Evaluation of Co/SSZ-13 Zeolite Catalysts Prepared by Solid-Phase Reaction for NO-SCR by Methane

Co/SSZ-13 zeolites were prepared by heating the finely dispersed mixture of NH₄-SSZ-13 and different cobalt salts up to 550 °C. Investigations by thermogravimetry – differential scanning calorimetry – mass spectrometry provided new insight into details of the solid-state reaction. Formation of Co carrying hydrate melt or volatile species was shown to proceed from chloride, nitrate, or acetylacetonate Co precursor salts upon thermal treatment. This phase change allows the transport of the Co species into the zeolite pores. The reaction of the NH₄⁺ or H⁺ zeolite cations and the mobile Co precursors generates vapor or gas products, readily leaving the zeolite pores, and cobalt ions in lattice positions suggesting that solid-state ion-exchange is the prevailing process. The obtained catalysts are of good activity and N₂ selectivity in the CH₄/NO-SCR reaction. The thermal treatment of acetate or formate salts give solid intermediates that are unable to get in contact and react with the cations in the zeolite micropores. These catalysts contain mainly Co-oxide clusters located on the outer surface of the zeolite crystallites and have poor catalytic performance.     

氟硅酸铵改性纳米HZSM-5分子筛催化甲醇制丙烯

在静态条件下, 采用不同浓度的氟硅酸铵溶液对纳米ZSM-5分子筛进行了改性处理. 利用粉末X射线衍射(XRD)、²⁷Al 魔角旋转固体核磁共振(²⁷Al MAS NMR)、X射线荧光光谱(XRF)、X射线光电子能谱(XPS)、N₂ 吸附、透射电镜(TEM)、NH₃程序升温脱附(NH₃-TPD)、吡啶吸附红外光谱(Py-IR)等技术对改性前后纳米ZSM-5分子筛的骨架结构、织构性质、酸性质进行了表征. 并在常压、反应温度为450℃、甲醇质量空速(WHSV)为1 h^-1的条件下, 研究了改性前后纳米HZSM- 的甲醇制丙烯(MTP)催化性能. 结果表明, 合适浓度的氟硅酸铵处 理能够选择性地脱除纳米ZSM-5 分子筛的外表面铝, 从而使得HZSM-5 的酸密度降低, 比表面积和孔容增大, MTP催化性能显著提高. 氟硅酸铵改性后纳米HZSM-5 的丙烯选择性和丙烯/乙烯(P/E)质量比分别由原来的 28.8%和2.6提高到45.1%和8.0, 催化剂寿命增加了近2倍.     

Modification of active carbon and zeolite as ammonia separation materials for a new de-NO<Subscript>x</Subscript> process with ammonia on-site synthesis

Ammonia adsorption and desorption behavior of surface treated active carbon (AC) and ion-exchanged Y zeolite, as ammonia separation and storage materials for a new de-NO_x process with ammonia on-site synthesis, were studied. Surface oxidized AC adsorbed more ammonia than non-treated AC due to ammonium ion formation. These materials were found to increase weak adsorption of ammonia and to be useful for pressure swing adsorption. Transition metal ion exchanged Y-zeolite adsorbed more ammonia (both weak and strong form) than Na Y-zeolite due to ammine complex formation. These materials adsorb and desorb more ammonia than treated AC when used for temperature swing adsorption.     

Characterization of UO 2 2+ exchanged Y zeolite

The present study discusses the incorporation of uranyl ion into Y-zeolite framework. The UO ₂ ²⁺ sorption was measured by neutron activation analyses. The Y-zeolite framework distorts in response to the cations present in the structure. Hence, depending on the amount and the location of the exchanged cations, the features of the X-ray diffraction pattern may vary. From the Rietveld analysis of these patterns, the positions occupied by the UO ₂ ²⁺ cations in the zeolite network were determined.     

Zeolite and potting soil sorption of CO2 and NH3 evolved during co-composting of grape and tobacco waste

The gaseous byproducts produced during the composting of different kinds of solid waste are carbon dioxide (CO₂) and ammonia (NH₃). CO₂ is a greenhouse gas and NH₃ is a toxic and corrosive air pollutant so, they must be removed from exhaust gases prior to release into the atmosphere. The purpose of this work was to investigate the sorption of CO₂ and NH₃, evolved during composting, on zeolite and potting soil. The composting of the mixture of grape waste (GW) and tobacco waste (TW) in the mass ratio GW: TW = 55: 45 (dry mass basis) was carried out under forced aeration (0.645 L min^?1 kg^?1) in a column reactor (10 L) under adiabatic conditions over 21 days. Adsorption of the gases evolved was carried out in the fixed-bed column reactor (0.166 L). The most important physical-chemical characteristics of the composting mass and adsorbents and the evolved CO₂ and NH₃ were closely monitored. The highest CO₂ and NH₃ concentrations were measured at the thermophilic stage and the cooling stage of composting, respectively. The results showed that zeolite and potting soil were good adsorbents for the sorption of CO₂ and NH₃. The zeolite adsorbed 31 % of the evolved CO₂ and the entire concentration of ammonia, whilst the potting soil adsorbed 3 % of CO₂ and 49 % of NH₃ from the exhaust gases.     

Zeolite ZSM-5 containing copper ions: The effect of the copper salt anion and NH<Subscript>4</Subscript>OH/Cu<Superscript>2+</Superscript> ratio on the state of the copper ions and on the reactivity of the zeolite in DeNO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Isotherms of copper cation sorption by H-ZSM-5 zeolite from aqueous and aqueous ammonia solutions of copper acetate, chloride, nitrate, and sulfate are considered in terms of Langmuir’s monomolecular adsorption model. Using UV-Vis diffuse reflectance spectroscopy, IR spectroscopy, and temperatureprogrammed reduction with hydrogen and carbon monoxide, it has been demonstrated that the electronic state of the copper ions is determined by the ion exchange and heat treatment conditions. The state of the copper ions has an effect on the redox properties and reactivity of the Cu-ZSM-5 catalysts in the selective catalytic reduction (SCR) of NO with propane and in N₂O decomposition. The amount of Cu²⁺ that is sorbed by zeolite H-ZSM-5 from aqueous solution and is stabilized as isolated Cu²⁺ cations in cationexchange sites of the zeolite depends largely on the copper salt anion. The quantity of Cu(II) cations sorbed from aqueous solutions of copper salts of strong acids is smaller than the quantity of the same cations sorbed from the copper acetate solution. When copper chloride or sulfate is used, the zeolite is modified by the chloride or sulfate anion. Because of the presence of these anions, the redox properties and nitrogen oxides removal (DeNO _x ) efficiency of the Cu-ZSM-5 catalysts prepared using the copper salts of strong acids are worse than the same characteristics of the sample prepared using the copper acetate solution. The addition of ammonia to the aqueous solutions of copper salts diminishes the copper salt anion effect on the amount of Cu(II) sorbed from these solutions and hampers the nonspecific sorption of anions on the zeolite surface. As a consequence, the redox and DeNO _x properties of Cu-ZSM-5 depend considerably on the NH₄OH/Cu²⁺ ratio in the solution used in ion exchange. The aqueous ammonia solutions of the copper salts with NH₄OH/Cu²⁺ = 6–10 stabilize, in the Cu-ZSM-5 structure, Cu²⁺ ions bonded with extraframework oxygen, which are more active in DeNO _x than isolated Cu²⁺ ions (which form at NH4OH/Cu2+ = 30) or nanosized CuO particles (which form at NH₄OH/Cu²⁺ = 3).     

低硅铝比ZSM-5分子筛的合成及其正庚烷裂化反应性能

以氨水为矿化剂,通过添加NH₄⁺离子水热合成了具有较低骨架硅铝比的ZSM-5分子筛。通过X射线衍射(XRD)、扫描电镜(SEM)、固体核磁共振(MAS-NMR)等表征手段,研究了硅源、铝源、矿化剂、阳离子等对ZSM-5分子筛的结晶度、形貌尺寸和骨架硅铝比等的影响,研究了ZSM-5分子筛的骨架硅铝比对正庚烷催化裂化反应的影响。研究表明,投料硅铝比越低,铝原子越难进入到分子筛骨架中;当氨水为矿化剂、正硅酸四乙酯为硅源时可以合成骨架硅铝比较低的氢型ZSM-5分子筛,添加NH₄⁺离子可以增强骨架铝的嵌入,进一步降低分子筛的骨架硅铝比(24.2)。正庚烷裂化反应结果表明,降低分子筛的骨架硅铝比可以提高正庚烷裂化反应的活性,但会降低低碳烯烃的选择性。     

Spherical Al-MCM-41 Doped with Copper by Modified TIE Method as Effective Catalyst for Low-Temperature NH3-SCR

Aluminum containing silica spherical MCM-41 was synthesized and modified with copper by the template ion-exchange method (TIE) and its modified version, including treatment of the samples with ammonia solution directly after template ion-exchange (TIE-NH₃). The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (low temperature N₂ sorption), morphology (SEM-EDS), form and aggregation of deposited copper species (UV-vis DRS), reducibility of copper species (H₂-TPR), and surface acidity (NH₃-TPD). The deposition of copper by the TIE-NH₃ method resulted in much better dispersion of this metal on the MCM-41 surface comparing to copper introduced by TIE method. It was shown that such highly dispersed copper species, mainly monomeric Cu²⁺ cations, deposited on aluminum containing silica spheres of MCM-41, are significantly more catalytically effective in the NH₃-SCR process than analogous catalysts containing aggregated copper oxide species. The catalysts obtained by the TIE-NH₃ method effectively operated in much broader temperature and were less active in the side process of direct ammonia oxidation by oxygen.     

A simple and rapid visual method for the determination of ammonia nitrogen in environmental waters using thymol

Simple visual and spectrophotometric methods for the determination of ammonia nitrogen in water are proposed, based on the color development of indothymol blue formed between ammonia and thymol. The color development was accelerated by nitroprusside to complete in 3 min. This color development is remarkably rapid compared with that of the other conventional methods with indothymol blue and indophenol blue. The concentration range of ammonia nitrogen spectrophotometrically determined was 0.04–1.2 mg/L NH₄-N. The absorbance per 1 μg NH₄-N was 0.0215 (molar absorptivity = 1.51 × 10⁴) at 690 nm. The visual method not using any instrument as an in situ method in field works was developed based on the optimum conditions for the established spectrophotometric method. This visual method was successfully applied to the determination of ammonia nitrogen in environmental waters.     

Elektromotorisches Verhalten von Glaselektroden in flüssigem Ammoniak

Glass electrodes behaving as protodes or alkali cation electrodes in aqueous systems respond to the protonated solvent in liquid ammonia at — 38°C and can be used to measure the activity of NH₄⁺. Deviations in the response to the activity of NH₄⁺ are shown to be due to an alkali metal function (alkaline error) of the glass electrodes. The selectivity of glass electrodes for different alkali metal cations changes drastically from water to liquid ammonia.     

Review of separation methods for the determination of ammonium/ammonia in natural water

Ammonium (NH₄⁺) and ammonia (NH₃) in aquatic ecosystems are of great interest to environmental scientists because they can be used to study the nitrogen cycle and as water quality indicators. Analytical separation methods developed in recent decades have been used widely to determine NH₄⁺ and NH₃ in aqueous solutions. This review presents an overview of state-of-the-art separation methods and analytical techniques for determining NH₃/NH₄⁺ in natural water, including chromatographic methods, electrophoretic methods, extraction methods, membrane-based gas diffusion methods, membraneless gas diffusion methods, passive sampling methods, and paper-based analytical methods. Common detection techniques that can be used in conjunction with particular separation methods are described, phase-transfer strategies (liquid-liquid, liquid-solid, liquid-membrane-liquid, and liquid-gas-liquid methods) are highlighted, and the strengths and weaknesses of the separation methods are discussed. The outlook, challenges, and expected future developments in the field of separation methods for determining NH₄⁺ and NH₃ in natural water are presented.     

Mixed Beds for Selective Removal of Ammonium Carbonate in Dialysate

We have studied experimentally and theoretically the exchange of NH₄ ⁺, Na⁺, K⁺, Ca⁺⁺, Mg⁺⁺, and H⁺ ions in zeolite beds, weakly-acidic resin beds, and mixed beds of the zeolite and the resin. The zeolite is highly selective for NH₄ ⁺ and K⁺, whereas the resin with carboxyl functional groups is highly selective for Ca⁺⁺ and Mg⁺⁺. The effluent histories of single exchanger beds can be well predicted by the Multicomponent Chromatography Theory developed by Helfferich and Klein (1970). These histories are mainly the result of ion competition for ion exchanger sites; they can not be adjusted to meet the goal that NH₄ ⁺ ions are removed and simultaneously the pH and concentrations of all the major physiological cations are maintained at normal values. The effluent histories of mixed beds, on the other hand, can be adjusted. We have designed a mixed bed which can meet the goal except that for each equivalent of NH₄ ⁺ removed, 0.3 equivalents of Na⁺ are returned. The effluent histories of K⁺ and NH₄ ⁺ for the mixed beds are similar to those of the zeolite beds, whereas the Ca⁺⁺ and Mg⁺⁺ histories are similar to those of the resin beds.     

Ligand Exchange Processes on Solvated Beryllium Cations. II [Be(solvent)(12‐Crown‐4)]2+

The solvation and solvent exchange mechanism of [Be(12‐crown‐4)]²⁺ in water and ammonia was studied by DFT calculations (RB3LYP/6‐311+G**). In solution, five‐fold coordinated Be²⁺ species of quadratic pyramidal [Be(H₂O)(12‐crown‐4)]²⁺ and [Be(NH₃)(12‐crown‐4)]²⁺ exist. The water and ammonia exchange reactions follow an associative interchange mechanism, similar to that found for the pure solvent complexes [Be(H₂O)₄]²⁺ and [Be(NH₃)₄]²⁺. The activation barriers are clearly smaller than for the pure solvent complexes, viz. [Be(H₂O)(12‐crown‐4)]²⁺: 6.0 kcal/mol and [Be(NH₃)(12‐crown‐4)]²⁺: 15.3 kcal/mol.     

Effect of zeolite structure on the selective catalytic reduction of NO with ammonia over Mn-Fe supported on ZSM-5, BEA,MOR and FER

A series of catalysts based on Mn-Fe loaded zeolites was prepared by impregnation and their activity in the selective catalytic reduction of NO with ammonia (NH₃-SCR) was investigated. The highest catalytic conversion was recorded for MnFe-ZSM-5 (MnFe-Z), followed by MnFe-BEA (MnFe-B) and MnFe-MOR (MnFe-M), while MnFe-FER (MnFe-F) showed a very poor activity over the entire temperature range. In order to evidence a correlation between the structure and acidity of the zeolites and NO conversion, the prepared samples were characterized by various techniques (ICP-AES, N₂ physisorption at 77 K, XRD, ²⁷NMR, Raman, FTIR spectroscopy of adsorbed ammonia, H₂-TPR, DRS UV–Vis, EPR and XPS). The superior catalytic activity of MnFe-Z at low temperature is attributed to the abundance of Mn⁴⁺ concentration as revealed by XPS, the highest NH₃-L/NH₄⁺ ratio indicative of the contribution of metals in generating Lewis acidic centers as evidenced by IR-NH3, and the better reducibility of manganese and iron on ZSM-5 which increases the kinetics for red-ox cycles as confirmed in TPR analysis. Fe₃Mn₃O₈ mixed oxide phase is also detected by XRD and XPS and can be associated with the high reducibility of MnFe-Z which generates a high oxidation ability favoring NO to NO₂ oxidation. Raman spectroscopy was also used to confirm the existence of a strong synergy between metals and ZSM-5 support revealed by the shift in the signal position and the decrease in band intensities. The results showed that the zeolite framework and acidity generate catalysts with different textural and structural properties which influence the metal dispersion and speciation and hence influence the catalytic performances.

     

UF6 and UF4 in Liquid Ammonia: [UF7(NH3)]3− and [UF4(NH3)4]

From the reaction of uranium hexafluoride UF₆ with dry liquid ammonia, the [UF₇(NH₃)]^3? anion and the [UF₄(NH₃)₄] molecule were isolated and identified for the first time. They are found in signal‐green crystals of trisammonium monoammine heptafluorouranate(IV) ammonia (1:1; [NH₄]₃[UF₇(NH₃)] ? NH₃) and emerald‐green crystals of tetraammine tetrafluorouranium(IV) ammonia (1:1; [UF₄(NH₃)₄] ? NH₃). [NH₄]₃[UF₇(NH₃)] ? NH₃ features discrete [UF₇(NH₃)]^3? anions with a coordination geometry similar to a bicapped trigonal prism, hitherto unknown for U^IV compounds. The emerald‐green [UF₄(NH₃)₄] ? NH₃ contains discrete tetraammine tetrafluorouranium(IV) [UF₄(NH₃)₄] molecules. [UF₄(NH₃)₄] ? NH₃ is not stable at room temperature and forms pastel‐green [UF₄(NH₃)₄] as a powder that is surprisingly stable up to 147 °C. The compounds are the first structurally characterized ammonia complexes of uranium fluorides.     

Heterogeneous Heck Reaction in Microemulsion with Palladium Supported Na‐Y Zeolites as Catalyst

Heterogeneous Heck reaction catalyzed by Pd (NH₃)₄ ²⁺‐Na‐Y zeolite in the presence of K₂CO₃ as the base has been carried out in an oil‐in‐water microemulsion based on Triton X10 at 80°C.     

A simple and rapid visual method for the determination of ammonia nitrogen in environmental waters using thymol

Simple visual and spectrophotometric methods for the determination of ammonia nitrogen in water are proposed, based on the color development of indothymol blue formed between ammonia and thymol. The color development was accelerated by nitroprusside to complete in 3 min. This color development is remarkably rapid compared with that of the other conventional methods with indothymol blue and indophenol blue. The concentration range of ammonia nitrogen spectrophotometrically determined was 0.04–1.2 mg/L NH₄-N. The absorbance per 1 μg NH₄-N was 0.0215 (molar absorptivity = 1.51 × 10⁴) at 690 nm. The visual method not using any instrument as an in situ method in field works was developed based on the optimum conditions for the established spectrophotometric method. This visual method was successfully applied to the determination of ammonia nitrogen in environmental waters. Received: 21 December 1998 / Revised: 31 May 1999 / /Accepted: 4 June 1999     

Analysis of Acidic Properties of Zeolitic and Non-Zeolitic Solid Acid Catalysts Using Temperature-Programmed Desorption of Ammonia

A method of ammonia temperature-programmed desorption (TPD) for analysis of acidic property of a solid was improved by introduction of a water vapor treatment method and development of a theory for calculation of ammonia adsorption heat from the TPD profile. The improved method was applied to various solid acid catalysts to establish relationships between the acidic properties and catalytic performances for various acid-catalyzed reactions. Here, examples of the applications to some important acid catalysts are reviewed. The exact analysis of acidic property of Y zeolite and its change by such modifications as steaming and ethylenediaminetetraacetic acid (EDTA) treatment gave a new interpretation on the generation of alkane (paraffin) cracking activity on an ultra stable Y (USY) zeolite. The surface density and strength of acid sites on WO₃/ZrO₂ and SO₄ ^2–/ZrO₂ catalysts were determined, and their relations with catalytic activities for Friedel–Crafts type alkylation and skeletal isomerization of alkane were found.     

Determination of237Np in environmental samples using inductively coupled plasma mass spectrometry

Ammonium uranates (AU) obtained by the addition of aqueous NH₄ OH to a solution of UO₂ (NO₃)₂ or the equilibrium reaction of UO₃ · 2H₂ O with the vapour over concentrated NH₄ OH have been studied by X-ray diffraction (XRD) analysis, diffuse reflectance Fourier transform infrared spectrometry (DR-FTIR) and chemical analysis. Ammonia can be present as either NH₃ or NH ₄ ⁺ . For precipitates obtained at a pH of 3.7, ammonia in the form of NH₃ is predominant. For ammonium uranate obtained by reaction over concentrated NH₄OH, most of the ammonia is bonded as NH ₄ ⁺ . The reaction mechanism and structures of the products are also discussed.