多元曲线分辨方法和红外光谱用于奥克托今合成机理

通过红外光谱在线监测1,5-二乙酰基-3,7-二硝基-1,3,5,7-四氮杂环辛烷（简写DADN）合成奥克托今(HMX)的反应过程,利用渐进因子分析(EFA)、多元曲线分辨 交替最小二乘法(MCR-ALS)和直观推导式演进特征投影法(HELP)等化学计量学方法对反应过程获得的光谱信息进行解析,得到了各组分浓度变化曲线和对应的红外光谱,并将MCR-ALS和HELP两种方法的分析结果进行比较,得出可相互验证的一致结论,从而推测出该反应合理的反应机理。 所得结果与文献报道吻合,表明化学计量学方法结合在线红外光谱是研究奥克托今合成机理的有效手段。     

多元曲线分辨等方法和红外光谱用于二硝基五亚甲基四胺的合成反应机理研究

通过红外光谱在线监测强酸催化下硝酰胺、甲醛和氨水合成二硝基五亚甲基四胺(DPT)的反应过程, 利用渐进因子分析(EFA)、直观推导式演进特征投影法(HELP)和多元曲线分辨-交替最小二乘法(MCR-ALS)等化学计量学方法对反应过程获得的红外光谱信息进行解析, 得到了各组分纯物质的浓度变化曲线和对应的红外光谱, 并把多元曲线分辨-交替最小二乘法与直观推导式演进特征投影法的分析结果进行比较, 得出可相互验证的一致结论, 以此推测出该反应合理的反应机理. 化学计量学方法对在线红外光谱信息的分辨可以快速有效地反映DPT合成过程中各组分的浓度和红外光谱变化情况, 对其反应机理研究具有重要指导意义.     

多元曲线分辨结合在线红外用于3-氨基-4-氨基肟基呋咱的合成反应机理

利用红外光谱在线监测丙二睛、亚硝酸钠和盐酸羟胺合成3-氨基-4-氨基肟基呋咱的反应过程,采用多元曲线分辨-交替最小二乘法（MCR-ALS）、直观推导式演进特征投影法(HELP)等化学计量学方法对反应过程所获得的实时红外光谱数据矩阵进行解析,得到了各组分纯物质的浓度变化曲线和对应的红外光谱,并将多元曲线分辨 交替最小二乘法与直观推导式演进特征投影法的分析结果进行比较,得出可相互验证的一致结论,据此推出该反应合理的反应机理。 2种方法得到的反应物与生成物的光谱与原光谱的相似度近似于1,说明该解析方法具有准确性和可靠性。 结果表明,化学计量学结合红外光谱可有效的应用于3-氨基-4-氨基肟基呋咱合成过程的机理推断。     

化学计量学和红外光谱研究3,5-二氨基-1,2,4-三唑合成机理

通过红外光谱在线监测3,5-二氨基-1,2,4-三唑(DAT)的合成过程,应用多元曲线分辨-交替最小二乘法(MCR-ALS)对过程中获得的光谱数据矩阵进行解析,推导出合理的反应机理.反应以水为背景,依次加入二氰二胺与二盐酸肼固体,用红外探头监测反应全过程.用MCR-ALS法对所得光谱数据进行解析,得到反应物、中间体和产...     

直观推导式演进特征投影法对酶催化反应的过程分析

以丁香酸(syringic acid)为模型化合物, 研究了漆酶(laccase)催化降解木质素(lignin)的复杂生化反应过程, 设计了一种反应过程动态量测系统, 该系统可以在5 s的时间间隔测定反应体系在190～800 nm波长范围内的实时光谱信息. 利用固定窗口因子分析-直观推导式演进特征投影法(FSMWEFA-HELP), 解析反应过程中测得的实时动力学光谱数据矩阵, 得到反应物和中间体的数目及其浓度的变化和纯物质的光谱曲线, 并推导出合理的反应机理. 将所得结果与多元曲线分辨-交替最小二乘(MCR-ALS)方法进行了比较.     

独立成分分析结合在线红外技术研究3,4-双(4'-氨基呋咱基-3')氧化呋咱的合成反应机理

利用在线红外技术监测3,4-双(4'-氨基呋咱基-3')氧化呋咱(DATF)的合成过程,并结合核独立成分分析算法对反应过程中获得的实时红外光谱数据进行解析,得到了反应物、中间体及产物各组分纯物质的红外光谱图.采用密度泛函理论B3LYP法,在6-31+G(d,p)基组水平上求得中间体的红外振动光谱,验证了所分离红外光谱图的正确性,从而推导出合理的合成反应机理.结果表明,核独立成分分析算法能合理地解析红外光谱在线数据,并有效捕捉合成反应的中间体,对合成反应机理的研究具有重要的指导意义.     

双酚A与小牛胸腺DNA的嵌插作用

在pH7.4Tris-HCl缓冲条件下,应用多种光谱学方法并结合化学计量学多元曲线分辨-交替最小二乘法(MCR-ALS)、DNA熔点测量、粘度分析以及分子模拟技术,研究了环境雌激素双酚A(BPA)与小牛胸腺DNA(ctDNA)的相互作用。由MCR-ALS解析扩展的紫外光谱数据矩阵,得到了3个反应组分(BPA、ctDNA及BPA-ctDNA复合物)的相对浓度及其光谱曲线,可评估BPA与ctDNA相互作用进程。BPA引起ctDNA熔点和粘度升高、与吖啶橙竞争结合ctDNA表明BPA通过嵌插模式与ctDNA作用。傅里叶红外光谱研究显示,BPA主要结合在ctDNA的A,T碱基富集区,这与分子模拟结果一致。圆二光谱分析表明,BPA与ctDNA作用诱导ctDNA的结构由B构象向A构象转变。     

根据动力学-光谱数据解析高锰酸钾氧化草酸钠的反应过程

通过在线测量硫酸介质中高锰酸钾氧化草酸钠反应过程的光谱变化，获得了动力学—光谱二维数据。借助主成分分析法，确定了高锰酸钾的单信息区，并确认反应过程中产生了一种有吸收的中间体。根据最小二乘回归等化学计量学方法，结合相关组分间存在等吸收点这一光谱特征及质量平衡原理，成功地解折出反应体系中相关组分的实际动力学谱及纯光谱。根据Savitsky-Golay求导法，获得了各组分的速率曲线。对解析结果的进一步研究表明，该反应符合自催化模式。     

GC-MS结合保留指数对中药挥发油的定性

利用GC-MS联用和化学计量学方法,对6种中药挥发油进行分析,对其中的重叠色谱峰采用直观推导式演进特征投影法(HELP)法进行了分辨,同时计算了各组分的程序升温保留指数,通过质谱库定性.得到共有成分32个.结果表明,保留指数有很好的重复性,可与质谱库结合用作物质的定性.     

HELP法在中草药分析中的应用研究 －冬虫夏草的化学成分测定

基于直观推导式演进特征投影(HELP)法,对冬虫夏草子座和虫体分别进行了多组分同时定性定量测定.结果表明,HELP法能减少样本提取分离的步骤,降低色谱分离条件的要求,提高检测准确度.联用色谱检测与化学计量学解析法相结合将为复杂中草药分析提供一种全新手段.     

1,4-二氨基-3,6-二硝基吡唑[4,3-c]并吡唑的合成、热性能及量子化学研究

以自制的3,5-二甲基-4-氨基吡唑为原料,经重氮化、环化、硝化、氧化、脱羧硝化以及N-胺化等反应合成了1,4-二氨基-3,6-二硝基吡唑[4,3-c]并吡唑(LLM-119),采用红外光谱、核磁共振、质谱及元素分析等手段表征了中间体及目标物的结构;对4-重氮基-3,5-二甲基吡唑内盐的后处理方法进行了改进,采用冷冻结晶法代替萃取法,避免大量使用有机试剂,简化操作过程,收率由77.0%提高到86.1%;初步探讨了N-胺化反应的机理,从理论上分析了收率偏低的原因;利用DSC,TG等热分析手段研究了LLM-119的热性能,其热分解峰温为232.05℃,表明LLM-119具有较好的热稳定性;首次采用B3LYP方法,在6-31G(d,p)基组水平上对LLM-119的结构进行了全参数优化,获得其稳定的几何构型和键级;在振动分析的基础上求得体系的振动频率、IR谱及不同温度下的热力学性质,并得到了温度对热力学性能影响的关系式;用Monte-Carlo方法从理论上计算LLM-119的密度为1.85 g/cm3,与实验值接近,运用Kamlet公式预测爆速为8733.94 m/s.     

Time-resolved resonance Raman and density functional study of an azirine intermediate in the 2-fluorenylnitrene ring-expansion reaction to form a dehydroazepine product

We report time-resolved resonance Raman spectra for the azirine intermediate produced in the 2-fluorenylnitrene ring-expansion reaction to form a dehydroazepine product. The Raman bands obtained with a 252.7 nm probe wavelength and 500 ns delay time exhibit reasonable agreement with predicted vibrational frequencies from density functional calculations for two isomers of azirine intermediates that may be formed from a 2-fluorenylnitrene precursor. The Raman bands observed for delay times of 15 ns and 10 micros were consistent with predicted vibrational frequencies from density functional calculations for the 2-fluorenylnitrene and dehydroazepine product species as well as previously reported 416 nm time-resolved Raman spectra obtained on the ns and micros time scales. Our results demonstrate that the 2-fluorenylnitrene ring-expansion reaction to produce dehydroazepine products proceeds via relatively long-lived 2-fluorenylnitrene and azirine intermediates. Substitution of a phenyl ring para to the nitrene group of phenylnitrene appears to lead to significant changes in the ring-expansion reaction so that longer lived arylnitrene and azirine intermediates can be observed. This should enable the chemical reactivity of azirine intermediates formed from arylnitrenes to be examined more readily.     

4,6-二硝基-5,7-二氨基苯并氧化呋咱(CL-14)的合成与表征

以2,4,6-三硝基氯苯为原料, 经过叠氮化、脱氮环化和异常亲核取代氢(VNS)反应合成了4,6-二硝基-5,7-二氨基苯并氧化呋咱(CL-14), 三步总收率达到50.3%, 并采用红外光谱、核磁共振光谱、元素分析等进行了结构表征|确定了合成CL-14的最佳VNS反应条件: 以盐酸羟氨作为VNS试剂, 20～40 ℃下反应6 h, 收率达到60%(文献值53%). 研究结果表明, CL-14具有良好的感度特性和热安定性, 其撞击感度与中间产物4,6-二硝基苯并氧化呋咱(DNBF)基本相当, 而其摩擦感度远低于其DNBF|DSC和TG-DTG实验发现, CL-14仅有一个分解过程, 其分解峰温为308.52 ℃.     

Experimental Study of C2Cl3+NO2 Reaction

The free radical reaction of C2Cl3 with NO2 was investigated by step-scan time-resolved FTIR (TR-FTIR) emission spectroscopy. Due to the vibrationally excited products of Cl2CO, NO, and CO, strong IR emission bands were observed with high resolution TR-FTIR spectra. Four reaction channels forming C2Cl3O+NO, CCl3CO+NO, CO+NO+CCl3, and ClCNO+Cl2CO were elucidated, respectively. Spectralˉtting showed that the product CO was highly vibrationally excited with the nascent average vibrational energy of 60.2 kJ/mol. Possible reaction mechanism via intermediates C2Cl3NO2 and C2Cl3ONO was proposed.     

Theoretical study on the vibrational structure of S0 thiophosgene from the origin to dissociation

In this work, using our vibrational variational calculation method and a recently derived refined quartic potential energy surface for S₀ thiophosgene, we have carried out large scale vibrational calculations to analyze the vibrational structure of this electronic state in the whole range of vibrational excitation energies down from the origin and up to the dissociation limit (at ↼20,000 cm^↙1). In the lower excited vibrational range we have achieved satisfactory coincidence of calculated to experimentally measured frequencies, while at the higher vibrational excitations our main objective has been to estimate what part of the available vibrational level density is effectively involved into the vibrational mixing and IVR. The results from our calculations have been compared to the available experimentally obtained dataset (obtained from synchrotron IR, SEP and LIF spectra) as well as to conclusions from the analyses by other authors using local coupling models.     

Infrared absorption of gaseous CH3OO detected with a step-scan Fourier-transform spectrometer

CH(3)OO radicals were produced upon irradiation of a flowing mixture of CH(3)I and O(2) with a KrF excimer laser at 248 nm. A step-scan Fourier-transform spectrometer coupled with a multipass absorption cell was employed to record temporally resolved IR absorption spectra of reaction intermediates. Transient absorption bands with origins at 3033, 2954, 1453, 1408, 1183, 1117, 3020, and 1441 cm(-1) are assigned to nu(1)-nu(6), nu(9), and nu(10) modes of CH(3)OO, respectively, close to wavenumbers reported for CH(3)OO isolated in solid Ar. Calculations with density-functional theory (B3LYP/aug-cc-pVTZ) predicted the geometry and the vibrational wavenumbers of CH(3)OO; the vibrational wavenumbers and relative IR intensities of CH(3)OO agree satisfactorily with these observed features. The rotational contours of IR spectra of CH(3)OO, simulated based on ratios of predicted rotational parameters for the upper and lower states and on experimental rotational parameters of the ground state, agree satisfactorily with experimental results; the mixing ratios of a-, b-, and c-types of rotational structures were evaluated based on the direction of dipole derivatives predicted quantum chemically. A feature at 995 cm(-1), ascribed to CH(3)OOI from a secondary reaction of CH(3)OO with I, was also observed.     

From Infrared Spectra to Macroscopic Mechanical Properties of sH Gas Hydrates through Atomistic Calculations

The vibrational characteristics of gas hydrates are key identifying molecular features of their structure and chemical composition. Density functional theory (DFT)-based IR spectra are one of the efficient tools that can be used to distinguish the vibrational signatures of gas hydrates. In this work, ab initio DFT-based IR technique is applied to analyze the vibrational and mechanical features of structure-H (sH) gas hydrate. IR spectra of different sH hydrates are obtained at 0 K at equilibrium and under applied pressure. Information about the main vibrational modes of sH hydrates and the factors that affect them such as guest type and pressure are revealed. The obtained IR spectra of sH gas hydrates agree with experimental/computational literature values. Hydrogen bond’s vibrational frequencies are used to determine the hydrate’s Young’s modulus which confirms the role of these bonds in defining sH hydrate’s elasticity. Vibrational frequencies depend on pressure and hydrate’s O···O interatomic distance. OH vibrational frequency shifts are related to the OH covalent bond length and present an indication of sH hydrate’s hydrogen bond strength. This work presents a new route to determine mechanical properties for sH hydrate based on IR spectra and contributes to the relatively small database of gas hydrates’ physical and vibrational properties.     

Synthesis, characterization and quantum chemistry study of 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine

3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)- 1,2,4,5-tetrazine (BTATz) was synthesized by the condensation of triaminoguanidinium nitrate with 2,4-pentanedione, followed by oxidation and substitution reaction. The product was characterized by elemental analysis, IR, NMR spectrometry and DSC analysis. Instead of nitrogen dioxide/N-methylpyrrolidone, acetic acid/sodium nitrite was used as the oxidizer during the oxidation. Thus, the cost was reduced and the process was simplified. The theoretical properties of BTATz were estimated by a B3LYP method based on a 6-31G(d,p) basis set, and the stable geometric configuration and bond order were obtained. The vibrational frequencies, IR spectrum and thermodynamic properties under different temperatures were obtained from vibrational analysis and the relationship between temperature and thermodynamics properties was deduced. Pyrolysis mechanism of BTATz was discussedand the transition state and activation energy of ring opening reaction of the tetrazole were deduced. __________ Translated from Chinese Journal of Organic Chemistry, 2008, 28(3) (in Chinese)