Spectrophotometric Study of Interaction in the System Sodium Dodecyl Sulfate-Cetylpyridinium Chloride-Methylene Blue

Complexation of a cationic dye (Methylene Blue) with anionic and cationic surfactants (sodium dodecyl sulfate and cetylpyridinium chloride) was studied spectrophotometrically. The formation constants of complexes formed in the system were estimated. Dispersion of the investigated system was studied as a function of time and cetylpyridinium chloride concentration.     

Titania nanowires as substrates for sensing and photocatalysis of common textile industry effluents

Sensing and photocatalysis of textile industry effluents such as dyes using mesoporous anatase titania nanowires are discussed here. Spectroscopic investigations show that the titania nanowires preferentially sense cationic (e.g. Methylene Blue, Rhodamine B) over anionic (e.g. Orange G, Remazol Brilliant Blue R) dyes. The adsorbed dye concentration on titania nanowires increased with increase in nanowire dimensions and dye solution pH. Electrochemical sensing directly corroborated spectroscopic findings. Electrochemical detection sensitivity for Methylene Blue increased by more than two times in magnitude with tripling of nanowire average length. Photodegradation of Methylene Blue using titania nanowires is also more efficient than the commercial P25-TiO₂ nanopowders. Keeping illumination protocol and observation times constant, the Methylene Blue concentration in solution decreased by only 50% in case of P25-TiO₂ nanoparticles compared to a 100% decrease for titania nanowires. Photodegradation was also found to be function of exposure times and dye solution pH. Excellent sensing ability and photocatalytic activity of the titania nanowires is attributed to increased effective reaction area of the controlled nanostructured morphology.     

Effect of micelles on the acid hydrolysis of N-phenylbenzohydroxamic acid

The effect of cationic (cetylpyridinium bromide and cetylpyridinium chloride) anionic (sodium dodecyl sulfate and lithium dodecyl sulfate) and non-ionic (Brij-35 and Triton-X-100) micelles on the acid-catalyzed hydrolysis of N-phenylbenzohydroxamic acid in 20 vol.% dioxane medium has been investigated. The kinetic results are explained by both pseudo-phase and Piszkiewicz cooperativity models.     

Reduction of methylene blue and related dyes by gamma-irradiated alkali halides

A spectrophotometric study is reported of the reduction of some dyes having the methylene blue structure used in bacteriological staining. The reduction is effected by the species liberated during the dissolution of -irradiated sodium chloride, in the same way as by direct low -dose. The G values for the two modes of the reduction are compared and the effects of radical scavengers on the reactions are studied. Results are found to be similar to the chemically and biologically induced reductions. The dyes studied include besides Methylene Blue, Janus Green B and Nile Blue sulfate.     

Adsorption of methylene blue and orange II onto unmodified and surfactant-modified zeolite

Adsorption of cationic methylene blue and anionic orange II onto unmodified and surfactant-modified zeolites was studied using a batch equilibration method. The effects of equilibrium time, solution pH, and sorption temperature were examined. The results suggested that 2% sodium dodecyl benzenesulfonate (SDBS)- and 3% sodium dodecyl sulfate (SDS)-modified zeolites had higher adsorption capacities for methylene blue than the unmodified zeolite, while 2% cetylpyridinium bromide hexadecyl (CPB)- and 2% hexadecylammonium bromide (HDTMA)-modified zeolites were the best adsorbents for orange II. The adsorption conditions were optimized, and the mechanisms of adsorption are briefly discussed.     

室温离子液体浸取分离牛磺酸与硫酸钠固体混合物

在多种1,3-二烷基咪唑室温离子液体中考察了牛磺酸的溶解性能,并利用对牛磺酸溶解度较大的氯化1-甲基-3-丁基咪唑离子液体([C₄MIm]Cl)为浸取剂,在较温和条件下实现了硫酸钠和牛磺酸固体混合物的分离.浸取得到的溶有牛磺酸的离子液体经乙醇离析后可高产率地得到牛磺酸(＞98.5%),纯度超过99.5%.此方法简化了牛磺酸/硫酸钠固体混合物的分离,离子液体可以重复使用多次.     

UV-Vis spectroscopic and chemometric study on the aggregation of ionic dyes in water

The monomer-dimer equilibrium in several ionic dyes (Methylene Blue, Acridine Orange, Nile Blue A, Neutral Red, Rhodamine 6G and Safranine O) has been investigated by means of UV-Vis spectroscopy. The data have been processed by a recently developed method for quantitative analysis of undefined mixtures, based on simultaneous resolution of the overlapping bands in the whole set of absorption spectra. In the cases of Acridine Orange a second chemometric approach has been used as a reference. It is based on a decomposition of the recorded spectra into a product of target and projection matrices using non iterative partial least squares (NIPALS). The matrices are then rotated to give the correct concentrations, spectral profiles of the components and the equilibrium constant. The dimeric constants determined by the two methods were in excellent agreement, evidencing the accuracy of the analysis. From the calculated dimeric constant and monomer and dimer spectra, the structures of the dimeric forms of the studied dyes are estimated.     

Surface chemical modification to control molecular interactions with porous silicon

Interactions between porous silicon (pSi) particles and probe molecules were evaluated to determine the effect of pSi and probe molecule chemistry on adsorption. Methylene blue, ethyl violet and orange G dyes were chosen for investigation as they possess distinct functionalities and charges. Several distinct pSi surface species were produced via thermal oxidation at 200-800 °C and their effect on adsorption investigated. The adsorption mechanisms were elucidated from equilibrium adsorption and desorption isotherms. Methylene blue adsorption was attributed to electrostatic attraction where a gradual increase in adsorption with oxidation temperature was observed. Significant methylene blue desorption was observed at pH 3, confirming adsorption occurs via electrostatic attraction. Ethyl violet demonstrated an increase in plateau adsorption capacity and affinity with increased oxidation temperatures and adsorption was initially attributed to electrostatic attraction, however desorption of ethyl violet was not observed, thus indicating potential chemisorption. Orange G exhibited high affinity adsorption for Si(y)SiH(x) terminated surfaces but no orange G desorption was detected, indicating a chemisorption adsorption mechanism. It has been successfully demonstrated that the surface modification of pSi enabled the manipulation of molecular interactions. By interacting probe molecules with similar functionalities to drug molecule with pSi, greater understanding of drug-pSi interactions can be ascertained which are of great importance. pSi surface chemistry can be tailored to enable control over molecular interactions and ultimately dictate loading, encapsulation and release behavior.     

Local Extraction and Condensation under a Microscope Using the Optically Controlled Phase Separation of a Thermoresponsive Polymer

In‐situ extraction and condensation of various dyes were carried out in a phase‐separation region of a thermoresponsive polymer aqueous solution generated by near infrared (NIR) laser heating under a microscope. The NIR laser irradiation was directed at a chromium line deposited on a glass substrate, thereby causing local heating of the solution due to the photothermal effect. A phase‐separation region was formed by dehydration of the thermoresponsive polymer followed by ejection of water outside of the phase‐separation region. When various dyes were included in the solution, some dye molecules were extracted into the phase‐separation region, where they condensed. In the case of poly(N‐isopropylacrylamide) (PNIPAM, 10 wt % in an aqueous solution) as the thermoresponsive polymer and crystal violet (CV) as the dye (0.1 mM ), CV condensed by about 25 times. It was found that one of the necessary conditions for the extraction/condensation is the hydrophobicity of the dye molecule; however, the dominant cause for accumulating inside the PNIPAM chain is the molecular interaction between the amide group in the side chain of PNIPAM and the functional groups such as carbonyl or amino groups in the dye molecules.     

Use of Aqueous Micellar Mobile Phases in Reverse Phase TLC

Abstract

Aqueous micellar solutions can be used in reverse phase TLC providing the ionic strength of the solution is sufficiently high to prevent the destruction of the stationary phase. Stability curves have been determined for sodium dodecyl sulfate and cetyltrimethylammonium chloride containing aqueous mobile phases. These “pseudophase” solutions allow the unique separation of hydrophobic from hydrophilic compounds. Indeed one can estimate the relative hydrophobicity of a compound by observing its chromatographic behavior in this system.     

Determination of alkylphenols and alkylphenol carboxylates in wastewater and river samples by hemimicelle-based extraction and liquid chromatography-ion trap mass spectrometry

Sodium dodecyl sulfate (SDS)-coated alumina and cetylpyridinium chloride (CPC)-coated silica were investigated as new sorbents for the concentration of alkylphenol polyethoxylate (APE) biodegradation products from wastewater and river water samples. Octylphenol (OP), nonylphenol (NP), octylphenol carboxylic acid (OPC) and nonylphenol carboxylic acid (NPC) were quantitatively retained on both supramolecular sorbents on the basis of the formation of mixed hemimicelles and admicelles. SDS hemimicelles-based SPE was proposed for the extraction/concentration of the target compounds prior to their separation and quantitation by liquid chromatography/electrospray ionization in negative mode, ion trap mass spectrometry. No clean-up steps or evaporation of the eluent were required. The recovery of APE metabolites from sewage and river water ranged between 87 and 100%. Concentration factors of about 500, using sample volumes of 1 l, were achieved. Detection limits were between 75 and 193 ng/l. The approach developed was applied to the determination of alklylphenols and alkylphenol carboxylic acids in raw and treated sewage and river samples. The concentrations of APE metabolites found ranged between 0.8 and 78 microg/l.     

样品溶液基质对毛细管电泳分离的影响

用样品苯甲醇，苯甲醛和苯甲酸研究了样品溶液基质十二烷基硫酸钠，磷酸二氢钾－四硼酸钠和乙醇对毛细管电泳分离的影响。实验结果显示，随着样品溶液基质种类和浓度的变化，非离子型的苯甲醇和苯甲醛的毛细管电泳分离有相同的变化规律，离子型的苯甲酸有相反的变化规律。乙醇的添加导致了三个组份的区带扩张。     

Methods for radiochemical and radionuclidic purity determination of some99mTc and113mIn radiopharmaceuticals

In order to determine the radiochemical impurities in pertechnetate solution as well as that of unbound^99mTc in its colloid and complex compounds, in indium chloride solution and related compounds, paper chromatography on Whatman No. 1, thin-layer chromatography on silica gel plates, and paper electrophoresis were applied. A simple method for the determination of radionuclidic purity was developed.     

Residue Analysis of Fluroxypyr-meptyl in Wheat and Soil by GC�CECD

C-Phycocyanin is a natural blue pigment with many commercial applications in foods, cosmetics, and medicines. In this paper we describe the extraction and purification of C-phycocyanin from the cyanobacterium Spirulina platensis. The procedure is based on adsorption of impurities with chitosan and activated charcoal then one-step ion-exchange chromatography. The dry algal powder was soaked in potassium phosphate buffer for 2?h to furnish crude phycocyanin extract of purity 0.93. The crude extract was then treated with chitosan and activated charcoal for 5?min, which increased the purity to 2.78. After chromatography on DEAE Sephadex A-25, the purity of phycocyanin was improved to 4.3. The identity of the purified phycocyanin was confirmed by sodium dodecyl sulfate?Cpolyacrylamide gel electrophoretic analysis and by spectroscopic measurements (UV?Cvisible spectrophotometry and spectrofluorimetry). Compared with conventional methods, this method was simple, inexpensive, and time-saving.     

Determination of zirconium and hafnium with xylenol orange and methylthymol blue

Both Xylenol Orange and Methylthymol Blue are highly selective and sensitive reagents for zirconium and hafnium forming intensely red complexes in an acidic medium. The factors affecting the color formation have been studied. The properties of the complexes have been determined and compared. In general, zirconium forms a more stable complex with the two dyes than hafnium, and Xylenol Orange forms a stronger complex with either zirconium or hafnium than Methylthymol Blue. Hydrogen peroxide can completely mask the zirconium complexes of either dye but only slightly affects the hafnium complex of Xylenol Orange. Zirconium and hafnium can both be determined without separation using peroxide as a masking agent and sulfate as a demasking agent. A bleaching reaction was observed when small amounts of hafnium were added to the red zirconium complex of Methylthymol Blue in 2.4 N perchloric acid or a small amount of zirconium was added to the red hafnium complex of Methylthymol Blue solution at pH 2 to 3.     

Extraction of metal–dye ion-association complexes by thin ether-type polyurethane membranes

The extraction and transport of various gold(III) chloride–organic dye ion-association complexes in aqueous solution through thin ether-type polyurethane membranes have been studied. The effects of the presence of salt, acid, different starting and receiving solution compositions, and temperature on the sorption process were investigated. Methylene Blue, Rhodamine B and Brilliant Green, which represent organic dyes from the thiazine, xanthene, and triphenylmethane groups, respectively, were used for this study. Gold(III) chloride and the individual organic dyes were extracted and transported through the membrane only if the solution conditions favored the formation of a neutral species. The ion-association complexes of gold(III) chloride with Methylene Blue and Rhodamine B were extracted and transported by the polymer only when the formation of the complex was more efficient than the individual extraction and transport of each of the species. The extraction of Brilliant Green under all conditions studied was very high, however, no transport occurred. The overall sorption of this dye was found to be independent of the presence of gold regardless of solution composition. High temperature resulted in a very high rate of transport of the gold(III) chloride–organic dye ion-pair.     

Wastewater purification to remove dyes with monocation-substituted forms of bentonite and flocculants-coagulants

Possibility of performing sorption-coagulation purification of model wastewater to remove cationactive dyes (Rhodamine G, Methylene blue, thionine, and fuchsine) with bentonite sorbents and Gyanja flocculant-coagulant was studied. The effect of the nature and charge of exchange cations on the sorptioncoagulation capacity of bentonite samples was examined.     

Water treatment to remove acid and basic dyes by biosorption on polysaccharide composites

A composite material based on cross-linked cationic starch and sodium alginate was synthesized and studied. The composite is an effective biosorbent for removing various types of synthetic dyes from water. The influence exerted on adsorption of a basic dye (Methylene Blue) and an acid dye (Methyl Orange) by temperature, pH, solution ionic strength, and biosorbent amount was examined, and the dye adsorption kinetics was studied. The adsorption isotherms were analyzed using various models of sorption equilibrium.     

Nanotube Content in Arc Generated Carbon Powder

 A novel experimental technique for the separation of nanotubes from other unwanted carbon species in arc generated carbon soot is described. A conjugated polymer was used to bind to nanotubes in solution. The resultant hybrid was soluble, whereas extraneous carbon material formed a sediment at the bottom of the sample bottle. The process was monitored using electron paramagnetic resonance (EPR) spectroscopy showing that 63% of nanotubes were kept in solution and 98.1% of impurities were rejected. This non-destructive purification allowed the calculation of the nanotube content in the carbon soot using EPR and thermogravimetric analysis (TGA). The measurement of nanotube content gave a purity value of 34% for the soot used in this study; this is compatible with estimates from electron microscopic determinations.     

Triphenylene-modified chitosan: novel high efficient sorbent for cationic and anionic dyes

The first example of triphenylene-modified chitosan 4 was prepared by reacting chitosan with triphenylene aldehyde derivative 3. Its structure and morphology was characterized by elemental analysis, ¹H NMR, FTIR, XRD, SEM and AFM image. The triphenylene units in Tp-chitosan 4 appended on the skeleton of chitosan and possessed orderly layered structure. Adsorption experiments of Tp-chitosan 4 indicated that it possessed excellent adsorption capacities for both cationic and anionic dyes [Orange G sodium salt, Brilliant ponceau 5R, Victoria blue B (VB), Crystal violet (CV), Neutral red (NR) and Methylene blue]. The highest adsorption capacities for CV, VB and NR were 5.612, 5.353 and 5.375 mmol/g, respectively. Adsorption kinetics and isotherms analysis showed that the adsorption processes obeyed pseudo second-order model and the Langmuir isotherm equation. The adsorption processes were exothermic and spontaneous. The best pH values for adsorption were pH = 6–8.