Synthesis,Solid‐State NMR Characterization,and Application for Hydrogenation Reactions of a Novel Wilkinson’s‐Type Immobilized Catalyst

Silica nanoparticles (SiNPs) were chosen as a solid support material for the immobilization of a new Wilkinson’s‐type catalyst. In a first step, polymer molecules (poly(triphenylphosphine)ethylene (PTPPE); 4‐diphenylphosphine styrene as monomer) were grafted onto the silica nanoparticles by surface‐initiated photoinferter‐mediated polymerization (SI‐PIMP). The catalyst was then created by binding rhodium (Rh) to the polymer side chains, with RhCl₃ ? x H₂O as a precursor. The triphenylphosphine units and rhodium as Rh^I provide an environment to form Wilkinson’s catalyst‐like structures. Employing multinuclear (³¹P, ²⁹Si, and ¹³C) solid‐state NMR spectroscopy (SSNMR), the structure of the catalyst bound to the polymer and the intermediates of the grafting reaction have been characterized. Finally, first applications of this catalyst in hydrogenation reactions employing para‐enriched hydrogen gas (PHIP experiments) and an assessment of its leaching properties are presented.     

Natural Abundance 15N NMR by Dynamic Nuclear Polarization: Fast Analysis of Binding Sites of a Novel Amine‐Carboxyl‐Linked Immobilized Dirhodium Catalyst

A novel heterogeneous dirhodium catalyst has been synthesized. This stable catalyst is constructed from dirhodium acetate dimer (Rh₂(OAc)₄) units, which are covalently linked to amine‐ and carboxyl‐bifunctionalized mesoporous silica (SBA‐15?NH₂?COOH). It shows good efficiency in catalyzing the cyclopropanation reaction of styrene and ethyl diazoacetate (EDA) forming cis‐ and trans‐1‐ethoxycarbonyl‐2‐phenylcyclopropane. To characterize the structure of this catalyst and to confirm the successful immobilization, heteronuclear solid‐state NMR experiments have been performed. The high application potential of dynamic nuclear polarization (DNP) NMR for the analysis of binding sites in this novel catalyst is demonstrated. Signal‐enhanced ¹³C CP MAS and ¹⁵N CP MAS techniques have been employed to detect different carboxyl and amine binding sites in natural abundance on a fast time scale. The interpretation of the experimental chemical shift values for different binding sites has been corroborated by quantum chemical calculations on dirhodium model complexes.     

Bifunctional Heterogeneous Catalysis of Silica–Alumina‐Supported Tertiary Amines with Controlled Acid–Base Interactions for Efficient 1,4‐Addition Reactions

We report the first tunable bifunctional surface of silica–alumina‐supported tertiary amines (SA–NEt₂) active for catalytic 1,4‐addition reactions of nitroalkanes and thiols to electron‐deficient alkenes. The 1,4‐addition reaction of nitroalkanes to electron‐deficient alkenes is one of the most useful carbon–carbon bond‐forming reactions and applicable toward a wide range of organic syntheses. The reaction between nitroethane and methyl vinyl ketone scarcely proceeded with either SA or homogeneous amines, and a mixture of SA and amines showed very low catalytic activity. In addition, undesirable side reactions occurred in the case of a strong base like sodium ethoxide employed as a catalytic reagent. Only the present SA‐supported amine (SA–NEt₂) catalyst enabled selective formation of a double‐alkylated product without promotions of side reactions such as an intramolecular cyclization reaction. The heterogeneous SA–NEt₂ catalyst was easily recovered from the reaction mixture by simple filtration and reusable with retention of its catalytic activity and selectivity. Furthermore, the SA–NEt₂ catalyst system was applicable to the addition reaction of other nitroalkanes and thiols to various electron‐deficient alkenes. The solid‐state magic‐angle spinning (MAS) NMR spectroscopic analyses, including variable‐contact‐time ¹³C cross‐polarization (CP)/MAS NMR spectroscopy, revealed that acid–base interactions between surface acid sites and immobilized amines can be controlled by pretreatment of SA at different temperatures. The catalytic activities for these addition reactions were strongly affected by the surface acid–base interactions.     

An Investigation of 1:1 Adducts of Gallium Trihalides with Triarylphosphines by Solid‐State 69/71Ga and 31P NMR Spectroscopy

Several 1:1 adducts of gallium trihalides with triarylphosphines, X₃Ga(PR₃) (X=Cl, Br, and I; PR₃=triarylphosphine ligand), were investigated by using solid‐state ^69/71Ga and ³¹P NMR spectroscopy at different magnetic‐field strengths. The ^69/71Ga nuclear quadrupolar coupling parameters, as well as the gallium and phosphorus magnetic shielding tensors, were determined. The magnitude of the ⁷¹Ga quadrupolar coupling constants (C_Q(⁷¹Ga)) range from approximately 0.9 to 11.0 MHz . The spans of the gallium magnetic shielding tensors for these complexes, δ₁₁?δ₃₃, range from approximately 30 to 380 ppm; those determined for phosphorus range from 10 to 40 ppm. For any given phosphine ligand, the gallium nuclei are most shielded for X=I and least shielded for X=Cl, a trend previously observed for In^III–phosphine complexes. This experimental trend, attributed to spin‐orbit effects of the halogen ligands, is reproduced by DFT calculations. The signs of C_Q(^69/71Ga) for some of the adducts were determined from the analysis of the ³¹P NMR spectra acquired with magic angle spinning (MAS). The ¹J(^69/71Ga,³¹P) and ΔJ(^69/71Ga, ³¹P) values, as well as their signs, were also determined; values of ¹J(⁷¹Ga,³¹P) range from approximately 380 to 1590 Hz. Values of ¹J(^69/71Ga,³¹P) and ΔJ(^69/71Ga,³¹P) calculated by using DFT have comparable magnitudes and generally reproduce experimental trends. Both the Fermi‐contact and spin‐dipolar Fermi‐contact mechanisms make important contributions to the ¹J(^69/71Ga,³¹P) tensors. The ³¹P NMR spectra of several adducts in solution, obtained as a function of temperature, are contrasted with those obtained in the solid state. Finally, to complement the analysis of NMR spectra for these adducts, single‐crystal X‐ray diffraction data for Br₃Ga[P(p‐Anis)₃] and I₃Ga[P(p‐Anis)₃] were obtained.     

Enhanced Formaldehyde‐Vapor Adsorption Capacity of Polymeric Amine‐Incorporated Aminosilicas

Airborne formaldehyde, which is a highly problematic volatile organic compound (VOC) pollutant, is adsorbed by polymeric amine‐incorporated silicas (aminosilicas), and the factors that affect the adsorption performance are systematically investigated. Three different types of polymeric amines 1) poly(ethyleneimine) branched (PEIBR); 2) poly(ethyleneimine) linear (PEILI); and 3) poly(allylamine) (PAA) are impregnated into two types of porous silicas [SBA‐15 and mesocellular foam (MCF) silicas] with systematic changes of the amine loadings. The adsorption results demonstrate that the adsorption capacity increases along with the amine loading until the polymeric amines completely fill the silica pores. This results in the MCF silica, which has a larger pore volume and hence can accommodate more polymeric amine before completely filling the pore, giving materials that adsorb more formaldehyde, with the largest adsorption capacity, q, of up to 5.7 mmol_HCHO g^?1 among the samples studied herein. Of the three different types of polymers, PAA, comprised of 100 % primary amines, showed the highest amine efficiency μ (mmol_HCHO/mmol_N) for capturing formaldehyde. The chemical structures of the adsorbed formaldehyde are analyzed by ¹³C cross‐polarization magic‐angle spinning (CP‐MAS) NMR, and it is demonstrated that the adsorbed formaldehyde is chemically attached to the aminosilica surface, forming hemiaminal and imine species. Because the chemical adsorption of formaldehyde forms covalent bonds, it is not desorbed from the aminosilicas below 130 °C based on temperature‐programed‐desorption (TPD) analysis. The high formaldehyde‐adsorption capacity and stability of the trapped formaldehyde on the amine surface in this study reveal the potential utility of aminosilicas as formaldehyde abatement materials.     

Diselenadiphosphetandiselenide und Triselenadiphospholandiselenide – Synthese und Charakterisierung mittels 31P‐ und 77Se‐Festkörper‐NMRSpektroskopie

Diselenadiphosphetane Diselenides and Triselenadiphospholane Diselenides – Synthesis and Characterization by ³¹P and ⁷⁷Se Solid‐State NMR Spectroscopy 1,3‐Diselena‐2,4‐diphosphetane‐2,4‐diselenides (RPSe₂)₂ with R = Me, Et, t‐Bu, Ph, 4‐Me₂NC₆H₄, 4‐MeOC₆H₄ have been synthesized by different methods. The insoluble compounds were investigated by ³¹P and ⁷⁷Se solid‐state NMR and the purity of the compounds has been checked by their CP MAS sideband NMR spectra. The structure of the investigated compounds has been confirmed by the isotropic and anisotropic values of the chemical shifts and the ¹J_P–Se coupling constants. In addition, two new 1,2,4‐triselena‐3,5‐diphospholane‐3,5‐diselenides, (RPSe₂)₂Se (R = Me, Et), formed under similar synthesis conditions, were investigated. Their structure was derived from the ⁷⁷Se satellites of ³¹P solution spectra and from solid‐state spectra. For (t‐BuPSe₂)₂ the experimentally obtained principal values of phosphorus and selenium shielding tensors are compared with values from IGLO calculations (HF und SOS DFPT). The calculated orientations of the principal axes are discussed.     

Powder‐XRD and 14N magic angle‐spinning solid‐state NMR spectroscopy of some metal nitrides

Some metal nitrides (TiN, ZrN, InN, GaN, Ca₃N₂, Mg₃N₂, and Ge₃N₄) have been studied by powder X‐ray diffraction (XRD) and ¹⁴N magic angle‐spinning (MAS) solid‐state NMR spectroscopy. For Ca₃N₂, Mg₃N₂, and Ge₃N₄, no ¹⁴N NMR signal was observed. Low speed (ν_r = 2 kHz for TiN, ZrN, and GaN; ν_r = 1 kHz for InN) and ‘high speed’ (ν_r = 15 kHz for TiN; ν_r = 5 kHz for ZrN; ν_r = 10 kHz for InN and GaN) MAS NMR experiments were performed. For TiN, ZrN, InN, and GaN, powder‐XRD was used to identify the phases present in each sample. The number of peaks observed for each sample in their ¹⁴N MAS solid‐state NMR spectrum matches perfectly well with the number of nitrogen‐containing phases identified by powder‐XRD. The ¹⁴N MAS solid‐state NMR spectra are symmetric and dominated by the quadrupolar interaction. The envelopes of the spinning sidebands manifold are Lorentzian, and it is concluded that there is a distribution of the quadrupolar coupling constants Q_cc's arising from structural defects in the compounds studied. Copyright © 2015 John Wiley & Sons, Ltd.     

On the Surface Reactivity of Functionalized Phosphinines on Inorganic Supports

Phosphinines with pendant phenol or catechol functionalities and their gold(I) complexes were synthesised and characterised by spectroscopic data and in one case by a single‐crystal X‐ray diffraction study. Reactions of ligands or complexes with TiO₂ or chloropropyl modified hexagonal mesoporous silica were then studied with the aim to immobilise ligands or complexes on the carrier by covalent tethering. ³¹P MAS NMR studies revealed that immobilisation on TiO₂ was accompanied by complete degradation of the phosphinine moiety. Base induced coupling with chloropropyl modified silica produced a material that contained a mixture of several surface‐bound phosphorus compounds. ³¹P MAS NMR studies revealed that approx. 40 % of the ligand had retained its integrity whereas the remaining fraction had been converted into further, not unambiguously identified structures.     

Synthesis of Enantiomerically Pure 1,5,5‐Trideuterated cis‐ and trans‐2,4‐Dioxa‐3‐phosphadecalins. 31P‐NMR Evidence of Covalent‐Bond Formation and the Stereochemical Implications in the Course of the Inhibition of δ‐Chymotrypsin

The irreversible inhibition of δ‐chymotrypsin with the enantiomerically pure, P(3)‐axially and P(3)‐equatorially X‐substituted cis‐ and trans‐configurated 2,4‐dioxa‐3‐phospha(1,5,5‐²H₃)bicyclo[4.4.0]decane 3‐oxides (X=F, 2,4‐dinitrophenoxy) was monitored by ³¹P‐NMR spectroscopy. ¹H‐Correlated ³¹P{²H}‐NMR spectra enabled the direct observation of the vicinal coupling (³J) between the P‐atom of the inhibitor and the CH₂O moiety of Ser¹⁹⁵ (=‘Ser¹⁹⁵’(CH₂O)), thus establishing the covalent nature of the ‘Ser¹⁹⁵’(CH₂O? P) bond in the inhibited enzyme. The stereochemical course of the phosphorylation is dependent on the structure of the inhibitor, and neat inversion, both inversion and retention, as well as neat retention of the configuration at the P‐atom was found.     

Solid‐state NMR spectroscopy of Pb‐rich apatite

Pb‐containing hydroxylapatite phases synthesized under aqueous conditions were investigated by X‐ray diffraction and solid‐state nuclear magnetic resonance (NMR) techniques to determine the Pb, Ca distribution. ³¹P and ¹H magic‐angle spinning (MAS) NMR results indicate slight shifts of the isotropic chemical shift with increased Ca content and complex lineshapes at compositions with near equal amounts of Ca and Pb. ³¹P{²⁰⁷Pb} and ¹H{²⁰⁷Pb} rotational‐echo double resonance (REDOR) results for intermediate compositions show that resolved spectral features cannot be assigned simply in terms of local Ca, Pb configurations or coexisting phases. ²⁰⁷Pb MAS NMR spectra are easily obtained for these materials and contain well‐resolved resonances for crystallographically unique A1 and A2 Pb sites. Splitting of the A1 and A2 ²⁰⁷Pb resonances for pure hydroxyl‐pyromorphite (Pb₁₀(PO₄)₆(OH)₂) compared to natural pyromorphite (Pb₅(PO₄)₃Cl) suggests symmetry reduced from hexagonal. We find that ²⁰⁷Pb{¹H} CP/MAS NMR is impractical in Pb‐rich hydroxylapatites due to fast ²⁰⁷Pb relaxation. Copyright © 2009 John Wiley & Sons, Ltd.     

Investigation of two‐ and three‐bond carbon–hydrogen coupling constants in cinnamic acid based compounds

Two‐ and three‐bond coupling constants (²J_HC and ³J_HC) were determined for a series of 12 substituted cinnamic acids using a selective 2D inphase/antiphase (IPAP)‐single quantum multiple bond correlation (HSQMBC) and 1D proton coupled ¹³C NMR experiments. The coupling constants from two methods were compared and found to give very similar values. The results showed coupling constant values ranging from 1.7 to 9.7 Hz and 1.0 to 9.6 Hz for the IPAP‐HSQMBC and the direct ¹³C NMR experiments, respectively. The experimental values of the coupling constants were compared with discrete density functional theory (DFT) calculated values and were found to be in good agreement for the ³J_HC. However, the DFT method under estimated the ²J_HC coupling constants. Knowing the limitations of the measurement and calculation of these multibond coupling constants will add confidence to the assignment of conformation or stereochemical aspects of complex molecules like natural products. Copyright © 2016 John Wiley & Sons, Ltd.     

Distribution and mobility of phosphates and sodium ions in cheese by solid‐state 31P and double‐quantum filtered 23Na NMR spectroscopy

The feasibility of solid‐state magic angle spinning (MAS) ³¹P nuclear magnetic resonance (NMR) spectroscopy and ²³Na NMR spectroscopy to investigate both phosphates and Na⁺ ions distribution in semi‐hard cheeses in a non‐destructive way was studied. Two semi‐hard cheeses of known composition were made with two different salt contents. ³¹P Single‐pulse excitation and cross‐polarization MAS experiments allowed, for the first time, the identification and quantification of soluble and insoluble phosphates in the cheeses. The presence of a relatively ‘mobile’ fraction of colloidal phosphates was evidenced. The detection by ²³Na single‐quantum NMR experiments of all the sodium ions in the cheeses was validated. The presence of a fraction of ‘bound’ sodium ions was evidenced by ²³Na double‐quantum filtered NMR experiments. We demonstrated that NMR is a suitable tool to investigate both phosphates and Na⁺ ions distributions in cheeses. The impact of the sodium content on the various phosphorus forms distribution was discussed and results demonstrated that NMR would be an important tool for the cheese industry for the processes controls. Copyright © 2010 John Wiley & Sons, Ltd.     

Cooperative Acid–Base Effects with Functionalized Mesoporous Silica Nanoparticles: Applications in Carbon–Carbon Bond‐Formation Reactions

Acid–base bifunctional mesoporous silica nanoparticles (MSN) were prepared by a one‐step synthesis by co‐condensation of tetraethoxysilane (TEOS) and silanes possessing amino and/or sulfonic acid groups. Both the functionality and morphology of the particles can be controlled. The grafted functional groups were characterized by using solid‐state ²⁹Si and ¹³C cross‐polarization/magic angle spinning (CP/MAS) NMR spectroscopy, thermal analysis, and elemental analysis, whereas the structural and the morphological features of the materials were evaluated by using XRD and N₂ adsorption–desorption analyses, and SEM imaging. The catalytic activities of the mono‐ and bifunctional mesoporous hybrid materials were evaluated in carbon–carbon coupling reactions like the nitroaldol reaction and the one‐pot deacetalization–nitroaldol and deacetalization–aldol reactions. Among all the catalysts evaluated, the bifunctional sample containing amine and sulfonic acid groups (MSN–NNH₂–SO₃H) showed excellent catalytic activity, whereas the homogeneous catalysts were unable to initiate the reaction due to their mutual neutralization in solution. Therefore a cooperative acid–base activation is envisaged for the carbon–carbon coupling reactions.     

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

N‐Trimethylsilyl‐aminophosphines: Solution‐state Structures,Studied by Multinuclear Magnetic Resonance and DFT Methods

A novel fairly stable N‐trimethylsilylamino(dichloro)phosphine was prepared, in which the nitrogen atom bears a 9‐borabicyclo[3.3.1]nonyl group. The gas phase structures of various amino‐ and silylaminophosphines including a phosphenium cation and an amino(imono)phosphine were optimized at the B3LYP/6‐311+G(d,p) level of theory, and NMR parameters were calculated. Both magnitude and sign of the two‐bond coupling constants ²J(³¹P,N,¹³C) and ²J(³¹P,N,²⁹Si), known to be sensitive towards the respective conformation, are well reproduced by the calculations. This also holds for ¹J(³¹P,¹⁵N), although calculated values ¹K(³¹P,¹⁵N) (all < 0) are slightly more negative [¹J(³¹P,¹⁵N) more positive] than experimental values.     

Phosphatation of Zeolite H‐ZSM‐5: A Combined Microscopy and Spectroscopy Study

A variety of phosphated zeolite H‐ZSM‐5 samples are investigated by using a combination of Fourier transfer infrared (FTIR) spectroscopy, single pulse ²⁷Al, ²⁹Si, ³¹P, ¹H‐³¹P cross polarization (CP), ²⁷Al‐³¹P CP, and ²⁷Al 3Q magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy, scanning transmission X‐ray microscopy (STXM) and N₂ physisorption. This approach leads to insights into the physicochemical processes that take place during phosphatation. Direct phosphatation of H‐ZSM‐5 promotes zeolite aggregation, as phosphorus does not penetrate deep into the zeolite material and is mostly found on and close to the outer surface of the zeolite, acting as a glue. Phosphatation of pre‐steamed H‐ZSM‐5 gives rise to the formation of a crystalline tridymite AlPO₄ phase, which is found in the mesopores of dealuminated H‐ZSM‐5. Framework aluminum species interacting with phosphorus are not affected by hydrothermal treatment. Dealuminated H‐ZSM‐5, containing AlPO₄, retains relatively more framework Al atoms and acid sites during hydrothermal treatment than directly phosphated H‐ZSM‐5.     

Silica‐Grafted Tris(neopentyl)aluminum: A Monomeric Aluminum Solid Co‐catalyst for Efficient Nickel‐Catalyzed Ethene Dimerization

A silica‐supported monomeric alkylaluminum co‐catalyst was prepared via surface organometallic chemistry by contacting tris(neopentyl)aluminum and partially dehydroxylated silica. This system, fully characterized by solid‐state ²⁷Al NMR spectroscopy augmented by computational studies, efficiently activates (ⁿBu₃P)₂NiCl₂ towards dimerization of ethene, demonstrating comparable activity to previously reported dimeric diethylaluminum chloride supported on silica. Three types of aluminum surface species have been identified: monografted tetracoordinated Al species as well as two types of bisgrafted Al species—tetra‐ and pentacoordinated. Of them, only the monografted Al species is proposed to be able to activate the (ⁿBu₃P)₂NiCl₂ complex and generate the active cationic species.     

A Chiral Amide Derivative with the β‐P4S3 Cage Skeleton

The diamide exo, exo‐β‐P₄S₃(NHCH(Me)Ph)₂ has been made in solution using enantiomerically pure or racemic PhCH(Me)NH₂, and its three diastereomers characterised by complete analysis of their ³¹P{¹H} NMR spectra.The unsymmetric diastereomer contains phosphorus atoms, made chemically non‐equivalent by the chirality of the substituents, which show a large ²J(P—P—P) coupling to each other (225.2 Hz).     

Tripod Immobilization of Triphenylphosphane on a Silica‐Gel Surface to Enable Selective Mono‐Ligation to Palladium: Application to Suzuki–Miyaura Cross‐Coupling Reactions with Chloroarenes

A silica‐supported triphenylphosphane (Silica‐3p‐TPP) with a Ph₃P‐type core, immobilized on a silica surface, was synthesized and characterized by nitrogen‐absorption measurements and solid‐state NMR spectroscopy. The tripodal immobilization constrains the mobility of the phosphane molecule and causes the lone pair on the phosphorus atom to face in the direction perpendicular to the support, resulting in the selective formation of a 1:1 metal–phosphane species that is free from unfavorable steric repulsions caused by the silica surface. Heterogeneous Pd catalysts created in this manner enabled room‐temperature Suzuki–Miyaura cross‐coupling reactions with unactivated chloroarenes, despite the moderate electronic and steric nature of the Ph₃P‐based ligands. These catalysts also showed potential in reactions with more challenging substrates under mild conditions. Tripodally immobilized and well‐dispersed phosphanes on the silica surface were crucial for high catalytic activity.     

Solid‐state 31P NMR investigation on the status of guanine nucleotides in paclitaxel‐stabilized microtubules

Microtubule dynamics is a target for many chemotherapeutic drugs. In order to understand the biochemical effects of paclitaxel on the GTPase activity of tubulin, the status of guanine nucleotides in microtubules was investigated by ³¹P cross‐polarization magic angle spinning (CPMAS) NMR. Microtubules were freshly prepared in vitro in the presence of paclitaxel and then lyophilized in sucrose buffer for solid‐state NMR experiments. A ³¹P CPMAS NMR spectrum with the SNR of 25 was successfully acquired from the lyophilized microtubule sample. The broadness of the ³¹P spectral lines in the spectrum indicates that the molecular environments around the guanine nucleotides inside tubulin may not be as crystalline as reported by many diffraction studies. Deconvolution of the spectrum into four spectral components was carried out in comparison with the ³¹P NMR spectra obtained from five control samples. The spectral analysis suggested that about 13% of the nucleotides were present as GTP and 37% as GDP in the β‐tubulin (E‐site) of the microtubules. It was found that most of the GDPs were present as GDP‐P_i complex in the microtubules, which seems to be one of the effects of paclitaxel binding. Copyright © 2015 John Wiley & Sons, Ltd.