fluorescent ‘turn-on’ chemosensor for recognition of Al(III) ions in aqueous-alcohol media

Carbazole-based Schiff base chemosensor was synthesized in one-pot synthesis using 2-hydroxy-1-naphtaldehyde for fluorescent sensing of Al³⁺ ions. Characterization of the ligand (L) was revealed through spectroscopic and physicochemical techniques. The fluorescence emission responses of L to various metal ions and anions were investigated. The chelation was studied by UV–vis, ¹H NMR, LC-MS/MS, fluorescence titration and Job’s plot analysis. Bathochromic shift resulted from charge transfer from L to electrophilic Al³⁺ ion was observed in the chelation of L with Al³⁺. The potentiality of L to be a distinguished probe to detect Al³⁺ ions was due to a chelation enhanced fluorescence (CHEF) effect, concomitant with noticeable fluorescent enhancement. A significant fluorescence enhancement at 533 nm was observed in ethanol–water (1:1, v/v) solution upon addition of Al³⁺ along with a distinct color change from yellow to white. Non-fluorescent ligand exposed highly sensitive turn-on fluorescent sensor behavior for selectively sensing Al³⁺ ions via 1:1 (ligand:metal) stoichiometry. The ligand’s specificity in the existence of other tested metal ions and anions indicated no observation in color change. The ligand-Al³⁺ complex formation was reversible upon addition of chelating agent EDTA. The ligand interacted with Al³⁺ ions with an association constant of K_a = 5 × 10⁴ M^?1. The limit of detection (LOD) was found to be 2.59 × 10^-7 M. The synthesized Schiff base could efficiently detect Al³⁺ ions as a fluorescent sensor.     

Bis-ratiometric absorbance detection of Al(III) in the rhodamine B-functionalized bis-polydiacetylene film

A rhodamine B-functionalized bis-polydiacetylene (RB/bis-PDA) film sensor was prepared. Rhodamine B derivatives as the ion-recognition elements were embedded in the bis-polydiacetylene matrix through the hydrolysis/condensation process of organic silicon. The as-prepared blue-phase RB/bis-PDA film could transfer to yellow phase at high temperatures. Upon dipping the blue and yellow RB/bis-PDA films into various metal ion solutions, respectively, only Al³⁺ could induce remarkable changes in absorption and color signals. The UV–Vis absorption spectrum of the Al³⁺-containing film showed two separate absorption peaks at 556 nm and at another wavelength (617 or 470 nm), corresponding to ring opening of the spirolactam structure in rhodamine moiety and PDA (blue- or yellow-phase PDA), respectively. Utilizing the different intensity ratios of the two absorption signals (A₅₅₆/A₆₁₇ or A₅₅₆/A₄₇₀), the RB/bis-PDA system could be used as a bis-ratiometric absorbance sensor for Al³⁺. The reusable and free-standing films have great potential in environmental and biological sensing fields as they are more convenient to achieve real-time sensing than the conventional probes dissolved in aqueous or organic solvents.     

Spectroscopic approaches to the study of the interaction of aluminum with humic substances

Aluminum ion (Al³⁺) in the ‘free’ (aquo) state is becoming increasingly prevalent in environmental waters, especially fresh waters, as a consequence of acid rain and other environmental processes. As Al³⁺ ion is known to affect markedly a wide range of biological systems, and since the presence of Al³⁺ in humans has been linked to a number of human diseases, it is important to understand the speciation of Al³⁺ ion in natural waters. Since some of the most important complexation agents for Al³⁺ in both fresh and sea waters are members of the complex humic substances group, it is important to understand the manner in which Al³⁺ interacts with this class of molecules, especially since binding of Al³⁺ to these molecules can effectively increase the bioavailability of this toxic metal ion to biological systems. The objective of this review is to present the current state of our understanding of aqueous aluminum complexation with the most acidic members (and therefore the most likely candidates for serving as Al³⁺ complexing agents) of the humic substances group, the fulvic acids. Much of the current knowledge has been revealed by comprehensive fluorescence titration analyses. Some additional information has come from other experimental approaches, including infrared spectroscopy, nuclear magnetic resonance spectroscopy, and a variety of electrochemical approaches. In this review, we also report on the results of our recent fluorescence and IR spectroscopy survey of the interaction of metals from of all three Nieboer and Richardson categories of environmental metals (Class A, Class B and Intermediate Class) with the fulvic acid sub-group of the humic substances. This has proven helpful in understanding some of the unique spectral behaviors of the Al³⁺-fulvic acid complex vis-a-vis fulvic acid complexes with many other metal ions. The results of our fluorescence and IR experiments with the model compounds, such as salicylic and phthalic acids, have allowed confirmation of the important roles played by both salicylic acid-like sites and phthalic acid-like sites in the unique complexation of Al³⁺ to humic substances, and help to explain some of the observed spectroscopic changes associated with Al³⁺ ion complexation to humic material. From the current work, it seems clear that major sources of the deviation in spectral properties between Al³⁺ and many other metal ions (across all three Nieboer and Richardson categories) are the unusually high value of its charge density and relatively low propensity for involvement in covalent bonding interactions (i.e. a very high ionic index combined with a relatively low covalent index in the Nieboer and Richardson classification of environmental metals), as well as affinity for certain functional groups.     

Selective sensing of Cu2+ ion by naphthalene based Schiff base

Research is going on to synthesize materials for acting as sensors of metal ions and are also published in different journals but the cause for sensing has not been clearly explained. In this paper, the reason for selective sensing of Cu²⁺ ions has been explained. A novel Schiff base fluorescent probe 3-[(2-hydroxy-naphthalen-1-ylmethylene)-hydrazono]-butan-2-one oxime (NPTH) was designed and synthesized to use as Cu²⁺ sensor. From our recent experiments, it has been found that only Cu²⁺ among different metal ions has been sensed by the synthesized ligand. The reason for selection and sensing of Cu²⁺ by the ligand was established by different spectroscopic techniques. The detection limit of NPTH was calculated as low as 4.11 ​× ​10^-4M for Cu²⁺. Therefore, these results indicate that sensor NPTH has great prospective to detect Cu²⁺ ion in environmental analysis systems. Density functional theory (DFT) calculations have been done to ascertain the ground state geometry of NPTH.     

Speciation analysis of aluminium and aluminium fluoride complexes by HPIC-UVVIS

The study presents a new analytical method for speciation analysis in fractionation of aluminium fluoride complexes and free Al³⁺ in soil samples. Aluminium speciation was studied in model solutions and soil extract samples by means of high performance ion chromatography (HPIC) with UV-VIS detection using post-column reaction with tiron for the separation and detection of aluminium fluoride complex and Al³⁺ forms during one analysis. The paper presents particular stages of the chromatographic process optimization involving selecting the appropriate eluent strength, type of elution or concentration and quantity of derivatization reagent. HPIC was performed on a bifunctional analytical column Dionex IonPac CS5A. The use of gradient elution and the eluents A: 1 M NH₄Cl and B: water acidified to pH of eluent phase, enabled full separation of fluoride aluminium forms as AlF₂⁺, AlF₃⁰, AlF₄⁻ (first signal), AlF²⁺ (second signal) and form Al³⁺ in a single analytical procedure. The proposed new method HPIC-UVVIS was applied successfully in the quantitative and qualitative analysis of soil samples.     

Synthesis, structural characterization and antibacterial activity of 2,6-diacetylpyridine bis(benzenesulfonohydrazide) Schiff bases and their copper(II) complexes

2,6-Diacetylpyridine bis(benzenesulfonohydrazide) Schiff bases (L¹, L² and L³) and their Cu(II) complexes of the general formula [CuL·H₂O] were synthesized and characterized by various spectroscopic techniques. The crystal structure of [CuL³·(py)]·py was investigated by single crystal X-ray structure analysis. The Cu(II) cation has near square pyramidal, penta-coordinate geometry. The binegatively charged tetradentate Schiff base is asymmetrically coordinated to the Cu(II) ion via the pyridine N atom, the azomethine N atom, the sulfonyl O atom and the deprotonated hydrazine N atom. There is a pyridine molecule apically coordinated to the Cu(II) ion. All the Schiff bases and their copper(II) complexes were screened by the disc diffusion method against multi-drug resistant (MDR) gram-negative and gram-positive bacteria. The minimum inhibitory concentration (MIC) values were also determined. These results show that the antibacterial activity of the Schiff bases against Methicillin-resistant Staphylococcus aureus (MRSA) is enhanced when they are chelated with the copper(II) ion.     

Synthesis,characterization and applications of schiff base chemosensor for determination of Cu2+ ions

A novel thiazole-based Schiffbase chemosensor SB1 with N- and O- donor atoms was synthesized and characterized by different techniques (UV–vis, ¹³C NMR, ¹H NMR, and FT-IR analysis). The chemosensor SB1 was used for the determination of Cu²⁺ ions in various samples. The significant spectral changes in absorption spectra of chemosensor SB1 at 220 and 416 nm and the color change from light yellow to yellowish-brown indicate high selectivity and sensitivity towards Cu²⁺ ions as compared to other cations (Na⁺, K⁺, Ag⁺, Zn²⁺, Ni²⁺, Pb²⁺, Mn²⁺, Mg²⁺, Co²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Cr³⁺, Fe^3+, and Al³⁺). The sensing mechanism of SB1 was investigated through various techniques such as FT-IR, UV–vis and ¹H NMR titration experiment and further confirmed by DFT computational studies. The 2:1 binding mode between SB1 and Cu²⁺ ions was confirmed by Job‘s plot using UV–vis spectrophotometry. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.015 and 0.0471 µg mL^?1, respectively. The percent recovery of Cu²⁺ from various environmental samples was found to be 95.00–103.33% at various levels. These obtained results demonstrate that chemosensor SB1 is a cost-effective, facile, selective, sensitive, and colorimetric sensing platform to detect trace amounts of Cu²⁺ ions in variousenvironmental and agricultural samples.     

Synthesis and characterization of biologically active new Schiff bases containing 3‐functionalized 1,2,4‐triazoles and their zinc(II) complexes: crystal structure of 4‐bromo‐2‐[(E)‐(1H‐1,2,4‐triazol‐3‐ylimino)‐ methyl]phenol

Biologically active triazole Schiff bases ( L ¹  L ³ ) derived from the reaction of 3‐amino‐1,2,4‐triazole with chloro‐, bromo‐ and nitro‐ substituted salicylaldehydes and their Zn(II) complexes (1–3) have been synthesized and characterized by their physical, spectral and analytical data. Triazole Schiff bases potentially act as tridentate ligands and coordinate with the Zn(II) metal atom through salicylidene‐O, azomethine‐N and triazole‐N. The complexes have the general formula [M(L‐H)₂], where M = zinc(II) and L = ( L ¹ – L ³ ), and observe an octahedral geometry. The Schiff bases and their Zn(II) complexes have been screened for in‐vitro antibacterial, antifungal and brine shrimp bioassay. The biological activity data show the Zn(II) complexes to be more potent antibacterial and antifungal than the parent simple Schiff bases. Copyright © 2011 John Wiley & Sons, Ltd.     

Rare earth ions-enhanced gold nanoclusters as fluorescent sensor array for the detection and discrimination of phosphate anions

The discrimination and detection of phosphate anions have attracted extensive attention due to their important roles in various biological processes. Compared with sensors to detect one individual phosphate at a time, sensor arrays are able to discriminate multiple phosphates simultaneously. In this study, we developed a rare earth ions enhanced AuNCs-based sensor array to achieve facile and rapid identification of phosphate anions (PPi, ADP and ATP). The rare earth ions (i. e., Ce³⁺, Gd³⁺, Tm³⁺ and Yb³⁺) can significantly enhance the fluorescence of AuNCs through aggregation-induced emission effect. And the subsequent addition of phosphate anions can recover the fluorescence of the AuNCs-rare earth ions assembly. Thanks to the different numbers of phosphate group and different steric hindrance effects of phosphate anions, the recovery fluorescence of AuNCs-rare earth ions assembly induced by PPi, ADP or ATP are respectively distinct. Thus the sensor array composed of AuNCs and different rare earth ions is able to distinguish those phosphate anions. Finally, the sensor array was successfully demonstrated to identify the phosphates in blind samples.     

Ionic liquids as precursors for highly luminescent,surface-different nitrogen-doped carbon dots used for label-free detection of Cu/Fe and cell imaging

Carbon nanodots (C-Dots) have attracted much attention in recent years due to their low cost, ready scalability, excellent chemical stability, biocompatibility and multicolor luminescence. Here, we report a facile strategy for producing highly luminescent, surface-different nitrogen-doped carbon dots (C-Dots) by using different ionic liquids (ILs). Intriguingly, the surface-different C-Dots show different selectivity for Cu²⁺ and Fe³⁺. To the best of our knowledge, this is the first example which shows that ILs are excellent precursors for producing luminescent nanomaterial used for detection of different metal ions. The resultant nitrogen-doped C-Dots are highly photoluminescent and can be used for multicolor bioimaging. Most notable, by taking different ILs as precursors, we obtain surface-different C-Dots, which can be directly used for selective detection of Cu²⁺ and Fe³⁺ without any modification. These C-Dots based sensors exhibit high sensitivity and selectivity and the sensing process can be easily accomplished with one-step rapid operation. More importantly, compared with other method using QDs, organic dyes and organic solvent, this strategy is much more eco-friendly. This work may offer a new approach for developing low cost and sensitive C-Dots-based sensors for biological and environmental applications.     

Novel 2-hydroxynaphthalene-based fluorescent turn-on sensor for highly sensitive and selective detection of Al3+ and its application in imaging in vitro and in vivo

Excessive aluminum exposure in the human body has been held responsible for multiple adverse effects, and existing data underscore the significance of aluminum detection in environmental and biological systems. Developing high-performance Al³⁺ fluorescent chemosensors can revolutionize our understanding of the physiological and pathological processes of Al³⁺ ions. Herein, we reported a highly sensitive and selective Schiff base fluorescence sensor, bis-NAPPD (1,1'-((1E,1'E)-(pyridine-2,3-diylbis(azanylylidene))bis(methanylylidene))bis(naphthalen-2-ol)), which can recognize Al³⁺ ions and exhibits a remarkable turn-on dual emission response (by ~23 fold) with a low nanomolar level detection limit (1.67 × 10⁻⁸ M) in methanol. Furthermore, the binding behavior and the turn-on fluorescence probing mechanism of bis-NAPPD were illustrated in detail by UV–vis titration, ¹H NMR, and ESI-MS spectroscopy as well as density functional theory calculations. Notably, bis-NAPPD showed great potential for tracing Al³⁺ distribution in cells and living zebrafish larvae, and can also be applied in the fluorimetric detection of aluminum in sucralfate tablets with good precision and satisfactory accuracy, which may represent a promising Al³⁺ probe in bioimaging and biomedical applications.     

BODIPY Immobilized MCM-41 Based Multianalyte Sensor: Application in Detection and Removal of Trivalent (Al3+, Cr3+) and Divalent (Cu2+, Hg2+) Metal Ions in Aqueous Media

In the present study, a novel p-phenylcarboxylic acid BODIPY ( L ) immobilized MCM-41 based solid chemosensor material L-propylsilyl@MCM-41 ( MS4 ) was developed to detect multiple metal ions in a pure aqueous medium. The synthesized solid chemosensor material MS4 shows high sensitivity and removal ability towards trivalent (Al³⁺, Cr³⁺) and divalent (Cu²⁺, Hg²⁺) metal ions. The emission intensity of MS4 enhanced multifold selectively in the presence of trivalent (Al³⁺, Cr³⁺) metal ions and shows quenching in the presence of divalent (Cu²⁺, Hg²⁺) metal ions. The limit of detection was calculated to be in the nanomolar range with Al³⁺, Cr³⁺, Cu²⁺_, and Hg²⁺ metal ions in the aqueous medium. The spectroscopic and analytical results suggest that MS4 selectively binds with Al³⁺ and Cr³⁺ through −NH functionality and with Hg²⁺ and Cu²⁺ through −COOH functionality of p-phenylcarboxylic acid BODIPY ( L ). Further, MS4 selectively removes Al³⁺, Cr³⁺, Cu²⁺, and Hg²⁺ metal ions from the aqueous media with removal efficiency of 97.28 %, 96.34 %, 87.19 %, and 95.63 %, respectively. No noticeable change in the concentration was observed for other metal ions. The recycling potential of MS4 was evaluated using EDTA for up to seven cycles with no significant reduction in sensing capability.     

Fluorescence sensor using a molecularly imprinted polymer as a recognition receptor for the detection of aluminium ions in aqueous media

This paper describes the investigation of a molecularly imprinted polymer (MIP) as a sensing receptor for Al³⁺ ion detection by using an optical approach. Al³⁺ ion was adopted as the template molecule and 8-hydroxyquinoline sulfonic acid ligand as the fluorescence tag. The polymer was synthesised using acrylamide as monomer, 2-hydroxyethyl methacrylate as co-monomer and ethylene glycol dimethracylate as cross-linker. The free radical polymerisation was performed in methanol and initiated by 2,2′-azobisisobutyronitrile at 70 °C. The imprinted polymer was fluorometrically characterised using a fibre optic attachment in a self-designed flow-cell. NaF was used to leach the Al³⁺ ion from the MIP. The optimum pH for the rebinding of Al³⁺ ion with the leached polymer was found to be pH 5 and the fluorescence response was found to be stable within the buffer strength range of 0.05–0.10 M. The fluorescence intensity during Al³⁺ ion rebinding was inversely dependent on temperature, and a low interference response (<3%) toward metal ions except for Cu²⁺ and Zn²⁺ ions was observed. The polymer rebinding repeatability study conducted over 9 cycles with Al³⁺ ion (0.8×10⁻⁴ M) was found to give an RSD value of 2.82% with a standard deviation of 0.53. The dynamic range of the system was found to be linear up to 1.0×10⁻⁴ M Al³⁺ ion with a limit of detection of 3.62 μM.     

Fluorescent and colourimetric 1, 8-naphthalimide-appended chemosensors for the tracking of metal ions: selected examples from the year 2010 to 2017

The global sensing science in the past couple of years has seen brilliant successes in the designs and syntheses of diverse fluorescent and colourimetric chemosensors of ultra-high selectivities and sensitivities for the tracking of metal ions in environmental and biological systems. Amongst the most widely employed fluorophores for the development of fluorescent and colourimetric chemosensors is the 1, 8-naphthalimide fluorophore, which is distinctive due to its possession of outstanding photophysical properties unequalled by other fluorophores. Many reported literatures are replete with employment of 1, 8-naphthalimide as a unique fluorophore for the construction of chemosensors for the monitoring of metal ions (such as Cu²⁺, Hg²⁺, Cr³⁺, Fe³⁺, Zn²⁺, Ag⁺, Pd²⁺, Al³⁺, Ba²⁺, Au³⁺, and Bi²⁺, and/or a combination of any of them) with remarkable results documented from various labs. This review summarises recent advances in the development of representative fluorescent and colourimetric 1, 8-naphthalimide-based chemosensors reported within the past 7 years. It is believed that gaining insights into the various highlighted examples would help to refine our knowledge of the field and pave the way for further advancement in the constructions of fluorescent and colourimetric 1, 8-naphthalimide-based chemosensors of improved sensing parameters and practical application values.     

Fluorescent oligomer as a chemosensor for the label-free detection of Fe and dopamine with selectivity and sensitivity

In this article, a sensitive and selective turn-off fluorescence chemosensor, Tyloxapol (one kind of water soluble oligomer), was developed for the label-free detection of Fe³⁺ ions in aqueous solution. Fluorescence (FL) experiments demonstrated that Tyloxapol was a sensitive and selective fluorescence sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, K⁺, Ag⁺, Hg²⁺, Cd²⁺, Co²⁺, Cu²⁺, Cr³⁺, Mn²⁺, Ba²⁺, Zn²⁺, Ni²⁺, Mg²⁺, Ca²⁺, and Pb²⁺. Moreover, the fluorescence intensity of Tyloxapol has shown a linear response to Fe³⁺ in the concentration range of 0–100 μmol L⁻¹ with a detection limit of 2.2 μmol L⁻¹ in aqueous solution. Next, based on a competition mechanism, another turn-on sensing application of the Tyloxapol/Fe³⁺ platform to probe dopamine (DA) against various other biological molecules such as other neurotransmitters or amino acids (norepinephrine bitartrate, acetylcholine chloride, alanine, valine, phenylalanine, tyrosine, leucine, glycine, histidine) were also investigated. It is expected that our strategy may offer a new approach for developing simple, cost-effective, rapid and sensitive sensors in biological and environmental applications.     

Enhancement of charge transfer rate at mixed morphology TiO2/graphene interface by Al3+

Applying conductive coatings on the surface of non-conductive materials can effectively reduce the hazards caused by static electricity during the production process. However, commercially available TiO₂ conductive powder relies on rare minerals and produces waste acids and bases. Therefore, we prepared Al-doped TiO₂/graphene composites, which combine the advantages of TiO₂ homojunction, ion doping, heterojunction, and rod morphology with excellent electrical conductivity (0.161 Ω·cm). In particular, the doping of Al³⁺ doubles its conductivity. This is due to the introduction of Al³⁺, which generates oxygen vacancies and so increases the carrier concentration. Furthermore, the introduction of Al³⁺ generates new conductive pathways (Al–O–C) and increases the content of highly electrochemically active oxygen-containing functional groups, leading to a significant enhancement of carrier transfer efficiency. Accordingly, the enhanced carrier concentration and transfer efficiency enhance the conductive properties of T-G-Al and provide new ideas for the preparation of conductive coatings.     

Probes and Polymers for Optical Sensing of Oxygen

Oxygen detection techniques are used in various fields, such as chemical or clinical analysis and environmental monitoring. Recently, a variety of devices and sensors based on photo-luminescent or photoexcited state quenching of organic dyes have been developed to measure oxygen partial pressure on the solid surface. Many optical oxygen sensors are composed of organic dyes, such as polycyclic aromatic hydrocarbons (pyrene, pyrene derivative etc.), transition metal complexes (Ru²⁺, Os²⁺, Ir³⁺ etc.), metalloporphyrins (Pt²⁺, Pd²⁺, Zn²⁺ etc.) and fullerene (C₆₀ and C₇₀) immobilized in oxygen permeable polymer films. In this review, the properties of various oxygen permeable polymers for matrix of optical oxygen sensor and various dye probes for oxygen sensing are described.Received November 19, 2002; accepted May 14, 2003 published online August 22, 2003     

Aminoquinoline based highly sensitive fluorescent sensor for lead(II) and aluminum(III) and its application in live cell imaging

We have synthesized a new probe 5-((anthracen-9-ylmethylene) amino)quinolin-10-ol (ANQ) based on anthracene platform. The probe was tested for its sensing behavior toward heavy metal ions Hg²⁺, Pb²⁺, light metal Al³⁺ ion, alkali, alkaline earth, and transition metal ions by UV–visible and fluorescent techniques in ACN/H₂O mixture buffered with HEPES (pH 7.4). It shows high selectivity toward sensing Pb²⁺/Al³⁺ metal ions. Importantly, 10-fold and 5- fold fluorescence enhancement at 429 nm was observed for probe upon complexation with Pb²⁺ and Al³⁺ ions, respectively. This fluorescence enhancement is attributable to the prevention of photoinduced electron transfer. The photonic studies indicate that the probe can be adopted as a sensitive fluorescent chemosensor for Pb²⁺ and Al³⁺ ions.     

Integration of spore-based genetically engineered whole-cell sensing systems into portable centrifugal microfluidic platforms

Bacterial whole-cell biosensing systems provide important information about the bioavailable amount of target analytes. They are characterized by high sensitivity and specificity/selectivity along with rapid response times and amenability to miniaturization as well as high-throughput analysis. Accordingly, they have been employed in various environmental and clinical applications. The use of spore-based sensing systems offers the unique advantage of long-term preservation of the sensing cells by taking advantage of the environmental resistance and ruggedness of bacterial spores. In this work, we have incorporated spore-based whole-cell sensing systems into centrifugal compact disk (CD) microfluidic platforms in order to develop a portable sensing system, which should enable the use of these hardy sensors for fast on-field analysis of compounds of interest. For that, we have employed two spore-based sensing systems for the detection of arsenite and zinc, respectively, and evaluated their analytical performance in the miniaturized microfluidic format. Furthermore, we have tested environmental and clinical samples on the CD microfluidic platforms using the spore-based sensors. Germination of spores and quantitative response to the analyte could be obtained in 2.5–3 h, depending on the sensing system, with detection limits of 1 × 10⁻⁷ M for arsenite and 1 × 10⁻⁶ M for zinc in both serum and fresh water samples. Incorporation of spore-based whole-cell biosensing systems on microfluidic platforms enabled the rapid and sensitive detection of the analytes and is expected to facilitate the on-site use of such sensing systems.     

Aminobenzohydrazide based colorimetric and ‘turn-on’ fluorescence chemosensor for selective recognition of fluoride

Chemosensors based on aminobenzohydrazide Schiff bases bearing pyrene/anthracene as fluorophores have been designed and synthesized for F⁻ ion recognition. The addition of fluoride ions to the receptors causes a dramatically observable colour change from pale yellow to brown/red. ¹H NMR studies confirm that the F⁻ ion facilitates its recognition by forming hydrogen bond with hydrogens of amide and amine groups. Moreover these sensors have also been successfully applied to detection of fluoride ion in commercial tooth paste solution.