A novel ternary GO@SiO2‐HPW nanocomposite as an efficient heterogeneous catalyst for the synthesis of benzazoles in aqueous media

A new solid acid catalyst, consisting of 12‐phosphotungstic heteropoly acid (HPW) supported on graphene oxide/silica nanocomposite (GO@SiO₂), has been developed via immobilizing HPW onto an amine‐functionalized GO/SiO₂ surface through coordination interaction (GO@SiO₂‐HPW). The GO@SiO₂‐HPW nanocomposite was characterized by Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and powder X‐ray diffraction (XRD). The prepared nanocomposite could be dispersed homogeneously in water and further used as a heterogeneous, reusable, and efficient catalyst for the synthesis of benzimidazoles and benzothiazoles by the reaction of 1,2‐phenelynediamine or 2‐aminothiophenol with different aldehydes.     

Efficient and Magnetically Recoverable “Click” PEGylated γ‐Fe2O3–Pd Nanoparticle Catalysts for Suzuki–Miyaura,Sonogashira, and Heck Reactions with Positive Dendritic Effects

The engineering of novel catalytic nanomaterials that are highly active for crucial carbon–carbon bond formations, easily recoverable many times, and biocompatible is highly desirable in terms of sustainable and green chemistry. To this end, catalysts comprising dendritic “click” ligands that are immobilized on a magnetic nanoparticle (MNP) core, terminated by triethylene glycol (TEG) groups, and incorporate Pd nanoparticles (PdNPs) have been prepared. These nanomaterials are characterized by transmission electron microscopy (TEM), high‐resolution TEM, inductively coupled plasma analysis, Fourier transform infrared spectroscopy, X‐ray photoelectron spectra and energy‐dispersive X‐ray spectroscopy. They are shown to be highly active, dispersible, and magnetically recoverable many times in Suzuki, Sonogashira, and Heck reactions. In addition, a series of pharmacologically relevant or natural products were successfully synthesized using these magnetic PdNPs as catalyst. For comparison, related PdNP catalysts deposited on MNPs bearing linear “click” PEGylated ligands are also prepared. Strong positive dendritic effects concerning ligand loading, catalyst loading, catalytic activity, and recyclability are observed, that is, the dendritic catalysts are much more efficient than non‐dendritic analogues.     

磁性纳米复合氧化物固体酸催化剂的制备及酯化性能

固体酸催化剂的无腐蚀、环境友好和可循环使用等特点使其成为无机液体酸的最佳替代物.磁性纳米固体酸具有优于常规固体酸催化剂的催化活性及分离简单的特性.用共沉淀法分别合成了一系列三组分TiO2-Al2O3-Fe3O4(TAF)和CeO2-Al2O3-Fe3O4(CAF)及四组分ZrO2--Al2O3-Fe3O4(ZACF)磁性纳米复合氧化物固体酸催化剂,通过电感耦合等离子体原子发射光谱、比表面积测定、X射线衍射、透射电镜、热重分析和红外光谱等对其进行了表征,并利用酯化反应作为探针反应评价了其催化性能.结果表明,合成的磁性纳米固体酸催化剂在酯化反应中表现出很好的催化活性.     

Photocatalytic Degradation of Imidacloprid by Phosphotungstic Acid Supported on a Mesoporous Sieve MCM‐41

Solid catalysts consisting of polyoxometalates (POM) namely phosphotungstic acid H₃PW₁₂O₄₀ (HPW) supported on a mesoporous sieve MCM‐41 have been prepared and characterized by FT‐IR, X‐ray diffraction, nitrogen adsorption and high resolution transmission electron microscope (HRTEM). The HPW/MCM‐41 with different HPW loadings from 10 to 60 wt% possess large specific surface area and rather uniform mesopores. Keggin structure of HPW retains on the prepared composite catalysts. The photocatalytic performance of HPW/MCM‐41 was examined by degradation of a durable pesticide imidacloprid. It is found that the prepared photocatalysts exhibit high activity under irradiation of 365 nm monochromatic light. For 50 mL of imidacloprid (10 mg/L), conversion of imidacloprid using 20 mg of HPW/MCM‐41 with 50 wt% loading level and calcined at 300°C reaches 58.0% after 5 h irradiation.     

N‐(3‐silyl propyl) diethylene triamine N,N',N'‐tri‐sulfonic acid immobilized on Fe3‐xTixO4 magnetic nanoparticles: A new recyclable heterogeneous nanocatalyst for the synthesis of hexahydroquinolines

In the present study, for the first time N‐(3‐silyl propyl) diethylene triamine N,N',N''‐tri‐sulfonic acid (SPDETATSA) was grafted on magnetic Fe_3‐xTi_xO₄ nanoparticles. The structure of the resulted nanoparticles was characterized based on Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) analyses. The results confirmed the successful immobilization of sulfamic acid groups onto the magnetic support. These nanoparticles exhibited high catalytic activity as novel magnetically recyclable acid nanocatalyst in the synthesis of a diverse range of hexahydroquinolines through one‐pot tandem reactions in excellent yields. Also, this nanocatalyst performed satisfactory catalytic maintenance of activity for the synthesis of the reaction products after 4 rounds of recycling with no considerable loss of activity.     

Magnetic nanoporous MCM‐41 supported ionic liquid/palladium complex: An efficient nanocatalyst with high recoverability

In this study, a novel magnetic mesoporous MCM‐41 silica supported ionic liquid/palladium complex (Fe₃O₄@MCM@IL/Pd) with core‐structure was prepared and characterized and its catalytic performance was developed under green conditions. The Fe₃O₄@MCM@IL/Pd was prepared via a post grafting method and was characterized using Fourier transform infrared spectroscopy, thermal gravimetric analysis, wide‐ and low‐angle powder X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, vibration sample magnetometer and energy‐dispersive X‐ray analyses. This was applied as an efficient and recoverable nanocatalyst for the one‐pot synthesis of pyrano[2,3‐d]pyrimidine derivatives under ultrasonic conditions. The catalyst was magnetically recovered and reused for 12 consecutive cycles without significant loss of its activity and selectivity.     

H3PW12O40/mpg‐C3N4 as an efficient and reusable catalyst in the alkylation of o‐xylene and styrene

A heterogeneous catalyst (HPW/mpg‐C₃N₄) for the alkylation of o‐xylene and styrene reaction was acquired by the immobilization of phosphotungstic acid (HPW) on mesoporous graphitic carbon nitride (mpg‐C₃N₄) through electrostatic interaction. The results of Fourier transform infrared spectroscopy (FT‐IR), X‐ray powder diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) proved that HPW was successfully immobilized on the protonated mpg‐C₃N₄ by electrostatic interaction. The textural properties and morphology of HPW/mpg‐C₃N₄ were characterized by N₂ adsorption–desorption, scanning electron microscopy (SEM). Among them, 40% HPW/mpg‐C₃N₄ displays the best catalytic performance in the alkylation reaction with 91.8% yield and 96.5% selectivity to 1, 2‐diphenylethylane. Moreover, protonated mpg‐C₃N₄ not only displays as a support to facilitate great dispersion of HPW but also promotes the alkylation product diffusion effectively. Besides, the HPW/mpg‐C₃N₄ catalyst could be recycled easily without significant loss of catalytic activity, which is demonstrate by the recyclability of HPW/mpg‐C₃N₄ catalyst test.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

烷基膦酸促进负载磷钨酸催化异丁烷/丁烯烷基化反应

异丁烷/丁烯烷基化是生产高辛烷值汽油的重要反应,目前主要采用液体强酸为催化剂,而固体催化剂用于该反应的性能均不理想。我们设计合成出十六烷基膦酸(HDPA)修饰的氧化硅负载型磷钨酸纳米多级结构催化剂(HDPA-HPW/SiO2),其结构与悬铃木果实相似。通过X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、透射电子显微镜镜(TEM)、氮气吸附-脱附、异丁烷吸附-脱附等对该催化剂进行了表征,并使用固定床微型反应器评价了其对异丁烷/丁烯烷基化反应的催化性能。结果表明,HDPA的外围修饰增强了催化剂对烃类反应物的吸附,减少了烯烃聚合副反应和催化剂表面积碳的产生,提高了高辛烷值产物的选择性,延长了催化剂的寿命。     

Click functionalization of magnetite nanoparticles: A new magnetically recoverable catalyst for the selective epoxidation of olefins

A new magnetically recoverable heterogeneous molybdenum catalyst was developed by means of a click chemistry approach. First, silica‐coated magnetite nanoparticles were functionalized using a bidentate ligand via thiol–ene click reaction of mercaptopropyl‐modified magnetite nanoparticles with acrylic acid. Then, a molybdenum complex was covalently supported on the surface of the clicked silica‐coated magnetite nanoparticles. The prepared catalyst was characterized using Fourier transform infrared and inductively coupled plasma optical emission spectroscopies, X‐ray diffraction, vibrating sample magnetometry and transmission electron microscopy. The catalytic performance of the prepared heterogeneous catalyst was investigated in the epoxidation of olefins with tert‐butyl hydroperoxide as oxidant. This catalyst could be reused for five runs without significant loss of activity and selectivity.     

Co(II), Fe(III) or VO(II) Schiff base metal complexes immobilized on graphene oxide for styrene epoxidation

Cobalt(II), iron(III) or oxovanadium(II) Schiff base metal complexes have been covalently grafted onto graphene oxide ( GO ) previously functionalized with 3‐aminopropyltriethoxysilane. Potential catalytic behaviors were tested in the epoxidation of styrene, using air as the oxidant. The catalysts were characterized using infrared (IR) and Raman spectroscopies, thermogravimetric analyses, inductively coupled plasma atomic emission spectrometry (ICP‐AES), X‐ray diffraction, nitrogen adsorption–desorption, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). IR spectroscopy, thermogravimetric analyses and ICP‐AES confirmed the successful incorporation of the metal Schiff base complexes onto GO . X‐ray diffraction, nitrogen adsorption–desorption, Raman spectroscopy, SEM and TEM showed the intact structure of the GO . Co-GO and Fe-GO showed high styrene conversion (90.8 versus 86.7%) and epoxide selectivity (63.7 versus 51.4%). Nevertheless, VO-GO showed poorer catalytic performance compared with Co-GO and Fe-GO . The recycling results of these heterogeneous catalysts showed good recoverability without significant loss of activity and selectivity within four successive runs. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of sulfamic acid supported on Fe3O4 nanoparticles: A green,versatile and magnetically separable acidic catalyst for oxidation reactions and Knoevenagel condensation

Sulfamic acid immobilized on diethylenetriamine functionalized Fe₃O₄ nanoparticles (SA‐DETA‐Fe₃O₄) was successfully prepared and characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), thermo gravimetric analysis (TGA), X‐Ray diffraction (XRD) and scanning electron microscopy (SEM). The sulfamic acid was found as a magnetically separable and highly active catalyst for the oxidative coupling thiols, oxidation of sulfides. Furthermore, the SA‐DETA‐Fe₃O₄ showed the high catalytic activity in Knoevenagel condensation of aromatic aldehydes with active methylene compounds (malononitrile and ethyl cynoacetate). The nanosolid catalyst could be easily recovered by a simple magnetic separation and reused for many cycles without deterioration in catalytic activity.     

Enhanced epoxidation of soybean oil by novel Al2O3–ZrO2–TiO2 solid acid catalyst

This study aims to develop highly efficient, recyclable solid catalysts for the epoxidation of vegetable oils. An Al₂O₃–ZrO₂–TiO₂ solid acid catalyst was prepared by a co‐precipitation/impregnation method and characterised through scanning electron microscopy, energy‐dispersive spectroscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy, Fourier‐transform infrared and nitrogen adsorption–desorption analyses. The solid acid catalyst with a high surface area and typical slit pore adsorption was successfully synthesised. Al₂O₃–ZrO₂–TiO₂ also exhibits high stability and improved catalytic efficiency in the epoxidation of soybean oil. An oil conversion rate of 86.6%, which is higher than that of conventional catalysts, was obtained with a catalyst loading of 0.8 wt% and was maintained at 76.6% even after recycling the catalyst three times. The performance of the solid catalyst was slightly superior to that of H₂SO₄. Therefore, this novel catalyst may potentially be applicable in catalysing soybean oil epoxidation.     

Highly efficient oxidative cleavage of alkenes and cyanosilylation of aldehydes catalysed by magnetically recoverable MIL‐101

The catalytic activity of magnetically recoverable MIL‐101 was investigated in the oxidation of alkenes to carboxylic acids and cyanosilylation of aldehydes. MIL‐101 was treated with Fe₃O₄ and the prepared catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, N₂ adsorption measurements, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy and inductively coupled plasma analysis. The catalytic active sites in this heterogeneous catalyst are Cr³⁺ nodes of the MIL‐101 framework. This heterogeneous catalyst has the advantages of excellent yields, short reaction times and reusability several times without significant decrease in its initial activity and stability in both oxidation and cyanosilylation reactions. Its magnetic property allows its easy separation using an external magnetic field.     

Biodiesel production via esterification of oleic acid catalyzed by MnO2@Mn(btc) as a novel and heterogeneous catalyst

The main objective of this study is to develop efficient and environmentally benign heterogeneous catalysts for biodiesel production. For this purpose, a heterogeneous MnO₂@Mn(btc) catalyst was prepared by the solvothermal method, and the prepared catalyst was tested for the esterification of oleic acid. Various techniques such as X‐ray diffraction, scanning and transmission electron microscopy, Brunauer–Emmett–Teller (BET) method, infrared spectroscopy, thermogravimetry, and NH₃‐TPD (temperature programmed desorption) analysis were employed for the characterization of the solid catalyst. The solid catalyst with MnO₂@Mn(btc) loading of 15% showed high catalytic activity and long durability in the esterification of oleic acid, in which the fatty acid methyl ester yield reached 98% consecutively for at least five cycles under mild conditions.     

Oxidation of ethylbenzene to styrene oxide in the presence of cellulose‐supported Pd magnetic nanoparticles

Palladium and Fe₃O₄ nanoparticles were deposited on N‐(2‐aminoethyl)acetamide‐functionalized cellulose for use in a catalytic reaction. The catalyst was characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, energy‐dispersive X‐ray analysis and transmission electron microscopy, and applied in the oxidation reaction of ethylbenzene at 100 °C using H₂O₂. Styrene oxide was obtained as the sole product of the oxidation reaction during 24 h. This reaction has some advantages such as one‐pot transformation of ethylbenzene to styrene oxide, high yield, excellent selectivity and magnetically recoverable catalyst. Also, the recovered catalyst could be used in the oxidation reaction four times without decrease in yield. Copyright © 2016 John Wiley & Sons, Ltd.     

热解二氧化钛/聚苯胺制备高效非贵金属氧还原电催化剂

为了克服传统Pt系催化剂价格昂贵、稳定性差的缺点,采用热解新型Ti O2/聚苯胺(PANI)复合物的方法合成了Ti O2/C催化剂.用扫描电子显微镜、X射线光电子能谱、X射线衍射、傅里叶变换红外光谱、拉曼光谱、透射电子显微镜、循环伏安法和线性扫描伏安法等方法研究了热处理和PANI复合比例对复合物的形貌、成键、晶相组成及氧还原性能的影响.结果表明,PANI与Ti O2间存在相互作用,可以抑制Ti O2的团聚和锐钛矿向金红石的转变.热处理制得Ti O2/C的氧还原活性随着PANI载体含量增加先升高后降低,PANI和Ti O2质量比为35/100时,催化剂的氧还原活性最高.同时,循环伏安和时间-电流曲线测试表明,已制备的复合材料在催化氧还原反应进行时具有较好的稳定性.     

碘酸改性溶胶凝胶法制备CuO/CeO2催化剂及富氢条件下催化CO氧化

采用一种碘酸改性的柠檬酸溶胶-凝胶法制备了CuO/CeO₂催化剂, 研究其在富氢气氛中CO优先氧化反应(CO-PROX)的催化活性. 与传统柠檬酸溶胶-凝胶法制备的催化剂相比, 碘酸改性溶胶-凝胶法制备的催化剂活性更好. 程序升温还原、 X射线衍射、 透射电子显微镜和X射线光电子能谱等表征证明该催化剂粒径较小, 表面含有更多的Ce³⁺及还原性氧化铜物种, 有利于提高催化剂的催化活性.     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

HPW/PDMAEMA‐b‐PMAA/ZIF‐8 Ternary Lamellar Composite and the Photocatalytic Degradation of Methylene Blue

PDMAEMA‐b‐PMAA block copolymers were prepared by the sequential RAFT polymerization of DMAEMA and tBMA, followed by hydrolysis. Phosphotungstic acid (HPW) was anchored to the PDMAEMA blocks through electrostatic interactions and the as‐obtained HPW/PDMAEMA‐b‐PMAA was added to the synthesis of ZIF‐8. During the formation of ZIF‐8, the PMAA blocks coordinated to the Zn²⁺ ions through their carboxy groups, along with the HPW groups that were anchored to the PDMAEMA blocks. In this way, the block copolymer could consolidate the interactions between HPW and ZIF‐8 and prevent the leakage of HPW. Finally, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite was obtained and the structure of the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 hybrid material was characterized by using powder X‐ray diffraction (PXRD), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). As a photocatalyst, the HPW/PDMAEMA‐b‐PMAA/ZIF‐8 ternary lamellar composite showed excellent photoactivity for the degradation of methylene blue (MB). The rate of degradation of MB was 0.0240 min^?1, which was 7.5‐times higher than that of commercially available P25 (0.0032 min^?1). In the presence of H₂O₂, the kinetic degradation parameters of the composite reached 0.0634 min^?1, which was about 19.8‐times higher than that of P25.