A Butterfly‐Inspired Hierarchical Light‐Trapping Structure towards a High‐Performance Polarization‐Sensitive Perovskite Photodetector

Extensive applications for photodetectors have led to demand for high‐responsivity polarization‐sensitive light detection. Inspired by the elaborate architecture of butterfly Papilio paris, a 1D nanograting bonded porous 2D photonic crystal perovskite photodetector (G‐PC‐PD) using a commercial DVD master and 2D crystalline colloidal arrays template was fabricated. The coupling effect from grating diffraction and reflection of the PC stopband renders the enhanced light harvesting of G‐PC‐PD. The porous scaffold and nanoimprinting process afford a highly crystalline perovskite film. White light responsivity and detectivity of G‐PC‐PD are up to 12.67 A W^?1 and 3.22×10¹³ Jones (6～7 times that of a pristine perovskite photodetector). The highly ordered nanograting arrays of G‐PC‐PD enable polarization‐sensitive light detection with a rate of ?0.72 nA deg^?1. This hierarchical perovskite integrated nanograting and 2D PC architecture opens a new avenue to high‐performance optoelectronic devices.     

Highly Efficient,Reproducible, Uniform (CH3NH3)PbI3 Layer by Processing Additive Dripping for Solution‐Processed Planar Heterojunction Perovskite Solar Cells

A processing additive dripping (PAD) approach to forming highly efficient (CH₃NH₃)PbI₃ (MAPbI₃) perovskite layers was investigated. A MAPbI₃(CB/DIO) perovskite film fabricated by this approach, which included briefly dripping chlorobenzene incorporating a small amount of diiodooctane (DIO) during casting of a MAPbI₃ perovskite precursor dissolved in dimethylformamide, exhibited superior smooth, uniform morphologies with high crystallinity and large grains and revealed completely homogeneous surface coverage. The surface coverage and morphology of the substrate significantly affected the photovoltaic performance of planar heterojunction (PHJ) perovskite solar cells (PrSCs), resulting in a power conversion efficiency of 11.45 % with high open‐circuit voltage of 0.91 V and the highest fill factor of 80.87 %. Moreover, the PAD approach could effectively provide efficient MAPbI₃(CB/DIO) perovskite layers for highly efficient, reproducible, uniform PHJ PrSC devices without performance loss or variation even over larger active areas.     

In CH3NH3PbI3 Perovskite Film,the Surface Termination Layer Dominates the Moisture Degradation Pathway

Theoretical studies have shown that surface terminations, such as MAI or PbI layers, greatly affect the environmental stability of organic–inorganic perovskite. However, until now, there has been little effort to experimentally detect the existence of MAI or PbI terminations on MAPbI₃ grains, let alone disclose their effects on the humidity degradation pathway of perovskite solar cell. Here, we successfully modified and detected the surface terminations of MAI and PbI species on polycrystalline MAPbI₃ films. MAI-terminated perovskite film followed the moisture degradation process from MAPbI₃ to hydrate MAPbI₃⋅H₂O and then into PbI₂, with penetration of water molecules being the main driving force leading to the degradation of MAPbI₃ layer by layer. In contrast, for the PbI-terminated perovskite film in a humid atmosphere, a deprotonation degradation pathway was confirmed, in which the film preferentially degraded directly from MAPbI₃ into PbI₂, here the iodine defects played a key role in promoting the dissociation of water molecules into OH⁻ and further catalyzing the decomposition of perovskite.     

Steric Mixed‐Cation 2D Perovskite as a Methylammonium Locker to Stabilize MAPbI3

The reduced dimension perovskite including 2D perovskites are one of the most promising strategies to stabilize lead halide perovskite. A mixed‐cation 2D perovskite based on a steric phenyltrimethylammonium (PTA) cation is presented. The PTA‐MA mixed‐cation 2D perovskite of PTAMAPbI₄ can be formed on the surface of MAPbI₃ (PTAI‐MAPbI₃) by controllable PTAI intercalation by either spin coating or soaking. The PTAMAPbI₄ capping layer can not only passivate PTAI‐MAPbI₃ perovskite but also act as MA⁺ locker to inhibit MAI extraction and significantly enhance the stability. The highly stable PTAI‐MAPbI₃ based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion PCE of 21.16 %. Such unencapsulated devices retain 93 % of initial efficiency after 500 h continuous illumination. This steric mixed‐cation 2D perovskite as MA⁺ locker to stabilize the MAPbI₃ is a promising strategy to design stable and high‐performance hybrid lead halide perovskites.     

Stereochemically Active Lone Pair Induced Polar Tri-layered Perovskite for Record-Performance Polarized Photodetection

Bulk photovoltaic effect, a promising optoelectronic phenomenon for generating polarized dependent steady-state photocurrent, has been widely applied in various photodetectors. However, incorporating stereochemically active lone pair to construct bulk photovoltage in organic-inorganic hybrid perovskite (OIHP) is still elusive and challenging. Herein, bulk photovoltage (1.2 V) has been successfully achieved by introducing the stereo-chemically active lone pair perovskitizer to construct a polar tri-layered hybrid perovskite, namely, (IBA)₂MHy₂Pb₃Br₁₀ ( 1 , IBA=iso-butylamine, MHy=methylhydrazine). Strikingly, owning to the promising bulk photovoltage, 1 -based detectors exhibit an ultra-highly sensitive polarized photodetection (polarization ratio of up to 24.6) under self-powered mode. This ratio surpasses all the reported two-dimension OIHP single-crystal photodetectors. In addition, detectors exhibit outstanding responsivity (≈200 mA W⁻¹) and detectivity (≈2.4×10¹³ Jones). More excitingly, further investigation confirms that lone pair electrons in MHy⁺ result in the separation of positive and negative charges to produce directional dipoles, which further directional alignment to generate bulk photovoltage, thereby resulting in polarization-dependent photocurrent. Our findings provide a new demonstration for polar multilayer materials’ construction and may open opportunities for a host of high-sensitive polarized photodetection.     

Halide Double Perovskite Ferroelectrics

Halide double perovskites have recently emerged as a promising environmentally friendly optoelectronic and photovoltaic material for their inherent thermodynamic stability, high defect tolerance, and appropriate band gaps. However, to date, no ferroelectric material based on halide double perovskites has been discovered. Herein, by hetero‐substitution of lead and cation intercalation of n‐propylamine, the first halide double perovskite ferroelectric, (n‐propylammonium)₂CsAgBiBr₇ ( 1 ), is reported and it exhibits distinct ferroelectricity with a notable saturation polarization of about 1.5 μC cm^?2. More importantly, single‐crystal photodetectors of 1 exhibit extraordinary performance with containing high on/off ratios of about 10⁴, fast response rates of 141 μs, and detectivity as high as 5.3×10¹¹ Jones. This finding opens a new way to design high‐performance perovskite ferroelectrics, and provides a viable approach in the search for stable and lead‐free optoelectronic materials as an alternative to the lead‐containing system.     

Electrocatalytic Reduction and Determination of Iodate and Periodate at Silicomolybdate‐Incorporated‐Glutaraldehyde‐ Cross‐Linked Poly‐L‐lysine Film Electrodes

The present work describes reduction of iodate (IO₃^?), and periodate (IO₄^?) at silicomolybdate‐doped‐glutaraldehyde‐cross‐linked poly‐L ‐lysine (PLL‐GA‐SiMo) film coated glassy carbon electrode in 0.1 M H₂SO₄. In our previous study, we were able to prepare the PLL‐GA‐SiMo film modified electrode by means of electrostatically trapping SiMo₁₂O₄₀^4? mediator in the cationic film of PLL‐GA, and the voltammetric investigation in pure supporting indicated that the charge transport through the film was fast. Here, the electrocatalytic activity of PLL‐GA‐SiMo film electrode towards iodate and periodate was tested and subsequently used for analytical determination of these analytes by amperometry. The two electron reduced species of SiMo₁₂O₄₀^4? anion was responsible for the electrocatalytic reduction of IO₃^? at PLL‐GA‐SiMo film electrode while two and six electron reduced species were showed electrocatalytic activity towards IO₄^? reduction. Under optimized experimental conditions of amperometry, the linear concentration range and sensitivity are 2.5×10^?6 to 1.1×10^?2 M and 18.47 μA mM^?1 for iodate, and 5×10^?6 to 1.43×10^?4 M and 1014.7 μA mM^?1 for periodate, respectively.     

The Role of Surface Termination in Halide Perovskites for Efficient Photocatalytic Synthesis

Halide perovskites have received attention in the field of photocatalysis owing to their excellent optoelectronic properties. However, the semiconductor properties of halide perovskite surfaces and the influence on photocatalytic performance have not been systematically clarified. Now, the conversion of triose (such as 1,3‐dihydroxyacetone (DHA)) is employed as a model reaction to explore the surface termination of MAPbI₃. By rational design of the surface termination for MAPbI₃, the production rate of butyl lactate is substantially improved to 7719 μg g^?1 cat. h^?1 under visible‐light illumination. The MAI‐terminated MAPbI₃ surface governs the photocatalytic performance. Specially, MAI‐terminated surface is susceptible to iodide oxidation, which thus promotes the exposure of Pb^II as active sites for this photocatalysis process. Moreover, MAI‐termination induces a p‐doping effect near the surface for MAPbI₃, which facilitates carrier transport and thus photosynthesis.     

Dithieno[3,2‐b:2′,3′‐d]pyrrole Cored p‐Type Semiconductors Enabling 20 % Efficiency Dopant‐Free Perovskite Solar Cells

Organic p‐type semiconductors with tunable structures offer great opportunities for hybrid perovskite solar cells (PVSCs). We report herein two dithieno[3,2‐b:2′,3′‐d]pyrrole (DTP) cored molecular semiconductors prepared through π‐conjugation extension and an N‐alkylation strategy. The as‐prepared conjugated molecules exhibit a highest occupied molecular orbital (HOMO) level of ?4.82 eV and a hole mobility up to 2.16×10^?4 cm² V^?1 s^?1. Together with excellent film‐forming and over 99 % photoluminescence quenching efficiency on perovskite, the DTP based semiconductors work efficiently as hole‐transporting materials (HTMs) for n‐i‐p structured PVSCs. Their dopant‐free MA_0.7FA_0.3PbI_2.85Br_0.15 devices exhibit a power conversion efficiency over 20 %, representing one of the highest values for un‐doped molecular HTMs based PVSCs. This work demonstrates the great potential of using a DTP core in designing efficient semiconductors for dopant‐free PVSCs.     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Voltammetric Determination of 3‐Nitrofluoranthene and 3‐Aminofluoranthene at Boron Doped Diamond Thin‐Film Electrode

The voltammetric behavior of 3‐nitrofluoranthene and 3‐aminofluoranthene was investigated in mixed methanol‐water solutions by differential pulse voltammetry (DPV) at boron doped diamond thin‐film electrode (BDDE). Optimum conditions have been found for determination of 3‐nitrofluoranthene in the concentration range of 2×10^?8–1×10^?6 mol L^?1, and for determination 3‐aminofluorathnene in the concentration range of 2×10^?7–1×10^?5 mol L^?1, respectively. Limits of determination were 3×10^?8 mol L^?1 (3‐nitrofluoranthene) and 2×10^?7 mol L^?1 (3‐aminofluoranthene).     

Two‐Dimensional Conjugated Polymer Synthesized by Interfacial Suzuki Reaction: Towards Electronic Device Applications

Preparing two‐dimensional conjugated polymers (2DCPs) with desirable structures and semiconducting properties is promising but remains a great challenge. Presented here is a new 2DCP, named 2D polytriethyltriindole (2DPTTI), which is efficiently synthesized by a modified interfacial Suzuki reaction from 2,7,12‐tribromo‐5,10,15‐triethyltriindole (2‐BrTTI) and 1,4‐benzenediboronic acid dipinacol ester (BADE) precursors at room temperature. Wafer‐scale free‐standing 2DPTTI films with controllable thicknesses between 2.5 and 46.0 nm were obtained by adjusting the experimental conditions. The resulting 2DPTTI films, used as an active layer in organic field effect transistors (OFETs), exhibited typical p‐type semiconducting properties and superior UV optoelectronic performance with a photosensitivity of 3.7×10³ and responsivity of 1.4×10³ A W^?1, as well as a light‐blue fluorescence character. This report provides a general approach for constructing various semiconducting 2DCPs, by an interfacial Suzuki reaction, towards multifunctional organic electronics.     

Non‐Resonant z‐Scan Characterization of the Third‐Order Nonlinear Optical Properties of Conjugated Poly(thiophene azines)

The nonlinear optical properties of a functionalized poly(thiophene azine), namely, poly(3,4‐didodecylthiophene azine), PAZ, at the optical telecommunication wavelength of 1550 nm are investigated by means of the closed‐aperture z‐scan technique in both thin films and solutions. Values of χ⁽³⁾=(2.4±0.4)×10^?13 esu, n₂=(4.0±0.7)×10^?15 cm² W^?1, and γ=(4.5±0.7)×10^?34 esu are estimated for the third‐order (Kerr) susceptibility, the intensity‐dependent refractive index, and the molecular second hyperpolarizability of solution samples, respectively. A very small dependence on the polymer chain length is found. Markedly higher values of (4.4±1.1)×10^?11 esu, (6.6±1.0)×10^?13 cm² W^?1, and (5.0±0.8)×10^?33 esu are measured for the corresponding quantities in thick (up to 20 μm) polymer films cast on quartz plates. The enhancement of the NLO responses on going from solution to solid samples is attributed to a partially ordered structure and to the presence of interchain interactions leading to greater π‐electron delocalization in the cast polymer films. The results are compared with those previously obtained by using third‐harmonic generation (THG), taking into account that those data were measured under conditions of three‐photon resonance, whereas our z‐scan measurements are fully off‐resonance.     

Blue‐light‐emitting polyfluorene functionalized with triphenylamine and cyanophenylfluorene bipolar side chains

A new bipolar conjugated polyfluorene copolymer with triphenylamine and cyanophenylfluorene as side chains, poly{[9,9‐di(triphenylamine)fluorene]‐[9,9‐dihexyl‐fluorene]‐[2,7‐bis(4′‐cyanophenyl)‐9,9′‐spirobifluorene]} ( PTHCF ), was synthesized for studying the polymer backbone emission. Its absolute weight‐average molecular weight was determined as 4.85 × 10⁴ by using gel permeation chromatography with a multiangle light scattering detector. In contrast to the electronic absorption spectrum in dilute solution, the absorbance of PTHCF in thin film was slightly blue shifted. By comparison of the solution and thin‐film photoluminescence (PL) spectra, a red shift of Δλ = 8–9 nm was observed in the thin‐film PL spectrum. The HOMO and LUMO energy levels of the resulting polymer were electrochemically estimated as ?5.68 and ?2.80 eV, respectively. Under the electric‐field intensity of 4.8 × 10⁵ V cm^?1, the obtained hole and electron mobilities were 2.41 × 10^?4 and 1.40 × 10^?4 cm² V^?1 s^?1, respectively. An electroluminescence device with configuration of ITO/PEDOT:PSS/ PTHCF _70%+PBD_30%/CsF/Ca/Al exhibited a deep‐blue emission as a result of excitons formed by the charges migrating along the full‐fluorene main chain. The incorporation of the bipolar side chains into the polymer structure prevented the intermolecular interaction of the fluorene moieties, balance charge injection/transport, and thereby improve the polymer backbone emission. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of poly(1,4‐bis((E)‐2‐(3‐dodecylthiophen‐2‐yl)vinyl)benzene) derivatives

New amorphous semiconducting copolymers, poly(9,9‐dialkylfluorene)‐alt‐(3‐dodecylthienyl‐divinylbenzene‐3‐dodecylthienyl) derivatives (PEFTVB and POFTVB), were designed, synthesized, and characterized. The structure of copolymers was confirmed by H NMR, IR, and elemental analysis. The copolymers showed very good solubility in organic solvents and high thermal stability with high T_g of 178–185 °C. The weight average molecular weight was found to be 107,900 with polydispersity of 3.14 for PEFTVB and 76,700 with that of 3.31 for POFTVB. UV–vis absorption studies showed the maximum absorption at 428 nm (in solution) and 435 nm (in film) for PEFTVB and at 430 nm (in solution) and 436 nm (in film) for POFTVB. Photoluminescence studies showed the emission at 498 nm (in solution) and 557 nm (in film) for PEFTVB and at 498 nm (in solution) and 536 nm (in film) for POFTVB. The solution‐processed thin‐film transistors showed the carrier mobility of 2 × 10^?4 cm² V^?1 s^?1 for PEFTVB‐based devices and 2 × 10^?5 cm² V^?1 s^?1 for POFTVB‐based devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3942–3949, 2010     

A Visible‐Light Driven Photoelectrochemical Aptasensor for Endocrine Disrupting Chemicals Bisphenol A with High Sensitivity and Specificity

A visible‐light driven photoelectrochemical (PEC) sensor based on aptamer immobilized TiO₂‐Fe₂O₃ nanotubes was proposed for the first time and highly sensitive and selective bisphenol A determination was realized. Taking advantage of the alloy oxide nanotube structure, high surface area, good biocompatibility, superior photoelectrocatalytic performance, a limit of detection toward BPA as low as 1.8×10^?11 M with linearity in the range from 1.8×10^?11 to 3.2×10^?9 M could be achieved. Specificity was greatly exhibited for this aptasensor under 100‐fold excess concentration of estriol, resorcinol, nonylphenol, 2,4‐D, acetamiprid, chlorpyrifos and omethoate. Simultaneously, satisfactory results were obtained in real water sample investigation from industrial plastics and drinking water. A novel visible‐light driven PEC method for highly sensitive and selective detection of BPA was thus established.     

3,4‐Phenylenedioxythiophene (PheDOT) Based Hole‐Transporting Materials for Perovskite Solar Cells

Two new electron‐rich molecules based on 3,4‐phenylenedioxythiophene (PheDOT) were synthesized and successfully adopted as hole‐transporting materials (HTMs) in perovskite solar cells (PSCs). X‐ray diffraction, absorption spectra, photoluminescence spectra, electrochemical properties, thermal stabilities, hole mobilities, conductivities, and photovoltaic parameters of PSCs based on these two HTMs were compared with each other. By introducing methoxy substituents into the main skeleton, the energy levels of PheDOT‐core HTM were tuned to match with the perovskite, and its hole mobility was also improved (1.33×10^?4 cm² V^?1 s^?1, being higher than that of spiro‐OMeTAD, 2.34×10^?5 cm² V^?1 s^?1). The PSC based on MeO‐PheDOT as HTM exhibits a short‐circuit current density (J_sc) of 18.31 mA cm^?2, an open‐circuit potential (V_oc) of 0.914 V, and a fill factor (FF) of 0.636, yielding an encouraging power conversion efficiency (PCE) of 10.64 % under AM 1.5G illumination. These results give some insight into how the molecular structures of HTMs affect their performances and pave the way for developing high‐efficiency and low‐cost HTMs for PSCs.     

High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation

Defect passivation has been demonstrated to be effective in improving the radiative recombination of charge carriers in perovskites, and consequently, the device performance of the resultant perovskite light‐emitting diodes (LEDs). State‐of‐the‐art useful passivation agents in perovskite LEDs are mostly organic chelating molecules that, however, simultaneously sacrifice the charge‐transport properties and thermal stability of the resultant perovskite emissive layers, thereby deteriorating performance, and especially the operational stability of the devices. We demonstrate that lithium halides can efficiently passivate the defects generated by halide vacancies and reduce trap state density, thereby suppressing ion migration in perovskite films. Efficient green perovskite LEDs based on all‐inorganic CsPbBr₃ perovskite with a peak external quantum efficiency of 16.2 %, as well as a high maximum brightness of 50 270 cd m^?2, are achieved. Moreover, the device shows decent stability even under a brightness of 10⁴ cd m^?2. We highlight the universal applicability of defect passivation using lithium halides, which enabled us to improve the efficiency of blue and red perovskite LEDs.     

[Cu(L)](NO3)2 (L=4,7‐Bis(3‐aminopropyl)‐1‐thia‐4,7‐diazacyclononane) as a Suitable Ionophore for Construction of Thiocyanate‐Selective Electrodes and Their Use in Determination of Urinary and Salivary Thiocyanate Concentration

The construction, performance characteristics, and application of polymeric membrane (PME) and coated graphite (CGE) thiocyanate‐selective electrodes are reported. The electrodes were prepared by incorporating the complex [Cu(L)](NO₃)₂ (L=4,7‐bis(3‐aminopropyl)‐1‐thia‐4,7‐diazacyclononane) into a plasiticized poly(vinyl chloride) membrane. The influence of membrane composition, pH of test solution, and foreign ions were investigated. The electrodes reveal Nernstian behavior over a wide SCN^? ion concentration range (1.0×10^?6–1.0×10^?1 M for PME and 5.0×10^?7–1.0×10^?2 M for CGE) and show fast dynamic response times of 15 s and lower. The proposed sensors show high selectivity towards thiocyanate over several common organic and inorganic anions. They were successfully applied to the direct determination of thiocyanate in urine and saliva of smokers and nonsmokers, and as an indicator electrode in titration of Ag⁺ ions with thiocyanate.     

Thin‐Film Transformation of NH4PbI3 to CH3NH3PbI3 Perovskite: A Methylamine‐Induced Conversion–Healing Process

Methylamine‐induced thin‐film transformation at room‐temperature is discovered, where a porous, rough, polycrystalline NH₄PbI₃ non‐perovskite thin film converts stepwise into a dense, ultrasmooth, textured CH₃NH₃PbI₃ perovskite thin film. Owing to the beneficial phase/structural development of the thin film, its photovoltaic properties undergo dramatic enhancement during this NH₄PbI₃‐to‐CH₃NH₃PbI₃ transformation process. The chemical origins of this transformation are studied at various length scales.