Stacking of Self‐Assembled Surface Micelles in Ultrathin Films

Nonpolar fluorophilic/lipophilic tetrablock amphiphiles are investigated on the surface of water and on solid substrates using compression isotherms, Brewster angle microscopy, and atomic force microscopy. At low pressures, the tetrablocks form monolayers of closely packed surface hemimicelles. Further compression causes a 2D/3D transition. At the end of the plateau, half of the deposited material is expelled forming a second monolayer on top of the initially formed monolayer. Both layers of the films consist of surface micelles, thus providing the first example of spontaneous or compression‐driven stacking of self‐assembled nano‐objects.     

A Theoretical Study of 1‐D and 2‐D Helium Lattices

One‐ and two‐dimensional (1‐D and 2‐D) helium lattices have been studied using ab initio RHF/6–31G** computations. Structural, physical and thermochemical properties have been calculated and analyzed for the 1‐D and 2‐D He_N lattices respectively up to N = 50 and N = 36. Asymptotic properties of the 1‐D He_N lattices are obtained by extrapolating N‐dependence properties to large values of N. Analysis of the results show that the bulk per‐atom interaction (binding) energies increase while the optimized interatomic distances (bond lengths) slightly decrease with the increase in size of the 1‐D He_N lattices and both reach their asymptotic values of 0.352 cm^?1 and 3.18775 Å, respectively. Between the square and hexagonal (packed) structures of the 2‐D He_N lattices, the latter is more favored. Extrapolated values of the calculated properties, including lattice parameter, binding and zero point energies, heat capacity, and entropy have also been calculated for both 1‐D and 2‐D He_N lattices. The surface densities for monolayer films of helium atoms with square and hexagonal configurations have been calculated to be respectively 9.84 × 10¹⁸ and 1.04 × 10¹⁹ helium atoms/cm² which are comparable to the experimental value of 2.4 × 10¹⁹ helium atom/m² well within the typical large and directional error bars of the experiments. Surface effects have been investigated by comparing the packed He_N2‐D lattices with the same value of N but with different geometries (arrangements). This comparison showed that the He_N lattices prefer arrangements with the smallest surface area.     

Super‐Elastic Air/Water Interfacial Films Self‐Assembled from Soluble Surfactants

We show that water‐soluble monosodic salts of F‐alkyl phosphates C_nF_2n+1(CH₂)₂OP(O)(OH)₂, with n=8 and 10 (F8H2Phos and F10H2Phos) form Gibbs films with exceptionally high dilational viscoelastic modules E that reach ～900 mN m^?1 in the condensed phases. These E values are up to one order of magnitude larger than those recorded for phospholipid, protein and polymer films commonly considered as highly viscoelastic. F8H2Phos.1Na undergoes a transition between a liquid‐expanded and a liquid‐condensed phase. In the case of F10H2Phos.1Na, a transition occurs between a gas phase of surface domains, in which the molecules are densely packed, and a liquid‐condensed phase.     

Amperometric Hydrogen Peroxide Biosensor Based on the Immobilization of Horseradish Peroxidase (HRP) on the Layer‐by‐Layer Assembly Films of Gold Colloidal Nanoparticles and Toluidine Blue

The precursor film was first formed on the Au electrode surface based on the self‐assembly of L ‐cysteine and the adsorption of gold colloidal nanoparticles (nano‐Au). Layer‐by‐layer (LBL) assembly films of toluidine blue (TB) and nano‐Au were fabricated by alternately immersing the electrode with precursor film into the solution of toluidine blue and gold colloid. Cyclic voltammetry (CV) and quartz crystal microbalance (QCM) were adopted to monitor the regular growth of {TB/Au} bilayer films. The successful assembly of {TB/Au}_n films brings a new strategy for electrochemical devices to construct layer‐by‐layer assembly films of nanomaterials and low molecular weight materials. In this article, {TB/Au}_n films were used as model films to fabricate a mediated H₂O₂ biosensor based on horseradish peroxidase, which responded rapidly to H₂O₂ in the linear range from 1.5×10^?7 mol/L to 8.6×10^?3 mol/L with a detection limit of 7.0×10^?8 mol/L. Morphologies of the final assembly films were characterized with scanning probe microscopy (SPM).     

一种新颖的二维4f-3d-5d多金属-异烟酸配合物的合成、晶体结构和磁性研究

通过水热方法合成了一种新颖的异金属金属-异烟酸无机-有机杂化体[Zn0.5(H2O)]{(Hg2Cl5)[Er(C6NO2H4)3(H2O)2]}(HgCl2)·0.5CH3OH·0.5H2O (1)并对其进行了单晶X-射线衍射结构表征。该化合物是首例4f-3d-5d多金属-异烟酸配合物。化合物1属于单斜晶系C2/c空间群,每个单胞中有8个分子,晶体学参数为：a = 34.165(4) Å,b = 9.4692(8) Å,c = 24.575(3) Å,β = 115.090(5)°,V = 7200(1) Å3,C18.50H21Cl7ErHg3N3O10Zn0.50,Mr = 1495.25,Dc = 2.759 g/cm3,T = 293(2) K,μ(MoKα) = 15.954 mm-1,F(000) = 5400, R1/wR2 = 0.0561/0.0909,共有6468个独立衍射点,其中[I > 2σ(I)]的有3157个。该化合物具有新颖的二维{(Hg2Cl5)[Er(C6NO2H4)3(H2O)2]}层状结构,由Hg2Cl5–连接[Er(C6NO2H4)3(H2O)2]链形成。该二维层和氯化汞及结晶水之间通过氢键形成三维结构,甲醇分子和水合锌离子位于该三维结构的空隙中。对化合物1的磁性测试显示该化合物具有反铁磁作用。     

Pentafluorobenzoato‐dimolybdenum(II) Solvate and Co‐crystal Complexes with Benzene and Naphthalin

The quadruply bonded Mo₂⁴⁺ complex Mo₂(DAniF)₃(OOCC₆F₅) ( 1 ) [DAniF = N,N′‐bis(4‐methoxyphenyl)formamidinate] was synthesized. The solvate Mo₂(DAniF)₃(OOCC₆F₅) · (C₆H₆) ( 2 ) and co‐crystal Mo₂(DAniF)₃(OOCC₆F₅) · (C₁₀H₈) ( 3 ) complexes were obtained by self‐assembly of crystals of 1 with benzene and naphthalin, respectively. Compounds 1 , 2 , and 3 were structurally characterized by single‐crystal X‐ray diffraction. In monomer 1 , the Mo–Mo bond length of 2.0874(6) Å is typical for dimolybdenum quadruple bonds. The solvate complex 2 was stabilized by weak π–π stacking interactions between the benzene molecule and the pentafluorophenyl ring (as indicated by a center‐to‐center distance of 3.838(10) Å and a center‐to‐plane distance of 3.712(4) Å between phenyl and pentafluorophenyl ring) and intermolecular C–H ··· F–C interactions (the shortest F ··· H distance is 2.560(2) Å). In complex 3 , a one‐dimensional chain was formed by C–H ··· F–C interactions between the hydrogen atoms in naphthalin and the fluorine atoms in the monomer (H ··· F distances of 2.582(2) Å). Information on the structures in solution of the three crystals was obtained by ¹H NMR spectroscopy.     

Solvent‐regulated Assembly of 1D and 2D CdII Coordination Polymers with Tetrafluorophthalate: Syntheses,Structures and Properties

Two new coordination polymers [Cd(1,2‐BDC‐F₄)(H₂O)₂(py)]_n ( 1 ) and {[Cd(1,2‐BDC‐F₄)(H₂O)₂](DMF)}_n ( 2 ) were prepared from the vapor diffusion reactions of Cd^II acetate with tetrafluorophthalic acid (1,2‐H₂BDC‐F₄) under different solvent atmospheres, and structurally characterized by single‐crystal diffraction technique. Both complexes reveal polymeric coordination architectures. Complex 1 is a one‐dimensional (1D) double chain, which crystallizes in the space group, P2₁2₁2₁. In 1 , each Cd^II ion is hexacoordinate by five oxygen atoms from two terminal water and three 1,2‐BDC‐F₄ anions with a μ₃‐bridging mode, as well as one nitrogen donor from one pyridine molecule. Complex 2 is a two‐dimensional (2D) layered network, which crystallizes in the P\bar{1} space group. In 2 , each Cd^II ion is heptacoordinate by seven oxygen atoms from two terminal water and four 1,2‐BDC‐F₄ anions with a μ₄‐bridging mode. The results clearly suggest that the judicious choice of solvent systems does play a critical role in the construction of coordination frameworks with distinct dimensionality and connectivity. Their spectroscopic, thermal, and fluorescence properties have also been investigated.     

2‐Amino‐5‐chloro‐1,3‐benzoxazol‐3‐ium 2‐(3,4‐di­chloro­phenoxy)­acetate

The 1:1 organic salt of the title compound, C₇H₆ClN₂O⁺·C₈H₅Cl₂O₃^? or [(2‐ABOX)(3,4‐D)], comprises the two constituent mol­ecules associated by an R₂²(8) graph‐set interaction through the carboxyl­ate group of 3,4‐D across the protonated N/N sites of 2‐ABOX [N?O 2.546 (3) and 2.795 (3) Å]. Cation/anion pairs associate across an inversion centre forming discrete tetramers via an additional three‐centre hydrogen‐bonding association from the latter N amino proton to a phenoxy O atom [N?O 3.176 (3) Å] and a carboxyl­ate O atom [N?O 2.841 (3) Å]. This formation differs from the polymeric hydrogen‐bonded chains previously observed for adduct structures of 2‐ABOX with carboxyl­ic acids.     

Recruitment and Immobilization of a Fluorinated Biomarker Across an Interfacial Phospholipid Film using a Fluorocarbon Gas

Perfluorohexane gas when introduced in the air atmosphere above a film of phospholipid self‐supported on an aqueous solution of C₂F₅‐labeled compounds causes the recruitment and immobilization of the latter in the interfacial film. When the phospholipid forms a liquid‐condensed Gibbs monolayer, which is the case for dipalmitoylphosphatidylcholine (DPPC), the C₂F₅‐labeled molecule remains trapped in the monolayer after removal of F‐hexane. Investigations involve bubble profile analysis tensiometry (Gibbs films), Langmuir monolayers and microbubble experiments. The new phenomenon was utilized to incorporate a hypoxia biomarker, a C₂F₅‐labeled nitrosoimidazole (EF5), in microbubble shells. This finding opens perspectives in the delivery of fluorinated therapeutic molecules and biomarkers.     

Self‐Assembly,Spectroscopic and Electrochemical Studies of Nickel(II)‐4,8‐Diazaundecanediamide Complex

The self‐assembly of NiCl₂·6H₂O with a diaminodiamide ligand 4,8‐diazaundecanediamide (L‐2,3,2) gave a [Ni(C₉H₂₀N₄O₂)(Cl)(H₂O)] Cl·2H₂O ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction analysis. Structural data for 1 indicate that the Ni(II) is coordinated to two tertiary N atoms, two O atoms, one water and one chloride in a distorted octahedral geometry. Crystal data for 1: orthorhombic, space group P 21nb, a = 9.5796(3) Å, b = 12.3463(4) Å, c = 14.6305(5) Å, Z = 4. Through NH···Cl–Ni (H···Cl 2.42 Å, N···Cl 3.24 Å, NH···Cl 158°) and OH···Cl–Ni contacts (H···Cl 2.36 Å, O···Cl 3.08 Å, OH···Cl 143°), each cationic moiety [Ni(C₉H₂₀N₄O₂) (Cl)(H₂O)]⁺ in 1 is linked to neighboring ones, producing a charged hydrogen‐bonded 1D chainlike structure. Thermogrametric analysis of compound 1 is consistent with the crystallographic observations. The electronic absorption spectrum of Ni(L‐2,3,2)²⁺ in aqueous solution shows four absorption bands, which are assigned to the ³A_2g → ³T_2g, ³T_2g → ¹Eg, ³T_2g → ³T_1g, and ³A_2g → ³T_1g transitions of triplet‐ground state, distorted octahedral nickel(II) complex. The cyclic volammetric measurement shows that Ni²⁺ is more easily reduced than Ni(L‐2,3,2)²⁺ in aqueous solution.     

cis‐Bis­[1,3‐bis(2‐fluoro­phenyl)­triazenido‐κ2N1,N3]­bis­(pyridine‐κN)cadmium(II)

In the title compound, [Cd(C₁₂H₈F₂N₃)₂(C₅H₅N)₂], the Cd atom lies on a crystallographic twofold axis in space group Iba2. The coordination geometry about the Cd^II ion corresponds to a rhombically distorted octahedron, with two deprotonated 1,3‐bis(2‐fluoro­phenyl)­triazenide ions, viz. FC₆H₄NNNC₆H₄F⁻, acting as bidentate ligands (four‐electron donors). Two neutral pyridine (py) mol­ecules complete the coordination sphere in positions cis with respect to one another. The triazenide ligand is not planar (r.m.s. deviation = 0.204 Å), the dihedral angle between the phenyl rings of the terminal 2‐fluoro­phenyl substituents being 24.6 (1)°. The triazenide and pyridine Cd—N distances are 2.3757 (18)/2.3800 (19) and 2.3461 (19) Å, respectively. Intermolecular C—H⋯F interactions generate sheets of mol­ecules in the (010) plane.     

Synthesis and Crystal Structure of the Tris‐bidentate Carbonatobis‐(1,10‐phenanthroline‐N,N′)nickel(II), [Ni(C12H8N2)2(CO3)]

The tris‐bidentate complex [Ni(C₁₂H₈N₂)₂(CO₃)] was synthesized by the reaction of Na₂CO₃, 1,10‐phenanthroline (phen = C₁₂H₈N₂) and NiSO₄ · 6 H₂O in the presence of succinic acid in a CH₃OH–H₂O solution. The compound crystallizes as heptahydrate. The crystal structure (monoclinic, P2₁/c (no. 14), a = 9.897(1), b = 26.384(2), c = 10.582(1) Å, β = 105.87(1)°, Z = 4, R = 0.0505, wR² = 0.1029 for 3166 observed reflections (F ≥ 2σ(F ) out of 6100 unique reflections) consists of hydrogen bonded water molecules and [Ni(phen)₂(CO₃)] complex molecules. The Ni atoms are sixfold octahedrally coordinated by the four N atoms of two bidentate chelating phen ligands and by two O atoms of the bidentate chelating carbonate group with d(Ni–N) = 2.092–2.100 Å, d(Ni–O) = 2.051, 2.079 Å. The complex molecules are stacked into 2D corrugated layers parallel to (010) via two types of intermolecular π‐π stacking interactions. One occurs between two quinoline rings of neighboring phen ligands at the distance of 3.63 Å in [010] direction and the other results from 1D π‐π stacking interactions through partially covered phen rings at alternative distances of 3.26 Å and 3.33 Å in [001] direction. The water molecules are sandwiched between 2D layers.     

Detection of layer‐by‐layer self‐assembly multilayer films by low‐temperature plasma mass spectrometry

The detection of layer‐by‐layer self‐assembly multilayer films was carried out using low‐temperature plasma (LTP) mass spectrometry (MS) under ambient conditions. These multilayer films have been prepared on quartz plates through the alternate assembling of oppositely charged 4‐aminothiophenol (4‐ATP) capped Au particles and thioglycolic acid (TGA) capped Ag particles. An LTP probe was used for direct desorption and ionization of chemical components on the films. Without the complicated sample preparation, the structure information of 4‐ATP and TGA on films was studied by LTP‐MS. Characteristic ions of 4‐ATP (M) and TGA (F), including [M]^+?, [M‐NH₂]⁺, [M‐HCN‐H]⁺, and [F + H]⁺, [F‐H]⁺, [F‐OH]⁺, [F‐COOH]⁺ were recorded by LTP‐MS on the films. However, [M‐CS‐H]⁺ and [F‐SH]⁺ could not be observed on the film, which were detected in the neat sample. In addition, the semi‐quantitative analysis of chemical components on monolayer film was carried out, and the amounts of 4‐ATP and TGA on monolayer surface were 45 ng/mm² and 54 ng/mm², respectively. This resulted the ionization efficiencies of 72% for 4‐ATP and 54% for TGA. In order to evaluate the reliability of present LTP‐MS, the correlations between this approach and some traditional methods, such as UV–vis spectroscopy, atomic force microscope and X‐ray photoelectron spectroscopy were studied, which resulted the correlation coefficients of higher than 0.9776. The results indicated that this technique can be used for analyzing the films without any pretreatment, which possesses great potential in the studies of self‐assembly multilayer films. Copyright © 2013 John Wiley & Sons, Ltd.     

Struktur und magnetische Eigenschaften von Bis{3‐amino‐1,2,4‐triazolium(1+)}pentafluoromanganat(III): (3‐atriazH)2[MnF5]

Structure and Magnetic Properties of Bis{3‐amino‐1,2,4‐triazolium(1+)}pentafluoromanganate(III): (3‐atriazH)₂[MnF₅] The crystal structure of (3‐atriazH)₂[MnF₅], space group P1, Z = 4, a = 8.007(1) Å, b = 11.390(1) Å, c = 12.788(1) Å, α = 85.19(1)°, β = 71.81(1)°, γ = 73.87(1)°, R = 0.034, is built by octahedral trans‐chain anions [MnF₅]^2–_∞ separated by the mono‐protonated organic amine cations. The [MnF₆] octahedra are strongly elongated along the chain axis (<Mn–F_ax> 2.135 Å, <Mn–F_eq> 1.842 Å), mainly due to the Jahn‐Teller effect, the chains are kinked with an average bridge angle Mn–F–Mn = 139.3°. Below 66 K the compound shows 1D‐antiferromagnetism with an exchange energy of J/k = –10.8 K. 3D ordering is observed at T_N = 9.0 K. In spite of the large inter‐chain separation of 8.2 Å a remarkable inter‐chain interaction with |J′/J| = 1.3 · 10^–5 is observed, mediated probably by H‐bonds. That as well as the less favourable D/J ratio of 0.25 excludes the existence of a Haldene phase possible for Mn³⁺ (S = 2).     

Killing two birds with one stone: 2D+2D→3D parallel stacking and 3D self‐penetrating structures in one reaction and their crystal‐to‐crystal transformation

Reaction of the flexible phenolic carboxylate ligand 2‐(3,5‐dicarboxylbenzyloxy)benzoic acid (H₃L) with nickel salts in the presence of 1,2‐bis(pyridin‐4‐yl)ethylene (bpe) leads to the generation of a mixture of the two complexes under solvolthermal conditions, namely poly[[aqua[μ‐1,2‐bis(pyridin‐4‐yl)ethylene‐κ²N:N′]{μ‐5‐[(2‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylato‐κ³O¹,O^1′:O³}nickel(II)] dimethylformamide hemisolvate monohydrate], {[Ni(C₁₆H₁₀O₇)(C₁₂H₁₀N₂)(H₂O)]·0.5C₃H₇NO·H₂O}_n or {[Ni(HL)(bpe)(H₂O)]·0.5DMF·H₂O}_n, 1 , and poly[[diaquatris[μ‐1,2‐bis(pyridin‐4‐yl)ethylene‐κ²N:N′]bis{μ‐5‐[(2‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylato‐κ²O¹:O⁵}nickel(II)] dimethylformamide disolvate hexahydrate], {[Ni₂(C₁₆H₁₀O₇)₂(C₁₂H₁₀N₂)₃(H₂O)₂]·2C₃H₇NO·6H₂O}_n or {[Ni₂(HL)₂(bpe)₃(H₂O)₂]·2DMF·6H₂O}_n, 2 . In complex 1 , the Ni^II centres are connected by the carboxylate and bpe ligands to form two‐dimensional (2D) 4‐connected (4,4) layers, which are extended into a 2D+2D→3D (3D is three‐dimensional) supramolecular framework. In complex 2 , bpe ligands connect to Ni^II centres to form 2D layers with Ni₆(bpe)₆ metallmacrocycles. Interestingly, 2D+2D→3D inclined polycatenation was observed between these layers. The final 5‐connected 3D self‐penetrating structure was generated through further connection of Ni–carboxylate chains with these inclined motifs. Both complexes were fully characterized by single‐crystal analysis, powder X‐ray diffraction analysis, FT–IR spectra, elemental analyses, thermal analysis and UV–Vis spectra. Notably, an interesting metal/ligand‐induced crystal‐to‐crystal transformation was observed between the two complexes.     

Intermetallic Phases in the Ca‐Cu‐Sn System

Twelve ternary alloys in the Ca‐Cu‐Sn system were synthesized as a test on the existing phases. They were prepared from the elements sealed under argon in Ta crucibles, melted in an induction furnace and annealed at 700 °C or 600 °C. Four ordered compounds were found: CaCuSn (YbAuSn type), Imm2, a = 4.597(1) Å, b = 22.027(2) Å, c = 7.939(1) Å, Z = 12, wR2 = 0.080, 1683 F² values; Ca₃Cu₈Sn₄ (Nd₃Co₈Sn₄ type), P6₃mc, a = 9.125(1) Å, c = 7.728(1) Å, Z = 2, wR2 = 0.087, 704 F² values; CaCu₂Sn₂ (new structure type), C2/m, a = 10.943(3) Å, b = 4.222(1) Å, c = 4.834(1) Å, β = 107.94(1)°, Z = 2, wR2 = 0.051, 343 F² values; CaCu₉Sn₄ (LaFe₉Si₄ type), I4/mcm, a = 8.630(1) Å, c = 12.402(1) Å, Z = 4, wR2 = 0.047, 566 F² values. In all phases the shortest Cu‐Sn distances are in the range 2.59‐2.66Å, while the shortest Cu‐Cu distances are practically the same, 2.53‐2.54Å, except CaCuSn where no Cu‐Cu contacts occur.     

[μ‐4,5‐Bis(diphenylphosphino)‐9,9‐dimethylxanthene]bis[(trifluoroacetato)gold(I)] and its dichloromethane 0.58‐solvate

The dinuclear Au^I complex containing the 4,5‐bis(diphenylphosphino)‐9,9‐dimethylxanthene (xantphos) ligand and trifluoroacetate anions exists in a solvent‐free form, [μ‐4,5‐bis(diphenylphosphino)‐9,9‐dimethylxanthene]bis[(trifluoroacetato)gold(I)], [Au₂(C₂F₃O₂)₂(C₃₉H₃₂OP₂)], (I), and as a dichloromethane solvate, [Au₂(C₂F₃O₂)₂(C₃₉H₃₂OP₂)]·0.58CH₂Cl₂, (II). The trifluoroacetate anions are coordinated to the Au^I centres bridged by the xantphos ligand in both compounds. The Au^I atoms are in distorted linear coordination environments in both compounds. The phosphine substituents are in a syn arrangement in the xantphos ligand, which facilitates the formation of short aurophilic Au...Au interactions of 2.8966 (8) Å in (I) and 2.9439 (6) Å in (II).     

[{Na(7‐Nitro‐5‐sulfonate‐naphthalene‐1,4‐dicarboxy‐acid (H2O)2}·H2O]n: A Water‐Soluble 2D Layer Polymeric Complex with Microporous Molecular Channels

The X‐ray crystallographic studies are reported for a water‐soluble sodium complex of organic acid, {[Na(NSNDC)(H₂O)₂]·H₂O}_n, (NSNDC = 7‐Nitro‐5‐sulfonate‐napthalene‐1,4‐dicarboxy‐acid). It contains layers of vertically oriented NNSDC‐anions sandwiching cations and water molecules. The rows of anions are linked in a direction by sodium ions and along b by hydrogen bonding, which have microporous channels (9.410 × 3.210Ų) along the crystallographic b‐axis. Considering the Na coordination environments, π‐π stacking interaction between aryl ring and hydrogen bonds, the title compound represents a stably 2D infinitely extended structure.     

Molecular structures of 3‐[(2,2,3,3‐tetrafluoropropoxy)methyl]‐ and 3‐[(2,2,3,3,3‐pentafluoropropoxy)methyl]pyridinium saccharinates

The salts 3‐[(2,2,3,3‐tetrafluoropropoxy)methyl]pyridinium saccharinate, C₉H₁₀F₄NO⁺·C₇H₄NO₃S⁻, (1), and 3‐[(2,2,3,3,3‐pentafluoropropoxy)methyl]pyridinium saccharinate, C₉H₉F₅NO⁺·C₇H₄NO₃S⁻, (2), i.e. saccharinate (or 1,1‐dioxo‐1λ⁶,2‐benzothiazol‐3‐olate) salts of pyridinium with –CH₂OCH₂CF₂CF₂H and –CH₂OCH₂CF₂CF₃meta substituents, respectively, were investigated crystallographically in order to compare their fluorine‐related weak interactions in the solid state. Both salts demonstrate a stable synthon formed by the pyridinium cation and the saccharinate anion, in which a seven‐membered ring reveals a double hydrogen‐bonding pattern. The twist between the pyridinium plane and the saccharinate plane in (2) is 21.26 (8)° and that in (1) is 8.03 (6)°. Both salts also show stacks of alternating cation–anion π‐interactions. The layer distances, calculated from the centroid of the saccharinate plane to the neighbouring pyridinium planes, above and below, are 3.406 (2) and 3.517 (2) Å in (1), and 3.409 (3) and 3.458 (3) Å in (2).     

7‐Carboxyl­ato‐8‐hydroxy‐2‐methyl­quinolinium monohydrate and 7‐carboxy‐8‐hydroxy‐2‐methyl­quinolinium chloride monohydrate at 100 K

Both 7‐carboxyl­ato‐8‐hydroxy‐2‐methyl­quinolinium monohydrate, C₁₁H₉NO₃·H₂O, (I), and 7‐carboxy‐8‐hydroxy‐2‐methyl­quinolinium chloride monohydrate, C₁₁H₁₀NO₃⁺·Cl⁻·H₂O, (II), crystallize in the centrosymmetric P space group. Both compounds display an intramolecular O—H⋯O hydrogen bond involving the hydroxy group; this hydrogen bond is stronger in (I) due to its zwitterionic character [O⋯O = 2.4449 (11) Å in (I) and 2.5881 (12) Å in (II)]. In both crystal structures, the HN⁺ group participates in the stabilization of the structure via intermolecular hydrogen bonds with water mol­ecules [N⋯O = 2.7450 (12) Å in (I) and 2.8025 (14) Å in (II)]. In compound (II), a hydrogen‐bond network connects the Cl⁻ anion to the carboxylic acid group [Cl⋯O = 2.9641 (11) Å] and to two water mol­ecules [Cl⋯O = 3.1485 (10) and 3.2744 (10) Å].