N-羧基吡啶功能化离子液体的表征

合成了系列新型N-羧基吡啶功能化离子液体, 利用1H NMR、13C NMR、IR、DSC对其进行表征并研究了其与常规溶剂的相溶性, 采用酸碱滴定法测量了系列离子液体的酸离解常数pKa值. N-羧基取代吡啶功能化离子液体的pKa值在2.5~4.0之间, 并随阳离子取代羧基碳链的增长而增大; 离子之间形成氢键及阴、阳离子的大小是影响离子液体熔点的主要因素. 阴离子越小, 熔点越高. 所合成的N-羧基吡啶功能化离子液体具有相同的相溶性且由取代羧基所决定, 与常见烷基咪唑离子液体相比, N-羧基吡啶功能化离子液体与丙酮、二氯甲烷并不相溶. 功能化离子液体的阳离子取代基是影响其物化性能的主要因素, 通过改变功能化基团碳链的长短及与不同阴离子进行组合, 可以对功能化离子液体物理、化学性能进行调节.     

离子液体催化CO_2和环氧化合物的研究进展

离子液体是一类新型的催化CO_2环加成反应的催化剂,因其具有结构可设计性、催化活性高、绿色高效等优点而被广泛应用于催化合成环状碳酸酯.本文主要综述了近几年来各种常规型离子液体及功能化离子液体对CO_2和环氧化合物反应的催化性能的研究进展,其中常规型离子液体主要有咪唑类、季铵盐、季鏻盐、吡啶类等离子液体,而功能化离子液体包括氨基功能化、羟基功能化、羧基功能化、氨基酸类等离子液体.同时对各类离子液体催化CO_2与环氧化合物合成环状碳酸酯的研究中存在的问题进行了分析,并对其应用前景进行了展望.     

Pd/羧基功能化离子液体选择性催化氧化苯乙烯

 利用羧基对咪唑型离子液体的阳离子进行功能化,得到一系列具有不同羧基数目及与不同阴离子搭配的N-羧基功能化咪唑离子液体(TSILs), 进而构筑PdCl2/TSILs催化剂体系. 以过氧化氢为氧化剂,将PdCl2/TSILs用于选择性催化氧化苯乙烯合成苯乙酮. 研究结果表明, PdCl2/TSILs催化体系对目标反应具有理想的催化性能,羧基功能化离子液体的阳离子及其搭配的阴离子对苯乙酮的选择性和产率均有显著的影响. 阳离子的羧基数目越多,阳离子的不对称性越高, PdCl2/TSILs催化剂体系的活性越好. 含有相同阳离子的PdCl2/TSILs催化剂体系,其催化性能按照阴离子PF-6＜H2PO-4＜Cl-＜BF-4的顺序递增且与其酸强度顺序相反. 含有三羧基的功能化离子液体与PdCl2构筑的催化剂体系具有最佳的催化性能,在55 ℃下,该催化剂体系的转换频率值达到125 h-1, 苯乙烯可以完全转化且苯乙酮的选择性为91%.     

功能化离子液体修饰的SBA-15固定化Burkholderia cepacia脂肪酶

采用含不同碳链长度咪唑环的烷基功能化离子液体修饰介孔材料SBA-15,并通过X-射线衍射、元素分析、N2吸附-脱附、红外光谱和扫描电镜等方法研究了离子液体修饰对SBA-15结构的影响.以三乙酸甘油酯的水解为探针反应,考察了甲基、丁基、辛基等不同链长烷基取代咪唑类离子液体修饰的SBA-15固定化Burkholderia cepacia脂肪酶(BCL)的酶活、最适反应条件及稳定性等酶学性质.结果表明,离子液体修饰后材料保持了原有的介孔结构,其固定化酶对温度及低pH的敏感度降低,比活力及稳定性均显著提高.其中甲基功能化离子液体修饰的SBA-15固定化酶的比活力最高,是原粉SBA-15固定化酶的2.4倍;辛基功能化离子液体修饰的SBA-15固定化酶的热稳定性、储存稳定性、重复使用性及有机溶剂耐受性最佳.     

离子液体包裹纳米金修饰金电极用于鲁米诺电致化学发光的研究

室温离子液体是由有机阳离子和无机阴离子或有机阴离子组成的室温熔融盐,由于其优异的化学催化、生物催化和化学反应性能而在化学和工业方面受到广泛的关注和运用.离子液体也应用于合成纳米金属材料特别是纳米金~([1～3]),纳米金作为一种化学和生物催化性能良好的纳米金属材料也应用于鲁米诺的液相电致化学发光研究~([4]).本研究将巯基功能化离子液体应用于纳米金的合成,并将不同粒径的离子液体包裹的纳米金修饰金电极然后用于鲁米诺电极化学发光的研究.     

谷胱甘肽修饰金纳米棒的制备及与Cu~(2+)的作用

制备了谷胱甘肽(GSH)功能化的金纳米棒复合材料,根据金纳米棒的等离子体吸收峰对其组装排列敏感的特性,研究了功能化的金纳米棒在不同p H值下的组装行为及与Cu2+离子作用后引起的聚集程度、排列方式和光学吸收等变化.同时,测试了纯金纳米棒和谷胱甘肽修饰的金纳米棒分别与铜离子作用后所得复合材料的光热转换性能.结果表明,相对于纯金纳米棒材料强的光热转换效应,铜离子能明显降低复合材料的光热转换效应,与其它金属离子比较,GSH修饰的金纳米棒的等离子光学特性对铜离子具有选择性的变化.     

多壁碳纳米管-钛酸盐纳米管复合纳米材料的制备及其生物电化学性能

以TiO2纳米颗粒为前体,采用碱性水热法制备出钛酸盐纳米管(TNTs)与多壁碳纳米管(MWCNTs)的复合纳米材料(MWCNT-TNT);借助透射电子显微镜、傅立叶变换红外光谱仪和X射线衍射仪分析了纳米材料的结构、组成和形貌.将辣根过氧化酶,室温离子液体,Nafion和复合纳米材料共同修饰在电极表面组成酶电极,利用循环伏安法研究了该酶电极的电化学性能.结果表明,TiO2纳米颗粒完全转化为钛酸盐纳米管并且很好的与MWCNTs结合在一起;复合材料修饰酶电极的循环伏安行为明显优于TNTs修饰酶电极,表明引入MWCNTs可改善钛酸盐纳米材料的导电性以及电化学性能.     

N3敏化Ho3+离子修饰TiO2纳米晶电极的光电化学性质

研究了Ho3+离子表面修饰对TiO2纳米晶电极光电性能的影响. TiO2表面氧化钬的存在一方面降低了染料和TiO2之间的电子注入速率, 而另一方面它也能够抑制电荷复合. 结果表明, 在TiO2纳米晶薄膜表面修饰一定厚度的Ho3+离子层, 在电极表面就形成了一个势垒, 能够有效抑制电极表面的电荷复合, 从而提高了染料敏化太阳能电池的光电压和光电转化效率. 在93.1 mW·cm-2白光照射下, TiO2/Ho-0.1 和TiO2/Ho-0.2(0.1 和0.2分别是修饰TiO2电极的Ho3+溶液的浓度, 单位是mol·L-1)两个电极的光电转化效率分别达到8.3%和7.6%, 与TiO2电极(7.2%)比较, 分别增大了15%和5%.     

功能化离子液体催化碳-杂键形成反应

离子液体独特的溶剂性能使它在合成和催化领域得到了广泛的应用。然而,离子液体的经济问题和可能的环境友好性问题使得人们逐渐把目光投向了离子液体自身的催化性能。人们通过对离子液体结构的修饰设计出了各种具有特定催化性能的功能化离子液体。近年来功能化离子液体在催化碳-杂键形成反应方面有了相当多的应用。本文以形成的碳-杂原子键类型为主线,综述了功能化离子液体在催化碳-杂键形成反应方面的最新研究进展,涉及到了酸性离子液体、碱性离子液体、金属有机功能化离子液体、酸碱双功能离子液体、手性离子液体等多种类型的功能化离子液体。     

离子液体-Ni微/纳米粒子协同电催化检测维生素B2

本文制备了离子液体-Ni微/纳米粒子修饰碳糊电极.研究了离子液体对Ni微/纳米粒子氧化还原的促进作用,用循环伏安法在0.1 mol/L B-R缓冲溶液(pH=4.5)中研究了维生素B2(VB2)在该修饰电极上的电化学行为,优化了各种实验条件.实验结果表明,本文制备的修饰电极能很好地催化氧化VB2,VB2在该修饰电极上的...     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

Sol-gel low-temperature synthesis of stable anatase-type TiO2 nanoparticles under different conditions and its photocatalytic activity

In this work, TiO(2) nanoparticles in anatase phase was prepared by sol-gel low temperature method from titanium tetra-isopropoxide (TTIP) as titanium precursor in the presence of acetic acid (AcOH). The effects of synthesis parameters such as AcOH and water ratios, sol formation time, synthesis and calcination temperature on the photocatalytic activity of TiO(2) nanoparticles were evaluated. The resulting nanoparticles were characterized by X-ray diffraction, UV-Vis reflectance spectroscopy, transmission electron microscopy and Brunauer-Emmett-Teller techniques. Photocatalytic activity of anatase TiO(2) nanoparticles determined in the removal of C. I. Acid Red 27 (AR27) under UV light irradiation. Results indicate that with increasing AcOH/TTIP molar ratio from 1 to 10, sol formation time from 1 to 3 h and synthesis temperature from 0 to 25°C, increases crystallite size of synthesized nanoparticles. It was found that optimal conditions for low temperature preparation of anatase-type TiO(2) nanoparticles with high photocatalytic activity were as follows: TTIP:AcOH:water molar ratio 1:1:200, sol formation time 1 h, synthesis temperature 0°C and calcination temperature 450°C.     

Synthesis, isolation, and redispersion of resorcinarene-capped anatase TiO2 nanoparticles in nonaqueous solvents

C-undodecylcalix[4]-resorcinarene (C(11)-resorcinarene)-capped anatase TiO(2) nanoparticles have been synthesized and could be isolated and redispersed in different nonaqueous solvents. The adsorption of C(11)-resorcinarene onto the surface of TiO(2) nanoparticles led the shifting of the onset wavelength of the optical absorption in the visible range along with a broad band centered at 422 nm corresponding to ligand-to-metal charge transfer transition within the surface titanium(IV)-C(11)-resorcinarene complex. The interaction of TiO(2) nanoparticle with C(11)-resorcinarenes was investigated by photoluminescence (PL). Proton nuclear magnetic resonance ((1)H NMR) spectroscopy study revealed that the C(11)-resorcenarene molecules adsorbed chemically onto the surfaces of TiO(2) nanoparticles. The average particle diameter of bare anatase TiO(2) and C(11)-resorcinarene-capped TiO(2) was determined using transmission electron microscopy (TEM) and was found to be equal to ca. 5 nm.     

Crystallization and photovoltaic properties of titania-coated polystyrene hybrid microspheres and their photocatalytic activity

The hybrid microspheres with polystyrene core coated by titania nanoparticles were prepared by miniemulsion polymerization, and the as-prepared samples were characterized by SEM, XRD, TG-DTA, XPS, and SPS techniques. TiO2 nanoparticles experienced two processes of phase transition, i.e., amorphous to anatase and anatase to rutile at the calcining temperature range from 400 to 1000 degrees C. The phase transformation temperature of TiO2 hybrid microspheres from anatase to rutile was increased by about 300 degrees C due to the blocking function of calcined polymer remainder. SPS results present that the band-gap of hybrid microspheres is 3.2-3.4 eV, which is larger than that of pure TiO2. The maximum intensity of the SPS signal is about 3 times larger for the hybrid material as compared to the pure TiO2. In addition, the photocatalytic degradation rate of TiO2 hybrid microspheres was 15% faster than that of pure TiO2 in the experiment of the photocatalytic degradation of methyl orange.     

Synthesis of titanium dioxide nanoparticles with mesoporous anatase wall and high photocatalytic activity

Mesoporous titanium dioxide nanosized powder with high specific surface area and anatase wall was synthesized via hydrothermal process by using cetyltrimethylammonium bromide (CTAB) as surfactant-directing agent and pore-forming agent. The resulting materials were characterized by XRD, nitrogen adsorption, FESEM, TEM, and FT-IR spectroscopy. The as-synthesized mesoporous TiO2 nanoparticles have mean diameter of 17.6 nm with mean pore size of 2.1 nm. The specific surface area of the as-synthesized mesoporous nanosized TiO2 exceeded 430 m2/g and that of the samples after calcination at 600 degrees C still have 221.9 m2/g. The mesoporous TiO2 nanoparticles show significant activities on the oxidation of Rhodamine B (RB). The large surface area, small crystalline size, and well-crystallized anatase mesostructure can explain the high photocatalytic activity of mesoporous TiO2 nanoparticles calcined at 400 degrees C.     

Synthesis of uniform anatase TiO2 nanoparticles by the gel-sol method 2. Adsorption of OH- Ions to Ti(OH)4 gel and TiO2 particles

The pH value in the gel-sol system for the preparation of uniform anatase TiO2 nanoparticles, as a decisive factor for controlling the size and shape of the final product, was found to be significantly changed during the formation process of the anatase TiO2 particles from a condensed Ti(OH)4 gel. The dramatic evolution of pH with the progress of the synthetic process has clearly been explained in terms of the adsorption and desorption of a hydroxide ion (OH-) ora proton (H+) on the solids transforming with time. The adsorption and desorption of OH- or H+ were enhanced by the presence of an inert electrolyte such as NaClO4, as explained by its shielding effect on the electrical interactions between the electrically charged precipitates and free OH- and H+ ions. The electrolyte also hampered the phase transformation of Ti(OH)4 precipitate to anatase TiO2. This effect of electrolytes was explained in terms of the inhibited nucleation of anatase TiO2 by enhanced adsorption of OH- ions toTiO2 embryos. The points of zero charge (PZC) of the amorphous Ti(OH)4 precipitate and the anatase TiO2 particles at 25 degrees C were obtained from the change in pH associated with the adsorption and desorption of OH- or H+, i.e., 4.6 for Ti(OH)4 precipitate and 6.0 for anatase TiO2 in the presence of 0.1 mol dm(-3) NaClO4. The PZCof the Ti(OH)4 precipitate measured at 25 degrees C after additional aging at 100 degrees C for 30 min was shifted to 4.1, owing to the promoted adsorption of OH-.     

二氧化钛纳米微粒的制备与光催化活性

本文采用溶液－凝胶法制备了粒径为１０－２０ｎｍ左右的二氧化钛纳米微粒。用ＸＲＤ研究了二氧化钛溶胶的热处理过程,研究表明温度在４７３Ｋ－６７３Ｋ左右ＴｉＯ２向量 粒呈不规整锐钛矿结构,粒径约为１０－２０ｎｍ。在８７３Ｋ左右ＴｉＯ２微粒出现锐钛矿与金红石型混晶结构。     

The different behavior of rutile and anatase nanoparticles in forming oxy radicals upon illumination with visible light: an EPR study

Photoexcited TiO(2) has been found to generate reactive oxygen species, yet the precise mechanism and chemical nature of the generated oxy species especially regarding the different crystal phases remain to be elucidated. Visible light-induced reactions of a suspension of titanium dioxide (TiO(2)) in water were investigated using electron paramagnetic resonance (EPR) coupled with the spin-trapping technique. Increased levels of both hydroxyl (˙OH) and superoxide anion (˙O(2)(-)) radicals were detected in TiO(2) rutile and anatase nanoparticles (50 nm). The intensity of signals assigned to the ˙OH and ˙O(2)(-) radicals was larger for the anatase phase than that originating from rutile. Moreover, illumination with visible (nonUV) light enhanced ˙O(2)(-) formation in the rutile phase. Singlet oxygen was not detected in water suspension of TiO(2) neither in rutile nor in anatase nanoparticles, but irradiation of the rutile phase with visible light revealed a signal, which could be attributed to singlet oxygen formation. The blue part of visible spectrum (400-500 nm) was found to be responsible for the light-induced ROS in TiO(2) nanoparticles. The characterization of the mechanism of visible light-induced oxy radicals formation by TiO(2) nanoparticles could contribute to its use as a sterilization agent.     

Synthesis and characterization of catalytic iridium nanoparticles in imidazolium ionic liquids

The reduction of [Ir(cod)Cl](2) (cod=1,5-cyclooctadiene) dissolved in 1-n-butyl-3-methyl tetrafluoroborate, hexafluorophosphate and trifluoromethane sulphonate ionic liquids in the presence of 1-decene by molecular hydrogen produces Ir(0) nanoparticles. The formation of these nanoparticles follows the two-step [A-->B, A+B-->2B (k(1),k(2))] autocatalytic mechanism. The same mean diameter values of around 2-3 nm were estimated from in situ TEM and SAXS analyses of the Ir(0) nanoparticles dispersed in the ionic liquids and by XRD of the isolated material. XPS and EXAFS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the iridium nanoparticles. SAXS analysis indicated the formation of an ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8-4.0 nm depending on the type of the anion.     

Versatile biomimetic dendrimer templates used in the formation of TiO2 and GeO2

Biomimetic synthesis is emerging as an advantageous alternative to the harsh synthetic conditions traditionally used in metal oxide syntheses techniques. Silaffins, proteins from the C. fusiformis diatom, form silica in an aqueous environment under benign conditions. Amine terminated PAMAM and PPI dendrimers are effective mimics of silaffins and other silica precipitating polyamines. We have expanded the scope of dendrimer mediated metal oxide formation to include titanium dioxide, a photocatalyst, and germanium dioxide, a blue photoluminescent material. The nanoparticles were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (IR), and X-ray diffraction patterns (XRD). A variable temperature XRD analysis of TiO(2) nanoparticles was conducted to study the transition from anatase to rutile. TiO(2) nanoparticles synthesized in phosphate buffer showed a 200 degrees C decrease in the anatase to rutile transition temperature relative to TiO(2) templated in water. XRD analysis of GeO(2) nanoparticles in either water or phosphate buffer reveal crystalline alpha-phase germanium oxide. To our knowledge, this is the first report of the synthesis of crystalline GeO(2) under ambient conditions.